Assistance needed using PCL4

I am new to cluster tables and I'm looking at at existing program that uses them and I'm seeing the use of some "tables" (not sure if that's what they're called) named "HEADER", "BELEGE" and "VERSION". BELEGE, which is German for "evidence", is apparently an "audit" table???
I guess my question is, are these actual tables that are in PCL4? Is there a list of these anywhere? The documentation stinks.
Thanks a bunch.

Hi,
Do you mean Photoshop Elements or Photoshop Premiere?
If you are referring to Photoshop Elements, load the editor, go to the Help menu and select About Plug-in -> Camera Raw.
That should tell you which version of Camera Raw you have installed.
If you don't see the Camera Raw dialog when opening a raw file, it could be that your screen resolution is too low.
Please tell us which operating system you are running on and your screen resolution.
Brian

Similar Messages

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

Hi there,
Use the method described in the link below to get back up and running:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Help needed using adobe exportpdf

The first time I used adobe export pdf it worked well. However the next time and every other time I try to convert a pdf doc to word docx I get the error message at the end of the uploading session. "pdf doc failed to export to m,icrosoft word. There was an unexpected problem.
Anyone overcome this problem?

Hi Stacy
               Thanks for that info. I was aware of the 100MB limit but
your response made me think again and go back to the problem and this is
what I found. The first pdf document I uploaded into Adobe export pdf was 43
MB and it went through fine. when I looked at the conversion to Word docx I
found it had been transformed into 83MB.
So the conversion (which was a children's book with lots of images in it)
resulted in an increase of MBs by a factor of 1.7.
The second pdf document I uploaded was 64MB and this failed. If I apply the
1.7 factor then the Word docx I wanted was going to be 109MB and therefore
over the 100MB limit.
I didn't know that converting pdf to word would increase the MB like that.
Why, I don't know so thanks for your help I've learnt something new.
Cheers
            Garth
In a message dated 07/10/2013 04:42:36 GMT Daylight Time,
[email protected] writes:
Re: Help needed using adobe exportpdf
created by StacySison (http://forums.adobe.com/people/StacySison) in
Adobe ExportPDF - View the full discussion
(http://forums.adobe.com/message/5740689#5740689)

I need use a webcam in labview. Is it possible?

I need use a webcam in labview, is it possible?
BYEE!!!

I haven't tried this, but here's a page with some info and VIs to download.
http://www.cs.unc.edu/~parente/labview/index.shtml
A Google search on "webcam +labview" will probably return other pages.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

Need assistance in using psc 1315v printer on snow leopard

My printer doesn't work on snow leopard. I tried the add printer in system preferences, but when I tried to add the printer it stated the driver is not available from apple, contact manufacturer. I then tried to reinstall my drivers from HP, but that didn't work. Snow Leopard recognizes my printer, but I am unable to add this printer, and if i am able to add this printer with the HP driver it won't let me printer.
There has to be a generic driver within the list of printers apple provides which will let me use the printing function of the printer. Do you guys have any recommendations regarding which driver is the generic one that will work?

This thread may help:
http://discussions.apple.com/thread.jspa?messageID=10064280&#10064280
"OK, this is partly my fault. When I first posted the instructions earlier in this thread, I thought that the print drivers for this device were already in Snow Leopard. As it turns out, only the scan drivers are there at the moment. The print drivers should be made available at some point in the future through Apple Software Update. In the meantime you might get some of the functionality back by installing the 10.5 drivers for your device. This method however is NOT supported by HP and as such is not recommended."

HT1449 How do I find out which file iTunes actually needs/uses?

I have recently transferred my iTunes libary to an external hard drive (Migration Assistant didn't work, so I dragged and dropped the whole iTunes folder from my other, Windows, external hard drive straight to the new external hard drive, and added the other file that does playlists etc by e-mailing the library file to myself, and 'importing playlist' on the new mac... I still don't have ratings, but that's not a biggie). This is to use as a central library for all users. Works ok, both users face it, all ok... However, the total size of my music library is some 40gb, according to my old laptop and itunes on the new Mac... but on the external hard drive, there is now some 139gb of data (the only other stuff is about 80 pictures, so not much in data terms). This isn't a pressing need as the new external drive is 2tb, backing up to a 2tb Time Capsule, so still plenty of storage left for my wife to add her photos and her music.
So how do I know what to delete? There's each album listed separately, and some old temp files (have deleted the latter), but I'm scared of deleting things I do actually need. I'm at work now, so can't give exact descriptions. Anyone have any clues?

Have read up a bit more, and I think I've found a solution... my wife's music is very much smaller than mine, and I'd like to preserve the ratings on my collection. She's not bothered.
So here's the plan: broadly following iTunes: How to move your music to a new computer, using external drive.
1. delete the iTunes folder previously placed on the new, Mac ext HD (what will be the joint library). No media hopefully now on this machine.
2. copy her iTunes folder from the old ext HD to the desktop of the new Mac. This was consolidated before copying to the ext HD. This will essentially become the backed-up 'previous content' to add back in later.
3. Delete her iTunes folder from the old ext HD to avoid confusion.
4. Copy my old laptop's iTunes folder to the old ext HD
5. Drag the itunes folder from the old ext HD to the new mac ext HD, both showing on the desktop (which should preserve rating etc, right?)
6. add back in the itunes folder on the desktop that I placed there earlier, using file> add to library in iTunes. (ratings not preserved)
Both users iTunes are already instructed to face the new ext HD for their library.
Will this work? Why is one set of ratings etc preserved but not the other?

Can't get ATV working with Onkyo TX-SR605-URGENT ASSISTANCE NEEDED!!

I'm hoping someone will be able to give me some advice, as I've now spent way too much time trying to figure out what's going wrong. I've just purchased the Onkyo receiver, which in itself is an extremely daunting piece of equipment after my very straightforward Rotel stereo amp!
I have only 1 HDMI connection available on my 32" Panasonic LCD TV & have, to date, had my ATV connected to it. With my ATV also connected to my amp (via RCA cable), I've been happily viewing/listening to all my iTunes content this way. I understand from reading elsewhere in this forum that I should be able to maintain my HDMI connection to ATV, connect into the receiver using optical, and by so doing, obtain the same results (if not better, thanks to the optical connection) as was previously the case. So far, I've been unable to do this. The only way I've been able to get any audio happening through the speakers is by reconnecting the RCA cable. The optical cable I purchased by the way is a good quality one so I doubt this is where the problem lies - although I guess it's possible.
The 1st problem I encountered when endeavouring to set the system up was that I was unable to get any onscreen information, as I couldn't find an AV input that responded to the receiver's 'setup instructions'. I assumed this would come via the TV's HDMI AV option, given the ATV is the means of connecting to the TV & that's connected via HDMI, but no joy. However, I did some of the basic setup w/o the onscreen visuals, and proceeded to see if I could access my iTunes content with the connections I referred to earlier. As I said before ... no go w/o the RCA cable connected and even then, no sound through the speakers if I reverted to just watching the TV.
I'm driving myself crazy here, and am now at the point where I can see no value in continuing to read & re-read the Onkyo manual. Although I can accept that it's likely to take me some time to learn how to properly drive this beast and get the most out of it, I don't think (from what I've read elsewhere here) that it should be this hard to get what I'm wanting up and running.
Please HELP and save my sanity!
[Thanks in advance to anyone who comes to the rescue ]

jrmccoy, thank you so much! I have never used an optical connection until now, & so was not aware of the necessity to get the 'snap' happening in order to get a good connection. With some trepidation, I applied the required force to the connection to the ATV - sure enough, it 'snapped' in. I tried to get the receiver connection to snap as well, but had no luck there - it seems to be a very 'sloppy' rather than tight connection that slips out with very little effort. However, after pushing really hard on the cable & getting no better connection, I gave up & tried it as was. The result was that , yipee, I now have it all working as I'd anticipated it should. The only thing I still don't have, is the TV sound coming through the speakers - I thought that with the ATV providing the conduit between the TV & the receiver, I wouldn't need any other connection from the receiver to the TV. I suspect now that that was an incorrect assumption! Thought it was all a bit too easy ... sigh.
Once again Apple Discussions have come to my rescue - I honestly don't know what I'd do without the assistance of all you generous people out there with so much & such wide-ranging knowledge!

Urgent Assistance needed on this

Hi, I am fairly new to Java and this assignment is way over my knowledge, if anyone able to assist me on the whole coding, that would be great. Thanks all.
I am thinking on using array and the file heading on hardware.dat can be omitted.
Task-
Imagine that you are an owner of a hardware store and need to keep an inventory that can tell you what different kind of tools you have how many of each you have on hand and cost of each one.
Now do the following:
(1) Write a program (Tool.java) that,
(1.1) Initializes (and creates) a file ?hardware.dat?
(1.2) lets you input that data concerning each tool, i.e. the program must ask the user for input and each of the user input is written back in the file.
The file must have the following format:
Record# Tool Name Qty Cost per item (A$)
1 Electric Sander 18 35.99
2 Hammer 128 10.00
3 Jigsaw 16 14.25
4 Lawn mower 10 79.50
5 Power saw 8 89.99
6 Screwdriver 236 4.99
7 Sledgehammer 32 19.75
8 Wrench 65 6.48
(1.3) Exception handling that must be taken into account-
(1.3.1) User must not input incorrect data
(1.3.2) Cost of the item must be a number
(2) Write another program (ListToolDetails.java) that,
(2.1) lets you list all the tools, i.e. it will read the data from ?hardware.dat? in a proper manner (you can choose the display format), File name should not be hard coded.
(2.2) lets you delete a record for a tool, as an example- you can delete all the details pertaining to the tool ? Wrench. Once you delete the information, records must be updated in the ?dat? file.
(2.3) List the total price(rounded to two decimal places) of each tool, as an example, the total price of all the Hammers is A$128 * 10 = A$1280.00
(2.4) Exception handling that must be taken into account-
(2.3.1) In case user inputs an incorrect file name
(2.3.2) In case user inputs incorrect Tool name (when the user wants to delete something)
Bonus Task
This task deals with the inclusion of Javadoc comments and generation of documentation pages.
Task-
Your task is to add meaningful javadoc comments in all the programs and generate HTML documentation pages.

Hi, I am fairly new to Java and this assignment is
way over my knowledge, if anyone able to assist me on
the whole coding, that would be great. Thanks all.
I am thinking on using array and the file heading on
hardware.dat can be omitted.
Task-
Imagine that you are an owner of a hardware store and
need to keep an inventory that can tell you what
different kind of tools you have how many of each you
have on hand and cost of each one.
Now do the following:
(1) Write a program (Tool.java) that,
(1.1) Initializes (and creates) a file
?hardware.dat?
(1.2) lets you input that data concerning each tool,
i.e. the program must ask the user for input and each
of the user input is written back in the file.
The file must have the following format:
Record# Tool Name Qty Cost per item (A$)
1 Electric Sander 18 35.99
2 Hammer 128 10.00
3 Jigsaw 16 14.25
4 Lawn mower 10 79.50
5 Power saw 8 89.99
6 Screwdriver 236 4.99
7 Sledgehammer 32 19.75
8 Wrench 65 6.48
(1.3) Exception handling that must be taken into
account-
(1.3.1) User must not input incorrect data
(1.3.2) Cost of the item must be a number
(2) Write another program (ListToolDetails.java)
that,
(2.1) lets you list all the tools, i.e. it will read
the data from ?hardware.dat? in a proper manner (you
can choose the display format), File name should not
be hard coded.
(2.2) lets you delete a record for a tool, as an
example- you can delete all the details pertaining to
the tool ? Wrench. Once you delete the information,
records must be updated in the ?dat? file.
(2.3) List the total price(rounded to two decimal
places) of each tool, as an example, the total price
of all the Hammers is A$128 * 10 = A$1280.00
(2.4) Exception handling that must be taken into
account-
(2.3.1) In case user inputs an incorrect file name
(2.3.2) In case user inputs incorrect Tool name (when
the user wants to delete something)
Bonus Task
This task deals with the inclusion of Javadoc
comments and generation of documentation pages.
Task-
Your task is to add meaningful javadoc comments in
all the programs and generate HTML documentation
pages.First of all , If its your assignment you are ment to do it your self !!
if u have a problem understanding stuff ask your tutor or prof.
they are paid to teach u this stuff....
second : break the problem in to small task as suggested before, it will help u understand the stuff better
Last thing : No one here is gona do your home work for u
so better start doing some research and if u have an implementation or a logic problem then post them here, sure people will help.
now from what i read i think u need to start looking up on
1) get data from the user : u need some thing like bufferedreader
2) validate the input : check with the upper and lower bounds
3) File handing : research on how to write to a file there are a milion pages there on the web teaching you this stuff

Assistant needs access to boss's calendar on Exchange on her iphone

I have a dilemma.
The assistant already has access to her boss's calendar on her Outlook 2007 on Exchange 2010. But not on her iphone. She has her calendar but cannot get to her boss's calendar. How can I make this work?
We are using Air-Watch MDM to enroll and manage the iPhones.
Thanks,

We are also using AirWatch in my company and have been asked a similar question for some assistants. Let me first state that while it is possible - there are numerous cautions to doing this!
If the assistant's phone is properly enrolled and they receive their data from Exchange, you can manually create another Exchange account on their iPhone for their manager and select what deliverables they would like to sync. AirWatch's SEG (Secure Email Gateway) will use the compliance of her/his iPhone to passthrough to Exchange any valid account on that device. Unlike Outlook/Exchange - there is no view only for the assistant, they will have full control of that mailbox - this gets confusing with things like calendar - because they will get notifications for both meetings and the pop-ups do not indicate which account they are for. (there is some setting changes you can make to set the assistants calendar as the default, but I have not seen notifications on/off per calendar account - only the calendar as a whole).
When we tested this, we are not using certificates to sync the passwords (that's another discussion), so everytime the manager changes their AD password (which we sync with their Outlook password), they would have to go and manually change it on the assistants phone.
In short - it is possible to have multiple accounts on an enrolled device, but the additional ones will need to be manually created (since the EAS payload pulls the Enrolled Information from the AirWatch agent for email setup), they will have full access to that mail account and can get confusing on the calendar side.

Urgent assistance needed on textfields/labels please!!

I have been trying for days to add labels and textFields to my applet and can only manage to display one.
My assignment instructions suggest I use makeTextField method and call the setEditable method from the makeTextField method to avoid repetition of code.
The following is my code...I must have this done in the next couple of days so if someone could please please give me some assistance it would be really appreciated....also, thoughts on my layout would be great as well...i cant seem to set up my buttons in the correct order.
import java.awt.*;
import java.awt.event.*;
import java.applet.Applet;
public class Registry4b extends Applet implements ActionListener {
public void init() {
backgroundColor = new Color(200,255,255);
this.setLayout(new FlowLayout(FlowLayout.CENTER,4,1));
makeButtons();
row1 = makePanel(new FlowLayout(FlowLayout.LEFT,4,2),backgroundColor);
row1.add(clearB);
row1.add(studFindB);
row1.add(studForB);
row1.add(courB);
row2 = makePanel(new FlowLayout(FlowLayout.LEFT,4,2),backgroundColor);
row2.add(studBackB);
row2.add(courFindB);
row2.add(courForB);
row2.add(studB);
row3 = makePanel(new FlowLayout(FlowLayout.LEFT,4,2),backgroundColor);
row3.add(courBackB);
add(row1);
add(row2);
add(row3);
Panel p = new Panel(new BorderLayout());
Label studID = new Label("STUDENT ID");
TextField entry = new TextField(" ");
p.add(studID,BorderLayout.WEST);
p.add(entry,BorderLayout.CENTER);
Label firstTF = new Label("FIRST NAME");
makePanel(new BorderLayout(2,2),backgroundColor);
add("West",courBackB);
add("East",studB);
makePanel(new BorderLayout(2,2),backgroundColor);
add("North",p);
add("South",courForB);
makePanel(new BorderLayout(2,2),backgroundColor);
add("North",courFindB);
add("South",studBackB);
makePanel(new BorderLayout(2,2),backgroundColor);
add("West",p);
add("East",studForB);
setBackground(backgroundColor);
clearB.addActionListener(this);
courBackB.addActionListener(this);
studB.addActionListener(this);
courForB.addActionListener(this);
courFindB.addActionListener(this);
studBackB.addActionListener(this);
courB.addActionListener(this);
studForB.addActionListener(this);
studFindB.addActionListener(this);
private Label makeLabel(String label) {
Label label1 = new Label(label,Label.RIGHT);
label1.setFont(new Font("Courier",Font.BOLD,10));
return label1;
public void start() {
appletWidth = 8*4+row1.getSize().width;
appletHeight = 8*(2+courBackB.getSize().height);
public void paint(Graphics g) {
setSize(appletWidth,appletHeight);
validate();
public void actionPerformed(ActionEvent e) {
String s = (String)e.getActionCommand();
private Button makeButton(String label, Color color, Font font) {
Button b = new Button(label);
b.setBackground(color);
b.setFont(font);
return b;
private Panel makePanel(LayoutManager lm, Color c) {
Panel p = new Panel();
p.setLayout(lm);
p.setBackground(c);
return p;
private void makeButtons() {
Font f = new Font("Courier", Font.BOLD, 10);
Color grey = new Color(255,100,100);
clearB = makeButton("CLEAR",grey,f);
studB = makeButton(" STUDENTS ",grey,f);
studForB = makeButton("->",grey,f);
studFindB = makeButton("FIND",grey,f);
courFindB = makeButton("FIND",grey,f);
studBackB = makeButton("<-",grey,f);
courB = makeButton(" COURSES ",grey,f);
courBackB = makeButton("<-",grey,f);
courForB = makeButton("->",grey,f);
TextField addressTF = new TextField("ADDRESS", 10);
static final String initialString = " ";
String Filler = " ";
Panel row1, row2, row3, p1;
int appletWidth, appletHeight;
Button clearB, studForB, studFindB, courFindB,
studBackB,courB, courBackB, studB, courForB;
Color backgroundColor;
thanks in advance for anything someone can do for me

I haven't tried your code, but since you use a layout manager, you shouldnt need to think about setting the size for the applet.
And I think when you call the method makePanel the last 4 times, you want to use the returned panel to add your components on. Right now you add everything directly to the panel and never use the panels you create.
And you also reuse some of your components more than once (like e.g. courBackB). You need to create a new button everytime, otherwise if you try to add the same button twice, the second one will not be displayed.
Try to add the components one by one and check it is displayed before you add the next one.
If you want to check what components and their sizes etc, you have on your applet, here is a little trick. Get the focus on your applet and press ctrl+shift+F1. If you run the applet in a browser, you will get something in the java console that displays all your GUI components and a description of them. So
It might help you.
Also take a look of the Java Tutorial for the AWT. You can download it from
http://java.sun.com/docs/books/tutorial/information/download.html
called tut-OLDui.zip.

Assistance needed with new monitor and printing from LR3

I just purchased a new IPS monitor. I have calibrated it using the HP Display assistant that came with it. It is an HP ZR 22w. I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7. I would appreciate any assistance that anyone can provide. Thank you

I think the "HP Display assistant" is a software tool, is that right?
Ideally with Lightroom, you should use a hardware calibration/profiling tool (Spyder, Eye One, Color Munki etc). In particular, you need a monitor profile that contains colour space information. I had a look through the HP Display Assistant user manual, and it appears the software does calibration but it probably doesn't put colour space info in the profile. It'll be better than nothing, but a hardware tool is better.
However:
I saved my calibration as a preset - however - this is not appearing as a profile when I try to select it in the print module. the checkbox for "include display profiles" is ticked. If I allow the printer to manage - the pictures are much warmer than on the IPS display. My printer is a canon mg6120 and I am running windows 7
This is not what you want to do! The profile that the HP Display Assistant creates is for the monitor, and only for the monitor. It gets the right white point and tone curve for the monitor. What you need in the profile drop-down in LR print module is a printer profile, not a monitor profile (except on very special circumstances).
I'm not familiar with the MG6120, but when I googled "profiles for canon mg6120" I got a lot of hits, so I assume profiles are available. It's quite likely that some came with the printer driver, and were installed with the printer software. When you select "profile" in LR print module (you may well have to go to "Other..." to see them all) then there should be profiles for the printer - possible lots of them - one or more for each paper type. If they're not there, see the Canon documentation (or google it) to find out how to load them.
If you can't find any profiles for the printer, then try using sRGB (or probably it's "sRGB IEC..."). Without colour management, your printer will probably expect sRGB images, so this should be roughly right, but a specific profile for the printer is better. This is one of those very special circumstances when something other than a printer profile (and sRGB isn't a printer profile) may be better than nothing.

Messed up Setup Assistant - need to copy TM backups to new ext HD then run Migration Assistant, I think

On a new 27" iMac, I ran the Setup Assistant a couple of days ago to transfer info from TM backups on an external hard drive. Unfortunately, there were clones on there from Feb 2010 (I didn't understand that TM needs to be alone on a HD) and the Setup Assistant picked ran those preferentially so it appeared that I had lost everything since Feb 2010. HOWEVER, the TM backups are still in the Backups.backupdb folder, and I can access each of the individual files. Now the external HD has not only the 3 clones and the Backups.badkupdb but also folders for Applications, Desktop, dev, Developer, home, Library, net, System, User Guides And Information, and Users. Most are dated to Feb 2010, but the System and Developer folders seem to have been updated to 6 Aug 2012 and 8 Aug 2012. The TM backups contain User info for the Office 2008 suite, including Entourage, and this is what I need -- all of my emails, documents, etc.
I have been trying to copy just the Backups.backupdb folder to a new external HD before doing anything else. I have followed the directions given by Apple at http://support.apple.com/kb/HT5096?viewlocale=en_US&locale=en_US. Unfortunately, this yields a nifty error message: "The operation can’t be completed because an unexpected error occurred (error code -8003)." I have not found a solution in the Apple communities for this error message in the TM backup copying process - all mentions seem to relate to problems emptying the Trash when deleting TM backups. I have NOT tried the cloning process mentioned in this thread:https://discussions.apple.com/message/16601049#16601049. If the copying process has failed, will the cloning process allow me to pick up JUST the TM backups without damaging the TM backups?
I am thinking that once I have the TM backups successfully copied, I will use that new copy - without the clones - to run Migration Assistant. At this point, will it be better to use Migration Assistant OR go back and delete everything on the new 27" iMac and reload Lion, then run Setup Assistant again? The thought of going back to square one with Lion has me more than a bit rattled, to tell the truth.
Have others had luck with Apple tech support or a Genius Bar visit for such things?
Any guidance or suggestions are much appreciated.

Problem solved by taking the new iMac and the LaCie disk to the local Apple Store. They verified the LaCie disk with Disk Utility (thankfully it passed) then wiped the iMac clean, reinstalled Lion (10.7.3), and loaded the latest TM backup. Everything needed transferred over, so I'm back in business. HURRAY! I am setting up a new external HD for the solitary TM backups, and a separate external HD for clones. And, I now have access to a secure server for temporary storage of critical client files in addition to manually copying critical documents to a flash drive frequently while working on them.

Query Assistance Needed - Please

Monthly Training Table
>> monthly_training.record_id (int)
>> , monthly_training.trng_year (int)
>> , monthly_training.trng_month (int)
>> , monthly_training.trng_title (varchar)
>> , monthly_training.trng_code (varchar)
>> , monthly_training.trng_narrative (longtext)
Training Completed Table
>> training_completed.record_id (int)
>> , training_completed.recorded_by (varchar)
>> , training_completed.emp_id (varchar)
>> , training_completed.trng_year (int)
>> , training_completed.trng_quarter (int)
>> , training_completed.trng_month (int)
>> , training_completed.trng_date (date)
>> , training_completed.trng_category (varchar)
>> , training_completed.trng_sub_category (varchar)
>> , training_completed.trng_code (varchar)
>> , training_completed.trng_start_time (time)
>> , training_completed.trng_stop_time (time)
>> , training_completed.trng_hours (decimal)
DB = MySQL -- CF8
emp_id = B1200 < stored in cookie at login
Scenario –
Monthly Training Table - contains scheduled training for an
entire year. This training is displayed on a page per the month the
training should be completed in.
Training Completed Table – contains the information of
what training was completed per individual.
Task At Hand – I would like to display the monthly
scheduled training for the current year and cross reference the
completed training table and if the individual has completed the
training further display something next to the training title, to
signify completed.
Example:
Computer Training – Outlook
* Off. Dev. – Emergency Scene Safety
Fire Suppression – Salvage
I have tried many methods of querying this but have not been
able to achieve the goal. Perhaps I am making this harder than it
needs to be. Hopefully someone in the forum can shed some light on
what I should be doing. Assistance would be greatly appreciated.
Leonard

yes, i see it now - the WHERE clause makes sure only
completed training
of that employee are selected... my bad - i should have
changed that
after you told me that emp_id field was in tc table, not
mt...
ok, here we go... this will be a little more complicated...
try this beast:
<cfquery name="rs_trng_ck" datasource="#datasource#">
SELECT mt.trng_title, mt.trng_month, mt.trng_code,
tcsq.completed
FROM monthly_training mt
LEFT JOIN
(SELECT tc.trng_code AS completed
FROM training_completed tc
WHERE tc.emp_id = <cfqueryparam cfsqltype="cf_sql_varchar"
value="#emp_id#">) AS tcsq
ON
mt.trng_code = tcsq.completed
WHERE mt.trng_year = YEAR(NOW())
ORDER BY mt.trng_month, mt.trng_title
</cfquery>
basically, what this does is uses a sub-query in the FROM
clause to
pre-select only those records from tc table where emp_id
field equals
the #emp_id# value, and only then left-joins the mt table to
this
sub-query recordset, which should result in ALL records from
mt table
and only those from tc table where emp_id is correct
the <cfoutput ...> part shoudl stay the same as before.
hope this one works :)
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Unlock iPhoto Assistance Needed:, Unlock iPhoto Assistance Needed:

OS X Version 10.8. I just updated the iPhoto on August 14, 2012, and I store my iPhoto on an external 3 TB Drive. I also purchased and downloaded iPhoto Manager on August 14, 2012 which did allow me to export two additional iPhoto Libraries into the newly update one. After all the updates were complete and images showing correctly, I felt safe enough to download the camera's memory card holding 500 additional photos and once they were downloaded I deleted them from the card. I went to shut down the iPhoto Library a couple different ways and it started to automatically "Update Library". After 15 minutes I realized it had stalled out at 65% completion. I then went to the Utility Manger and Forced Quit the iPhoto. When attempting to reopen I received the following message "the iPhoto Library is locked, on a locked disk, or you do not have permission to make changes to it". I'm obviously concerned my latest dowload of 500 photos are not stored/saved correctly, and I deleted them from the card but even more concerned I may not be able to access any of my prior photos if I cannot unlock this program. How did it get locked? Should I be afraid to unplug my external or turn my computer off before this problem is resolved? Any and all help will be much appreciated, especially if it's given in the most elementary terms possible. Although I've had my mac for almost two years now, I generally find myself using the Windows system which I had to install to run my business. Therefore I do not know more than 5% of the tricks, shortcuts, and most definitely lingo of Mac to efficiently navigate to a better place.
Sincerely,
06Deuce

LN,
Thank you very much for your quick response! I understand your first two paragraphs, however I have questions on the third and pretty much over my head on the fourth unfortunately.
Paragraph 3 regarding the download of Fresh Crop, is it certain my 500 recently downloaded new photos are not saved into iPhoto because the update didn't complete? Should I wait until I get iPhoto back opened up to confirm they are not there, or are they pretty much gone so move forward with this purchase?
Paragraph 4
I do not know what you mean by "rebuild the library". I had assistance last night exporting two additional libraries into the updated Library with iPhoto Manager and that took an overnight process of updating. Are you saying I need to repeat this process?
Sincerely,
06Deuce

HT1338 my old mac cant connect to internet and my migration assistant needs an upgrade is there any way to download to my new mac and install the upgrade on my old one so i can complete the migration process?

I just purchase a new IMac, I am trying to use migration assistant. the problem I am having is my old mac cannot connect to the internet and it needs a software update, can I download the update on my new mac and install it somehow on my old mac?

If it's a free update, search Apple's support site for it and move the dmg as you would any file. If it's a paid upgrade, no; the Mac App Store upgrades, while downloadable, can't be downloaded from a Mac which can't use them.
(78632)

Assistance needed using PCL4

Similar Messages

Maybe you are looking for