Associates with station every 4 minutes

Copying two 20GB files to my AirDisk and I notice in the logs that the AEBS is re-associating with the MacPro (4x2.66 Xeon 10.5.2) I'm using every 4 minutes. AEBS (7.3.1) is set to N-only, wide channel, WPA group timeout every 1 day, 100% transmit, etc.
The copy never fails, but network activity drops to 0 when associating and then continues.
Setting the AEBS to N with G/A support doesn't display this symptom. N-only even with the re-association is about 60% faster. I'm wondering it isn't a memory problem on the AEBS? Does anyone know how the AEBS buffers what it writes to disk?

I haven't tried mine yet. I'm going to later today but I would suggest restoring it to the factory defaults and then installing the update. It's pretty common (not only for apple) for these types of problems to crop up after an update.
Clearing all the settings will place the device in a state that is ideal for the new firmware.
Good Luck.

Similar Messages

  • Kernal Panic with Airport every few minutes

    For a few weeks now my MacBook Pro began to have kernal panics once every 3 or 4 days. These kernal panics always happened at home and almost never at work. At work I am always plugged into Ethernet and at home I connect via an Airport Snow base station - 802.11b. So I have read a few post talking about the same exact issue as mine. Last night I got to the point where my MBP had a kernal panic every minutes and eventualy started to get the kernal panics durning the apple boot screen (Grey apple logo on darker gray back round).
    So I booted into Safe Boot and then repaired permissions. I was able to do a normal boot after that however I did kernal panic over and over every few minutes. So I decided to upgrade from 10.4.7 to 10.4.8. Before I did this I trashed my airport prefs and ran another repair on my disk permissions. The upgrade went well. I noticed that my boot time is about 30 seconds longer and about 15 degrees cooler - Based on Core Duo Temp .
    After work I turned on my MBP to test the airport and within about 20 seconds of sitting idle and not a single appliction open I got a Kernal panic...
    Is there somthing anyone can suggest. Something I haven't tried or maybe a work around until the issue is address in the next release of Mac OS X.
    I will post some of my panic log below which only goes back 5 days. Thanks in advance to anyone who can help. My next step is to call Apple but I thought this forum would be faster.
    Wed Oct 11 06:09:16 2006
    panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x00000020, CR3: 0x00da7000, CR4: 0x000006e0
    EAX: 0x00000001, EBX: 0x0001d000, ECX: 0x02dd4140, EDX: 0x02ca0e00
    ESP: 0x00000020, EBP: 0x13bcbe28, ESI: 0x00000000, EDI: 0x02ca0e00
    EFL: 0x00010297, EIP: 0x00160c37, CS: 0x00000008, DS: 0x13bc0010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13bcbc78 : 0x128b5e (0x3bc46c 0x13bcbc9c 0x131bbc 0x0)
    0x13bcbcb8 : 0x19cadf (0x3c18e4 0x0 0xe 0x3c169c)
    0x13bcbd68 : 0x197c7d (0x13bcbd7c 0x13bcbe28 0x160c37 0x150048)
    0x13bcbd74 : 0x160c37 (0x150048 0x2ca0010 0x10010 0x13bc0010)
    0x13bcbe28 : 0x161338 (0x174b5000 0x0 0x3020d48 0x1d000)
    0x13bcbf78 : 0x19c5c6 (0x12ce708 0x174b5000 0x0 0x3)
    0x13bcbfd8 : 0x197bbb (0x2dd43b8 0x2dd43b8 0x1d000 0x20) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb0220298
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Thu Oct 12 09:11:48 2006
    panic(cpu 0 caller 0x0019CADF): Unresolved kernel trap (CPU 0, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x00000020, CR3: 0x00db6000, CR4: 0x000006e0
    EAX: 0x00000001, EBX: 0x00035000, ECX: 0x02de2140, EDX: 0x02957c00
    ESP: 0x00000020, EBP: 0x13e03e28, ESI: 0x00000000, EDI: 0x02957c00
    EFL: 0x00010293, EIP: 0x00160c37, CS: 0x00000008, DS: 0x13e00010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13e03c78 : 0x128b5e (0x3bc46c 0x13e03c9c 0x131bbc 0x0)
    0x13e03cb8 : 0x19cadf (0x3c18e4 0x0 0xe 0x3c169c)
    0x13e03d68 : 0x197c7d (0x13e03d7c 0x13e03e28 0x160c37 0x150048)
    0x13e03d74 : 0x160c37 (0x150048 0x2950010 0x60010 0x13e00010)
    0x13e03e28 : 0x161338 (0x35000 0x0 0x26522a8 0x35000)
    0x13e03f78 : 0x19c5c6 (0x2c66f9c 0x35000 0x0 0x5)
    0x13e03fd8 : 0x197bbb (0x2de23b8 0x2de23b8 0x35000 0x20) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffffc78
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Sun Oct 15 21:58:18 2006
    panic(cpu 0 caller 0x00190357): pmapflushtlbs() timeout pmap=0x49a680 cpustosignal=0x2
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13b9b3a8 : 0x128b5e (0x3bc46c 0x13b9b3cc 0x131bbc 0x0)
    0x13b9b3e8 : 0x190357 (0x3bf6b0 0x49a680 0x2 0x19caf2)
    0x13b9b438 : 0x191d42 (0x49a680 0x1df41000 0x0 0x0)
    0x13b9b488 : 0x173ef8 (0x8c16 0x0 0x2 0x0)
    0x13b9b518 : 0x1683ac (0x3214880 0x0 0x0 0x1000)
    0x13b9b608 : 0x1688db (0x1df42000 0x0 0x0 0x0)
    0x13b9b648 : 0x18348b (0x12ddb54 0x1df41000 0x0 0x1df42000)
    0x13b9b678 : 0x395f11 (0x12ddb54 0x1df41000 0x1000 0x1000)
    0x13b9b6b8 : 0x396bf1 (0x2ccde00 0x12ddf3c 0x1df41000 0x1000)
    0x13b9b6e8 : 0x396cd1 (0x247f440 0x2adf800 0x1df41000 0x0)
    0x13b9b708 : 0x396ca8 (0x247f440 0x0 0x2 0x400)
    0x13b9b728 : 0x3af24d (0x247f440 0x0 0x0 0x806000)
    0x13b9b748 : 0x5dbc2f (0x247f440 0x2d73a00 0x0 0x40)
    0x13b9b7a8 : 0x5ddcd0 (0x2adf800 0x2d73a00 0x1 0x130)
    0x13b9bc88 : 0x5c28ab (0x2adf800 0x13b9bcf0 0x0 0x0)
    0x13b9bd18 : 0x3a1e39 (0x2adf800 0x1 0x13b9bd4c 0x13b9bd48) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeonX1000(4.3.2)@0x5ba000
    dependency: com.apple.iokit.IOPCIFamily(2.0)@0x581000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.3)@0x590000
    dependency: com.apple.iokit.IONDRVSupport(1.4.3)@0x5ab000
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Sun Oct 15 22:15:24 2006
    panic(cpu 0 caller 0x00190357): pmapflushtlbs() timeout pmap=0x49a680 cpustosignal=0x2
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13d4b3a8 : 0x128b5e (0x3bc46c 0x13d4b3cc 0x131bbc 0x0)
    0x13d4b3e8 : 0x190357 (0x3bf6b0 0x49a680 0x2 0x19caf2)
    0x13d4b438 : 0x191d42 (0x49a680 0x1e125000 0x0 0x0)
    0x13d4b488 : 0x173ef8 (0x1c744 0x0 0x2 0x0)
    0x13d4b518 : 0x1683ac (0x31c8ee0 0x0 0x0 0x1000)
    0x13d4b608 : 0x1688db (0x1e126000 0x0 0x0 0x0)
    0x13d4b648 : 0x18348b (0x12ddb54 0x1e125000 0x0 0x1e126000)
    0x13d4b678 : 0x395f11 (0x12ddb54 0x1e125000 0x1000 0x1000)
    0x13d4b6b8 : 0x396bf1 (0x2c3e300 0x12ddf3c 0x1e125000 0x1000)
    0x13d4b6e8 : 0x396cd1 (0x28527c0 0x2ab4000 0x1e125000 0x0)
    0x13d4b708 : 0x396ca8 (0x28527c0 0x0 0x2 0x0)
    0x13d4b728 : 0x3af24d (0x28527c0 0x0 0x0 0x13cb000)
    0x13d4b748 : 0x5dbc2f (0x28527c0 0x2c64280 0x0 0x40)
    0x13d4b7a8 : 0x5ddcd0 (0x2ab4000 0x2c64280 0x1 0x388)
    0x13d4bc88 : 0x5c28ab (0x2ab4000 0x13d4bcf0 0x0 0x0)
    0x13d4bd18 : 0x3a1e39 (0x2ab4000 0x1 0x13d4bd4c 0x13d4bd48) Backtrace continues...
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.ATIRadeonX1000(4.3.2)@0x5ba000
    dependency: com.apple.iokit.IOPCIFamily(2.0)@0x581000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.3)@0x590000
    dependency: com.apple.iokit.IONDRVSupport(1.4.3)@0x5ab000
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Sun Oct 15 22:34:06 2006
    panic(cpu 1 caller 0x00190357): pmapflushtlbs() timeout pmap=0x49a680 cpustosignal=0x1
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x145eba98 : 0x128b5e (0x3bc46c 0x145ebabc 0x131bbc 0x0)
    0x145ebad8 : 0x190357 (0x3bf6b0 0x49a680 0x1 0x18fb36)
    0x145ebb28 : 0x191f7e (0x49a680 0x2a625000 0xfe953128 0xfe953130)
    0x145ebb78 : 0x1683e1 (0x49a680 0x2a625000 0x0 0x2a626000)
    0x145ebc68 : 0x1688db (0x2a626000 0x0 0x1 0x0)
    0x145ebca8 : 0x163511 (0x1b72f3c 0x2a625000 0x0 0x2a626000)
    0x145ebcd8 : 0x3b4ea8 (0x1b72f3c 0x2a625000 0x1000 0x0)
    0x145ebcf8 : 0x3af17c (0x33fe1c0 0x0 0x1 0x3b659b)
    0x145ebd18 : 0x3af24d (0x33fe1c0 0x0 0x3568ac0 0x41)
    0x145ebd38 : 0x3a550c (0x33fe1c0 0x2a625000 0x0 0x41)
    0x145ebd98 : 0x1894c5 (0x3049f00 0x380d1bc 0x2e454b4 0x2e454c8)
    0x145ebdd8 : 0x12b389 (0x380d194 0x2e45498 0x0 0x0)
    0x145ebe18 : 0x124902 (0x380d100 0x0 0x38 0x145ebefc)
    0x145ebf28 : 0x193034 (0x145ebf54 0x0 0x0 0x0)
    0x145ebfd8 : 0x19814b (0x2eb9318 0x2eb9318 0x134aec 0x145ebfe4) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff6c8
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Sun Oct 15 23:00:55 2006
    panic(cpu 0 caller 0x00190357): pmapflushtlbs() timeout pmap=0x49a680 cpustosignal=0x2
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13d3b568 : 0x128b5e (0x3bc46c 0x13d3b58c 0x131bbc 0x0)
    0x13d3b5a8 : 0x190357 (0x3bf6b0 0x49a680 0x2 0x18fb36)
    0x13d3b5f8 : 0x191f7e (0x49a680 0x29cf3000 0xfe94e798 0xfe94e7a8)
    0x13d3b648 : 0x1683e1 (0x49a680 0x29cf3000 0x0 0x29cf5000)
    0x13d3b738 : 0x1688db (0x29cf5000 0x0 0x1 0x0)
    0x13d3b778 : 0x163511 (0x12a0f3c 0x29cf3000 0x0 0x29cf5000)
    0x13d3b7a8 : 0x1b5f7a (0x12a0f3c 0x29cf3000 0x2000 0x19caf2)
    0x13d3b818 : 0x1b642d (0x2598e70 0x2000 0x13d3b848 0x2e666e)
    0x13d3b8a8 : 0x1b6862 (0x2598e70 0x2f58 0x0 0x2000)
    0x13d3b8e8 : 0x1b6ac1 (0x2000 0x0 0x0 0x10)
    0x13d3b908 : 0x2e01cc (0x2598e70 0x2f58 0x0 0x2000)
    0x13d3b978 : 0x309c76 (0x2598e70 0x2f58 0x0 0x13d3b9dc)
    0x13d3b998 : 0x30aa29 (0x25a5984 0x2f58 0x13d3b9dc 0x13d3b9f8)
    0x13d3ba18 : 0x308502 (0x25a5984 0x2b9882c 0x13d3ba44 0x13d3bae0)
    0x13d3bb08 : 0x2e3e58 (0x25edee0 0x2b98810 0x0 0x0)
    0x13d3bca8 : 0x30052b (0x256c404 0x1 0x2655da4 0x13d3bf04) Backtrace continues...
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Mon Oct 16 06:32:23 2006
    panic(cpu 1 caller 0x00190357): pmapflushtlbs() timeout pmap=0x49a680 cpustosignal=0x1
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13d93a98 : 0x128b5e (0x3bc46c 0x13d93abc 0x131bbc 0x0)
    0x13d93ad8 : 0x190357 (0x3bf6b0 0x49a680 0x1 0x18fb36)
    0x13d93b28 : 0x191f7e (0x49a680 0x400e4000 0xfea00720 0xfea00728)
    0x13d93b78 : 0x1683e1 (0x49a680 0x400e4000 0x0 0x400e5000)
    0x13d93c68 : 0x1688db (0x400e5000 0x0 0x1 0x0)
    0x13d93ca8 : 0x163511 (0x12a9f3c 0x400e4000 0x0 0x400e5000)
    0x13d93cd8 : 0x3b4ea8 (0x12a9f3c 0x400e4000 0x1000 0x0)
    0x13d93cf8 : 0x3af17c (0x2690c80 0x0 0x1 0x3aff5d)
    0x13d93d18 : 0x3af24d (0x2690c80 0x0 0x13d93d68 0x17)
    0x13d93d38 : 0x3a550c (0x2690c80 0x400e4000 0x0 0x17)
    0x13d93d98 : 0x1894c5 (0x23e2de0 0x29587bc 0x2958db4 0x2958dc8)
    0x13d93dd8 : 0x12b389 (0x2958794 0x2958d98 0x0 0x0)
    0x13d93e18 : 0x124902 (0x2958700 0x0 0x38 0x13d93efc)
    0x13d93f28 : 0x193034 (0x13d93f54 0x0 0x0 0x0)
    0x13d93fd8 : 0x19814b (0x23dbf90 0x23dbf90 0x23ef3000 0x13d93b8c) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff688
    Kernel version:
    Darwin Kernel Version 8.7.1: Wed Jun 7 16:19:56 PDT 2006; root:xnu-792.9.72.obj~2/RELEASE_I386
    Mon Oct 16 16:46:10 2006
    panic(cpu 0 caller 0x001914A1): pmapflushtlbs() timeout pmap=0x4af700 cpustosignal=0x2
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x13ecbb58 : 0x128d1f (0x3c9540 0x13ecbb7c 0x131df4 0x0)
    0x13ecbb98 : 0x1914a1 (0x3cc740 0x4af700 0x2 0x19065d)
    0x13ecbc08 : 0x1937d4 (0xfe9ffda0 0xfe9ffdb0 0x0 0x19a3a6)
    0x13ecbc58 : 0x165355 (0x4af700 0x3ffb4000 0x0 0x3ffb6000)
    0x13ecbd48 : 0x165b09 (0x3ffb6000 0x0 0x1 0x0)
    0x13ecbd88 : 0x162e18 (0x12c5f3c 0x3ffb4000 0x0 0x3ffb6000)
    0x13ecbdb8 : 0x15c252 (0x12c5f3c 0x3ffb4000 0x141c 0x0)
    0x13ecbdf8 : 0x160c5b (0x2c8e600 0x0 0x2dd7e58 0x6f000)
    0x13ecbf48 : 0x1a33a8 (0x2c2d658 0xb01f3000 0x0 0x3)
    0x13ecbfc8 : 0x19a804 (0x2d06c9c 0x1 0x19d0b5 0x2d06080) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xb01f42f8
    Kernel version:
    Darwin Kernel Version 8.8.1: Mon Sep 25 19:42:00 PDT 2006; root:xnu-792.13.8.obj~1/RELEASE_I386
    I

    Got panic with brand new MacBook Pro Core 2 Duo:
    Machine Model: MacBookPro2,2
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP22.00A5.B00
    SMC Version: 1.12f5
    Panic details:
    Sun Dec 10 22:14:35 2006
    panic(cpu 1 caller 0x001A3135): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
    CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00f25000, CR4: 0x000006e0
    EAX: 0x00000007, EBX: 0x23770308, ECX: 0x00000000, EDX: 0x00000010
    CR2: 0x00000000, EBP: 0x2543b688, ESI: 0x23770d74, EDI: 0x00000000
    EFL: 0x00010202, EIP: 0x00a0dd80, CS: 0x00000008, DS: 0x00000010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x2543b448 : 0x128d08 (0x3c9afc 0x2543b46c 0x131de5 0x0)
    0x2543b488 : 0x1a3135 (0x3cf7b0 0x1 0xe 0x3cefe0)
    0x2543b598 : 0x19a904 (0x2543b5b0 0x23770308 0x2543b5e8 0x127e77)
    0x2543b688 : 0xa0df71 (0x23770d74 0x23770308 0x2543b7e8 0x0)
    0x2543b6a8 : 0xa0e231 (0x23907004 0xc0a00071 0x40 0x0)
    0x2543b808 : 0xa1e4f1 (0x23770308 0x1 0x2543b838 0x3bbd7c)
    0x2543b858 : 0x9d858e (0x23770000 0x3e8ce00 0x2543b8ac 0x2543b898)
    0x2543bc98 : 0x399892 (0x23770000 0xc 0x4999ec1 0x0)
    0x2543bcd8 : 0x9d6e84 (0x3d34340 0x9d7aae 0xc 0x4999ec1)
    0x2543bd18 : 0x3b0db0 (0x23770000 0xc 0x4999ec1 0x0)
    0x2543bd68 : 0x18a18e (0x416bb00 0x0 0x4999ec0 0x5)
    0x2543bdb8 : 0x12b4c3 (0x4999e98 0x453056c 0x0 0x0)
    0x2543bdf8 : 0x124b17 (0x4999e00 0x0 0x34 0x2543bedc)
    0x2543bf08 : 0x1955a8 (0x2543bf44 0x0 0x0 0x0)
    0x2543bfc8 : 0x19ad7e (0x3e69b20 0x0 0x10 0x3894c00) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbfffe278
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AirPortAtheros(210.8)@0x9ea000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x6c1000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x59b000
    dependency: com.apple.iokit.IO80211Family(140.4)@0x9ce000
    com.apple.iokit.IO80211Family(140.4)@0x9ce000
    dependency: com.apple.iokit.IONetworkingFamily(1.5.1)@0x6c1000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x59b000
    Kernel version:
    Darwin Kernel Version 8.8.2: Thu Sep 28 20:43:26 PDT 2006; root:xnu-792.14.14.obj~1/RELEASE_I386
    No updates available for this machine, so I'm not sure what to do. Panic never occurs at home, only at work. And only after moving to a new office. The big difference is that I many more WLANs at the new location. Perhaps its the amount of them, or one specific that the AirPort cannot handle properly. Waiting for apple patch ....
    MacBook Pro   Mac OS X (10.4.8)  

  • Photoshop cs 6 freezes with openGL every 4 minutes

    I have a new Imac "3,5 GHz Intel Core i7" and working with photoshop cs6, on a new installed mac.
    When I turn OPENGL on, what ever possible way , normal , basic advantaged. It freezes my keyboard.
    So when I'm brushing I can't switch  whit x to turn back and foreground color, or reduce en enlarge the brush size.
    I only have to switch manual between my tools and then it works again, until the next 3 or 4 minutes.
    But When I turn the OpenGl options OFF (and restart the program.) It works????
    O, and Yes I followed the :
    Photoshop: Basic Troubleshooting steps to fix most issues
    But it slit is there.
    HELP
    When I use an older Photoshop it works fine.

    Sorry... I messed up... I switched to CC (I still have PS CS6 on the brain)... I should have said... After installing PS CC it was working fine and I then Powered Down & went to bed... & powered up the next morning and now PS-CC freezes after it opens up.

  • TS5181 My itunes radio stops every 30 minutes. I have itunes match, so I no longer get commercials, but it still stops at exactly 30 minutes whether I interact with songs (selecting favorites) or not.

    Why is my itunes radio on my updated iphone4s stopping every 30 minutes, whether I interact with station or not?

    Talked to Apple, probelm is solved. With the latest update no limits in number of hours.
    Tested it - and it works!

  • I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad).   Also, I'm having issues with my Ipad turning off about every 2 minutes so I want to restore it.  Dont want to lose my files from my iPad.

    Actually I have 2 problems:  I cant find my pdf/ibooks on computer after backing up my iPad (they are on my iPad).  I looked under Ipad, I Books, PDFs, and it doesn't show them on the computer. How do I manually transfer these files?
    Also, I'm having issues with my Ipad turning off about every 2 minutes, and I want to restore it.  I want to make sure all of the files are backed up before I restore.  My trouble started when I was trying to update my IPad but it was taking too long (internet was scetchy) so I powered off...now Im having problems.  I haven't tried to update again since this problem. Any suggestions?  Should I restore? Should I update to 7.0.6?  (currently 7.0.3).
    Thanks,

    Try here:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer

  • TS3276 I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem. Please help!

    I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

    I sent out a mass mailing to my various groups and the Yahoo accounts have been getting bombarded with the same message every 2 minutes and I don't know haow to stop the hemmoraging. Non of my other contacts had this problem, just Yahoo. Can someone help me get out of this nightmare?

  • When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please

    When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please

    If your iPad was work provided there may be options that they locked out. For example, a privately owned device can be set to never auto lock (last I knew anyway) but it's not uncommon for work or school provided devices to not have the 'never' option.

  • Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

    Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

    SOLVED!!!!!
    SO I did some more digging around and read ATI cards seem to overheat easily.  I knew the fan was working, but after closer inspection I realised there was ALOT of built up dust on the card and clogging the fan and airflow.  Blew it out with alot of compressed air, stuck it back in the Mac and BAM...no black screens.  I tested it by streaming 6 video sources...doing 2 screen captures at once as well as watching a HD movie in fullscreen.  Did all this for 30 minutes and no crashes.  I also downloaded an app to monitor the temps inside the computer and the expansion bay stays at 41 degrees.  No clue what it was before but obviously it was hotter than that.  So my problem is solved!  Funny that 10.7.5 made the card work harder.  I wonder if its off loading some CPU stuff to the GPU for processing more than 10.7.4 so its just working a bit harder and so it heats up faster....

  • Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do!

    Every ten minutes a popup on my 4s appears saying "unable to download" with the option of "done" or "retry". I can't get rid of it and I can't find out what it's trying to do! theres noting pending on the App Store or iTunes. Nothing failed. I've reset my settings. Logged out and back into itunes. It's really annoying as rinsing my data!

    After talking to Apple for 3 hours I figured it out myself.
    Tre here was a singular failed song on iTunes on the computer that was trying to download and messing everything up. Maybe if you use iTunes on the computer and have a little mooch you'll find the same thing. I think it was hidden in the purchased part of it

  • Browser is freezing every few minutes with facebook and not on other browsers, please help! i love mozilla, can't switch :)

    hey guys,
    im a devoted user of mozilla but lately whenever i open my facebook (or other sites with lots of adds) it freezes for like a minute, every few minutes.
    I didn't have this problem when I used explorer nor when doing it on other computers.
    so i bet the problem is with my computer but I can't figure out what.. :(
    please help me! I hate all other browsers!
    p.s. u guys rock :)

    Are you playing Frontierville or Cityville or somesuch? Zynga games are HUGE resource hogs and if you try to pair them with Pandora or YouTube, things can go down really fast. You can also mitigate a little with an adblocker like [https://addons.mozilla.org/en-US/firefox/addon/1865/ adblock plus].
    From reports of this that I've been hearing about, Flash 10.2 (which was a recent update) has been particularly bad with Zynga games. You can try changing your display settings in Flash (right click and select settings and then the first tab) but I would just suggest using just one game at a time. Adobe may be releasing a version of Flash that's better soon, so this may clear up if you update Flash, also.

  • Playback problems every few minutes (with synced media)

    Every few minutes during playback of synced content there are pauses that last about a second or two. This happens with both video and music. Maybe a hard disk failure?

    Unfortunately your posting doesn't offer any relevant info and it is not easy to say why this happen.
    We dont know what have you dont in the past, which additional applications do you use and how your OS is configured.
    Try to start clean-up action and remove all useless stuff from your notebook. Check also all start-up options and disable automatic start for all applications that you dont need.
    Start with such simple steps. If the problem occurs again and again maybe is time for clean OS installation.
    Sorry but it is not easy to say what the problem can be.

  • How can I Refresh the DashBords for every 5 minutes with latest data

    Hi,
    Here we are Using the DashBoards which are accessing the data from SSAS Data bases to the DashBoards.
    From Dash Boards page, we have to refresh the Dash Boards for the latest Data for every 5 minutes.
    can any body provide the solution for this.
    Thanks,
    Supraja.
    SUPRAJA'S

    Hi Tom,
    sorry for late response.
    i have Analysis services(AS) Data base. which is configured with ROLAP settings in SSAS.
    we are showing this AS Database Information in Dash boards.
    once we open the dash board, it will shows the latest information in dash boards obviously. 
    but, Mean while if any changes occured in AS data base, if we want to get that changes in dash boards we have to refresh the dash board (OR) we have to close & reopen the same dash board.
    apart from this if is there any other solutions technically,  Please suggest me.
    Thanks,
    SUPRAJA'S

  • I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    Hi,
    From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
    Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
    http://support2.microsoft.com/kb/2997209
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Why is Firefox getting WORSE with each new version? The new version eleven crashes my PC about every 15 minutes! Back to I.E.!

    The new version 11 crashes my entire PC causing a total restart about every 15 minutes and I have tried everything to fix this problem with no luck so I have now went back to I.E. aat least it doesnt crash and i can watch Youtube vids without hanging up every 30 seconds!
    Each new version of Firefox seems to be WORSE than the one before, crashing my entire system is my biggest issue at this point! Some of the older versions seemed stable so what and why has the developers tptally ruined this browser? I am not the only person with these problems I see forums full of users complaining so why isnt the developers putting out a stable browser?
    Firefox needs to GET ON THE BALL and get a stable browser out for all of its lowal users this is totally rediculous! I am VERY PISSED OFF!

    Whatever you do, don't get version 12 because it's just as bad as the rest. Not responding, not responding is what I see most of the time. I'm tired of looking at that blue circle spinning.
    I thought Firefox is suppose to be tops but I've had more problems with it than I had with IE. It literally takes minutes for some pages to load. Tabs and pages open by themselves from who knows where.
    The updates and new versions go from bad to worse. I scan my computer several times a week with MSE, Malwarebytes, Spybot and SuperAntispyware, thinking that it might help and it doesn't.
    This is pathetic. Firefox, please get someone in there who knows what the heck they are doing. It seems like instead of bug fixes, someone's putting in some bugs.
    No one should have to repeatedly do this:
    1. Restart your computer
    2. Clear your cookies and cache
    3. Update your plugins
    4. Restart Firefox in Safe Mode
    5. Troubleshoot your plugins
    6. Reset your Firefox settings
    7. Reinstall Firefox
    8. Make a new profile
    Other solutions
    Check for conflicts with your Internet security software
    Scan your system for viruses and spyware
    Check your hard drive for errors

  • I got the following every 10 minutes: enter password. I enter my password and it say it is incorrect. I log into iCloud with it...

    I got the following every 10 minutes. I enter my password and it say it is incorrect. I log into iCloud OK with that password.

    where did you get this phone from

Maybe you are looking for

  • Why we maintain Partner Profiles in WE20??

    HI, What is the affect of entries in the following T-codes: And the following are the entries maintained for respective T-CODEs, in our project. OBCA: ( LOGICAL SYSTEM - SYSTEM - CUSTOMER - CUSTOMER COMPANY CODE)  OBCE: (LOGICAL SYSTEM - SYSTEM - CUS

  • BREW LG Dare (9700)

    hi all. this is my first post. I have been developing in Flash for a long time now, and am brand new to the mobile device realm. I recently purchased the LG Dare and was stoked to find out it supported flash through the brew platform. But then quickl

  • Oracle Golden Gate - Extract DDL only

    Hi.  We are working on a golden gate proof of concept.  The way our configuration is set up, we want to pull changes from our standby to keep load low on the primary.  This will require us to extract ddl changes from the primary, so my current plan i

  • PROJECT SYSTEM :No error message while doing TECO(TECHNICALLY COMPLETED)

    When we do technically completed for an activity in PROJECT SYSTEM ,system should give an error message if there are any production order for which materials are yet to be received. Can any one tell me how to do it.

  • Can´t find HP Printer Assistant

    HP Deskjet 1050A J410 with Win 8.1 Have tried numerous suggestions from various sources but I cannot get Printer Assistant to open. I cannot even find it on my computer eg .exe file. Have deleted HP software and re-installed with different combinatio