Assinging new Organization in Multi-Org.

We have a multi-org setup. We need two different set of Books - for the first SOB we are using an Organization (Set Up Business Group).For the second SOB, we are not able to define another Organization through HRMS.
The problem is while defining Organization (in Organization Classification viz.,Operating Unit) we are not able to get the list of values (LOV) for Legal entity.
null

We have followed all these steps for defining the organization. The organization for the first SOB has been defined successfully. But while trying to define a organization for the second SOB,in defining 'Operating Unit'(Organization Classification)and going to 'Others' to give the Legal Entity, we are not getting the pick for the LOV.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by pwcblr:
Monesh D Mohan
this is pretty cool... go to organizations screen in setup... then insert a new row in organization classification section called gre/legal entity then one more called hr organization and one more called inventory organization and lastly one called operating unit.. for each of these click on others and give all relevant context values.... this is the funda... thanx and hope this helps
<HR></BLOCKQUOTE>
null

Similar Messages

  • Converting to Multi-Org in the middle of upgrade process from 11.5.10.2 to

    Hi all,
    We are in the process of Upgrade from EBS 11.5.10.2 to R12.1.1 (FA and GL modules only)
    We have 10 Set of books
    we are NOT multi-org enabled
    we understand that we have to convert to Multi-Org for R12
    Our problem is :
    We did not define any Operating units till now:
    1- After some analysis, we decided to create one legal entity and one operating unit FOR EACH set of book
    2- So we will have 10 Set of books , 10 Legal entities and 10 Operating units
    3- We should run Adadmin utility option "convert to Multiple Organization architecture"
    In the document "Upgrade Guide - Release 11i to 12.1.1"
    "Before running this step, you must define an operating unit and set the site–level AOL profile option MO: Operating Unit to use your new operating unit. This profile option tells adadmin what operating unit it should use when converting your existing data. If you define additional operating units, the seed data will be replicated for all operating units"
    4- Which Operating unit of the 10 defined operating unites should be set in the site–level AOL profile option MO: Operating Unit ??
    And what about the remaining 9 Operating units ? What about running the Adadmin utility option should we run it one time only ?
    Thanks in advance
    Mohamed F.

    Hi Mohammed,
    The requirement is to define at least one operating unit and set the profile option, "MO: Operating Unit" at Site level, to that Operating Unit's value
    If you define more than one Operating Unit, the replicate seed data process is run for all Operating Units.
    So you can set it to any operating unit and run adadmin.
    Please refer to
    FAQ - Multiple Organizations Architechure (Multi-Org) [ID 165042.1]
    Thanks

  • Converting to Multi-Org in 11i?

    In order to comply with Oracle's recent announcement that a Multi-Org setup will be required for all patches after 9/30/2002 (Metalink Doc ID 202127.1), my client is about to start the effort of converting to multi-org. Each of the client's database instances is...*gulp*...about 500GB.
    Has anybody completed the conversion process in 11i using the multi-org conversion option in ADADMIN? If so, what was the approximate size of the database and how long did the program run?
    Any feedback will be greatly appreciated!
    FMT

    Hi Mohammed,
    The requirement is to define at least one operating unit and set the profile option, "MO: Operating Unit" at Site level, to that Operating Unit's value
    If you define more than one Operating Unit, the replicate seed data process is run for all Operating Units.
    So you can set it to any operating unit and run adadmin.
    Please refer to
    FAQ - Multiple Organizations Architechure (Multi-Org) [ID 165042.1]
    Thanks

  • Converting to Multi org

    Hi All,
    We have our production running on Oracle Applications 11.5.10.2 with 10g database, HRMS,payroll modules. We are planning for R12 upgrade and as a prerequisite we are analyzing about the multi org conversion. We are the medium size utility company operates on single location and time zone.
    1. From the metalink document we understood that converting to multi org is mandatory for all customers(including hrms) planning to R12.
    2. We would like to know the impact of converting to multi org on HRMS
    3. The document 259546.1 says that there are scripts to create the lightweight operating unit and then running adadmin option would change the environment to multi org enables.
    4. In our environment already hr organizations are defined and running for several years. As per the above statement do we need to run the script to create a new lightweight operating unit and run adadmin?. If so where can i find the script for creating the lightweight OU. We found the patch 5965493. But that patch is failed in our environment when executing funmodefou.sql
    Can anyone please point us to a clear set of documents which explains the impact on HRMS and detail steps to convert to multi org.
    I appreciate your help

    1.select * from HR_ORGANIZATION_INFORMATION where ORG_INFORMATION1 like 'Operating Unit Information'
    2.select * from HR_ORGANIZATION_INFORMATION where ORG_INFORMATION_CONTEXT like 'Operating Unit Information'
    3. Select count(*) from hr_operating_units
    count
    0
    4. SELECT O.BUSINESS_GROUP_ID , O.ORGANIZATION_ID , OTL.NAME , O.DATE_FROM , O.DATE_TO , O3.ORG_INFORMATION2 , O3.ORG_INFORMATION3 FROM HR_ALL_ORGANIZATION_UNITS O, HR_ALL_ORGANIZATION_UNITS_TL OTL, HR_ORGANIZATION_INFORMATION O2, HR_ORGANIZATION_INFORMATION O3 WHERE O.ORGANIZATION_ID = O2.ORGANIZATION_ID AND O.ORGANIZATION_ID = O3.ORGANIZATION_ID AND O2.ORG_INFORMATION_CONTEXT||'' = 'CLASS' AND O3.ORG_INFORMATION_CONTEXT = 'Operating Unit Information' AND O2.ORG_INFORMATION1 = 'OPERATING_UNIT' AND O2.ORG_INFORMATION2 = 'Y' AND O.ORGANIZATION_ID = OTL.ORGANIZATION_ID AND OTL.LANGUAGE = userenv('LANG')
    returns 0 records

  • Error when creating a new Organization in Deployment Manager

    I am trying to create a new Organization to an existing CRM environment and I keep getting the error below. The user deploying the new Organization has full control on all the security groups and Admin rights on the servers that Host SQL and CRM
    application. The CRM environment is 2011 on Premise that has been setup for IFD.
    We currently have 2 other organizations that are already in the environment, so the new org would be a third. I am more than glad to provide any firther information that I have to anyone that can help us resolve this issue. I also have a log file that I
    saved after the failed creation attempt. I can provide the contents of the log file to anyoen who can help. Its too long to add here.
    The section of the log file that shows the error is just above the screen shot. It looks like a deletion error. My queston is why is there an attempt at deleting anything if all I am trying to do is create a new Organization. This is not an import or
    upgrade.
    15:03:16|  Error| System.Exception: Action Microsoft.Crm.Tools.Admin.ImportDefaultDataAction failed. ---> Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: delete from [ConnectionRoleObjectTypeCodeBase]
     OUTPUT DELETED.[ConnectionRoleObjectTypeCodeId], 3233
     into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
     where ([ConnectionRoleObjectTypeCodeId] = '952fda76-2f70-e411-bfa3-005056b10f95')

    Hi All,
    I am also getting similar error 
    Microsoft.Crm.BusinessEntities.CrmObjectNotFoundException: No object matched the query: 
    delete from [CustomerAddressBase]
    OUTPUT DELETED.[CustomerAddressId], 1071
    into SubscriptionTrackingDeletedObject (ObjectId, ObjectTypeCode)
    where ([CustomerAddressId] = 'fbb57633-a54f-e411-80ca-005056947598')
    I am getting this error when I am trying to delete all existing customer address and then try to create a new address for a customer.
    So its a kind of blanket update to all existing one replaced with new one.
    Please let me know if any one having solution to this 

  • Discoverer Reports does not work in Multi-org Environment after R12 Upgrade

    Discoverer Reports does not work in Multi-org Environment after R12 Upgrade. Created a simple report using the below query:
    SELECT po_header_id, segment1, type_lookup_code
    FROM po_headers
    WHERE segment1 = '5000002'
    Query works perfectly fine; when i set the ORG_CONTEXT in the database using the command:
    EXEC mo_global.set_policy_context('S',129)
    But the report doesn't fetch any data when ran from an Org based responsibility. We've ensured that the MO: Operting Unit is set accurately and general Oracle reports (PLSQL Program OR XML Publisher) are working perfectly fine.
    ===========
    I followed the steps provided in Metalink Note: 732826.1 - It works for some responsibilities where the MO: Security Profile is not set; but fails for those responsibilities where the MO: Security Profile is set.
    I am looking for specific solution that works irrespective of either the MO: Operating Unit profile is set of not.
    Please suggest. Appreciate your response.
    Thanks,
    Kesava Chunduri

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • How to find out that one module is multi org or not?

    Hi Friends,
    Can any one tell me that how can we findout that one module is multi org or not?
    Thanks in Advance.
    Shravan Kumar Kota.

    ORG_ID tends to be for Multiple Operating Units (ie Multi-Org)
    ORGANIZATION_ID is not used for multiple operating units as far as I know - I am used to it being HR, Expenditure or Inventory organization related.

  • ESYU: R12 - Order Management를 위한 Multi Org Access Control(MOAC) setup 방법

    Purpose
    Oracle Order Management - Version: 12.0 to 12.0
    Information in this document applies to any platform.
    R12의 Order Management에 대핸 Multi Org Access Control(MOAC) setup 방법에 대해 알아본다.
    Solution
    일반적인 MOAC Setup:
    1. HRMS에서 Security Profile을 정의:
    a. HRMS Management responsibility 선택
    b. HRMS Manager> Security> Profile로 이동
    c. Security Profile이 정의되어 있는지 확인 (OM responsibility 혹은 Site level로)
    d. 만일 아직 setup 되어져 있지 않다면 Operating Units를 입력
    e. 저장
    Note: 만일 위 d step과 같이 새로운 security profile을 생성하였다면 concurrent program 'Security List Maintenance'를 꼭 실행해야 한다.
    그렇지 않으면 multiple operating units가 OM forms의 LOV에 나타나지 않을 것이다.
    이 program은 multi-org access를 validating 하기 위해 사용하는 table에 data를 생성한다.
    Navigation: HRMS Management> HRMS Manager> Processes & Reports> Submit Process & Report> Security List Maintenance
    2. MO Profile Options setup:
    a. MO: Security Profile - 이 profile setting은 MOAC functionality를 활성화 한다.
    b. MO: Default Operating Unit - 이 Operating Unit는 OM forms과 report에서 default가 될 것이며, 이를 clear 하거나 변경하기 위해 LOV를 사용할 수 있다.
    Keep the MO profiles in sync:
    MO: Security Profile은 site와 responsibility level로 setting 할 수 있다.
    MO: Default Operating Unit은 site, responsibility, user level로 setting 할 수 있다.
    Application이 원하는대로 동작되지 않는것을 발견하면 이 profile options의 setting 값을 확인한다.
    3. OM setup:
    R12 upgrade 시 OM Profile에서 migrate 된 새로운 OM System Parameters를 확인:
    Order Management Super User> Setup> System Parameters> Values
    (See <<NOTE 393646.1>>-R12 Readiness Cheat Sheet: Migrated OM Profile Options)
    4. Form에서 hidden field 'Operatin Unit'를 활성화시키고 default folder로 저장:
    Sales Order and Order Organizer forms
    Quick Sales order and Organizer forms
    Sales Agreement forms
    Pricing and Availability form
    Other forms
    Note: Sales Order form에서 hidden field 'Operating Unit'를 'Show' 하기 전에 fotm안에 이 field를 위한 공간을 만들어 놓아야 한다.
    예를 들면 Customer Number field를 짧게 하거나 Operating Unit field로 이 field를 덮어씌울수 있다.
    Reference
    Note 393634.1

    Hi Larry,
    Have you considered adding the exec apps.mo_global.set_policy_context call to your connection's start-up script?
    Tools -> Preferences -> Database -> Filename for connection startup scriptNot the most flexible approach, so I'm not sure if it is appropriate for your application, but just a thought. You might create distinct connection names with different start-up scripts for each org_id.
    Regards,
    Gary
    SQL Developer Team

  • About Multi-ORG for EBS R12.1.1 .. Oracle error -20001 ORA-20001 APP-FND-02

    I have two questions:
    1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.
    2. Is there any step-by-step process to set up multi-org?
    I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.
    Thanks

    1. If I have only single organization, Do I need to set up multi-org? We will be using AR, AP, and GL modules only.Yes.
    2. Is there any step-by-step process to set up multi-org?https://forums.oracle.com/forums/search.jspa?threadID=&q=MultiOrg&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    I am getting error: "Oracle error -20001 ORA-20001 APP-FND-02901. You do not have access to any operating unit. Please check if your profile option MO:Security Profile includes any operating unit or the profile option MO: operating unit is set has been detected in MO_GLOBAL_INIT" when I access any form for Entry.Does this happen to all responsibilities?
    Please see the steps in (ORA-20001: APP-FND-02901 Errors Encountered When "Requests" Tab is Selected from PFT or EPF [ID 859072.1]) to set the profile option at the responsibility level for the responsibility you are trying to access.
    Thanks,
    Hussein

  • Convert from Single Org to Multi-Org

    Hi All,
    Can someone tell me what are the steps to convert from Single Org to Multi-Org ?
    Is it only the profile value 'MO: Operating Unit' to be setup ? or any other steps to be setup ?
    Regards
    Jhansi

    Jhansi,
    Please see the following:
    Note 259546.1 - Setting Up Multiple Organizations in Oracle HRMS
    Regards,
    Greg

  • Apps 11i  SET_CLIENT_INFO in Multi-Org environment

    How do you set the client info (dbms_application_info.set_client_info) in a portal session so reports have access to correct Operations ORG data in a multi-org environment

    Hi Hussein,
    Thanks for the quick response.
    Yes, I've gone thru both the notes specified below:
    Discoverer Workbooks Based On Organization Enabled Views Are Not Populated [ID 1293438.1]
    - Tried this option; but this option is messing up a couple of Oracle Standard Functionalities.
    - For ex: If i set this profile option; we are not able to create any receipts using Custom Responsibilities.
    I am able to create the receipt, when i remove this profile option.
    No Data Shows for Reports in Discoverer 10g with Applications Release 12 [ID 1054380.1]
    - I see that the products i am running these reports from AR/GL - already exists in these tables.
    Anything other options??
    Thanks,
    Kesava

  • Accounts Receivable 11/11i Multi-Org Issues

    Hello,
    I am running into some Multi Org issues regarding Aged Trial balances on a Consolidated level and I understand that Auto Lock Box needs to have "feeder" programs set up by Organization or the Cash receipts will result in a bunch of Unapplied Cash.
    Besides these, what other issues are you 11/11i AR Guru's running into because of Mutli-Org.
    Thanks

    Hello ,
    We are also struggling with the similar problem of reconciling the AR and i would seek your help here.
    I believe you have figured out all the SQL queries used to get the AR recon done so i would request if you can share the SQL queries with me as it will help us to do our piece of activity in reconciling the AR.

  • GL_SET_OF_BKS_ID in R12 Multi-Org Form

    Hi,
    I am migrating a 11i form into R12. In R12 it will be a Multi-Org form. For that I have created operating unit items for selecting operating unit.
    I am using MO_GLOBAL.set_policy_context to set selected operating unit context.
    I have 2 profiles being used in my form i.e. ORG_ID and GL_SET_OF_BKS_ID.
    After doing all this exercise mentioned above, ORG_ID value is being retrieved correctly using FND_PROFILE.VALUE but still value of GL_SET_OF_BKS_ID is blank.
    Is there any option available to set this profile value other than FND_PROFILE.put like MO_GLOBAL set ORG_ID value.
    Regards,

    For question 1:
    Changing set_of_books_id to ledger_id in subledgers may be a very bit hit in datamodel changes.
    I think they have changed that in SLA / GL, as Accounting Convention (4th C) has been added to SOB.
    http://realworldoracleapps.blogspot.com/2009/02/r12-financials-overview-and-new.html
    For question 2:
    Yes, set_of_books_id and ledger_id are one and the same. SLA will take care of the mapping.
    You may check the link http://www.orafaq.com/node/2242
    By
    Vamsi

  • Multi org

    Hi,
    i am going through multi org manual and i have some queries on it.
    1. can i have a inventory org that belong to
    more than one operating unit(if inventory
    org and operating unit belong to the
    same set of books).
    2. I am assuming that multiple
    set of books can belong to a business
    group, a legal entity can be assigned to
    only one set of books,an operating unit
    be assigned to only one legal entity. Is
    my assumtion corect?
    3. The manual says "Inventory organization
    determines items available for purchasing"
    can i choose a inventory organization
    (choose inventory organization) that
    belongs to different po operating unit
    so that i can assign the inventory
    items to that po while creating the po.
    Any input is appreciated.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Sridhar:
    Hi,
    i am going through multi org manual and i have some queries on it.
    1. can i have a inventory org that belong to
    more than one operating unit(if inventory
    org and operating unit belong to the
    same set of books).
    2. I am assuming that multiple
    set of books can belong to a business
    group, a legal entity can be assigned to
    only one set of books,an operating unit
    be assigned to only one legal entity. Is
    my assumtion corect?
    3. The manual says "Inventory organization
    determines items available for purchasing"
    can i choose a inventory organization
    (choose inventory organization) that
    belongs to different po operating unit
    so that i can assign the inventory
    items to that po while creating the po.
    Any input is appreciated.
    <HR></BLOCKQUOTE>
    1.no while definining inventory org;you will define to which operating unit it will belong to.
    2.yes
    3.You will have to define the organisation in
    Purchasing/Financial options
    null

  • What are the ways to check multi org is enabled?

    Hi,
    Can anyone tell me what are the methods to check whether multi org is enabled?
    -Senthil

    Hi,
    does multi-org mean multiple inventory organizations? or multiple hr organizations or multiple financials organizations?
    In our implementation we have single set of responsibilities in financials modules but multiple inventory organizations. They are using one set of responsibilities to purchase materials for multiple inventory organizations.
    In other implementation I worked on they are using few PO responsibilities to purchase materials for many inventory organizations?
    What is the relationship? how to map it?
    Thanks,

Maybe you are looking for

  • Search results in iCal using Mountain Lion

    Why did Apple move the search results in iCal from the bottom to the side?  I cannot move it or expand the results.  Now, therefore, I cannot read, or see in an organized way, the results.  Please advise if you have any solutions.

  • K9N2 SLI Platinum video won't initialize with monitor connected

    Hi, I've gone through the RMA process with my vendor and I am on my third motherboard right now and I am still having an issue (so, basically, nightmare scenario here  ). The first and second motherboard failures seemed slightly different but the fai

  • Flash Builder Export Release Build Fails

    I'm having an issue when trying to export the release build of my AIR application in Flash Builder 4.5.  After choosing the key to sign the package and clicking finish to complete the export, it errors saying that "Error occurred while saving the pro

  • How do I get the battery out of my iphone 3g?

    HELP, how do I get the battery out of my iphone 3g?

  • FIOS Xbox app hangs on "loading channels"

    The app was working fine three weeks ago.  I've spoken to two fios representatives regarding the matter, and neither were able to assist me.  I meet all the requirements (Gold, FIOS TV/INTERNET, etc).  I've deleted the app and reinstalled on both xbo