Assistance to install audio driver on my dv9000

model hp pavilion dv9000
windows vista 32-bit
i m not able to install audio driver on my laptop. every time i try to do it, it says error : Driver installation failed: could not find MEDIA device for this driver. pls help.
also on the quick launch buttons when i press mute the blue colour does not change to red .... kindly help

Please try install driver from hp.com; linke below.
http://ftp.hp.com/pub/softpaq/sp39001-39500/sp39414.exe
hope it helps.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Similar Messages

No audio from my hp 550. i truble to re install audio driver.

i try to re- install audio drive and controll all audio icons and botton on my pc.
no audio!!! help pls

Brandon2184 wrote:
I would try to reset the printing system: http://support.apple.com/kb/ht1341
Resetting the printing system doesn't affect the already-installed drivers, and you shouldn't need to do anything with those anyway.
Resetting the Printing System affects all installed printers, they will become uninstalled printers.

How can I install audio driver from BootCamp into Windows 7?

After an uneventful installation of Window 7 (64) onto iMac cor 2duo OS X 10.6.7.
NO SOUND.
I have tried to replace the Audio Driver HD through Device Manager: it is not working
a) if I disable the Windows Driver and try to install the Cirrus driver from the BootCamp disc, I am informed that "device already has the optimal driver"
b) if I unistall the WIndows driver, Sound Video Game Controller disappears from Device Manager-so there is no place through which I can install a new driver.
c) If I start from the BootCamp/Driver folder and select Cirrus and Install, I am again getting the answer that the "device already has the optimal driver"
I am frustrated! Please, can you advise how to proceed?

You do NOT want to disable unless you are not going to use a device.
You want to rollback or uninstall and get Cirrus driver.
Try Boot Camp (Setup) repair-reinstall - to enable the device.

HP ENVY TS 15 Notebook PC: Problems installing audio driver (High Definition Audio device)

Hello all,
My product is the HP ENVY TS 15 Notebook PC.
Product number: E3B65PA#AR6
OS: Windows 8.1 64-bit
A few days ago, I upgraded my windows from windows 8 to windows 8.1 and found that no sound coming from the HDTV when connecting my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. I have checked the HDMI cable and it is working fine with other laptop.
Device manager is showing 2 device :
High Definition audio device ( Showing yellow traingle)
IDT High Definition Audio CODEC
When I am opening the properties of High Definition audio device it is showing :
This device cannot start (code 10)
{Operation Failed}
The requested operation was unsuccessful.
If anyone knows how to fix the problem, please help me
thanks in advance
This question was solved.
View Solution.

Hi:
The IDT audio driver (notebook speakers) appears to be working fine.
The problem is probably with the Intel graphics driver which controls the HDMI audio.
My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208...

Lenovo G550 59-046612 problem installing audio driver in XP - SP2

hi,
I have recently bought a Lenovo G550 59-046612 laptop. As the given driver cd includes all the drivers for Windows 7 I downloaded all the required drivers for my laptop from the following list
http://consumersupport.lenovo.com/in/en/DriversDownLoads/APR_Driver_List.aspx?CategoryID=600154&OS=W...
as I am using windows XP Service Pack2. All the drivers installed fine but I got problem installing the audio driver. I tried both from the downloaded exe and also from the extracted folder named drivers in my C drive.I was getting the error "A conexant audio device could not be found.The application will now exit." Please help me out.
Thanks in advance
Sudip

have you tried to install drivers on safe mode or manually?
after you locate the .inf file for the driver that you want to install, manually install the new driver. to do this, follow these steps:
- click start, right-click computer, and then click properties.in the tasks pane, click device manager.
- if you are prompted for an administrator password or confirmation, type your password or click continue.
- in device manager, locate the device for which you want to install the driver.
note to display hidden devices, click show hidden devices on the view menu.
- right-click the device, and then click update driver software.
- click browse my computer for driver software, click let me pick from a list of device drivers on my computer, and then click have disk.
- in the install from disk dialog box, click browse, locate an .inf file for the device driver that you want to install, and then click open.
- follow the steps in the update driver software devicename dialog box to update the driver

How to install audio driver on a presario sr1907cl

I am having one hell of a time trying to install the audio driver on a compaq presario sr1907cl. When I try to install sp26731, it said I have to install UAA Audio Buss Driver from Microsoft, so when I tryed to install it, I got a window that said my os is newer than the driver. Seems like I'm just spinning my wheels. Don't know what to do to get sound on this thing. Any help would be greatly appriciated. I've never seen anything like this just to install a sound driver, but I'm sure this has happened to lots of others.
Thank You Much,
[email protected]
This question was solved.
View Solution.

Hi:
You probably should install the latest XP nForce chipset driver for your model first and reboot.
http://www.nvidia.com/download/driverResults.aspx/9701/en-us
Then see if the latest Realtek driver works.
If you installed XP SP3, you shouldn't need the msuaa driver.
Accept the agreement, download and install the 4th item on the list (first one in green).
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

HP ENVY TS 15 Notebook PC: Problems installing audio driver

Hello all,
My product is the HP ENVY TS 15 Notebook PC.
Product number: E7Z34UA#ABA
OS: Windows 8.1 64-bit
A few days ago, I opened my laptop to find that there was no sound coming from the speakers at all. I was completely baffled because the audio was working perfectly fine before, even after upgrading to Windows 8.1. I have tried several solutions posted on other forums, such as installing other drivers, and uninstalling the IDT High Definition Audio Driver and then scanning for a hardware change. Now, however, when trying to update the IDT driver, it says that a device attatched to the system is not functioning. What do I do?
I have provided screenshots of things that appear when I try to fix this issue.
This question was solved.
View Solution.

Hello skyeisthelimit. I understand there is no sound produced by the notebook. Based on the description, I believe that the issue is software-based. However, I'm not going to eliminate faulty hardware from my mind. You have attempted some troubleshooting, which is great. I am going to provide some troubleshooting as well (certain steps you already completed). Please follow all troubleshooting in the order I suggest:
First, there is Microsoft Wizard Tutorial that troubleshoots sound issues in Windows 8.1. Please follow the wizard until it is finished. You can locate this wizard here: http://windows.microsoft.com/en-CA/windows/no-sound-help#no-sound=windows-8&v1h=win8tab1&v2h=win7tab...
Second, follow all of the troubleshooting, suggest in this HP document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03257712
Eventually, you will be asked to reinstall updated drivers. Please install this one: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&dlc=en&lc=en...
Assuming the issue is not resolved, the next step is to refresh Windows 8. This will force the computer to return to Windows 8. It will also clean up the computer, to a certain extent (it is not as powerful as a recovery). For more information on how to refresh Windows, please reference this Microsoft document: http://windows.microsoft.com/en-CA/windows-8/restore-refresh-reset-pc
If refreshing the operating system does not resolve the issue, reinstall the operating system is the next step. Ensure you backup all of your data beforehand.
For information on how to effectively backup your computer, please reference this document: http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03270359
For information on how to perform a system recovery, please reference this document: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03489643
Please respond with the results of your troubleshooting. I'm only here to help!
Mario
I worked on behalf of HP.

Cannot install audio driver because Microsoft bus driver should be installed

hello!
I have a satellite serie A laptop. When i try to install audio drivers it says "Microsoft bus driver should be loaded before installing Realtek High definition audio driver".
I've downloaded KB835221 and kb888111xpsp2 uplods and they should fix the problem, but they didn't. what should i do now?

Hello Jan
I presume you want to install your own operating system (probably WXP Pro) only thing you must do is to install all drivers and Toshiba designed stuff in right order. I dont know which notebook model you have exactly but check if you can find installations instructions document.
If you have newer unit A series be sure that WXP contains SP2.

Fail to install audio driver lenovo G550 6kg

Hello,
I accidently deleted my conexant audio driver and now unable to completely intalling it back...
I downloaded the driver from lenovo site,each time it fails to install at the "drivet installation wizard" and i'm unable to finish the setup.
My os is Win 7 32 bit' home pre

hi Bar,
Welcome to Lenovo Community Forums!
Can you Open Device Manager
          right click on my computer and choose Manage
                  On Manage window select Device Manager.
Look if you have a device that has a yellow mark or a question mark.
    right click on each and choose uninstall "Place a check on Delete driver software" if it ask. restart the computer.
Computer should be able to detect the Sound device Hardware and ask you again for the driver then install this
    Conexant Audio Driver
In still does not install Get its Hardware ID and post it back here thanks,
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

P4m900m3-l failed to install audio driver

i got this error when installing the driver
when i checked the Device manager
when i tried to uninstall the driver
what should i do?
I'm using winxp (it's my friend's pc actually)

From device manager:
Click on "system devices", search and select "Microsoft UAA driver", right click over it and "Disable it".
Reboot PC, and boot in "Safe Mode", go again to device manager and locate "Microsoft UAA driver", right click over it and "Un-install".
Select "Audio Device on High Definition Audio Bus" and un-install it too.
Reboot machine in normal mode and run Realtek driver installation again

Not able to install audio driver for 3000 G400

Hi,
I have reinstalled windows xp3 on my lenevo 3000 G400 but i am not able to find correct sound driver
though I have tried to install driver from www.lenovo.com as well as Driver CD which provided by lenovo. But
It doesn't help.......
Please help me to install sound driver for my note book ( 3000 G400 2048 22Q )
Thanks
Solved!
Go to Solution.

lionkinking_84,
I have read some other discussion threads in which customers have gone back to Win XP SP2, installed drivers, then updated to SP3 if they didn't install properly directly under SP3.
I would suggest using the search function from the forum home page and Searching on XP SP3 driver install or related terms.
Some of the other discussions may help.
In the meantime, I'll inquire and see if there are any recommendations to help you.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Re-installing Audio Driver

I recently purchased a new dynadock (model # - dynadock PA3927U-1PRP dynadock U3.0). During the setup, I received a notice that both the audio and Ethernet drivers had not installed. Obviously, my dynadock audio has not been working. I visited the Toshiba trouble shooting site and although it provided information on my current issues:
1. No Toshiba USB Display DriversThere entity in my "Program and Features"
2. Device Manager lists my dynadock with a yellow exclamation point
3. "Sound" in my Control Panel only shows one playback device
So while the site was helpful in identifying my problem, there is NO information on how to reinstall the audio drivers. Appreciate any help this board could provide. Thanks!

I too had many... many... problems with installing the dynadock software drivers. I started when I received a new Toshiba Tecra R940 laptop. I pulled the installed 7200 RPM drive and installed a solid state drive. This was not the issue, but it meant I needed to install windows from scratch, and there lied the problem. I had no preinstalled drivers and to hunt them down was a pain. Net... Net... Since I was not able to get all the Toshiba drivers installed successfully, combined with the already painful issues with the dynadock, I reinstalled the 7200 RPM hard drive with all the preloaded software. Once I did that I was close. The installation CD that came with the dynadock was a joke. I needed to reload the latest driver from Toshiba which did get the display and USB ports operational. Next I read this post and navigated to the link provided and installed dynadock LAN and Audio Drivers V2.6.1.1, making sure I OLNY checked the Network and Audio to install. As I already had the display drivers install at version diaplylink 7.1 I did not want to add to the problem. From windows 7 driver manager, I still noted the network and audio was highlighted in yellow (disabled). So I clicked on the Update Driver and had windows search by C:\ drive (root C:\ and not the web). Windows found a gigabit speed network driver and the audio, presumably from the earlier driver install. Once Windows installed these drivers, I re-booted and all is good. Maybe I'll tackle the solid state issue after I image my drive now that all is working.
Thank you for your help.
Helpful Links:
http://www.displaylink.com/support/downloads.php
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=328682...
http://www.mytoshiba.com.au/support/accessories/port-replicators/pa3575a-1prp/download
As a closing note: Toshiba Help Desk is worthless!!! When I did call (several times) I finally got someone that sounded like India support. I waited for about 45 minutes listening to music before a person finally picked up. He took my name, and I provided information on what the issue was. Next he set the phone down and all I could hear was this guy talking with his buddies (sounded like a party) and he "never" picked back up. After 15-20 minutes of this I hung up.

Failed to install audio driver for Kinect, Windows Embedded Standard 7

I am working on a project that uses the Kinect for Windows. However, the OS is Windows Embedded Standard 7 and it runs on Intel Atom N2600 processor (DE2i-150 board). The Kinect works well on Windows 7. When I migrated the code to WES7, the Kinect does not
work anymore. All Kinect driver were installed successfully, except for Audio. The board can 'see' the Kinect since it showed the little USB icon on the status bar. However, when I ran some test code from Developer Toolkit, they all said "Kinect is not
ready" status. I checked the power and reinstalled the SDK/drivers several time but had the same message.
Does anyone have any suggestion how to solve this problem?

I would first try a base install of Windows 7 on the same hardware. This will eliminate if it is a WES configurations of a missing component or the device hardware itself. Given that you are running a low powered system, this doesn't meet the minimum hardware
requirements, let alone the recommended:
Intel® Atom™ Processor N2600
(1M Cache, 1.6 GHz)
http://ark.intel.com/products/58916/
http://www.microsoft.com/en-us/kinectforwindows/purchase/sensor_setup.aspx
Dual-core 2.66-GHz or faster processor
Dedicated USB 2.0 bus

Problem Audio Driver couldn't install at all

Dear friend,
i have recently brand new lenovo laptop series G470, with Windows XP service pack 3,
but i'm having trouble in installing audio driver,which i have tried several times and still not worked,
does anyone here could give me some advices.
thanks
adj

Some Lenovo "driver install packages"
(the file you downloaded)
extract the files to C:\drivers\sound.. folder or similar.
Check if you have such a folder, and if so, run the Setup.exe
file within that folder.

G510 audio driver installation problem on Windows 8.1

I've just received my brand new Lenovo G510 and installed Windows 8.1 Pro 64-bit onto it.
Most of the drivers from the attached CD installed without any problems (though I was quite surprised that no newer versions were available on the Support wrbpage) but I can't install audio driver.
Apparently this series is equipped in either Conexant or Realtek audio chips and the provided setup application is desigend to detect the correct chip and run the appropriate driver installation program.
The problem is that setup is not working for me. All I receive is the notification "This utility can not be used on this machine". Since there are no "orphan" audio devices in the Device Manager, I can't really tell which audio chipset is installed in my machine. I don't want to install both dirvers as it may just cause confilcts.
How can I say which audio chipset is installed and install the correct driver?
Solved!
Go to Solution.

hi mikolajek,
Welcome to Lenovo Community Forums!
Under Device manager
You should look for your Audio
Normally it stays under Sound and gaming controller,
And if no driver is installed in shows as High Definition Audio
Right click on it and select Properties
Go to the Details TAB
change the Value to Hardware ID then check the details
ex. PCI\VEN_14E4&DEV_4727&SUBSYS_051014E4&REV_01
Get the 4 digit after VEN and DEV
Ven is the Vendor and Devi is the Device
Go to PCI database and do a search for the VEN
Then search for the DEV and youll know that device
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Assistance to install audio driver on my dv9000

Similar Messages

Maybe you are looking for