Associated statement is not prepared.

Hi All,
I am trying to install Netweaver ABAP, while installing the "Central Database" [Uni-code], i am getting the following message.
<b>"ERROR 2006-07-11 08:58:23
MDB-05053 Errors executing sql command: [Microsoft][ODBC SQL Server Driver]Associated statement is not prepared"</b>.
This message popsup while do the following task.
<b>MSSQL: Grant DB access for OS user(BLRK432DSAPServiceW22)</b>
Have given Full rights to "SAPServiceW22" user.
Can anyone tell whats the FIX for this.
Thanks,
Shridhar.

Hi Shridhar,
I am encountering the same problem as you.
I am installing database instance now.
The same error
"MDB-05053 Errors executing sql command:[Microsoft][ODBC SQL Server Driver]Associated statement is not prepared" durning the MSSQL:GrantDB access for OS user(xxxx\SAPServicexxx).
Was your problem already solved ?
If so, please let me the solution.
Best Regards,
KOGURE Hiroto

Similar Messages

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Every time I try to export my movie from iMovie, I keep getting a message that states, "Unable to prepare project for publication. The project could not be prepared for publication because an error occurred. (-50). HELP

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
Trash the Preference file:
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
from: jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
from Karsten S
Shorter clips than 1,5 sec might be one of the culptrits
Bengt cont.
Set-Up might differ
• Mac OS - most probably X.7 or more
• iMovie version - more than iM'11 v. 9.0.4
Action taken
• Finalizing project - I never do as I never understood the gain to do so
• Share as HD to iDVD - never give any gain but if it works the resulting DVD is less quality than if SD-quality was shared
fps - set
•I only use PAL (25fps)
Yours Bengt W

How to set the number of rings for the agent phone rings before it get the not prepared state

hi, how to set the number of rings for the agent phone rings? before it get the not prepared state.
thanks

The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin

Script to know how many statements are not loaded in oracle CM

Hi,
Can some one would help me on how to prepare a script to know the bank statements are not loaded into oracle CM and how many checks under that particular statement are not loaded??
I have the following info with me..
1. The statements are loaded in a temporary table as soon as we run statement loader program.
2. Then the records will get into ce_statement_headers_int_all and ce_statement_lines_interface.
3. Then they will get loaded into ce_statement_headers_all and ce_statement_lines tables.
Now, the only thing i am confused is how to get to know the statements list that are not loaded into oracle along with the error message. i am confused which tables will give the exact info ce_statement_headers_int_all and ce_statement_lines_interface or ce_headers_interface_errors and ce_lines_interface_errors??? immediate help would be highly appreciated and its very urgent...........
Thanks.

Hi Helios,
I dint get you. This is not something which SR can be raised. I need to know how script can be written to know the statements that are not loaded in oracle cash management. I need to prepare a notification where in that should contain how many statements have been loaded successfully and how many are not on a daily basis...
Thanks.

In audit few statemntns SQL statements is not populating

Hi,
I enable audit,for few (SELECT,CREATE TABLE)statements audit not populating sqltext in sys.aud$.But i can see few more SELECT&CREATE TABLE activityit populates SQLTEXT.
if it not populates sql text ,what ll be the reason behind this?

Thank you for quick reply, Joe!
Yes, I meant the second option with '%' symbols but still I get incorrect results. Seems that OpenSQL layer ignores the 'NOT LIKE' criterias. Any other ideas?
I'm pasting you the log I have with the JPQL and the prepared SQL queries
<query jpql="select distinct e, e.time.srvrStrInitTime from SlAutoGeneral e where e.status not like :status order by e.time.srvrStrInitTime desc ">
    <executeQuery>
        <prepare sql="SELECT DISTINCT E.ID E_ID_id,E.STATUS E_STATUS_status,E.SYNTH_SUBJECT E_SYNTH_SUBJECT_synthSubject,
          ALIAS_1.SRVR_STR_INIT_TIME DISPLAY_2
          FROM SL_AUTO_TIME ALIAS_1, SL_AUTO_GENERAL E WHERE ALIAS_1.ID = E.ID AND E.STATUS NOT LIKE ? ORDER BY DISPLAY_2 DESC"/>
Best regards,
Martin

Windows could not prepare the computer to boot into the next phase of the installation. Windows 8.1

Hi! I have a Lenovo G500 notebook with a new HDD. I try to do a clean install but i always get an error message" windows could not prepare the computet the boot into the next phase. Restart the insralattion." i talked with my country's windows
help line and the operator said i have to change something in the BIOS. Can somebody help me?

Hi,
You can enter BIOS, then change the Boot sequence for CD/DVD, HDD or USB. Make sure that the disk speck is enough for storing the installation files. Make sure the installation media is fine.
Probably cause of this error is that the associated disk partition is corrupted. In this situation, you need to delete the partition and then repartition the hard drive, after that, try to install Windows again, check if error has gone.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Could not prepare resource 'OatmialResource

We´ve been facing a problem while weblogic asks tuxedo to prepare XA transaction before commit, as no response is received it calls rollback after all. Would anybody provide feedback on this error ?
Environment details: Weblogic 10.3.2 acessing Tuxedo 8.1 through WTC
Exception occurred during commit of transaction Xid=BEA1-0441E759B8D59E472B1E(3521575),Status=Rolled back. [Reason=javax.transaction.xa.XAException],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=30,seconds left=30,XAServerResourceInfo[WLStore_DefaultDomain__WLS_DefaultServer]=(ServerResourceInfo[WLStore_DefaultDomain__WLS_DefaultServer]=(state=rolledback,assigned=DefaultServer),xar=WLStore_DefaultDomain__WLS_DefaultServer18552479,re-Registered = false),XAServerResourceInfo[jdbc_xxx_DefaultDomain]=(ServerResourceInfo[jdbc_xxx_DefaultDomain]=(state=rolledback,assigned=DefaultServer),xar=jdbc_xxx,re-Registered = false),XAServerResourceInfo[OatmialResource]=(ServerResourceInfo[OatmialResource]=(state=rolledback,assigned=DefaultServer),xar=com.bea.core.jatmi.internal.TuxedoXA@1d3b2e9,re-Registered = false),SCInfo[DefaultDomain+DefaultServer]=(state=rolledback),local properties=({weblogic.jdbc.jta.jdbc_xxx=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=DefaultServer+X.X.X.X:XXXX+DefaultDomain+t3+, XAResources={OatmialResource, WLStore_DefaultDomain__WLS_DefaultServer, jdbc_xxx_DefaultDomain, WSATGatewayRM_DefaultServer_DefaultDomain},NonXAResources={})],CoordinatorURL=DefaultServer+X.X.X.X:XXXX+DefaultDomain+t3+): weblogic.transaction.RollbackException: Could not prepare resource 'OatmialResource
at weblogic.transaction.internal.TransactionImpl.throwRollbackException(TransactionImpl.java:1848)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:339)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:233)
Caused by: javax.transaction.xa.XAException
at com.bea.core.jatmi.internal.TuxedoXA.internalPrepare(TuxedoXA.java:625)
at com.bea.core.jatmi.internal.TuxedoXA.prepare(TuxedoXA.java:521)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1295)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:500)
at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:361)
... 3 more

Thanks for looking at this. Here is the tuxedo configuration.
#### DMCONFIG
wtc_xxxxxx
GWGRP=WTC
TYPE=TDOMAIN
DOMAINID="wtc_xxxxxx"
BLOCKTIME=20
DMTLOGDEV="/opt/xxxxx/log/xxxxxUDL"
DMTLOGNAME="WTC_DMTLOG"
DMTLOGSIZE=1024
BLOB_SHM_SIZE=5000000
CONNECTION_POLICY=ON_DEMAND
wtc_xxxxxx NWADDR="//x.x.x.x:xxxx"
E0000XXXX
AUTOTRAN=N
CONV=N
API=ATMI
LDOM=xxxxxx
RDOM=mainframe
RNAME="X000:XXXXXXX"
INBUFTYPE="STRING"
OUTBUFTYPE="STRING"
TRANTIME=120
FUNCTION=DPL
#### UBBCONFIG
TLOGDEVICE="/opt/xxxxx/log/xxxxxUDL"
TLOGNAME="TLOG"
TLOGSIZE=1024
xxxxxx LMID=SITE1 GRPNO=777
TMSNAME=oratmss TMSCOUNT=10
OPENINFO="Oracle_XA:Oracle_XA+Acc=P/exxxxxx/xxxxxx+SesTm=240+SesWt=60+DbgFl=0x7+SqlNet=xxxxxx+LogDir=/opt/xxxxx/log"
GWADM SRVGRP=WTC SRVID=666
GWTDOMAIN SRVGRP=WTC SRVID=888
xxxxxxxxxxxx SRVGRP=xxxxxx SRVID=999
REPLYQ=Y RQADDR=RQxxxxxxxxxxxx
RESTART=Y MAXGEN=10 GRACE=0 MIN=1 MAX=10
CLOPT="-A -- -x"
Here is the tuxedo error. It happens before my call from weblogic to tuxedo, not a 100 % sure it´s related:
XXX.081011:120404.XXX!GWTDOMAIN.15430.1.0: gtrid x0 x4e42592e x35f66: LIBTUX_CAT:4055: ERROR: No service '..GWA9' in group 'WTC'
XXX.081011:120404.XXX!GWTDOMAIN.15430.1.0: gtrid x0 x4e42592e x35f66: LIBGW_CAT:5241: WARN: Can't send log request to GWADM. Performance may suffer
Inside CRM log:
When everything is ok:
REQUEST FOR Verb=SNACRM_PREPARE
==> Sending socket data: <<==
When there is an error:
REQUEST FOR Verb=SNACRM_PREPARE
==>> Socket data received: <<==
Couple of additional info:
- The error is intermittent, but when sna is "restarted" everything works just fine up to the error happens again.
- Mainframe is processing just fine
- Oracle is processing just fine
- The error happens when weblogic calls tuxedo via WTC within a XA transaction. Weblogic asks oracle (the other xa participant) to prepare and receives ok, when it asks tuxedo and no response is received 30 secods later (my weblogic transacion timeout) it calls rollback. When I increase this transaction time the same situation happens but the call to rollback happens x seconds later. Rollback is processing just fine.
- When WTC debug was enabled nothing different from this information has been found.
- Based on the research I´ve been doing it seems it would be related to the items below, but as we are not sure, still looking at other options while the ticket is processed:
http://download.oracle.com/docs/cd/E13203_01/tuxedo/eam/v91/relnot/relnot.html
CR233501 & CR235337
Fix for outbound transactions getting lost in CRM after SNACRM_PREPARE is sent to CRM.
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=776644.1
Thanks much.

HT1925 My ipod is not showing up when I have itunes up. I was told to remove itunes and reinstall however. I receive a message with unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-

can someone please advise on what I should do? unable to uninstall the Itunes. It states "could not open key HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\INTERFACE\(915DA835-02FE-4953-92FA-624BDF5D 85AB) VEIFY THAT YOU HAVE SUFFICIENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL, Which i did . I contacted the apple support and they could not help. has anyone gotten this error? Did some research some results show that this has occurred during updates on the itunes but has not seen how to successfully uninstall without getting this error. I attempted to use the control panel and uninstall but it provides me with the same error all the time. I NEED SOME Answers on this issue. Can you please help?!

Perhaps try the fixit from the following Microsoft web page. (Try the "problems uninstalling" option.)
Fix problems with programs that can't be installed or uninstalled

If statement is not validating properly in JSP

Actually i'm new to Java..
The problem is when i take the parameter from another file which is an empty text box and i submit that. In the next jsp file i'am taking this value using getParameter("xxxx").
if i send the empty or some value to this parameter, the if statement is not validating properly.
here is my code in jsp....
<%
String bgcolor = request.getParameter("bgColor");
out.println("Background Color = " + bgcolor);
if (bgcolor == null)
out.println("Hello Null");
else
out.println("Hello Not Null");
%>
Thanks in advance
Kumar

Hey there, you should know that Strings in Java are
different from other types like int and double for
example. Strings are objects so you cant check em
with == but with the standard method .equals This is true but is not the problem here.
@OP null and an empty length string are NOT the same thing. You probably want a check like
if(bgColor.length()<1)And you might want to trim the String first to get rid of whitespace.

Insert statement does not insert all records from a partitioned table

Hi
I need to insert records in to a table from a partitioned table.I set up a job and to my surprise i found that the insert statement is not inserting all the records on the partitioned table.
for example when i am using select statement on to a partitioned table
it gives me 400 records but when i insert it gives me only 100 records.
can anyone help in this matter.

INSERT INTO TABLENAME(COLUMNS)
(SELECT *
FROM SCHEMA1.TABLENAME1
JOIN SCHEMA2.TABLENAME2a
ON CONDITION
JOIN SCHEMA2.TABLENAME2 b
ON CONDITION AND CONDITION
WHERE CONDITION
AND CONDITION
AND CONDITION
AND CONDITION
AND (CONDITION
HAVING SUM(COLUMN) > 0
GROUP BY COLUMNS

Deploying Office 2013 x64 - feature installation state msp not applying

So I created my MSP with setup.exe /admin and configured a number of options in it. I saved the msp as "1Office64bit.msp" and saved it into the Updates folder. I also have a service pack for Office 2013 in the Updates folder.
I created an SCCM application to deploy office. My deployment installation program looks like this - setup.exe /config proplus.ww\config.xml
During my SCCM Build and Capture task sequence Office 2013 installs, the updates apply, and all of the settings in the MSP apply except for one. I specificed in the msp feature installation states to NOT install the Outlook feature, but it's not working?
Also - as a test after the task sequence completes, I run "msiexec /p \\pathtomsp\1Office64bit.msp - and it removes Office like it should. But I don't know why this doesn't happen during the initial installation?

You should use either a config xml file or an MSP during the installation of Office (2013). In your current command line it looks like you're trying to use both. As you saved the MSP file in the updates folder, simply specifying setup.exe should be enough
to start the installation and let it use the MSP.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
So I tried just running setup.exe and it doesn't seem to be working either. I verified in the ccm appenforce.log that the install command was just setup.exe (so the change made it to the client) but Outlook was still installed.
I'm going to try changing it to setup.exe /adminfile to see if that works.

Insert statement will not work if select statement has less number of colum

Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshad

user13360241 wrote:
Hi,
One of my thread is already resolved on the following URL : unable to insert rows into the table
DROP TABLE TEMP;
CREATE TABLE TEMP AS SELECT * FROM CASE_101 WHERE 1=2;
DECLARE
S VARCHAR2(200);
STMT VARCHAR2(500);
begin
for C in (select TABLE_NAME INTO S from USER_TABLES where TABLE_NAME like 'CASE%' TABLE_NAME NOT like '%OLD' and Num_ROWS > 0 order by TABLE_NAME) loop
STMT := 'INSERT INTO TEMP SELECT * FROM ';
STMT:=STMT || C.TABLE_NAME;
EXECUTE IMMEDIATE STMT;
dbms_output.put_line(c.table_name);
end loop;
end;
i am facing now some different; almost all the tables have same number of columns except in few of tables have some additional columns. As above i am creating a table "TEMP" who has highest column temp(by doing some manual process). The table who has less columns than "TEMP" table : Insert statement will not work. 'INSERT INTO TEMP SELECT * FROM less_columns_table_name'.
Please let me know , how can i execute proper way.
Thanks.
Best Regards
Arshadmore often than not "TEMP" tables are NOT required & are highly inefficient in Oracle.
Either only specify explicit column in TEMP to get data,
or provide value for "extra" column in TEMP

Radio button and associated functionality is not working!

Hi Pros,
I am facing the following problem:
1.I have an interactive PDF created in Acrobat 9 Pro.
2.PDF have few radio buttons, each radio buttons ahave assigned valus(eg: 1,2,3 etc)
3.I have a text box in which the value of selected radio button is displayed.
4.PDF is working fine on my machine.
5.Client is having Internet Explorer version 7.0.5 and Adobe reader:8.2.6
6.The radio buttons and associated functionality is not working on client's machine.
7.The text box shows '0' even if we a radio button with value 2 or 1 is selected.
What will be the problem? How can I fix this issue?
Please help.

Thanks alot for helping me on this.
Thanks to u also ~graffiti

Avoid JDBC sender error: Execute statement did not return a result set

Hi!
My JDBC sender adapter towards MS SQL server works fine, with an Execute statement calling a stored procedure that returns the source data needed. The stored procedure itself updates the status of database table records, so that only the unread records are returned each time the stored procedure is called.
However, the communication channel monitoring sets a red flag for the JDBC sender adapter, when there are no values to fetch from the database table (using the stored procedure). Message says: "Database-level error reported by JDBC driver while executing statement 'EXECUTE FetchMessage 1, 9000'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor."
This is not an error situation, as I do not expect there to be any values to fetch from the database at all times.
I do not see how to change the stored procedure to avoid this error.
Is there a parameter to be set on the JDBC adapter that I can use, so the red flag is avoided?
Thanks for any input!
Regards,
Oeystein Emhjellen

Hi Oeystein Emhjellen.
The problem is Store Procedure that has to generate always a ResultSet (or cursor). If it doesn't have a output, you have to generate an Empty ResultSet.
Like a SELECT Statement:
If there are data, SELECT get an output result but if it get nothing the SELECT Statement get a empty ResultSet.
Ask to your database team.
I hope it helps you.
Bruno.

Bootcamp 5.1 Windows could not prepare the computer to boot into the next phase of installation

I've searched the internet, I've tried solutions on some of the discussions on here:
Windows 8.1 install fails on new 2013 Retina MacBook
https://discussions.apple.com/message/23490854#23490854
How to install Windows 8.1 on Haswell MBP
https://discussions.apple.com/message/23545484#23545484
Windows 8.1 Install Fails on New 2013 Retina MacBook, Users Report
http://wind8apps.com/windows-8-1-install-fails-new-2013-retina-macbook/
(Can't try this one because I don't have physical media or a burner and don't want to upgrade to 8.1)
Tried maskedferret's and jarvil's instructions that might work for others but not for me. Also the process must be older version of disk utility. There is no "minus" to remove a partition in the one I have.
Half the problem is those threads are so long with people posting up their problems that are not even the same problem. So then you have to sift through all these responses that aren't even really releated.
If you're problem isn't this problem then please don't use this thread to solve another issue.
“Windows could not prepare the computer to boot into the next phase of the installation. To install Windows, restart the installation.”
I can't find in the release notes of any beta Maverick update that this is being addressed.
1) Does anyone know if there is a fix coming out for this?
2) Is there some solution that doesn't require to have physical media?
     a) I have Windows 8.1 iso and product key
     b) I have a 32gb USB stick that I had Bootcamp format
     c) I have a spare 16gb USB stick. Both are USB 2.0 so I can't do Windows To Go. Maybe I should get one.
3) I have no idea how tell which MacBookPro I have since no one at Apple seems to believe in model numbers. I just ordered it online two weeks ago and received it this week so I guess it's the "latest" model hardware wise. Running 10.9
The cloest possible solution I came across was to boot up Windows 8 OS on a USB stick (Not the install) and run diskpert or fdisk for mbr thought I can' try this out because I don't have Windows To Go. I'd rather have it worked problem from Apple if I can figure out when they plan to update I might be willing to wait.

Finally got a physical CD and to the third link option still same issue. Even worse actually as even after formating the partition I get a "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
Found my "-" minus remove parition in Disk Utility. Will attempt maskedferret's again

Associated statement is not prepared.

Similar Messages

Maybe you are looking for