Associate ed2k protocol to program (eMule or aMule etc. )

Hello to the to the Firefox team ,
When one click a eMule or aMule (P2P) link , there is no
option to associate it with /usr/bin/ed2k (the P2P program) .
In former versions you had to go in "about:config" and enter a New then Boolean with as name :
"network.protocol-handler.external.ed2k" and value :
"true"
Then again New String "network.protocol-handler.app.ed2k"
with "/path/to/ed2k" as a value .
I have Firefox 3.6.7 on a Fedora 13 O.S. and the classic
doesn't do the trick . How comes ?
Now I get a warning window witch basically says :
(translated & abbreviated from Dutch)
" don't now how to open this address , this protocol (ed2k)
isn't associated with any program "
Only option is the OK button , end of history , no way to
associate , as explained in MIME types etc.. ...
I've no idea , and there seams to be nobody else having
the problem , there isn't anything in the FAQ's or the
knowledge base .
Thank you for the attention ,
Sincerely greeted
Martin

You're welcome

Similar Messages

How to associate ed2k protocol with emule downloader?

when clicking on an ed2k link in FF7 Alert pops up
" Firefox doesn't know how to open this address, because the protocol (ed2k) isn't associated with any program"

found out this is not FF problem. it is done in the emule client itself.

Where do I execute the command in order to associate a protocol to an apllication?

I need to associate a protocol ( shh) to an application ( putty).
I found a knowledge base article that shows me the commands that I have to execute in order to do so, but it does not tell me where to do it from.
so I need to know where to execute the following command:
javascript:navigator.registerProtocolHandler('ssh','http://support.mozilla.com/value=%s','putty');
I found this on the knowledge base article at:
http://support.mozilla.com/en-US/kb/The+protocol+is+not+associated+with+any+program#Associate_the_protocol_with_a_program_in_Firefox

On the Windows platform an application needs to create the correct registry keys to register a protocol. Then Firefox will find it via a registry scan. The other methods are for registering a protocol on other platforms like Linux and Mac.
See http://kb.mozillazine.org/Register_protocol

How I can associate shh protocol to putty in firefox or windows?

How I can associate ssh protocol to putty in firefox or windows?
== This happened ==
Every time Firefox opened

Check this link out:
http://schipka.com/archives/34

To update the Associate node from se38 program

Hi Expert,
I am trying to update the bobf root node and associate node under it.
This is BOBF EHFND_DATA_AMOUNT custom enhanced z_***** , i can able to update the root node but for associate node created after enhancement its not updating.
Code i used is
           APPEND INITIAL LINE TO lt_mod ASSIGNING <ls_mod>.
          <ls_mod>-node        = if_ehs_ih_ehfnd_data_am_c=>SC_NODE-/SDR/EHS_IH_AMNPPE_ITEM.
*          /sdr/if_ehs_ih_ehfnd_data_am_c=>sc_association-root-ehs_ih_amnppe_item.
          <ls_mod>-change_mode = /bobf/if_frw_c=>SC_MODIFY_CREATE.
          <ls_mod>-key         = lr_s_amnppe_item->key.
          <ls_mod>-data        = lr_s_amnppe_item.
          <ls_mod>-association = /IF_EHS_IH_EHFND_DATA_AM_C=>SC_ASSOCIATION-/SDR/EHS_IH_AMNPPE_ITEM-/SDR/EHS_IH_AMNPPE_ITEM.
          <ls_mod>-source_node = if_ehfnd_amn_c=>SC_NODE-ROOT.
          <ls_mod>-source_key = lv_key.
          <ls_mod>-root_key    = lv_key.
*      Create the Amount record:
      CALL METHOD lo_driver->mo_svc_mngr->modify
        EXPORTING
          it_modification = lt_mod
        IMPORTING
          eo_change       = lo_change
          eo_message      = lo_message.
            "Check for errors:
      IF lo_message IS BOUND.
        IF lo_message->check( ) EQ abap_true.
          lo_driver->display_messages( lo_message ).
          RETURN.
        ENDIF.
      ENDIF.
      "Apply the transactional changes:
      CALL METHOD lo_driver->mo_txn_mngr->save
        IMPORTING
          eo_message = lo_message
          ev_rejected = lv_rejected.
      IF lv_rejected EQ abap_true.
        lo_driver->display_messages( lo_message ).
        RETURN.
      ENDIF.
but the above code is not helping to update the associate node from se38 program.
Regards
Sasikumar S
Can anybody help me on that thanks in advance.

Hi Sasi,
According to what you have written above, You want to update a Z node under a root node.
But in the coding for association you have written a standard node.
Give the name of the Z interface which is created and in that you will have the 'Z' custom created node.
Try this.
ls_mod>-association = "Z Interface"=>SC_ASSOCIATION-"root_node"-znode.
Hope this helps you.
Regards,
Sanket Vaity.

How to take backup of an entire module pool program with code,screen,etc.

Hi experts,
I have some important data in the ides server for which i want to take backup of them.
I have some question regarding the same.
1.How to take backup/download of an entire module pool program with code,screen,etc.
2.How can we take backup/download for a DB table with its structure?
3.How can we take backup of a search help?
Please give some suggestions abt the same.
Regards,
Ashesh.

Hi,
May be just for viewing, try downloading from SE80 transaction from the others option.
Here just try issuing the print, it will generate the spool.
Now using the spool, download to your desktop as required. It will have all the information regarding the attributes, fields, elements everything.
The only issue is, may be you need to take all the screens separately.
Regards,
Santhosh.

How do I associate a protocol with a program?

I want to associate the 'cel' protocol with celestia so I can open cel:// urls but i'm not sure how to do it.

Opera:
Tools -> Preferences -> Advanced -> Programs and clicking "Add". Enter "cel" in the protocol field and enter "celestia" in the "Open with other application" field.
Repeat one more time with cel+http as the protocol.
Firefox:
Create a .js file in /usr/lib/xulrunner-1.9.1/defaults/pref.
celestia.js:
pref("network.protocol-handler.app.cel","/usr/bin/celestial");
pref("network.protocol-handler.warn-external.cel",false);
pref("network.protocol-handler.app.cel+http","/usr/bin/celestia");
pref("network.protocol-handler.warn-external.cel+http",false);
Or add the lines to ~/.mozilla/firefox/<whatever>.default/prefs.js

Associate Print Parameters with Program Variant

Is there any standard way to associate a particular set of print parameters with a program variant?

i think it is possible ? try to make use of
<b>
Selection Variables
    The following three types of selection variables are currently
    supported:
    o   Table variables from TVARVC
        You should use these variables if you want to store static
        information. TVARVC variables are proposed by default.
    o   Dynamic date calculations:
        To use these variables, the corresponding selection field must have
        type 'D' (date). If the system has to convert from type T to type D
        when you select the selection variables, the VARIABLE NAME field is
        no longer ready for input. Instead, you can only set values using
        the input help.
        The system currently supports the following dynamic date
        calculations:
        Today's date
         From beginning of the month to today
         Today's date +/- x days
         First quarter ????
         Second quarter ????
         Third quarter ????
         Fourth quarter ????
         Today's date - xxx, today's date + yyy
         Previous month
     o   User-specific variables
         Prerequisite: The selection field must have been defined in the
         program using the MEMORY ID pid addition. User-specific values,
         which can be created either from the selection screen or from the
         user maintenance transaction, are placed in the corresponding
         selection fields when the user runs the program.
     The SELECTION OPTIONS button is only supported for date variables that
     fill select-options fields with single values.
</b>
but thing is u have to maintain para/selection options for ur report.
Regards
Prabhu

How do I associate a protocol with Firefox?

I can log in to Second Life but can't get to my location. It tells me that this application doesn't have a Firefox protocol.
== URL of affected sites ==
http://http://maps.secondlife.com/index.php?q=http%3A%2F%2Fmaps.secondlife.com%2Fsecondlife%2Fchez%2520chr&s=Places

Try Installing SL viewer - Emerald doesn't recognize without SL viewer first being installed.. then go to your tools option and assoiate Second life with Emerald in the drop down box to the right- then it should work just fine. Hope this helps

Xmonad - Can't start any terminal emulator (xterm,urxvt,etc)

Hi,
I've recently installed Arch Linux in Virtualbox-OSE and also installed xmonad. It took me a while to get it running. It is all working fine and I can start all kinds of applications with MOD+Shift+P, but the only thing I can't do is start a terminal emulator such as xterm or urxvt. Neither with MOD+Shift+P and MOD+Shift+Return. When I do this I see a window flashing and I think it is the program I am trying to start but it is closing right after the startup.
Does anybody recognize this problem or know how to fix it?
Thanks,
Webfp

lifeafter2am wrote:Please post your xmoand.hs file and your xorg log.
my xmonad.hs
import XMonad
import XMonad.Util.Replace
import XMonad.Hooks.EwmhDesktops
main = xmonad $ ewmh defaultConfig
{ terminal = "urxvt"
, modMask = mod4Mask
, borderWidth = 0
xorg log
[ 174.789]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 174.790] X Protocol Version 11, Revision 0
[ 174.791] Build Operating System: Linux 3.1.5-1-ARCH i686
[ 174.791] Current Operating System: Linux Laptop-Frank 3.1.8-1-ARCH #1 SMP PREEMPT Sat Jan 7 08:03:08 UTC 2012 i686
[ 174.792] Kernel command line: root=/dev/disk/by-uuid/1b11e5e6-5760-4dbb-9d54-0c982c0a37a4 ro
[ 174.794] Build Date: 17 December 2011 09:38:27AM
[ 174.794]
[ 174.795] Current version of pixman: 0.24.0
[ 174.795] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 174.796] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 174.801] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 11 16:17:09 2012
[ 174.883] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 174.928] (==) No Layout section. Using the first Screen section.
[ 174.928] (==) No screen section available. Using defaults.
[ 174.928] (**) |-->Screen "Default Screen Section" (0)
[ 174.928] (**) | |-->Monitor "<default monitor>"
[ 174.954] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 174.955] (==) Automatically adding devices
[ 174.955] (==) Automatically enabling devices
[ 175.021] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 175.021] Entry deleted from font path.
[ 175.057] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 175.057] Entry deleted from font path.
[ 175.057] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 175.059] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 175.059] Entry deleted from font path.
[ 175.059] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 175.059] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 175.059] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 175.060] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 175.072] (II) Loader magic: 0x8228580
[ 175.073] (II) Module ABI versions:
[ 175.073] X.Org ANSI C Emulation: 0.4
[ 175.073] X.Org Video Driver: 11.0
[ 175.073] X.Org XInput driver : 13.0
[ 175.073] X.Org Server Extension : 6.0
[ 175.078] (--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 rev 0, Mem @ 0xe0000000/16777216
[ 175.079] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 175.079] (II) LoadModule: "extmod"
[ 175.104] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 175.136] (II) Module extmod: vendor="X.Org Foundation"
[ 175.136] compiled for 1.11.3, module version = 1.0.0
[ 175.136] Module class: X.Org Server Extension
[ 175.137] ABI class: X.Org Server Extension, version 6.0
[ 175.137] (II) Loading extension MIT-SCREEN-SAVER
[ 175.137] (II) Loading extension XFree86-VidModeExtension
[ 175.137] (II) Loading extension XFree86-DGA
[ 175.138] (II) Loading extension DPMS
[ 175.138] (II) Loading extension XVideo
[ 175.138] (II) Loading extension XVideo-MotionCompensation
[ 175.138] (II) Loading extension X-Resource
[ 175.139] (II) LoadModule: "dbe"
[ 175.142] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 175.146] (II) Module dbe: vendor="X.Org Foundation"
[ 175.146] compiled for 1.11.3, module version = 1.0.0
[ 175.146] Module class: X.Org Server Extension
[ 175.146] ABI class: X.Org Server Extension, version 6.0
[ 175.146] (II) Loading extension DOUBLE-BUFFER
[ 175.146] (II) LoadModule: "glx"
[ 175.147] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 175.166] (II) Module glx: vendor="X.Org Foundation"
[ 175.166] compiled for 1.11.3, module version = 1.0.0
[ 175.166] ABI class: X.Org Server Extension, version 6.0
[ 175.166] (==) AIGLX enabled
[ 175.166] (II) Loading extension GLX
[ 175.167] (II) LoadModule: "record"
[ 175.169] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 175.172] (II) Module record: vendor="X.Org Foundation"
[ 175.173] compiled for 1.11.3, module version = 1.13.0
[ 175.173] Module class: X.Org Server Extension
[ 175.173] ABI class: X.Org Server Extension, version 6.0
[ 175.173] (II) Loading extension RECORD
[ 175.173] (II) LoadModule: "dri"
[ 175.174] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 175.205] (II) Module dri: vendor="X.Org Foundation"
[ 175.205] compiled for 1.11.3, module version = 1.0.0
[ 175.205] ABI class: X.Org Server Extension, version 6.0
[ 175.205] (II) Loading extension XFree86-DRI
[ 175.205] (II) LoadModule: "dri2"
[ 175.207] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 175.210] (II) Module dri2: vendor="X.Org Foundation"
[ 175.210] compiled for 1.11.3, module version = 1.2.0
[ 175.210] ABI class: X.Org Server Extension, version 6.0
[ 175.210] (II) Loading extension DRI2
[ 175.211] (==) Matched vboxvideo as autoconfigured driver 0
[ 175.211] (==) Matched vesa as autoconfigured driver 1
[ 175.211] (==) Matched fbdev as autoconfigured driver 2
[ 175.211] (==) Assigned the driver to the xf86ConfigLayout
[ 175.211] (II) LoadModule: "vboxvideo"
[ 175.247] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
[ 175.265] (II) Module vboxvideo: vendor="Oracle Corporation"
[ 175.266] compiled for 1.5.99.901, module version = 1.0.1
[ 175.266] Module class: X.Org Video Driver
[ 175.266] ABI class: X.Org Video Driver, version 11.0
[ 175.266] (**) Load address of symbol "VBOXVIDEO" is 0xb7396420
[ 175.266] (II) LoadModule: "vesa"
[ 175.268] (WW) Warning, couldn't open module vesa
[ 175.268] (II) UnloadModule: "vesa"
[ 175.269] (II) Unloading vesa
[ 175.269] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 175.269] (II) LoadModule: "fbdev"
[ 175.271] (WW) Warning, couldn't open module fbdev
[ 175.271] (II) UnloadModule: "fbdev"
[ 175.271] (II) Unloading fbdev
[ 175.272] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 175.272] (II) VBoxVideo: guest driver for VirtualBox: vbox
[ 175.273] (--) using VT number 7
[ 175.301] (II) Loading /usr/lib/xorg/modules/drivers/vboxvideo.so
[ 175.311] (II) VBoxVideo(0): VirtualBox guest additions video driver version 4.1.8_OSE
[ 175.341] (II) Loading sub module "ramdac"
[ 175.341] (II) LoadModule: "ramdac"
[ 175.342] (II) Module "ramdac" already built-in
[ 175.342] (II) Loading sub module "fb"
[ 175.342] (II) LoadModule: "fb"
[ 175.344] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 175.361] (II) Module fb: vendor="X.Org Foundation"
[ 175.361] compiled for 1.11.3, module version = 1.0.0
[ 175.362] ABI class: X.Org ANSI C Emulation, version 0.4
[ 175.362] (II) Loading sub module "shadowfb"
[ 175.362] (II) LoadModule: "shadowfb"
[ 175.370] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 175.378] (II) Module shadowfb: vendor="X.Org Foundation"
[ 175.378] compiled for 1.11.3, module version = 1.0.0
[ 175.379] ABI class: X.Org ANSI C Emulation, version 0.4
[ 175.379] (II) Loading sub module "vgahw"
[ 175.379] (II) LoadModule: "vgahw"
[ 175.379] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 175.383] (II) Module vgahw: vendor="X.Org Foundation"
[ 175.383] compiled for 1.11.3, module version = 0.1.0
[ 175.383] ABI class: X.Org Video Driver, version 11.0
[ 175.383] (II) Loading sub module "dri"
[ 175.383] (II) LoadModule: "dri"
[ 175.384] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 175.384] (II) Module dri: vendor="X.Org Foundation"
[ 175.384] compiled for 1.11.3, module version = 1.0.0
[ 175.384] ABI class: X.Org Server Extension, version 6.0
[ 175.384] (II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 175.385] (==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
[ 175.385] (--) VBoxVideo(0): Virtual size is 32000x32000 (pitch 32000)
[ 175.385] (**) VBoxVideo(0): Built-in mode "VBoxInitialMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 175.385] (II) VBoxVideo(0): Modeline "VBoxInitialMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 175.385] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 175.385] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 175.385] (**) VBoxVideo(0): Built-in mode "VBoxDynamicMode": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 175.386] (II) VBoxVideo(0): Modeline "VBoxDynamicMode"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 175.386] (**) VBoxVideo(0): Built-in mode "VBox-1024x768": 47.8 MHz (scaled from 0.0 MHz), 46.4 kHz, 60.0 Hz
[ 175.386] (II) VBoxVideo(0): Modeline "VBox-1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 175.386] (**) VBoxVideo(0): Built-in mode "VBox-800x600": 29.3 MHz (scaled from 0.0 MHz), 36.4 kHz, 60.0 Hz
[ 175.386] (II) VBoxVideo(0): Modeline "VBox-800x600"x0.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 175.386] (**) VBoxVideo(0): Built-in mode "VBox-640x480": 18.8 MHz (scaled from 0.0 MHz), 29.2 kHz, 60.0 Hz
[ 175.386] (II) VBoxVideo(0): Modeline "VBox-640x480"x0.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 175.389] (II) VBoxVideo(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
[ 175.389] (==) VBoxVideo(0): RGB weight 888
[ 175.389] (==) VBoxVideo(0): Default visual is TrueColor
[ 175.389] (==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
[ 175.390] (==) VBoxVideo(0): DPI set to (96, 96)
[ 175.390] (--) Depth 24 pixmap format is 32 bpp
[ 175.820] drmOpenDevice: node name is /dev/dri/card0
[ 175.821] drmOpenDevice: open result is 13, (OK)
[ 175.828] drmOpenDevice: node name is /dev/dri/card0
[ 175.829] drmOpenDevice: open result is 13, (OK)
[ 175.829] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 175.829] drmOpenDevice: node name is /dev/dri/card0
[ 175.829] drmOpenDevice: open result is 13, (OK)
[ 175.829] drmOpenByBusid: drmOpenMinor returns 13
[ 175.829] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 175.830] (II) [drm] DRM interface version 1.4
[ 175.830] (II) [drm] DRM open master succeeded.
[ 175.830] (II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
[ 175.830] (II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
[ 175.831] (II) VBoxVideo(0): [drm] added 1 reserved context for kernel
[ 175.831] (II) VBoxVideo(0): X context handle = 0x1
[ 175.835] (II) VBoxVideo(0): [drm] installed DRM signal handler
[ 175.836] (II) VBoxVideo(0): visual configurations initialized
[ 175.845] (II) VBoxVideo(0): Requested monitor count: 1
[ 175.845] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 175.845] (II) VBoxVideo(0): Output VBOX0 has no monitor section
[ 175.846] (II) VBoxVideo(0): EDID for output VBOX0
[ 175.846] (II) VBoxVideo(0): Manufacturer: VBX Model: 0 Serial#: 50332672
[ 175.846] (II) VBoxVideo(0): Year: 1990 Week: 1
[ 175.846] (II) VBoxVideo(0): EDID Version: 1.3
[ 175.846] (II) VBoxVideo(0): Digital Display Input
[ 175.846] (II) VBoxVideo(0): Indeterminate output size
[ 175.846] (II) VBoxVideo(0): Gamma: 2.20
[ 175.846] (II) VBoxVideo(0): DPMS capabilities: StandBy Suspend Off
[ 175.847] (II) VBoxVideo(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 175.847] (II) VBoxVideo(0): Default color space is primary color space
[ 175.847] (II) VBoxVideo(0): First detailed timing is preferred mode
[ 175.847] (II) VBoxVideo(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 175.847] (II) VBoxVideo(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 175.847] (II) VBoxVideo(0): Manufacturer's mask: 0
[ 175.847] (II) VBoxVideo(0): Supported detailed timing:
[ 175.847] (II) VBoxVideo(0): clock: 47.8 MHz Image Size: 0 x 0 mm
[ 175.847] (II) VBoxVideo(0): h_active: 1024 h_sync: 1026 h_sync_end 1028 h_blank_end 1030 h_border: 0
[ 175.848] (II) VBoxVideo(0): v_active: 768 v_sync: 770 v_sync_end 772 v_blanking: 774 v_border: 0
[ 175.848] (II) VBoxVideo(0): Ranges: V min: 0 V max: 200 Hz, H min: 0 H max: 200 kHz, PixClock max 1005 MHz
[ 175.848] (II) VBoxVideo(0): Monitor name: VBOX monitor
[ 175.848] (II) VBoxVideo(0): EDID (in hex):
[ 175.848] (II) VBoxVideo(0): 00ffffffffffff005858000000040003
[ 175.848] (II) VBoxVideo(0): 0100010380000078eeee91a3544c9926
[ 175.848] (II) VBoxVideo(0): 0f505400000001010101010101010101
[ 175.848] (II) VBoxVideo(0): 010101010101af120006400006300202
[ 175.848] (II) VBoxVideo(0): 2200000000000000000000fd0000c800
[ 175.848] (II) VBoxVideo(0): c864000a202020202020000000fc0056
[ 175.849] (II) VBoxVideo(0): 424f58206d6f6e69746f720a00000010
[ 175.849] (II) VBoxVideo(0): 000a20202020202020202020202000fb
[ 175.849] (II) VBoxVideo(0): EDID vendor "VBX", prod id 0
[ 175.849] (II) VBoxVideo(0): DDCModeFromDetailedTiming: 1024x768 Warning: We only handle separate sync.
[ 175.849] (II) VBoxVideo(0): Using hsync ranges from config file
[ 175.849] (II) VBoxVideo(0): Using vrefresh ranges from config file
[ 175.849] (II) VBoxVideo(0): Printing DDC gathered Modelines:
[ 175.850] (II) VBoxVideo(0): Modeline "1024x768"x0.0 47.83 1024 1026 1028 1030 768 770 772 774 -hsync -vsync (46.4 kHz)
[ 175.851] (II) VBoxVideo(0): Printing probed modes for output VBOX0
[ 175.851] (II) VBoxVideo(0): Modeline "1024x768"x60.0 47.83 1024 1026 1028 1030 768 770 772 774 (46.4 kHz)
[ 175.851] (II) VBoxVideo(0): Modeline "800x600"x60.0 29.31 800 802 804 806 600 602 604 606 (36.4 kHz)
[ 175.851] (II) VBoxVideo(0): Modeline "640x480"x60.0 18.84 640 642 644 646 480 482 484 486 (29.2 kHz)
[ 175.851] (II) VBoxVideo(0): Output VBOX0 connected
[ 175.852] (II) VBoxVideo(0): Using exact sizes for initial modes
[ 175.852] (II) VBoxVideo(0): Output VBOX0 using initial mode 1024x768
[ 175.852] (II) VBoxVideo(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 175.852] (II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 175.856] (==) VBoxVideo(0): DPMS enabled
[ 175.857] (II) VBoxVideo(0): [DRI] installation complete
[ 175.857] (--) RandR disabled
[ 175.857] (II) Initializing built-in extension Generic Event Extension
[ 175.857] (II) Initializing built-in extension SHAPE
[ 175.857] (II) Initializing built-in extension MIT-SHM
[ 175.857] (II) Initializing built-in extension XInputExtension
[ 175.857] (II) Initializing built-in extension XTEST
[ 175.857] (II) Initializing built-in extension BIG-REQUESTS
[ 175.857] (II) Initializing built-in extension SYNC
[ 175.857] (II) Initializing built-in extension XKEYBOARD
[ 175.857] (II) Initializing built-in extension XC-MISC
[ 175.858] (II) Initializing built-in extension SECURITY
[ 175.858] (II) Initializing built-in extension XINERAMA
[ 175.858] (II) Initializing built-in extension XFIXES
[ 175.858] (II) Initializing built-in extension RENDER
[ 175.858] (II) Initializing built-in extension RANDR
[ 175.858] (II) Initializing built-in extension COMPOSITE
[ 175.858] (II) Initializing built-in extension DAMAGE
[ 175.887] (II) AIGLX: Screen 0 is not DRI2 capable
[ 175.887] drmOpenDevice: node name is /dev/dri/card0
[ 175.887] drmOpenDevice: open result is 14, (OK)
[ 175.888] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 175.888] drmOpenDevice: node name is /dev/dri/card0
[ 175.888] drmOpenDevice: open result is 14, (OK)
[ 175.888] drmOpenByBusid: drmOpenMinor returns 14
[ 175.888] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[ 175.888] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 176.017] (II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
[ 176.017] (II) The file referenced, is *NOT* loaded
[ 176.017] (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
[ 176.017] (EE) AIGLX error: vboxvideo does not export required DRI extension
[ 176.019] (EE) AIGLX: reverting to software rendering
[ 176.437] (II) AIGLX: Loaded and initialized swrast
[ 176.437] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 176.442] (II) VBoxVideo(0): Setting screen physical size to 270 x 203
[ 176.899] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 176.899] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 176.899] (II) LoadModule: "evdev"
[ 176.901] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 176.935] (II) Module evdev: vendor="X.Org Foundation"
[ 176.935] compiled for 1.10.99.902, module version = 2.6.0
[ 176.935] Module class: X.Org XInput Driver
[ 176.935] ABI class: X.Org XInput driver, version 13.0
[ 176.935] (II) Using input driver 'evdev' for 'Power Button'
[ 176.935] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 176.935] (**) Power Button: always reports core events
[ 176.935] (**) Power Button: Device: "/dev/input/event3"
[ 176.936] (--) Power Button: Found keys
[ 176.936] (II) Power Button: Configuring as keyboard
[ 176.936] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 176.936] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 176.936] (**) Option "xkb_rules" "evdev"
[ 176.936] (**) Option "xkb_model" "evdev"
[ 176.936] (**) Option "xkb_layout" "us"
[ 177.050] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 177.050] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 177.050] (II) Using input driver 'evdev' for 'Sleep Button'
[ 177.050] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 177.050] (**) Sleep Button: always reports core events
[ 177.051] (**) Sleep Button: Device: "/dev/input/event4"
[ 177.051] (--) Sleep Button: Found keys
[ 177.051] (II) Sleep Button: Configuring as keyboard
[ 177.051] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSLPBN:00/input/input4/event4"
[ 177.051] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[ 177.051] (**) Option "xkb_rules" "evdev"
[ 177.051] (**) Option "xkb_model" "evdev"
[ 177.051] (**) Option "xkb_layout" "us"
[ 177.055] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/event1)
[ 177.055] (**) VirtualBox USB Tablet: Applying InputClass "evdev pointer catchall"
[ 177.055] (II) Using input driver 'evdev' for 'VirtualBox USB Tablet'
[ 177.055] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 177.055] (**) VirtualBox USB Tablet: always reports core events
[ 177.055] (**) VirtualBox USB Tablet: Device: "/dev/input/event1"
[ 177.056] (--) VirtualBox USB Tablet: Found 9 mouse buttons
[ 177.056] (--) VirtualBox USB Tablet: Found scroll wheel(s)
[ 177.056] (--) VirtualBox USB Tablet: Found relative axes
[ 177.056] (--) VirtualBox USB Tablet: Found absolute axes
[ 177.057] (--) VirtualBox USB Tablet: Found x and y absolute axes
[ 177.057] (II) VirtualBox USB Tablet: Configuring as mouse
[ 177.057] (II) VirtualBox USB Tablet: Adding scrollwheel support
[ 177.057] (**) VirtualBox USB Tablet: YAxisMapping: buttons 4 and 5
[ 177.057] (**) VirtualBox USB Tablet: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 177.057] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:06.0/usb1/1-1/1-1:1.0/input/input1/event1"
[ 177.057] (II) XINPUT: Adding extended input device "VirtualBox USB Tablet" (type: MOUSE, id 8)
[ 177.057] (EE) VirtualBox USB Tablet: failed to initialize for relative axes.
[ 177.058] (II) VirtualBox USB Tablet: initialized for absolute axes.
[ 177.058] (**) VirtualBox USB Tablet: (accel) keeping acceleration scheme 1
[ 177.058] (**) VirtualBox USB Tablet: (accel) acceleration profile 0
[ 177.058] (**) VirtualBox USB Tablet: (accel) acceleration factor: 2.000
[ 177.058] (**) VirtualBox USB Tablet: (accel) acceleration threshold: 4
[ 177.060] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/js0)
[ 177.060] (II) No input driver/identifier specified (ignoring)
[ 177.062] (II) config/udev: Adding input device VirtualBox USB Tablet (/dev/input/mouse0)
[ 177.063] (II) No input driver/identifier specified (ignoring)
[ 177.065] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 177.065] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 177.065] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 177.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 177.066] (**) AT Translated Set 2 keyboard: always reports core events
[ 177.066] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 177.066] (--) AT Translated Set 2 keyboard: Found keys
[ 177.066] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 177.066] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 177.066] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 177.066] (**) Option "xkb_rules" "evdev"
[ 177.067] (**) Option "xkb_model" "evdev"
[ 177.067] (**) Option "xkb_layout" "us"
[ 177.070] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event5)
[ 177.070] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 177.070] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 177.070] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 177.070] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 177.070] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
[ 177.070] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 177.071] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 177.071] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 177.071] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 177.071] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 177.071] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 177.071] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 177.071] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 177.071] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[ 177.071] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 177.072] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 177.072] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 177.072] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 177.072] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 177.072] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 177.074] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse1)
[ 177.074] (II) No input driver/identifier specified (ignoring)
[ 177.077] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 177.078] (II) No input driver/identifier specified (ignoring)
[ 177.082] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/event2)
[ 177.082] (**) VirtualBox mouse integration: Applying InputClass "evdev pointer catchall"
[ 177.082] (II) Using input driver 'evdev' for 'VirtualBox mouse integration'
[ 177.082] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 177.082] (**) VirtualBox mouse integration: always reports core events
[ 177.082] (**) VirtualBox mouse integration: Device: "/dev/input/event2"
[ 177.083] (--) VirtualBox mouse integration: Found 1 mouse buttons
[ 177.083] (--) VirtualBox mouse integration: Found absolute axes
[ 177.083] (--) VirtualBox mouse integration: Found x and y absolute axes
[ 177.083] (II) VirtualBox mouse integration: Configuring as mouse
[ 177.083] (**) VirtualBox mouse integration: YAxisMapping: buttons 4 and 5
[ 177.083] (**) VirtualBox mouse integration: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 177.084] (**) Option "config_info" "udev:/sys/devices/virtual/input/input2/event2"
[ 177.084] (II) XINPUT: Adding extended input device "VirtualBox mouse integration" (type: MOUSE, id 11)
[ 177.084] (II) VirtualBox mouse integration: initialized for absolute axes.
[ 177.084] (**) VirtualBox mouse integration: (accel) keeping acceleration scheme 1
[ 177.084] (**) VirtualBox mouse integration: (accel) acceleration profile 0
[ 177.084] (**) VirtualBox mouse integration: (accel) acceleration factor: 2.000
[ 177.084] (**) VirtualBox mouse integration: (accel) acceleration threshold: 4
[ 177.086] (II) config/udev: Adding input device VirtualBox mouse integration (/dev/input/js1)
[ 177.086] (II) No input driver/identifier specified (ignoring)
BTW it was a real hassle to find the content of those files when you do not have a terminal emulator to use.

Is the macbook compatible with PC's programs and documents and etc?

I am switching from a PC to a macbook very soon, and my mom is worried that I will have this macbook and if I'm in a project or something with someone who has a PC, and i need something to be switched from my computer to theirs, or vice versa, that it won't work.

yeah MS Office for mac is compatible with all word, powerpoint and excel files. As for programs no they're not, but Im sure you could find the same program or a look a like for the mac. If you could be more specific with your "programs" and "documents" that would be awesome.

I've tried to troubleshoot downloading Firefox but it won't open on Windows XP. The Firefox Update box with the hour glass symbol runs for hours. Then I have trouble even shutting down. When I click on Firefox, no window, program won't quit, etc....

Windows XP. I used to use Firefox and it worked okay. I'm not sure why I downloaded a new version but it won't open. The window that says "Firefox Update" continues to try to load. Hour glass symbol, for hours. If I try to click on the Desktop symbol, Nothing. Then when I try to shut down, it's slow, programs won't quit, or it freezes. I've removed Firefox completely and tried downloading again with the same results. Even with the latest version. Shit. Whassup?

Hi zenithtwc, to test whether this is a settings issue, could you do a three-minute experiment?
'''Create a new Firefox profile'''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should have completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
firefox.exe -P
''Don't delete anything here.'' Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like Test731, and skip the option to change the folder location. Then start Firefox in the new profile you created.
Can it reach the internet?
When returning to the Profile Manager, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

Missing text in many programs - Rox, Thunar, Deluge, etc [SOLVED]

Hi all,
I'm having a very confusing problem. Basically, text is just missing from certain programs. Here are a few quick examples:
Thunar:
Rox:
Deluge:
It's very strange. First of all, this just started happening recently, and I don't think after an update or anything. But I know "it just randomly started happening" is a dumb thing to say.
Here is the info I think could be useful:
-I have the ttf-freefont package and the xorg-font family of packages
-I have updated and restarted since this happened; nothing has changed
-The filenames look perfect if I just list them in the terminal (no newlines or anything)
-The filenames that have disappeared aren't anything special, it's seemingly random (no weird characters in them)
-The icons are totally fine
-All the things with missing text are still totally functional if I use them
-I thought this was a file manager issue, but it happening in Deluge too, so nope
-I downloaded and tried Nautilus, same deal, but some files had random words from their name appear. Just as bad basically though
-I also downloaded and tried Midnight Commander (a text based file manager) and everything is perfectly fine in it
Any suggestions? This is very mysterious, and driving me nuts.
Thanks!!
Edit: To clarify, in the Thunar and Rox pictures I just took screenshots of a small portion of a folder. In the Deluge pictures, in the first one those 3 blank looking buttons in that menu should have more words (like "Remove Torrent"), and in the second one, those + and - buttons should also have text.
Last edited by Declan (2012-05-10 00:41:48)

Cairo 1.12 was just moved into [extra], so chances are this bug will reappear the next time you -Syu. If you're running Nouveau drivers, then the underlying cause of your issue might be this bug:
https://bugs.archlinux.org/task/29495
If this is indeed your issue, then you need to install the xf86-video-nouveau-0.0.16_git20120512-1 package from [testing]. If you re-enable [testing] and do an -Syu, it should automatically install this package.

Which Mac is better for programming purposes (IOS, Android, etc..), Mac Pro or Air?

Hi,
i would like to buy a new Mac notebook, however i cant decide at all on whether to get Air or Pro. i would like to use the notebook for programming purposes. i would bascially be developing IOS and Android Apps as well as some python and ruby. so which one of them in general would be better for me? which can take a lot of work on it and still be efficient?
Thank you

You should also ask this in the MacBook Pro and MacBook Air forums. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/notebooks/macbook_air

Access servers using FTP programs like Cyberduck, Coda, etc

Hi there, I posted this question elsewhere, but I'm not sure whether it was the right spot so I thought I'd start a new discussion.
I'm having issues with accessing the server's that my two websites are on.
I've been using Cyberduck for FTP'ing for a while now but this week I bought a new laptop with Mountain Lion on it. One of my websites I use iWeb and the other is through Wordpress, both of which I can access the server (and transfer files) using Cyberduck.
The first time I updated my site it worked. The next day however it didn't - and hasn't since. Now I can't access the server at all. The messages I get, depending on the program, are usually variations on "server not responding" "connection timeout" "connection refused" "connection closed" and on and on it goes.
I have tried using Cyberduck, Coda, Folklift and Transmitter but to no avail.
I tried a little App called 'ftpd-enable' but nothing.
I've tried all the different commands - like the one for Terminal above - nothing.
Rebooted the computer - nothing.
Double checked all the server login details - nothing.
Shouted and screamed - high blood pressure.
I hope someone may be able to help me!
Cheers

Thanks for your reply.
I've been in contact with the server administrator and everything works from his end - all the login details appear to be correct and he can easily access the server.
I've tried deleting the bookmarks and opening a brand new connection but no change.
Perhaps I should clarify: After stuffing around a bit more, it seems I can sort-of access the server. I seem to be able to login but once I do what happens is if I try to upload or download a file, it goes through the following process:
Opening FTP
Authenticating as 'my username'
FTP connection opened
Gaining permission of 'file name'
Listing directory
Disconnecting
Then I get the message: Network Error: Download failed. Connection refused. And that's it!
I notice also that if I create a new folder, it eventually creates the folder but then the folder has a red minus sign on it - like a no access graphic.
By the way, Firewall is off.

Associate ed2k protocol to program (eMule or aMule etc. )

Similar Messages

Maybe you are looking for