Assistance with Jetpack 4G MHS 291L and no connectivity issue

<< Duplicate post. Please see 4G LTE MHS29IL no internet but strong signal ? >>
Message was edited by: Verizon Moderator

As we have learned from other threads, the 890L cannot change its IP address.  That means that any device that connects to it must have an IP address of 192.168.1.x.  From the info you posted your Kodak printer is definitly not on the correct network because it is reporting a 192.168.15.x IP address.
My first suggestion would be to try re-entering your wireless password and network name (SSID) into the wireless printer.  There should be some kind of wireless setup wizard on your printer that will allow you to do this.  Some printers are extra picky and like to know the encryption type when you setup a wireless connection.  Your choices are either AES or TKIP, so try them both out and see if you can establish the connection.
If you are absolutely sure you have entered the correct wireless password into the printer then the next step would be to try changing the Network Mode from BGN down to BG.  From there you could also experiment with the password type such as lowering it from WPA2 down to WPA or WEP. 
See page 22 of the 890L User Guide for more information on basic WiFi settings:
http://www.zteusa.com/support/um/201205/P020120524834954274011.pdf
See page 24 of the 890L User Guide for more information on WiFi passwords:
http://www.zteusa.com/support/um/201205/P020120524834954274011.pdf

Similar Messages

  • My Jetpack VZ Jetpack 4G MHS 291L has been in "PDL Downloading" mode for three hours or more - when will this end?

    I am a med student, and I use the jetpack both to study and in the course of doing rounds on patients.  I cannot connect to it while this is going on, and any information or help would be greatly appreciated.

        JPC500,
    I know how important your jetpack service can be.  Let's get your device back up and running.  Have you tried to restart or pull the battery of the jetpack?  You may also consider performing a hard reset;
    http://www.verizonwireless.com/support/devices/knowledge_base.html/73945/
    Let us know if this fixes it!
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Problems with Remote app on iphone and Mac connection

    Hi,
    I am using iTunes 10.4.1, and am trying to use the remote app on my iphone to control my itunes with it. I was able to connect previously, before I upgraded to Lion OS, before upgrading to the latest versions of iTunes and my iPhone as well. But now, the connection is just dead.
    I tried to re-add my iTunes onto my iphone again, but I couldn't find this box to check in my iTunes under Preferences > Devices -
    "Look for iPod touch, iPhone and iPad Remotes"
    Someone please advice me?
    Thanks.

    Chenks wrote:
    maybe for you, but isn't for me.
    i have the remote app on my iphone4 and it's connected to 2 appletv's.
    i don't experience any dropping of connection etc.
    May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
    http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
    bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
    At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow?

  • Iphone 6 with iOS 8.1.1 and still wifi issues

    I have Cox internet service with Netgear 2.4 router at home.  Have been having issues with my 2 iphone 6 wifi staying connected, even after two updates.  Very disappointed that with 8.1.1 the problem was not fixed.  Wifi stays on for a few seconds to a minute, then drops off.  Sometimes it re-connects.  Sometimes I'd have to enter my wifi password several times.  I have two iphone 5 and ipad air and macbook air also, and none of them have had wifi problem in the past.
    tried everything recommended here and elsewhere (resetting, turning off bluetooth, turning off wifi-networking in privacy/location services, re-boots).  Nothing works.  Was really hoping 8.1.1 would fix it, but it did not.
    Interestingly, wifi seems to stay better connected when I'm at work (still drops occasionally, but reconnects fairly quickly).
    Any suggestion would be appreciated.  This is the worst, persisting wifi problem I've had in the last 10 plus years using Apple products, and the problem does not seem to be getting solved anytime soon!!

    OOPS! Too quick on the trigger to ask that question without trying anything. Sorry. Solved it by touching the bookmark icon.

  • Bought iPhone 6 yesterday. Also bought dock works with iPhone 5/5s. And cord connecting iPhone 6 to USB port on car stereo. No sound comes out of dock or car stereo. In store today, iPhone 5 running ios 8 worked on dock, not iPhone 6. When Apple fix?

    I bought an iPhone 6 yesterday. I also bought a stereo dock that works with iPhone 5/5s. And a cord to connect iPhone 6 to USB port on my car stereo. No sound comes out of the stereo dock or car stereo. In Best Buy today, Sales Associate tried his iPhone 5 running iOS 8 on a stereo dock. It worked, but my iPhone 6 didn't. When will Apple fix this problem? Or is Apple pushing everyone to Bluetooth?

    The iPod feature that plays through USB in my car does not work with my iPhone 6 either.  I called AppleCare and they said that the car audio system will need a firmware update.  Don't know if Apple is just passing the buck, but that is what I was told.  Thank you for posting.  I know now that I am not the only one.  Thanks also for posting about the iPhone 5 running iOS 8.  I gave away my iPhone 5 to a friend so I wasn't sure whether this is an iOS 8 issue or an iPhone 6 issue and your experience seems to confirm that it is a problem with iPhone 6.  I guess I will just be using Bluetooth in my car, at least for now.

  • "Register with ESB" failing, though AS and IS connections are tested and OK

    When trying to deploy my ESB project, in the "Register with ESB" phase I am now all of a sudden getting the following Error (the same project was working fine for months unchanged until today). This is even though the AS and IS connections are tested and still working fine.
    Things that changed today:
    1.Change 1 – when starting JDEV I was prompted to download some Jdev patch/upgrade for some sort of new BPEL modeling framework, so I installed, JDEV asked to reboot so did, JDEV asked to upgrade JDEV from former, so did, JDEV asked for what dir, so went with default .../jdev/system
    2. Change 2: tried also to deploy the standard “Order booking SOA demo” after patching.
    3. The Error message I started getting, both for new and old deployments (that were working fine until today), is below, as is my version information:
    Entity Deployment Failed
    error code: 1000 : 5
    summary: -
    Fix: Contact Oracle Support
    Version:
    ADF Business Components     10.1.3.39.78
    BPEL Designer     10.1.3.1.0 (Build 061009.0802)
    CVS Version     Internal to Oracle JDeveloper (client-only)
    Java™ Platform     1.5.0_06
    Oracle IDE     10.1.3.39.78
    Struts Modeler Version     10.1.3.39.78
    UML Modelers Version     10.1.3.39.78
    Versioning Support     10.1.3.39.78
    Ideas why the "Register with ESB" stopped working even though the AS and IS connections are tested and still working fine?

    maybe this link can help you
    "error code: 0 : 10" when Deploying ESB Project

  • Database link and remote connection issues..

    We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
    My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
    So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
    Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
    The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
    Here are some of the errror message we get in our script...
    ORA-03114: not connected to ORACLE
    ERROR at line 1:
    ORA-02068: following severe error from DMVAIS
    ORA-03135: connection lost contact
    Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
    Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

    What version of Oracle?
    What are the values of the following database parameters?
    open_links                       max # open links per session
    open_links_per_instance    # open links per instanceAny chance you are exhausting one or both these parameter values?
    Have you ran a check on the network connection between the two machines?
    HTH -- Mark D Powell --

  • OSX and XP connection issue

    I have Airport Express connected to a Broadband Modem, a HP Laptop with XP Service Pac 2 and a PowerBook with OsX 10.3.9.
    The Mac can see the PC on the network but cannot connect. The PC can see and connect to the Mac. When I try to connect to the server, OsX gives me the following error message, "The alias xxxx (HP Laptop) could not be opened because the original item cannot be found".
    Both the Mac and PC can connect to the Internet via Airport Express. And both computers can utilise Airtunes, and share iTunes Libraries.
    Both have self-assigned IP addresses, Airport Admin does does not distribute IP addresses (if that's any help).

    Sorted it. XP service pac 2 was not installed correctly. It was a Windows problem... of course.
    Now it all works

  • App Controller and SCVMM connection issue

    I have configured private cloud and installed the SCVMM server and App Controller Server separately.
    When I am trying to add the VMM server to App Controller,
    I am getting the following error.
    Category: Critical
    Description: Connection attempt to the target system failed.
    Details: Category: Critical
    Message: 1604–ConnectServerAuthenticationFailed
    Description: You cannot access VMM management server scvmm.corp.usl.in.
    Details: Category: Critical
    Message: System.ServiceModel.Security.SecurityNegotiationException
    Description: A call to SSPI failed, see inner exception.
    Category: Critical
    Message: System.Security.Authentication.AuthenticationException
    Description: A call to SSPI failed, see inner exception.
    Category: Critical
    Message: System.ComponentModel.Win32Exception
    Description: The target principal name is incorrect
    Regards
    FBM

    Hi,
    I am configuring a private cloud. I have installed the SCVMM server and App Controller Server separately.
    When I am trying to add the VMM server to App Controller, I am getting the following error.
    Category: Critical
    Description: Connection attempt to the target system failed.
    Details: Category: Critical
    Message: 1604–ConnectServerAuthenticationFailed
    Description: You cannot access VMM management server scvmm.corp.usl.in.
    Details: Category: Critical
    Message: System.ServiceModel.Security.SecurityNegotiationException
    Description: A call to SSPI failed, see inner exception.
    Category: Critical
    Message: System.Security.Authentication.AuthenticationException
    Description: A call to SSPI failed, see inner exception.
    Category: Critical
    Message: System.ComponentModel.Win32Exception
    Description: The target principal name is incorrect
    Thanks and Regards, Mukesh. This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. Please VOTE as HELPFUL if the post helps you and remember to click “Mark as Answer” on the post that helps you, and to click
    “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Download and iTunes connection issues

    As of recently, I have purchased numerous audio and video files from the iTunes store with no difficulty or connection issues of any kind. Though today, I attempted to download the Iron Maiden: Flight 666 movie, and had issues with my download. Though the file is downloading, it is taking an excruciatingly long amount of time. A 3.09 Gigabyte file, a file which might have previously taken me about an hour to download on my connection, now displays an estimated download time of 17+ hours. It has been downloading now for at least an hour, and only 9.5 Megabytes have been successfully downloaded. Now, I am experiencing difficulty accessing the iTunes store at all. An error message continually pops up saying that my connection has been lost and the download pauses, though I have checked my connection time and time again. I have even contacted my internet provider, Comcast, in hopes of solving my problem. My connection is good, though iTunes itself is the only thing giving me difficulty. I have gone through all of the steps that Apple has recommended, and have not had any success in attempting to download the file. Any help would be greatly appreciated.

    Contact iTunes support.

  • BT Infinity and https connection issues

    I have sporadic issues with https connections on my BT Infinity service.
    I used to be on Virgin ADSL and had no issues.
    I can also use a Orange mobile dongle with no issues if I switch to that when experiencing problems with BT.
    Some example sites:
    Dixons checkout pages
    NatWest banking pages
    Anyone else experience this?
    Should I periodically reboot the HomeHub and VDSL?
    Cheers,
    Jason.

    Can someone on Infinity kindly do me a test and visit https://upgrades.o2.co.uk/index.htm and tell me if it's darn slow for you too?  It's not the site as I'm loading up VNC and connecting to a VPS in America and it's instantly loading. It'll definitely rule out traffic shaping if someone on Infinity can tell me either way.
    Thanks you generous souls!!!

  • Bluetooth And USB Connectivity Issues

    I am having issues with both my bluetooth mouse and keyboard staying connected and or dicovered. Also, peripherals connected via usb are also dropping offline randomly. Any thoughts?
    Thanks
    Joe

    When you next have the problem, note the exact time: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • WAP2000 and iPhone connectivity issues?

    I have several WAP2000 (Firmware 2.0.0.5), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.
    Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.
    I have tried changing channels, eliminating all but one of the AP's, and so forth.
    Has anyone else had issues with this firmware?  I see posts where people are saying their iPhones connect up fine.  This happens on versions 3.x and 4.x of the iphone O.S.  It's not limited to one iphone or ipod touch; we've tried several.
    If anyone else is running 2.0.0.5 of the firmware and they are having success with an iphone, can you please tell me your settings?
    Thanks in advance!
    --Greg

    Greg,
    I think I have the same problem but with a Blackberry Storm 2.  (I posted in the last two days--Look for WAP2000 and Storm 2)  I see the Storm 2 connect successfully to the WAP2000 but then never establish a connection to the Blackberry Enterprise Server (BES)...Necessary to do anything useful with a Blackberry device.  A few months aga (Before I had my Storm 2) I had borrowed an iPhone for a week.  During that time I tried to use my WiFi but it never seemed to work (ie Established a WiFi link but then couldn't do anything else with it.).  Since I didn't have it long and WiFi wasn't the object of my testing I ignored the problem.  Now troubleshooting my Storm 2 problem and realizing that other WiFi devices on my network have been experiencing issues (the Storm 2 appears to have been most impacted) it is very likely that the iPhone I borrowed was experiencing the same problem.
    You can read my previous post but a quick summary--> When I used a packet analyzer (Wireshark) I saw that my router was issuing ARP address discovery broadcasts to the Storm 2's IP address but the Storm 2 was not responding.  I had tested the same setup with a different wireless access point (Linksys WAP54G) and saw the Storm 2 properly respond (and the Storm 2 worked perfectly when connected to the WAP54G).  I concluded that the WAP2000 was either not forwarding the ARP broadcast to the Storm 2 or it was not forwarding the Storm 2's response back to the LAN.
    I created a work around the now allows my Storm 2 (and multiple other devices) to function successfully on the network.  I have a Cisco ASA5505 firewall that has a ststic ARP table and is capable or proxy-arp (ie.  It can respond to ARP requests on behalf of devices on the network).  I simply created an entry for my Storm 2 and now it functions properly.  I also had a laptop and an IP security camera that had intermittent connectivity issues.  When I added static ARP entries for these items their problems disappeared as well.
    I don't think this is a settings issues so I am hoping Cisco confirms this as a bug and issues a firmware update.
    I hope this helps.
    --Gerhard Wittreich

  • FMS3 and FCS Connectivity Issue

    When FCS and FMS3 connection takes place, i get following
    error in FCS's Machine regarding the FCS crash.
    "Macromedia Flash Comminication Server MX 1.7.1 r98 has
    encountered a problem and needs to close. We are sorry for the
    inconvenience.
    Error signature
    szAppName : FlashCom.exe szAppVer : 1.7.1.98 szModName :
    js32.dll szModVer : 0.0.0.0 offset : 000033c1"

    This is just a guess as I'm not a Transall user. My first guess is that your DSN will need to be made using the 32-bit ODBC driver. As a default, using Windows 7 or later, you created a 64-bit source.
    To create or modify a 32-bit DSN on 64-bit Windows, you must run C:\WINDOWS\SysWOW64\odbcad32.exe. You may find it useful to create a shortcut to this on your desktop or Start menu if you access it frequently. I believe the interface is exactly the same after that.

  • Newb deserving assistance with Adobe Javascript (check boxes and combo boxes)

    Hi, I'm a newb when it comes to javascript (using adobe acrobat pro 6.0).
    I am working on a form that will allow me to autofill checkboxes based off of information chosen. Ideally, I would like to have a selection from a combo box autofill/auto checkmark check boxes. Alternatively, I would be willing to just have different selections presented with check boxes that when filled, would auto checkmark other check boxes (I know how to do this one, but I am not sure how to clear the check boxes if the initial one is unchecked).
    I have the action button tied to the mouse up function. This just errors out.
    var Citrix = this.getField("Citrix")
    var Appro = this.getField("Appro")
    var SAS = this.getField("SAS")
    if (event.target.value=="Yes") {
    Citrix.checkThisBox = true
    Appro.checkThisBox = true
    SAS.checkThisBox = true
    else {
    Citrix.checkThisBox = false
    Appro.checkThisBox = false
    SAS.checkThisBox = false
    I have this that works, but I don't know how to clear the buttons when "Associate" is unchecked.
    if(this.getField("Associate").isBoxChecked(0));
    this.getField("Citrix").checkThisBox(0, true);
    this.getField("Appro").checkThisBox(0, true);
    this.getField("SAS").checkThisBox(0, true);
    The other way I was working on it, was to use a combo box to autofill/checkmark check boxes. But this code doesn't work either.
    function calculateTextField()
    // get the value of the combo box
    var comboValue = this.getField("Select").value;
    // get the state of the checkbox
    var isChecked = (this.getField("Citrix").value == "Yes");
    var textFieldValue = "";
    console.println(comboValue);
    if (isChecked)
    if (comboValue == 0)
    textFieldValue = "";
    if (comboValue == "Associate")
    (this.getField("Citrix").value == "Yes");
    else if (comboValue == "Specialist")
    (this.getField("Citrix").value == "Yes");
    else if (comboValue == "Team Leader")
    (this.getField("Citrix").value == "No");
    else
    (this.getField("Citrix").value == "No");
    else
    textFieldValue = "";
    this.getField("Select").value = textFieldValue;
    Can anyone please assist me with this?
    Thanks,
    Chris

    Hi Gene,
    Thank you for the response. Are you saying that my initial formula should look more like this; ?
    var Citrix = this.getField("Citrix")
    var Appro = this.getField("Appro")
    var SAS = this.getField("SAS")
    if (event.target.value=="Yes") {
    Citrix.checkThisBox = true
    Appro.checkThisBox = true
    SAS.checkThisBox = true
    else {
    if (event.target.value=="Off")
    Citrix.checkThisBox = true
    Appro.checkThisBox = true
    SAS.checkThisBox = true
    Thanks,
    Chris

Maybe you are looking for