Assignment transportation zone at the same shipping point

Hi Experts
How can I affect several transport zones at the same shipping point (OVL7)?
Thanks
Hachim

Hi Hachim,
The transportation zone has to be unique: It is the starting point assigned to the shipping point.
Why do you believe you need several transportation zones?
Regards,
Franck

Similar Messages

2LIS_12_VCITM populates the same Shipping Point and Receiving Plant

Hi Gurus,
We are using 2LIS_12_VCITM extractor which answers all delivery-related requirements. However when I checked the data in RSA3, Shipping Point and Receiving Plant are the same. So I checked some sample deliveries in table LIKP and it shows the correct shipping point and receiving plant (which are different to each other). I checked VL03N and table LIKP is giving the correct shipping points and receiving plants. Receiving Plant or LIKP-WERKS and Shipping Point or LIKP-VSTEL. My question is how this happened? Consequently, when I initialized in BW, shipping point and receiving plants are the same which should not be.
Thanks for all the help.

The data for the 2LIS_12_VCITM is not just sourced by LIKP (Delivery Header), but by LIPS (Delivery Item) too.
Plant, in this extractor, is sourced by LIPS-WERKS instead of LIKP-WERKS. The receiving plant is LIPS-UMWRK. If you require this data, you will have to enhance the structure and create the User Exit code in tcode CMOD to extract that particular data.

Transportation Zone in the ship to party changed after delivery

Dear Guru,
Earlier when the user was creating sales order and the delivey the transportation zone for the ship to party was france, now before billing he has changed the transportation zone to netherlands.
When he created billing, tax MWST was not getting triggered. i asked him to create pricing condition for Export tax, but it is not heling us.
If he changes the transportation zone for the ship to party and try to crete billing will it help to trigger MWST.
Reg,
NZ

Hi Nayaz,
You should maintain create condition records for MWST from vk11 in access sequence like (departure country/destination country, domestic, and export taxes). additionally, maintain your route determination regarding of your requirement and customer and material master billing tax tab should be maintained according to this configurations.
I hope these will solve your problem.
Regrds,

I need to have two time zones on the same iCal appointment

I work accross four time zones, two of which do not observe Daylight Saving Time (DST). This means that when I'm booking my flights on iCal, it would be usefull to have two time zones in the same iCal appointment (Outlook, for instance, allows this). What I currently do is to choose one of the time zones as the iCal appointment and then I "translate" the other time to the one I'm using on iCal.
This is quite a challenge, though:
if I'm taking a flight from Luanda (WAT = GMT+1, no DST) to London (GMT with DST) I would like to book it on iCal exactly like it shows on the ticket , 21:00 (WAT) to 06:00 (GMT).
Using the "translated approach", from May to October, this means 21:00 (GMT) to 06:00 (GMT).
Using the same approach, from November to April it means from 20:00 (GMT) to 06:00 (GMT).
If I include Jo'burg (CAT = GMT+2, no DST) and Frankfurt (GMT+1 with DST), booking flights in your calendar becomes quite a challenge!
Does anyone know if this feature is planned for any future versions of iCal?

Hi,
This is not possible in iCal. The nearest thing would be to create two events, one for take off and one for landing.
Also, this is a user to user forum. By posting here you are not guaranteed someone from Apple will read it. If you'd like Apple to know about your suggestion I reccommend you send them feedback.
Best wishes
John M

Can we assign two values to the same parameter? If yes how? For details ple

Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
I want to do this to print two documents(values) with a single command (parameter)
Anybody please help quickly,
Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
JAVA PROGRAM:
<param name="QUERY" value="REPORT_TEST1"/>
function PrintReport(typePaper) {
document.title ='Report';
if (typePaper == "0")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
if (typePaper == "1")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
var openCMD='<SAP_BW_URL>';
openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
openCMD += CurrentReportName;
openWindow(openCMD,'MainTitleNow',800,600);
The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
Please help.
THANX A LOT,
SRINI

Hi,
Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
In the function get the parameter value and seperate the values using the same delimiter.
<param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
Regards,
Uma

Can we assign two values to the same parameter? If yes how?

Can we assign two values to the same parameter? If yes how? For details please go through the following SAP related program.
Here I need to print 2 queries using the same parameter "QUERY" the value assigned to this parameter(query) is REPORT_TEST1. I want to assign one more value to this Parameter. Is is possible? This question may sound stupid if it is not possible please kindly reply.
I want to do this to print two documents(values) with a single command (parameter)
Anybody please help quickly,
Now, I have 2 tables from different queries. I have a print (HTML written) option in my WEB Template
JAVA PROGRAM:
<param name="QUERY" value="REPORT_TEST1"/>
function PrintReport(typePaper) {
document.title ='Report';
if (typePaper == "0")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('39') + '&qtitle=' + escape(document.title);};
if (typePaper == "1")
{var CurrentReportName = '&?mp=U&ptot=1&rtot=0&psize=' + escape(typePaper) + '&fsize=' + escape('52') + '&qtitle=' + escape(document.title);};
CurrentReportName += '&ASOFDATE=' + escape(AsOfLabel.innerText);
var openCMD='<SAP_BW_URL>';
openCMD += '&DATA_PROVIDER=REPORT_TEST1&TEMPLATE_ID=DPW_PRINT_PAGE&CMD=RELEASE_DATA_PROVIDER';
openCMD += CurrentReportName;
openWindow(openCMD,'MainTitleNow',800,600);
The data provider here is REPORT_TEST1. Now it only prints the corresponding data for the data proviedr 1 i.e., REPORT_TEST1. I have a second table whose data comes from the data provider 2 when i use this HTML to print I want the second table contents from the data provider 2 (REPORT_TEST2)also to be printed simlutaneously.
Please help.
THANX A LOT,
SRINI

Hi,
Try assigning two values seperated by a delimiter ( say '|') to the same parameter.
In the function get the parameter value and seperate the values using the same delimiter.
<param name="QUERY" value="REPORT_TEST1|REPORT_TEST2"/>
Regards,
Uma

When I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router

when I connect my apple tv to my access point upstair and connect my ipad to the same access point i cant see my apple tv when i open up the airplay menu on my ipad. but i can see the apple tv in the living room downstair which connect to the main router.
Below is some info i get about ports.
I tried to set DMZ on my main router to have full access to ported to access point upstair which is in the ip of 192.168.1.2 and the main router in the living room is the gateway router with the 192.168.1.1 ip.
I still cant see apple tv after i try the DMZ method.
any suggestion ?
These network ports are used by Apple TV for communications on your network.
TCP port 123 is used to communicate with a network time server.
TCP port 3689 is used to communicate with iTunes while using the iTunes Library Sharing feature.
UDP port 5353 is used by Apple TV for automatically finding computers with iTunes on your network using Bonjour.
TCP port 80 is used for communicating with podcast servers.
TCP port 80 and 443 are used for basic and secure communications with the iTunes Store via the Internet.
TCP port 53 is used for regular DNS.
These are well-known ports used by Apple products, like iTunes. If you can use all the features of iTunes, these ports are likely already open on your firewall or NAT router. Note: These ports may also used by other services such as YouTube and Flickr.

When the Apple TV is paired with a remote, it means only that remote can control it, when it's not paired any remote can control it. You will need a remote for each of your devices.

How to compare the transports requests in the same system

HI ,
Is there any option to compare transport requests in the same system whether both contain the same objects or not.

Ambarish, you can perform check in two ways.
-you can go to /usr/sap/trans compare the data files and cofiles andcheck the physical size whether it is same or not.
-you open the TR in SE01 tcode, select the sub TR and expand it it will show you the list of objects/programs included in that TR.
Hope it addresses your query.
Regards, Amber S | ITL

I cannot print to a p1102w if i am on a machine connected to the same access point as the printer..

I have two p1102w printers set up in a school, any time I try to print it will only work if the laptop i'm using is connected to a different wireless access point than the printer. This happens anywhere in the school, has anyone ever encountered something like this before?
The laotops are running xp sp3 professional by the way.
Thanks in advance for your thoughts and ideas.
joray75

First thing to do is check your routing rules and tables in the network to make sure the type of communication you're wanting (printing via wireless on the same access point) is allowed. I'm betting something is off in those that's preventing communication.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

When i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

when i sync my ipad and imac on ical the times are different yet the time zones are the same, any ideas why?

Under the summary tab in iTunes make sure you have Automatically Back Up This computer. If you have iCloud selected it won't back up when syncing.

Single Delivery Document, Different Customers, but same Shipping point?

Dear SAP Gurus
I would like to know if I can create a single delivery for 2 or more sales order. Shipping point is the same in all the orders?
If so how can I achieve this?
Ali

Hi,
You can achieve this in the transaction code VL10A
Provided all the documents should have same
INCO TERMS
DELIVERY DATE
SHIP TO PARTY
PAYMENT TERMS
SHIPPING POINT
Please check and revert back
regards,
santosh

String objects with the same string pointing to the same place but?

Hi,
Here is a simple sample
String str1 = "a";
String str2 = "a";I understand that in Java str1 and str2 pointing to the same place in memory and Java compiler wouldn't save the string "a" in two different places in memory. Am I right?
If so, if the value of str1 changes to something else as following:
String str1 = "a";
String str2 = "a";
str1 = "b";why str2 which has been pointing to the same place as str1 before is still containing ?a? and not ?b????
Thanks!

Maria1990 wrote:
Hi,
Here is a simple sample
String str1 = "a";
String str2 = "a";I understand that in Java str1 and str2 pointing to the same place in memory and Java compiler wouldn't save the string "a" in two different places in memory. Am I right?Correct.
Maria1990 wrote:
If so, if the value of str1 changes to something else as following:
String str1 = "a";
String str2 = "a";
str1 = "b";why str2 which has been pointing to the same place as str1 before is still containing ?a? and not ?b????Because str2 is pointing to the same "a", but it is not pointing to str1.
This is what happens:
String str1 = "a";
/*                 +---+
         str1 ---->| a |
                   +---+
String str2 = "a";
/*                 +---+
         str1 --+->| a |
                | +---+
                |
         str2 --+
NOT:
                   +---+
     +-> str1 ---->| a |
     |             +---+
     |
     +- str2
str1 = "b";
                   +---+
             +---->| b |
             |     +---+
             |
             |     +---+
        str1-+ +->| a |
                | +---+
                |
         str2 --+
*/

How do I sync my icloud calendar between iPhone 5 and macbook pro without a 1 hour difference? I've made sure that the time zones are the same on all devices and it's still doing it.

I cannot get my iphone 5 and macbook pro to display the same time on my calendar. There is a one hour difference between them and it is driving me crazy!! Please help!!!

Did you also confirm that the time zone was set correctly on icloud.com (click on your name, check Time Zone)?

Different time zones in the same calendar subscription

Dear kind helpers,
To state my problem as clear as possible, I need to be a bit long. Sorry for that.
I registered to a calendar displaying the rugby schedule for the VI nations tournament:
-> http://www.rbs6nations.com/tools/calendars/sixnations-fixtures-6n-all.ics
from the official web site:
-> http://www.rbs6nations.com/en/matchcentre/downloadable_fixture_list.php
The only thing you need to know about this tournament is that it involves 6 teams (hence the name):
- 2 on the continent, then at GMT+1 (France and Italy),
- 4 on the British Isles (Englands, Walles, Scotland and Ireland), then at GMT+0
I think all of these nations have the same summer / winter shifts.
I'm on the continent, Central European Time for the time zone support feature on iCal (OS 10.9.1).
I guess it's GMT+1 plus winter shift at the moment.
I notice the same following problem on my iPod (iOs 5.1.1), sync through iCloud
Here the problem : it seems all the games are in local times !
For instance, a game in the Islands (Scotland, England, ...) appears at 5pm whereas I would like it to appear at 6pm (so the time is correctly displayed for British Isles, not for the continent) / a game on the continent (France or Italy) will appear at 5pm and I'm fine because it's right the correct time in my time zone. I've no idea how a game which takes place on the continent appears in the British Isles :-(
So a few questions :
- am I clear about the problem ?
- is it a problem from iCal or from the subscription itself ?
- in case it's iCal, is there a way to fix the trouble ?
PS : I experienced the same problem with an other subscription a few years ago ; it was also for a european championship schedule across different time zones displayed in the same calendar. This one was discontinued.
Thanks in advance.

Hi,
This is an issue with the subscription itself. The times for the events are set in 'floating' time and whatever time zone you use it iCal will show the event as being at that time local time (which obviously won't be right unless you are in the correct time zone).
I could post a more technical explanation if you like.
Best wishes
John M

Synchronize input and output tasks to start at the same sample point [C++ NI_DAQmx Base]

I'm trying to initiate the analog input and output streams to start reliably at the same sample. I've tried triggering the output from the start of the input using the following code [NI-DAQmx Base 2.1 under Mac OS X with an M-Series multifunction board]. It compiles and runs, but gives an error message at the call to "DAQmxBaseCfgDigEdgeStartTrig". Any suggestions about synchronized I/O on this platform?
#include "NIDAQmxBase.h"
#include
#include
#include
#define DAQmxErrorCheck( functionCall ) { if ( DAQmxFailed( error=( functionCall ) ) ) { goto Error; } }
int main( int argc, char *argv[] )
// Task parameters
int32 error = 0;
TaskHandle inputTaskHandle = 0;
TaskHandle outputTaskHandle = 0;
char errorString[ 2048 ] = {'\0'};
int32 i;
time_t startTime;
// input channel parameters
char inputChannelList[] = "Dev1/ai0, Dev1/ai1";
float64 inputVoltageRangeMinimum = -10.0;
float64 inputVoltageRangeMaximum = 10.0;
// output channel parameters
char outputChannelList[] = "Dev1/ao0, Dev1/ao1";
char outputTrigger[] = "Dev1/ai/StartTrigger";
float64 outputVoltageRangeMinimum = -10.0;
float64 outputVoltageRangeMaximum = 10.0;
// Timing parameters
char clockSource[] = "OnboardClock";
uInt64 samplesPerChannel = 100000;
float64 sampleRate = 10000.0;
// Input data parameters
static const uInt32 inputBufferSize = 100;
int16 inputData[ inputBufferSize * 2 ];
int32 pointsToRead = inputBufferSize;
int32 pointsRead;
float64 timeout = 10.0;
int32 totalRead = 0;
// Output data parameters
static const uInt32 outputBufferSize = 1000;
float64 outputData[ outputBufferSize * 2 ];
int32 pointsToWrite = outputBufferSize;
int32 pointsWritten;
for( int i = 0; i < outputBufferSize; i++ )
outputData[ 2 * i ] = 9.95 * sin( 2.0 * 3.14159 * i / outputBufferSize );
outputData[ 2 * i + 1 ] = -9.95 * sin( 2.0 * 3.14159 * i / outputBufferSize );
// ------------------- configure input task -----------------------
DAQmxErrorCheck ( DAQmxBaseCreateTask( "", &inputTaskHandle ) );
printf( "Created input task\n" );
DAQmxErrorCheck ( DAQmxBaseCreateAIVoltageChan( inputTaskHandle, inputChannelList, "", DAQmx_Val_RSE, inputVoltageRangeMinimum, inputVoltageRangeMaximum, DAQmx_Val_Volts, NULL ) );
printf( "Created AI Voltage Chan\n" );
DAQmxErrorCheck ( DAQmxBaseCfgSampClkTiming( inputTaskHandle, clockSource, sampleRate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, samplesPerChannel ) );
printf( "Set sample rate\n" );
// ------------------- configure output task -----------------------
DAQmxErrorCheck ( DAQmxBaseCreateTask( "", &outputTaskHandle ) );
printf( "Created output task\n" );
DAQmxErrorCheck ( DAQmxBaseCreateAOVoltageChan( outputTaskHandle, outputChannelList, "", outputVoltageRangeMinimum, outputVoltageRangeMaximum, DAQmx_Val_Volts, NULL ) );
printf( "Created AO Voltage Chan OK\n" );
DAQmxErrorCheck ( DAQmxBaseCfgSampClkTiming( outputTaskHandle, clockSource, sampleRate, DAQmx_Val_Rising, DAQmx_Val_ContSamps, samplesPerChannel ) );
printf( "Set sample rate\n" );
// trigger output when input starts
DAQmxErrorCheck ( DAQmxBaseCfgDigEdgeStartTrig( outputTaskHandle, outputTrigger, DAQmx_Val_Rising ) );
printf( "Set output trigger\n" );
// ------------------- configuration -----------------------
// write output signal
DAQmxErrorCheck ( DAQmxBaseWriteAnalogF64( outputTaskHandle, pointsToWrite, 0, timeout, DAQmx_Val_GroupByScanNumber, outputData, &pointsWritten, NULL ) );
printf( "Write output signal\n" );
// set up input buffer
DAQmxErrorCheck ( DAQmxBaseCfgInputBuffer( inputTaskHandle, 200000 ) ); // use a 100,000 sample DMA buffer
// initiate acquisition - must start output task first
DAQmxErrorCheck ( DAQmxBaseStartTask( outputTaskHandle ) );
DAQmxErrorCheck ( DAQmxBaseStartTask( inputTaskHandle ) );
// The loop will quit after 10 seconds
Dr John Clements
Lead Programmer
AxoGraph Scientific

Hi Michael,
First of all, thanks very much for taking the time to investigate this problem! Much appreciated.
You asked for "an actual error code you got and any description that is given". The full output from the program that I posted earlier in this thread is appended to the end of this message. In summary, following the call to...
DAQmxErrorCheck ( DAQmxBaseCfgDigEdgeStartTrig( outputTaskHandle, outputTrigger, DAQmx_Val_Rising ) );
... with ...
char outputTrigger[] = "Dev1/ai/StartTrigger";
...the error message is ...
DAQmxBase Error: Specified route cannot be satisfied, because the hardware does not support it.
You asked "specifically which M series device you are using"? It is the PCIe 6251 (with BNC 2111 connector block). I'm testing and developing on an Intel Mac Pro (dual boot OS X and Windows XP).
You asked for "the location you pulled the code from". Here it is...
http://zone.ni.com/devzone/cda/epd/p/id/879
...specifically from the file "Multi-Function-Synch AI-AO_Fn.c".
I adapted the NI-DAQmx calls to their NI-DAQmx Base equivalents.
Finally, you asked "Is the trigger necessary, or do you just need to know that the measurements are running on the same clock?". I believe that some kind of sychronized trigger is necessary in my situation (correct me if I'm wrong). Timing is crucial. Say I initiate an analog output stream that delivers a voltage command step 5 ms from the onset. I need to record the response (analog input stream) so that its onset is accurately aligned (synchronized) at 5 ms. A typical recording situation would stimulate and record a short data 'sweep', then wait for the (biological) system to recover, then stimulate and record another short sweep, and repeat. I need all the recorded sweeps to align accurately so that they can be averaged and analyzed conveniently.
I definitely do not want my customers to rely on an expensive external TTL pulse generator to initiate and synchronize each 'sweep'. That would effectively eliminate the cost advantage of an NI board, as well as adding unnecessary complexity in setup and use. It would be a show-stopper for me.
It seems perverse, but would it be possible to use a digital output channel connected directly to a digital input chanel to trigger the input and output streams?
Regards,
John.
Full output from test program. Compiled with gcc 4 under OS X...
[Session started at 2007-05-23 14:17:01 +1000.]
LoadRuntime: MainBundle
CFBundle 0x303cc0 (executable, loaded)
_CompatibleWithLabVIEWVersion: linkedAgainst: 08208002
_CompatibleWithLabVIEWVersion: result= false, mgErr= 1, theActualVersion= 00000000
_CompatibleWithLabVIEWVersion: linkedAgainst: deadbeef
_CompatibleWithLabVIEWVersion: Reseting Linked Against
_CompatibleWithLabVIEWVersion: linkedAgainst: 08208002
_CompatibleWithLabVIEWVersion: result= true, mgErr= 0, theActualVersion= 00000000
_CompatibleWithLabVIEWVersion: linkedAgainst: 08208002
_CompatibleWithLabVIEWVersion: result= true, mgErr= 0, theActualVersion= 00000000
com.ni.LabVIEW.dll.nidaqmxbaselv
CFBundle 0x313760 (framework, loaded)
{type = 15, string = file://localhost/Library/Frameworks/nidaqmxbaselv.framework/, base = (null)}
Amethyst:Library:Frameworks:nidaqmxbaselv.framework
2007-05-23 14:17:02.248 test-ni[4445] CFLog (21): Error loading /Library/Frameworks/LabVIEW 8.2 Runtime.framework/resource/nitaglv.framework/nitaglv: error code 4, error number 0 (no suitable image found. Did find:
/Library/Frameworks/LabVIEW 8.2 Runtime.framework/resource/nitaglv.framework/nitaglv: mach-o, but wrong architecture)
CFBundle 0x1751fdc0 (framework, not loaded)
Created input task
Created AI Voltage Chan
Set sample rate
Created output task
Created AO Voltage Chan OK
Set sample rate
DAQmxBase Error: Specified route cannot be satisfied, because the hardware does not support it.
test-ni has exited with status 0.
Dr John Clements
Lead Programmer
AxoGraph Scientific

Assignment transportation zone at the same shipping point

Similar Messages

Maybe you are looking for