Association time limit

Is it possible to limit the association time for one user/mac address over a 24 hour period? Client has a hot-spot and wants to make sure it is not abused.
Current system:
wlc 4402, 5.2.193.0
Thanks in advance for the help.

OK, a bright colleague has this idea.
Configure L2 Security MAC Filtering via RADIUS
The RADIUS server keeps a simple table of unique macaddr requests for the day. For each request:
if macaddr not found
    insert macaddr
    send radius accept with attribute 27 session-timeout set to x seconds
else
    send radius reject
fi
at midnight clear the table ready for the next day
I need to work it through.
Hopefully I can combine the L3 passthru page to force a branded Acceptable Use Policy. Also would be nice to gracefully disassociate when the session timer expires. Need to look into session logout page - I'm not that confident that a graceful/polite exit will be possible but will see whats there. Would also be nice if the auth reject could somehow be made informative with a polite message saying the meter has run out.
Anyone have any ideas to add, I'd be most grateful for the post.
Thanks, Graeme
EDIT: I wonder if RADIUS Attribute 18 Reply-Message "Text that the user will see" can be used to send back informative reject reasons. Then again the client is on an open network and anyway it probably depends heavily on the functionality of the client wifi driver/stack.
"Edited to try and fix whacky text formatting"

Similar Messages

Error while executing a report : Time limit exceeded

Hello Experts,
i have executed a report and it took long time and finally throw an error saying that time limit is exceeded ,
please suggest how to resolve the problem
Thanks in Advance
Nitya

Hi Nitya H,
There are many resons behind Time out issue.
It is better to find where exaclty, our report is taking more time.
Below are the some of the bottle necks we need to monitor for time out issue:
1) OLAP query generation time.
2) F4 Search time.
3) Read Cache.
4) Write Cache.
Above features we can monitor @ RSRT transaction.
If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
For F4 search ,keep mater data as data retrival target.
For Read Cache and Write Cache increase the query memory @ RSRT.
Plse check the report and let me know if there is other bottle necks for query execution....
_Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
Hope this may helps you...
Cheers,
Maruthi

RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded. Connection Pool - JCO api

Hi Everyone
My Connection Pool parameters JCO api.
client=300
user=SISGERAL_RFC
passwd=******
ashost=14.29.3.120
sysnr=00
size=10
I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
1.
2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
2.
2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
Id like to know if is happening.
Are there something wrong with my connection pool?
What can be happening?
Thanks

Raghu,
Thanks for your response.
Yes, the pool connections are in place according to the sAP note mentioned above.
Regards,
Faisal

How can I get back the 15 minute time limit when making an iTunes purchase with out having to put in password again and again?

HHow can I get the 15 minute time limit back instead of putting in iTunes password on every purchase?

Settings > General > Restrictions > Require Password (Password Settings on iOS 8)

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Error while running query "time limit exceeding"

while running a query getting error "time limit exceeding".plz help.

hi devi,
use the following links
queries taking long time to run
Query taking too long
with hopes
Raja Singh

TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.

Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas

Time Limit exceeded while running in RSA3

Hi BW Experts,
I am trying to pull 1 lakh data from CRM to BI System.
Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
Pls suggest, why it is happening like this.
Thanks in advance.
Thanks,
Ram.

Hi,
because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a time then u can discuss with ur basis people to extend the time for that.
Thanks & Regards
sathish

Time limit exceeded error

Hello All,
I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
Regards,
Arpita.
Moderator message: Welcome to SCN!
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 20, 2011 2:01 PM

Hi Ramya,
Your prog running in the back ground, so the time limit of the prog is exceded. Go to sm37 see the prog running time if exceded correct the time.
Regards
Srinu

Time Limit exceeded error in R & R queue

Hi,
We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
Any pointers on this would be of great help.
Thanks in advance,
Regards,
Rasmi.

Hi Rasmi
I suppose that the usual answer would be to increase the timeout for the R&R queue.
We have increased the timeout on ours to 60 mins and that takes care of just about everything.
The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time
If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
Regards
James

Time Limit exceeded error in ALV report

I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag.

Time Limit Exceeded while executing Proxy Program

Hi all,
we are frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
Thanks,
Mayank

hi Joerg,
we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
Thanks,
Mayank

Time Limit exceeded Error while updating huge number of records in MARC

Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender
Hi experts,
I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
as we want to update.
Below is the part of code in my proxy
Call the BAPI update the safety stock Value.
    CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
      EXPORTING
        headdata                    = gs_headdata
        CLIENTDATA                  =
        CLIENTDATAX                 =
       plantdata                   = gs_plantdata
       plantdatax                  = gs_plantdatax
       IMPORTING
          return              = ls_return.
    IF ls_return-type <> 'S'.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      MOVE ls_return-message TO lv_message.
Populate the error table and process next record.
      CALL METHOD me->populate_error
        EXPORTING
          message = lv_message.
      CONTINUE.
    ENDIF.
Can any one please let me know what could be the best possible approach for this issue.
Thanks in Advance,
Jitender

Hi Raju,
Use the following routine to get fiscal year/period using calday.
*Data definition:
DATA: l_Arg1 TYPE RSFISCPER ,
      l_Arg2 TYPE RSFO_DATE ,
      l_Arg3 TYPE T009B-PERIV .
*Calculation:
l_Arg2 = TRAN_STRUCTURE-POST_DATE. (<b> This is the date that u have to give</b>)
l_Arg3 = 'V3'.
CALL METHOD CL_RSAR_FUNCTION=>DATE_FISCPER(
EXPORTING I_DATE = l_Arg2
            I_PER = l_Arg3
IMPORTING E_FISCPER = l_Arg1 ).
RESULT = l_Arg1 .
Hope it will sove ur problem....!
Please Assign points.......
Best Regards,
SG

Can I set a time limit for usage on a 5th gen ipod touch

My daughter just got a 5th gen Ipod touch. Of course she is using it at times she shouldn't be. Is there a way to set a time limit for usage so she can be responsible for monitoring herself without us nagging all the time?

IIt's free and here is a link https://itunes.apple.com/gb/app/parentkit-parental-controls/id600618138?mt=8

I think there should be a time limit of 2 years to the icloud find my device. Then it should reset.

So many people have locked devices that they bought on eBay. I think apple should have a time limit of 2 years then it should rest back to factory settings with no Icloud attached.
Thus if you have got scammed there is hope for you. All you have to do is wait the 2 years or 1 year before your device becomes useable when they do a full reset of all old devices.
Also it helps people keep up to date on there icloud. A lot of people forget what email and password they made for there apple id.
Thus they can put in there new email and password.

I doubt that the people who have had their device stolen would agree. This is a user-to-user support forum but you can make a suggestion to Apple at: https://www.apple.com/feedback/icloud.html

Association time limit

Similar Messages

Maybe you are looking for