Assignment Profit Center to Plant on material master for Production Order

Hi Experts
Can you help me !
Now I'm trying to lock a profit center to the plant.I've tried searching on the standard menu and customizing but do not get it ?
How to assignment profit center to plant or plant to profit center.
Regards
Dodo M

Hello Dodo,
1.
You can make an assigment between the profit center and the plant in Customizing (SPRO) in two steps (through the company code), under the following menu path:
Step 1:
Enterprise Structure
Assignment
  Financial Accounting
   Assign Profit Center to Company Code
Step 2:
Enterprise Structure
Assignment
  Logistics - General
   Assign plant to company code
So, first you assign the profit center to the company code, then you assign the plant to the company code.
2.
Or you can use the Enhancement MGA00001 for implementing your own check in function module EXIT_SAPLMGMU_001.
You can also check the following help to understand the relationships in details:
Controlling (CO) - SAP Library
http://help.sap.com/saphelp_erp60_sp/helpdata/en/02/30793485231774e10000009b38f83b/frameset.htm
Best Regards,
Dora

Similar Messages

  • Validation for profit center and plant in material master

    Hi,
    I have a requirement where in when a material is created for a plant, only a designated profit  center should be able to enter in the "Costing 1" view.
    For eg
    Plant            Profit center.
    2000            200000
    2100            210000
    2200            220000
    Please let me know how this can be done.
    Best Regards,
    Arahant

    tell us the solution also
    sap mm

  • Difference between profit center in OKB9 and material master

    Hello,
    I have a small doubt over here in the profit center point of view.
    We have created profit center 1200 and assigned the same in material master. Now while doing PO system threws error message like "Account 5005115 requires an assignment to a CO object Message no. KI235". To eliminate this error i have assigned Cost element(1001125) and Profit center(1200) in TC: OKB9, now system is able to post everything fine.
    Here the issue " If i can change profit center in the material master say ex: 1201, system picks from the material master only then why assigned in the OKB9? while doing MIRO system updated in the 1201 profit center".
    Could anybody update me why we need to assigned profit center in OKB9 and Material Master?
    Thanks
    anifi

    Hi,
    This is about co.code level field status and Transaction level field status. In OKB9 transaction profit center is maintained and it is getting picked up.
    As per SAP if any transaction level field status is maintained it will overwrite the co.code level field status.
    So, here when you are giving the input of Profit center in the material master itself it is overwritting the co. code level field of profit center. If nothing is given in material master, then by default OKB9 level profit center will be picked up.
    Thanks,
    Prithwiraj.

  • WM Material Staging  for Production Order

    Hi,
    In the process order txn Cor3, Go to > List > WM pick list>  the initial screen is  Display WM Material Staging  for Production Order. In the All parts tab, could you please help me on how to be able to populate the fields in the  BSI, Category and Storage Bin. Your help is greatly appreciated.
    Thanks

    Dear Ellen,
    If you set the cursor on 'BSI' field and push F1 you'll get an explanation about the meaning of each category.
    '"<i>1" pick list item
    This materials are picked according to the required quantity specified in the production order.
    '2': Crate or kanban parts
    These materials are always removed from the warehouse in full cases. These can be ordered, for example, as soon as a case of needed parts is emptied in production.
    '3': Release order parts
    Release order parts are scheduled individually and the quantities are supplied manually to replenishment storage bins based on the requirements of production orders and the stock levels in the scheduled production supply areas.
    "0" not relevant to WM-PP
    These materials are not relevant for WM production supply and cannot be requested using the WM system.</i>'
    For instance:
    You can set raw materials / SFG as pick parts if warehouse workers have to collect those parts from high racks (from different places) and they have to provide an exact qty for the PrdOrd.
    We use '4' (manual staging) for huge alu rolls that are near the machine and WH workers have nothing to do with it - the operators, who deal with the machine, have to put the new rolls on it.
    When we issue the PrdOrd the requirements of this material won't appear in LB10 since WH has nothing to do with them.
    'Storage bin' filed will contain a value automatically, if your settings are proper.
    E.g. you have to define the default 'stock removal' & 'stock placement' storage type on WM view of material master.
    Additionally you have to define control cycles for materials you use for your production. (LPK1)
    The control cycle says from which storage type & bin you want to consume the components.
    BR
    Csaba

  • Material Staging for Production Order

    Hi,
    I am doing Material Staging against production Order using T Code MF60. We don't have WM setup in the enterprise structure so the Staging is done via IM Mvmt. Type 311. My problem is that the material document created using MF60 does not have a reference of Production order or vise versa. Can anyone suggest a configuration or a user exit that can be used to make a reference link between the Production Order and the Staging Document?
    Thanks
    Arvind

    Hi!,
    Though whatever you are asking for is not possible with standard SAP but you can try this work around solution:
    Click on replenishment element.
    Now in MF60  Menu > View > Table column > Select " All Column" (after clicking ).
    Now system will show some open fields (like Goods recipient, unloading point etc) on replen. element.
    There in one of the field like unloading point (which you are not using elsewhere) you can enter the production order number so when you stage the same that order number will be saved in that document and you can get it from RESB table against the reservation number.
    To automate the same you can use some enhancement with above logic.
    I hope this helps in resolving your problem.
    regards,
    Uday
    Edited by: Uday Parchure on Jul 29, 2009 12:50 PM

  • Plant specific fields in the material master for product move

    Hi, SAP gurus,
    My scenario is we are moving a existing product in US plant to Brazil plant. What are the fields in the material master that are specific to a plant that will change. For ex MRP controller will change from plant to plant. Like that can anybody please provide me a list of fields that i need to be looking at?
    Thank you
    Anusha

    Hi Anusha,
    First of all, list down all your materials those you want to extend to new plant.
    a) Secondly, pay attention to those fields you will find "filled" in those materials at plant level.
    b) MARC comes handy for you to analyse which fields are at plant level.
    Intersection of fields with values between a and b are the ones you need to work out.
    Good luck,
    Regards

  • How to include field Internal order in the material master for SD orders

    Hello,
    I would like to know how I can bring the field "Internal Order" to the material master, so I can create materials with assignments to internal orders.
    We want to create Sales Orders where when we enter on order item with a material, the internal order is derived automatically from the material master.
    Thank you in advance!
    Jose Eximeno

    Hello,
    I am not familiar with the field "product attributes" in relation with entering the field "internal order"...
    Could you be a little more specific on how product attributes can be used to enter the internal order number in the material master?
    Best regards,
    Jose

  • Fields to be activated from Material Master for product costing.

    hi guys.
    our MM person is creating BDC for uploading master data.
    we have to do product costing in second phase.
    what fileds we have to activate now, from accouting & costing view???
    is it  necessory to activate LIFO/FIFO relevancy indicator for product costing??
    will it affect to inventory valuation directly???
    can we actiavte the fileds afterwords???

    Dear Mr.Taj,
    Where's the quantity structure field in Accounting 2 view?
    Do u mean which's in Costing 1 view?
    <b>Dear MR.Patil,before doing cost roll up & release all the fields should be having proper values (inputs).</b>
    Later on also u can activate.I mean during material creation itself if u ensure these checks,this will help you in taking the cost rollup smoothly.
    Or else you have to correct those errors at the time of costing.
    If useful reward points.
    Regards
    Mangal
    Message was edited by:
            Mangalraj

  • Best practice - material staging for production order

    Hi Experts,
    could any of You pls, support me with some hints of best practice how to handle material staging WM-PP interface in a certain case?
    Up till now we had a system, where production had no separate location in IM, but one location existed including raw material wh and production. In the same time in WM we had separate storage types for production and raw materials u2013 hence we did material staging transferring goods only inside one IM location between different WM storage types. The material staging should be done based on separate prd. orders.
    Now this need to be changed and separate location need to be handled in IM for production u2013 which means the staging should be done between different IM locations and WM administration also need to be handled.
    Up till now we used LP10 for staging, then LB13 for TO creation etc. We can keep going like that, but if do so, there is another step required in IM u2013 movement 311, where material numbers and qty need to be added manually to finish the whole procedure. I would like to avoid this u2013 which makes the administrational procedure quite long.
    I have been checking the following possibilities:
    1.     Set released order parts-staging at control cycle and use MF60 for staging u2013 but I can not select requirements based on pro ordders here (only able to find demand if component including into selection)
    2.     Two step transfer 313/315 u2013 but this not a supported procedure u2013 313 TI /TO / 315
    3.     Try to find solution how to create 311 movement based on TO or based on WM stock at certain storage type / dynamic bin.
    I have failed.
    So, could any of You pls, support me with some useful ideas, how to handle material staging where 311 included and definetly the last step of procedure, but administrator does not need to enter items manually one by one in MIGO.
    All answers will be appreciated

    Hi,
    Storage location control should be able to take care of your problem.
    If you want to stage the material to a different IM location then the WM location then make the following settings
    If location xxxx is your WM location and location yyyy is your Production location.
    You have defined Production storage type ZZZ for production storage location YYYY and have maintained the supply area for the same
    In WM configuration - For interfaces - IM interface-Control of Assignment "Plant / Stor.Loc. - Whse Number"
    Assign location XXXX as the Standard Location. Maintain entry donot copy sloc in TR for location YYYY
    In WM configuration - For interfaces - IM interface-  Storage Location control for WH
    This entry ensures that there will be a WM tarnsfer Posting between your WM and Production storage Location automatically when you confirm your TO. You can have this done via a btach job also if you want cumulative posting. (schedule job RLLQ0100)

  • Material issued for Production order

    Hello Friends,
    Is there a report in SAP that gives the quantity of material with drawn for  a production order.
    Eg: When run by a part number ...report should give the production order number and the quantity withdrawn.
    COOIS when ran by component number gives the lit of all components in the production order.

    Hi,
    As for standard transactions:
    You can use report COOIS that was mentioned by you - within the report you can filter the part number. MB51 is also goods for reporting, but you have to filter for PrdOrd no. within the report...
    Or you can customize those transactions putting the necessary selection fields or write an own query.
    Regards,
    Csaba

  • PP-MM issue in material reservation for production order.

    Dear Friend,
    I am in confusion that this is PP issue or MM issue.
    If any issue if any one knows please provide me solution.
    I run report -MO24- missing part info system.
    System givening me material and requirement date and requirement quantity.
    If stock is availble then it is comming in commited quantity. Thats is agreed.
    But My problem is that that committed quantity is repeated daily though stock is not available in system. Why this is happening???
    Regards,
    Mahesh.

    First, there no such transaction as MO24!
    And secod, please try to clarify your question; what do you mean that committed quantity is there every day without stock?

  • Material staging for production orders- NO TR

    Dear Experts,
    I have created a Planned Order for which Component materials are to be supllied.
    I am not able to see the Transfer request for the same.
    Kindly help.
    Please also let me know if there are any configurations for this?
    regards,
    Shetty

    Any suggestions pls?

  • Relationship b/w profit center Vs plants

    Dear FI-CO guru's
    Can u explain what type of relation ship can  we maintain plant to profit center , is there any assignment to plant vs profit center?
    and explain both aspect of view relationship between plant vs profit center
    thank in advance
    Regards
    A.Guru prasad

    Hi,
    as Sreekanth explains it is not a 1:1 plant => profit-center assignment but a plant => plant view in material master (eg Costing 1) => profit center assignment which makes a big difference.
    Example: plant 1234, profit center 1234_1, 1234_2, in material master plant view plant 1234: one material A is assigned to profit-center 1234_1, another material "B" is assigned to profit-center 1234_2.
    Thus there is no T-Code that shows such a relation of plant / profit center.
    What you can do is to report table MARC (via SE16, SQVI, SQ01) and search for all the MARC-WERKS / MARC-PRCTR combinations that are maintained in your company.
    best regards, Christian

  • Cost center for Production Order

    Hi all,
         We are now not able to get a report of Material consumption cost, Cost center wise. It is Because cost center is not linked to Production order or not linked to material issued to production order. Can we get the cost of material cosumption for  production order cost center wise. Please give us a solution.
    With Regards,
    R.Mahendiran.

    Hi,
         Prod order is linked with controlling, for the direct costs like material cost linked with accounting view, costing view and secondary costs are linked with costing tab in work center and inturn workcenter is assigned to cost center, and for the prod order controlling part you will be assigned to the costing variant in transaction OPL8, if you remove this you can't get any reports.
    To understand the difference
    201 - Goods issue against cost center. Means you create reservation through MB21 and do posting of cost directly at cost center.
    261 - Goods issue to Production order. Means you create a reservation through Production order  and do posting of cost to Production order. When cost settlement of production order is done cost from production order will get transfered to cost center mentioned in settlement rule of production order.
    Hope this clarifies your doubt.

  • Re:assign profit center to a order type

    hi gurus,
    good morning to everybody,
    i have a question i have 1000 materials in my organization using by 5 company codes in that few material i need to assign profit center so i went to mm change and assigned the profit center for sales:general/plant and plant data/stor.2, if i want to assign profit center to order type how can i assign, if i cannot assign in order type i need to assign profit center in mm change for 500 materials, so if i change manually in mm change for 500 materials is it going to effect for the other company code when they post the transactions please give me your opinions.
    thanks in advance and points will be assign for useful answers.
    kumar.

    Dear Kumar
    You cannot assign the Profit Center to Sale Order type.  Whatever you maintain in Material Master, that will flow automatically in sale order as and when you create. 
    If you want to change the profit center in material master in bulk, you can do so via MASS.  In fact for sale order also, you can achieve this via MASS but no partial delivery should have been made against that sale order.  In case, you have already made partial delivery, then the field would become grey and you cannot change the same.
    thanks
    G. Lakshmipathi

Maybe you are looking for