Assistance discovering EOL devices

Short of researching each model (we have over 100 unique models and over 5000 devices) what's best way to find EOL devices/software in my environment? Is there a master EOL list available?

We would replace everything with existing equipment so there wouldn't much of a sales opportunity, aside from some new SmartNet. I have an export with all of our device types so I was hoping to compare it to a master list. Thanks

Similar Messages

I bought an iPhone 5S in the USA, however he warmed up and took off the screen, I live in Brazil and they do not give assistance to my device, but I can not go back to the U.S. just to change the iphone, what should I do to solve my problem ?

I bought an iPhone 5S in the USA, however he warmed up and took off the screen, I live in Brazil and they do not give assistance to my device, but I can not go back to the U.S. just to change the iphone, what should I do to solve my problem ?

I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport" it replies it cannot locate it)
I suppose everything will be fine when you'll be out of censorship....
Perhaps iOS Apple Maps are absolutely useless for expatriate in China.
Use Google Maps instead
BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

Iphone 5- Won't show up in itunes. Error message " Device drivr software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Error message " Device driver software was not successfully installed. Please consult with your device manufacturer for assistance getting this device installed. Digital Still Camera- Failed" HELP!

Hi, I was able to reformat my iPod and that worked. I read it on one of the threads and I am copy pasting the method below:
I opened the "My Computer" window and right-clicked on my ipod, and then selected "Format". I select "Yes" to format since I don't have anything on the nano to delete anymore.
I then Eject my nano from the computer and did a restart while the nano is disconnected from the computer.
Once Windows finish loading I reconnect the USB to the nano(back of computer) which automatically pulls up iTune. It asked me to name the new ipod detected and created a playlist for that specific ipod name.
Pasted from <http://discussions.apple.com/thread.jspa?threadID=1050784&tstart=15>
Thanks!

Help! my iPod touch bluetooth cannot discover my iPad nor mac air, but it can discover other devices... I don't understand why. My Mac and my iPad can't discover it, as well... :(

My iPod touch bluetooth cannot discover my iPad nor mac air, but it can discover other devices... I don't understand why. My Mac and my iPad can't discover it, as well...

Thanks for this... I actually wanted to pair my iPad with my iPod touch so I can use the keynote remote app in my iPod touch to control my keynote presentations... I was able to control my presentations through wifi... I wanted to use the bluetooth since internet connection is quite slow.. The app tells me I can connect through bluetooth with my iPad but sadly, it can't... I've been trying to pair them but the can't discover each other... :(

My apple TV is not discovering my devices. what do i do?

my apple TV is not discovering my devices. what do i do?

If you are referring to airplay
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US

Instrument I/O Assistant Task with Device Driver

Hello All,
I got some messag pop-up hint while using Tools»Create Instrument I/O Task in Labwindow/CVI.
=> "The feature requires the Instrument I/O Assistant.
=> Please install the Instrument I/O Assistant from the NI Device Drivers CD..
I want to practive to create Instrument I/O Task.
Is there any download entry on NI's web site for this?
Much thanks,
nonomiya

Hi Nonomiya,
You simply need to install the Instrument I/O assistant from the device
driver CD that ships with CVI. It should allow you to use these tasks.
As far as something that will act like the assistant and let you create
those tasks in CVI without actually installing the Instrument I/O
Assistant from the device driver CD, there's not much available.
Hope this is helpful,
Regards,
Matt S.
LabVIEW Integration Engineer with experience in LabVIEW Real-Time, LabVIEW FPGA, DAQ, Machine Vision, as well as C/C++. CLAD, working on CLD and CLA.

IPhone 4S bluetooth not discovering bluetooth devices

My iPhone 4S bluetooth is not discovering bluetooth devices, specifically my new Platronics Voyager Pro HD headset which worked just fine with the iPhone 4 even after the recent software upgrade. I noticed that others are having bluetooth discovery issues as well. Will Apple be addressing this problem with a software fix or is this a hardware problem?
CrystalVan

Nevermind! It always helps to re-read the Platronics - how to pair your device instructions. DUH!!!!

Connect to discovered bluetooth devices?

Hello i was wondering how i can open a connection to a newly discovered bluetooth devices. Is there some way to connect to the device using its MAC address?
regards
sebastien

I should have said- connect to two devices at the same time.

Would like assistance with multiple devices with multiple iTunes accounts syncing on one PC

I have had an iPhone for some years now and have been syncing with my PC without issue (first with iPhone 3gs and now with iPhone 4s). My wife bought me an iPad 3 retina in December 2012 which syncs with the same PC as my phone and shares the same iTunes account. Apps downloaded onto one device are automatically downloaded to the other, iMessages are sent and received to both devices also.
My Wife now has an iPad mini with retina (using her own existing iTunes account which she previously used for an iPhone she no longer uses). I synchronised her new iPad mini with my PC assuming iTunes would manage the device and related account and contents separately to my existing account and 2 devices. However this has caused an issue with the sharing of apps. Since doing so I have started seeing updates available on my devices for apps which I have never downloaded, but my wife has. If I tell my iPad to update said apps, I am asked for my Wife's iTunes account password.
On doing some searching via google I now understand that I should have created a second windows profile on my PC for my wife and installed iTunes onto this profile for the purposes of syncing her device.
I would very much like to do this, but would like some assistance on the best course of action for doing so. If I proceed and created a second profile and sync her device to this, I presume I would need to tell iTunes to treat her iPad as a new device (and wonder what would happen to her existing content)? Assuming we do this, I presume the issue of my seeing her app updates would still persist?
Could someone advise if they have any experience with similar issues/queries?

How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
 Cheers, Tom

Problems with Bootcamp Assistant: no bootable device -- insert boot disk and press any key

Hello Guys,
I got a problem setting up Windows 7 on my recently bought 13" MacBook Pro (2,3Ghz Core i5).
I used the bootcamp assistent to create a partition of 50GB on my Mac, everything is fine until now. I insert the Windows 7 disk and follow the instructions. But when I restart in spite of starting the installation of Windows 7, a black screen appears with a note saying "no bootable device -- insert boot disk and press any key". To exit this screen I then have to restart my Computer again, holding down the alt-key. In the following window I can just chose my Mac-Harddrive to boot from, the partition is not shown.
I used the software actualization tool to update to version 10.6.7 which is the most recent one i think.
The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
So as I said, I downloaded the Version of Windows 7 Professional with Service Pack 1 (x64) on my computer and then burned on a DVD. I want to add, that the file I downloaded turned out to be an iso file. At first, I just burned this file on a DVD but since it turned out that i got the above mentioned message, I burned a second DVD with the actual files of the iso (with foldernames like autorun.inf, boot, bootmgr, bootmgr.efi, efi, setup.exe, sources support, and upgrade)
I dont know if these details are of any relevance, but i guess it may be useful since I believe that the burning thing could cause the problems.
I have already browsed the Forum for quite some time now, but I didnt find a case with the exact same problem that I have, so I decided to rather ask you for help now instead of killing my brain like I did before (and I dont really have a clue neither of Macbooks nor of Windows-Computers, its always try and error for me)
I hope somebody can come up with some helpful ideas or a solution.
If you need further details on my system or anything, please feel free to ask
Thank you very much,
David

The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
Apple Disk Utility won't do a proper job and won't work (and it varies, some can start the install but fails later) Has to be burned at 2X Reduced Burn Speed
Also check the support articles for bootcamp
Apple Boot Camp Support

Discovering Network Devices with SNMP not working

I have implemented SCOM 2012 SP1 CU5 on Server 2008 R2 with SQL 2008 R2 all installed on the same VM running side by side with SCOM 2007 R2 v 6.1.7221.0. I have almost fully decommissioned SCOM 2007 and all that remains on it is 2 network devices that
I cannot discover with SCOM 2012 using SNMP, no matter what I try. If I just use ICMP the discovery works. I have checked both the devices and SNMP is enabled and if I run this snmpwalk command on both devices I get a response;
c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.XX -v:1 -c:"public" -os:.1.3.6.1.
2.1.1 -op:.1.3.6.1.2.1.2
SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=NetMan 100 plus
OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.5491.6
OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=5 days, 1:58:58.04
OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=SystemsEngineer
OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=MARMUPS
OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=0
Total: 7
c:\Support\SNMP Walk>SnmpWalk.exe -r:10.X.X.1 -v:1 -c:"scom05" -os:.1.3.6.1.2.1
.1 -op:.1.3.6.1.2.1.2
SnmpWalk v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on http://www.snmpsoft.com ]
OID=.1.3.6.1.2.1.1.1.0, Type=OctetString, Value=SSG-140 version 6.3.0r2.0 (SN: 0
185112006000325, Firewall+VPN)
OID=.1.3.6.1.2.1.1.2.0, Type=OID, Value=1.3.6.1.4.1.3224.1.52
OID=.1.3.6.1.2.1.1.3.0, Type=TimeTicks, Value=359 days, 2:20:16.00
OID=.1.3.6.1.2.1.1.4.0, Type=OctetString, Value=Network
OID=.1.3.6.1.2.1.1.5.0, Type=OctetString, Value=XXXXXX
OID=.1.3.6.1.2.1.1.6.0, Type=OctetString, Value=FXXXXX
OID=.1.3.6.1.2.1.1.7.0, Type=Integer, Value=72
Total: 7
The first device is a Marms UPS which has had its firmware upgraded, which was discovered using SNMP in SCOM 2007 and the second device is a Juniper SSG-140 Firewall, again this is discovered using SNMP in SCOM 2007.
I believe that I have setup SNMP correctly on SCOM 2012 because I have 28 other networks devices discovered using SNMP using an explicit discovery, some of these being newer Marms UPS's, emerson air conditioners, netapp SAN etc.
I have added any and all accepted community names in the SNMP service properties on SCOM 2012 and enabled accept SNMP packets from any host.
Does anyone have any information that they could forward to me or point in the right direction to troubleshoot this issue for eg run some snmp get commands and capture / filter traffic with wireshark, what do I look for? Any other logs to check besides the
obvious ones? Any known issues with SCOM 2012 SP1 and SNMP, should I upgrade to R2? It just seems that some network devices get discovered with ease and others do not and I am running out of ideas. Thank you all in advance.

Patrick, thank you for your reply.
Yes the snmpwalk command is run from the new SCOM 2012 server which has the discovery rule on it.
I don't have any pending network devices, its blank.
Could there be an issue with my discovery rule? I have noticed that each time I make a change to, for eg, the access mode and change this from ICMP to ICMP/SNMP, save it, run it, it doesn't seem to update the said network devices access mode's in network
devices, it just stays on ICMP. Do I have to manually remove the network devices which have been discovered before making any changes to the discovery rule and running it which I have done? They don't seem to appear in network devices pending management either?

My ipod wont discover any device. HELP!

I read on twitter that if you microwave your iPhone/iPod for a min it will charge fully so i decided to try it...i foolishly microwaved my ipod for 5 secs but i have a screen guard and i started smelling smoke so when i checked nothing was wrong with the iPod itself only a smoke like scent on the screen guard. Nxt morning i tried connecting to wifi bt it wont even discover it(i think its the microwave thingy that caused it), yet every other device in my house does. I tried bluetooth....same thing and im really scared... Does any one know what i can do? and if the microwave thing is real?

Someone else posted today about micrwaving their iPod and they broke it.
Microwaves imparts energy to the iPod and can damage it.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will likely exchange your iPod for a refurbished one for $149

How to discover network devices?

We have a SCOM2012R2 management group with 6+ management servers. If I want to configure discovery of network devices,
1. can I use "All management servers" pool to discover them? or
2. Can I specify/reserve two of them just to do the discover and manage those network devices (a handful devices), and how?
3. If I create a resource pool contains only those two MSs, do I need to remove them from "All management servers" pool?

Yes, you can create one discovery rule per management server or gateway server.
http://blogs.technet.com/b/ptsblog/archive/2011/11/28/network-monitoring-with-system-center-operations-manager-2012.aspx
Operations Manager supports monitoring of the following number of network devices:
2000 network devices (approximately 25,000 monitored ports) managed by two resource pools
1000 network devices (approximately 12,500 monitored ports) managed by a resource pool that has three or more management servers
500 network devices (approximately 6,250 monitored ports) managed by a resource pool that has two or more gateway servers
Also you can refer below link
http://technet.microsoft.com/en-us/library/hh212935.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Discovering Network devices on 2 different subnets

Hello
I am trying to discover the network devices available in 2 different subnets (10.0.0.0) and (172.0.0.0), I installed 2 interface cards on the operations manager management server, each interface should reach the network devices in their address range,
I tested reaching various network devices in the 2 subnets "using the application MIB browser" and everything is ok.
now I added the devices IP addresses to the network discovery rule, 90% of the devices are discovered but some devices are not shown in the discovered devices nor the pending management pages! while they are added to the rule.
I logged onto the failed device which its interface is connected to the subnet 172.0.0.0 and checked the snmp logs and found that the operations manager management server is failing to access the device using SNMP using the subnet 10.0.0.0.
so I think now that operations manager uses the primary interface card 10.0.0.0 to access the remote device using snmp, so how do I enforce SCOM to discover the 172.0.0.0 devices using the 172.0.0.0 interface card.
Thank you
Mohammad, IT NOC Team

Hi Yan,
no many of the devices in the subnet 172.0.0.0 are discovered but some of them are not, those which are not discovered and are not appearing under the pending management. also when accessing those devices and checking the snmp logs I see failed attempts
to read snmp from the SCOM IP address which is on the subnet 10.0.0.0 isn't strange that SCOM uses the IP 10.0.0.0 to access a device on the subnet 172.0.0.0
Thanks
Mohammad, IT NOC Team

Discover network devices

Hello all,
I'm trying to understand the 'network discovery' method and wanted to know what kind of devices it can discover using this method?
thanks

It will and can discover just about anything attached to the network but most of those devices can;t be managed in any way and or very limited information is collected so doing this typically isn't done at all as it simply clutters ConfigMgr.
Jason | http://blog.configmgrftw.com

Assistance discovering EOL devices

Similar Messages

Maybe you are looking for