Astericks appearing in place of a particular value in basic list ????

Hello,
I am outputting values thru a basic list, but the system is outputting ' *********** ' (Astericks) in place of the value. I have increased the length while outputtin on a basic list but to no avail. What can be the reason?
Thanks,
Shehryar Dahar

hi,
check whther both field type are identical..check for type..
thanks
jaideep
*reward points for useful answers..

Similar Messages

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

How to use parsing technique to access a particular value from a webpage

hi,
i'm in need of a coding to access a particular value from a webpage only by using its link. one of my friend said the we can do this by parsing technique. but i doesn't have knowledge about it. can any one help me?

ksnagendran26 wrote:
hi,
i'm in need of a coding to access a particular value from a webpage only by using its link. one of my friend said the we can do this by parsing technique. but i doesn't have knowledge about it. can any one help me?I'm sorry could you explain in detail what do you mean by +"access a particular value from a webpage only by using its link"+?

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

Counting rows with a particular value

Hello. I recently posted this thread Count java problem for how to count an attribute.
Now I need that count to be limited to a certain value inside the attribute.
let me clarify. I have a table Casinos, which is connected to a table SlotsInCasinos, which is further connected to SlotMachines in a many to many with SlotsInCasinos being the intersection.
The previous post that I mentioned (thanks Timo by the way) told me how to count all the slots in a particular casino.
Now I would like to know how I could count all the slots of a particular value (for example Poker slot Machines, regular Slot machines, etc) instead of the total count in a particular object.
So on the page I would have lets say 2 output texts, one showing the number of Poker Slot Machines in that particular casino and the other showing the number of regular Slot machines in that particular casino (a third could show the number of some third kind of slot machines).
Thank you for your time

Hello everyone here is an update
I created a view object called Test, based on the entity object SlotMachinesInCasino. I then created a view link TestLink and created a master detail relationship (the same one I already had for the View Object SlotMachinesCasinosVO.
The difference is in the query for test I put the following
SELECT
    VezaTehOpTipAp.OBJEKAT_ID,
    VezaTehOpTipAp.TIP_APARATA_ID,
    VezaTehOpTipAp.VEZA_TEH_OP_TIP_AP_ID,
    TIPOVI_APARATA.NAZIV_APARATA NAZIV_APARATA
FROM
    VEZA_TEH_OP_TIP_AP VezaTehOpTipAp,
    TIPOVI_APARATA
WHERE
    TIPOVI_APARATA.NAZIV_APARATA = 'Evona'My thinking was that if I do this the estimated row count function for this will just give me the number of Evona Game machines. I tried it out in an SQL Worksheet and it gives back only the Evona machines.
Unfortunately when I create the TestIterator and then drop output text whose EL is the estimated row count for the test iterator it does not work as intended. It counts all the Slot Machines in the Object no matter the Name.
So it gives a number equal to all the slot machines instead of to the number of slot machines with name 'Evona'.
What did I do wrong?

Consult a Lookup in a particular value from a reconciliation

Hello everybody ...
I need to find a method (tcLookupOperationsntf) that searches a Lookup a certain value (string). For example, I have several records in a Lookup as follows OU=pp_99123,OU=PE,DC=domain,DC=net , I contain only the number 99123 which is a unique identifier. I need that number by 99,123, I return the full amount coming from the Lookup OU=pp_99123,OU=PE,DC=domain,DC=net. It would be a research method, but I can not find. Does anyone know answer me?
Thank you in advance

Hi Sam,
You cannot do this directly as exclusion, but you can include all other values, even as ranges and thus exclude the particular value, else you can also try to do this by writing a routine.
Hope this helps...

Query not executing for one particular value

Hi
I have query on multi provider. and this multi provider is combination of Info objects only but not any ODS or cubes. I have one key figure in this multi provider.while executing the query i need to give input for variabl which has 7 different values. Query is executing fine for 6 values but not for one particular value.
query executed in listcube transaction and it is executed fine here for the same selection. then what might be the reason?
Please advise as soon as possible.
Thanks

Hi Kiran,
are you maintaining any filters in the query? or is there any logic in the exit for this variable.
regards.

Stop a dimensional drill for a particular value of a column in obiee 11g

Hi,
I have dimensional drill been setup for Supervisor Hierarchy Table.I need to stop the dimensional drill for a particular value of the column in obiee 11g.
Example: I have two columns
1.Supervisor Level 1 Name
2.Supervisor Level 2 Name
Supervisor Level 1 Name Columns have these values.(Ram,Higher,Sam)
Supervisor Level 2 Name Columns have these values.(Ravi,Higher,Raghul).
If we pull Supervisor Level 1 Name Column in report which has a dimensional drill(It will navigate to Supervisor Level 2 Name).It will show
1.Ram
2.Higher
3.Sam
I should not drill on Higher value but the rest of the values(Sam and Ram will drill to Supervisor Level 2 Name) should be drillable.The same should happen for Supervisor Level 2 Name.
Please Suggest.
Thanks,
Azim

Azim,
Don't think you can actually get this working

Retriving data from database on selecting particular value in the combo box

Hi,
On selecting the particular value from the combo box, the corresponding value of the other segement fields should be retrived from databse and displayed in the text box

Babel,
If you don't have a query bdoc and the business query that joins both 2 tables already, then please crate one.
After that, write this code on the change of the combobox.
You would have to change the names below for the Query, properties, anchor, parameters, controls.
===================================
Private Sub ctrlBankNameCombo_onValueChanged2(ByRef boundAttributeChanged As Boolean)
On Error Resume Next
Dim objBankQuery As BusinessQuery
Dim ObjBankCol As BusinessCollection
Dim strID As String
If Not boundAttributeChanged Then Exit Sub
strID = ""
strID = myanchor.bo.getAttribute("BankNameComboProperty") ' Bank ID
If strID <> "" Then
    Set objBankQuery = gServices.factory.newBusinessQuery("MyNewQuery")
    objBankQuery.Mandt = "000"
    objBankQuery.BANKID = strID
    Set ObjBankCol = objBankQuery.query
       If Not ObjBankCol Is Nothing Then
           ctrlBankAddress.Value = ObjBankCol.getAttribute(1, "BankAddress")
           ctrlBankPhone.Value = ObjBankCol.getAttribute(1, "BankPhone")
       End If
End If
===================================
Regards,
Vadim.

Query for Closing Stock goes beyond a particular value.

Hi,
The query for the following requirement:
The Closing Stock goes beyond a particular value. The Closing Value of items crosses the pre-defined value.

Hi,
Yes it is related to the user selected date and stock level. Not answered Closing the thread.
Edited by: Neela M B on Aug 28, 2010 3:08 PM

Question mark appearing in place of photo

Question mark appearing in place of photo. Happened after upgrading to iPhoto '11.

Question mark suggests a permissions issue. Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
Regards
TD

Identifying articles having particular value in characteristic.

Hi,
This query is related to SAP IS Retail, don't know if it is also applicable to SAP R/3.
I want to filter a list of articles having a particular value in the characteristic assigned to it.
From where can i find the linkage. (Tables)
Thank you,
regards,
Abhishek

Hi,
Check tables CABN, CAWN, KSML and KSSK.
I hope this helps you
Regards,
Eduardo

Comma appears in place of space

When I create a sentence, a comma appears in place of the space as I type, especially if I type quickly.
I think this also happens in other iPad apps.
Is there some settings change I can make that can solve this problem?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

When importing photos from my iPhone black boxes appear in place of random photos in the library and in Photostream.

When importing photos from my iPhone black boxes appear in place of random photos in the iPhoto library and in Photostream. It has no apparent pattern, the photos are just blank. It's not just icons, when I go to edit the photos externally in Photoshop it opens an image filled with nothing but black.
This is more than annoying. It's effectively deleting photos I'm taking on vacation and so forth.
Anyone?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Commas are coming in place of decimals in values

Hi,
How to correct the decimal places and commas in values.
Currently commas are coming in places of decimal and vice versa.
Regards
Gaurav Jain

Hi,
Please consult your Basis-Admin.
In T. Code: SU01
Key-in User-name for which this error is coming up and go to Change-mode.
In Tab: Defaults, there is Field: Decimal Notation.
There, Maintain: X1,234,567.89
and SAVE.
This will resolve the issue.
Best Regards,
Amit.
NOTE: Rewards, if Helpful.

Astericks appearing in place of a particular value in basic list ????

Similar Messages

Maybe you are looking for