Assistant NET8 and DBCA won't start after installation HELP

HEllo,
I've installed oracle 9.01 and later on 8.1.7 i cannot use the assistants net 8 and dbca after installation. Does anybody have the same problem. I think is has something to do with jre versions.
I alse got the same problem when i installed db9.0 and oracle appserver 1.2.2.2 on the same machine. SOme config assistant won't start after install.
ALready tnx.
Francus

Hello, yogendra k saini
I'd installed oracle90 and 1.2.2 in different oracle homes. There was no error message. When i pressed the icon. Nothing happens.
Yesterday i installed also a 8.1.7 database on the same machine as the 9.0.1.4 database. After a reinstallation of appserv 1.2.2a everything seems to work fine.
but it is still a mystery for me why, because when i only install a 9.0.1.4 database and appserv 1.2.2.2 something goes wrong. Maybe APpserv 1.2.2. doesn't work fine with 9.0 database. That's not exactly true because i used appserv 1.2.2 for forms en reports...
gr.
Francus

Similar Messages

My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. Help please.

My mac book keep on beeping and make the beep sound 3 time (same goes to the light) and it won't start up. What should i do?

If you recently installed new ram, make sure it is seated properly.
If that doesn't work try removing one stick at a time to see if one is dead or put original ram back in.

GRUB won't start after installation. Boots direktly to Windows 7

Hello,
I am having a hard time installing Arch next to Windows 7 on an UEFI Notebook.
The partitions of the HDD (GPT) looks like this:
sda1 Boot partition, fat32, 400 MiB. Mounted as GRUB Wiki says at /boot/efi
sda2 swap
sda3 Arch
sda4 Windows 7
First I install Windows 7 which workes without problems.
After that is done I start installing Arch. All goes well without any errors till the end.
For installing GRUB I use
grub-install --target=x86_64-efi --efi-directory=/boot/efi --bootloader-id=arch_grub --recheck
and
grub-mkconfig -o /boot/grub/grub.cfg
Both finish without errors.
First problem is os-prober never mangaged to find Windows 7 by itself. Not once in 6 installation retries.
Second problem. After I finished installtation and rebooting, GRUB doesn't show. It direktly starts to boot Windows.
I'm following the Beginners Installation Guide step by step (except the GRUB part). What am I doing wrong?
Are the Mountpoints wrong?
I don't know which config files you need to help.
Last edited by Peikko (2013-08-13 11:08:55)

It did change but only for this session. After a reboot, the order was reset again.
But this is not the problem anymore.
I have found the solution for this problem here: http://www.jsravn.com/2013/06/26/thinkp … -arch.html
The only problem that still exists is that os-prober is not able to detect the existing Windows 7 partition and add it to the GRUB menu.

Desktop v6 won't start after installation

I performed a clean install BB Desktop Software v6, after uninstalling version 5, then rebooting then installing version 6 then rebooting again.
Now, every time i click on the desktop icon or the icon to start the app (even from the Start Menu), i can see from 'talk manager', that the app started, it stays for a few seconds then it auto closes. Every single time.
Has anyone come across anything like this?
Nothing remotely similar to his ever happened to version 5 of the desktop client.
My PC info:
Windows XP PRO SP3
Intel Core2 Duo / 3 GB RAM
User does have 'administrative' rights

Hey zxo2000,
Welcome to the BlackBerry Support Community Forums.
Do you have any additional users created on this PC? If so, if you login to that user account does Desktop Manager close down after a few seconds?
Also what security software is currently installed on the computer?
I would first suggest performing a clean uninstall of the BlackBerry Desktop Software, which requires going into the registry.
The steps are located at www.blackberry.com/btsc/KB02206
Once completed, disable start-up items under msconfig and then re-install BlackBerry Desktop Software.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

ITunes won't start after installation, get error "iTunes has encountered.."

I've been reading up on this a bit in the forums, but I can't seem to find a definitive answer to fix this problem. Just today, I tried to install iTunes to my month-old computer. Installation seemed to go fine. However, now when I click on "iTunes" my computer goes immediately to:
iTunes has encountered a problem and needs to close. We are sorry for the inconvenience.
I tried the MSConfig thing and that didn't do anything. I tried uninstalling and reinstalling and that didn't work, either.
What I find weird is that after uninstalling, I try to install QuickTime all by itself, and the computer informs me there is already a version installed, but I never did and it does not show up under "control pannel, add or remove programs."
If this helps, I copied this from the windows error:
AppName: itunes.exe AppVer: 7.0.2.16 ModName: unknown
ModVer: 0.0.0.0 Offset: 10001040
I don't understand why this is happening, as this is a new computer, and I am the only user. This is XP Media Center Edition 2005
Please help! I can provide whatever info is necessary for help!
HP Windows XP

Read elsewhere of two files that needed to be removed in C:\windows\system32 in order for Quicktime to reinstall successfully. Upon doing so, I was then able to install iTunes. Seems to be working now!

ITunes won't start after upgrade-HELP!

I tried upgrading to the latest iTunes on my windows xp and nothing seemed to go wrong. everything installed correctly. Quicktime opens and operates perfectly, but iTunes will not open at all!
I have tried various different uninstall-reinstall combinations, including older versions. nothing works at this point!
HELP!

Same thing has happened to me apart from my itunes has been wiped from the computer, the only thing you can do is reset your computer to a a few days before you tried to upgrade. your itunes will come back on plus all your music but you can't upgrade to 7.7 or it will disappear again. Very annoying and time consuming, Apple need to sort this out.

Iphoto won't start after installation from dvd

Hi.
I installed iphoto 11 from the DVD.
Then, before running it for the first time, I used software update to check for latest updates. I installed them.
Finally I run iPhoto. A window appears telling that if I want to run iPhoto i must install latest version upgrade.
I run software update again but it finds nothing!
What can I do?
Regards
Alberto

Download and apply the iPhoto 9.1 updater and then the 9.3 updater. If that doesn't work delete the application and reinstall it and then go the 9.1 and 9.3 route.
OT

Lightroom CC 2015 won't start after installation

I just downloaded the upgrade for Lr 2015. Everything went well, and a new icon appeared on my desktop.
But, when I click on the icon, nothing happens.

Just for clarification, did you actually go to preferences and click on the sign out button, or did you just click on quit? Clicking on quit will not work. You actually have to sign out. I don't mean to be so elementary, but some have misunderstood this.

Firefox won't start after an update. Firefox help says check virtualization settings. What is virtualization settings and where do you check them and for what? I have Windows XP

Firefox won't start after downloading update. I've reinstalled Firefox, still won't start. Help says check virtualization settings. What and where are virtualization settings? I have Windows XP.

This might be Zone Alarm since it provides virtualization. Please try the instructions to turn off virtualization in the following support question
http://support.mozilla.com/en-US/questions/880170

Portege R830 - Windows won't start after I install Comodo Firewall

Good afternoon,
I purchased today a Portege R830, and after the Windows configuration was over, the first program I installed was the popular free firewall Comodo. After I rebooted, Windows 7 wouldn't start anymore. It would get stuck on the user login screen and I know it's a problem with the firewall because if I make a system restore to the restore point created by the firewall installer, the windows will start again.
So I ask if there is any incompability between the firewall and some software on the Toshiba. Has anyone ever had this problem? I've been trying to solve this issue all day long with no results. I even re-installed Windows 7 using the Toshiba recovery and the issue persists. I really love Comodo, and I want this firewall on my laptop, but Windows just won't start!
Any help would be very apreciated.

Hi jillefsky,
Have you disabled the Windows firewall before you started with Comodo firewall installation? As far as I know Portege R830 is delivered with preinstalled McAfee security software and you should remove this program before you install any other security tools.
Generally speaking this issue has nothing to do with Toshiba and its recommendable to contact Comodo directly. Maybe they know about this issue so they can give you a proper answer.
But I dont understand why this program is so important for you. Windows has already an internal firewall so such programs are not necessary in my opinion. Just install a good antivirus program like AntiVir and activate automatic Windows updates. Thats all!

HT4061 my iphone dose not start it was stuck in restoring mode then it shut down and it won't start what shall i do

my iphone dose not start it was stuck in restoring mode then it shut down and it won't start what shall i do

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

C3-01 won't start after charging

I'm so angry right now but I will try and be cool about this!
I bought C3-01 mobile phone about four months ago and it is already causing me problems.
The mobile phone simply won’t start after charging. Last time i charged it, it miraculously came to life only, and only after annoying me for about hour and a half. Now I fear it is completely dead!
Battery was not completely empty so the phone should still start even if the wall socket is broken. Which is not, wall socket works perfectly.
Nothing helps! I tried removing the battery and then restart. Removing the battery then removing the sim card, memory card and that piece of “advanced technology” simply won’t start!
I didn’t buy my new phone so that I can use my old Motorola mobile, which btw., still works after 4 years of intense usage.
I will never buy Nokia again!

Hi,
Sorry to hear that your phone is not starting after charging.
I would suggest one more thing, which maybe helps. If you have another battery, please try.
If not, i would recommend to visit Nokia Care Point in your area.
To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
Br
Mahayv

Mac Mini won't start after installing OS X 10.6.3

My Mac Mini won't start after installing Mac OS X Snow Leopard 10.6.3. When I turn it on, the Apple logo appears and the initialization line starts to fill, but it suddenly stops. It does that again and stops at the same point, but this time it shuts down. What should I do?

If you are coming from 10.5.8, hopefully you backed up your important data first. Your mini will need at minimum, 1 GB of RAM to install Snow Leopard and at least 5 GB of storage remaining on your boot drive.
I treat 10.6.3 as a fresh, full install over a 10.5.8 system. That means I choose Disk Utility from the Installer's menu and repartition the boot drive as a single partition, Mac OS X Extended (Journaled) format, and use the GUID partition scheme from the options button. At this point, while still in Disk Utility, I would verify the drive under First Aid.
Then I turn the installer loose, and reboot into a working 10.6.3 system, ready for the software updates that take the machine to 10.6.8.
So, following the above guidelines, reinstall 10.6.3.

HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon

HI I have a problem with my Firefox, recently my fire fox won't start after I click on its Icon, when I see the process in task manager Firefox is there but after a second it will end processing automatically, I have tried ff7 and ff6 and have the same problem, even re installing the Firefox doesn't fix the problem, any one know the reason? I'm using a win7 64bit, and bitdefender internet security

Hi All,
This is not a virus . I used this website & I found it very useful & you can remove it through the following steps.ar.hao123.com 1- Then right-clicking on the icon Mozilla Firefox on the desktop, then choose "Properties", as shown in the picture: 2- Select Tab "shortcut", and then delete the text after. Exe in "target" as shown in the following picture, then press "Ok" 3- Open Firefox, and then choose "options" from the list of "tools" 4- Select the tab "general", and in the list "when Firefox starts" then select "show my homepage" and in the box "homepage" then enter any other link and then press "OK"
you can visit [http://ar.hao123.com/report/ar-feedback.html Hao123] hao123
ar.hao123.com

Firefox won't start after update - nothing in support pages helps

windows 7 - firefox won't start after update - no support pages are relevant

-> [[Firefox will not start]]
Check and tell if its working.

Assistant NET8 and DBCA won't start after installation HELP

Similar Messages

Maybe you are looking for