ASU During EHP6 upgrade
Dear All,
I had upgrade our ecc 6.0 to ehp5, 1 year back , but it never ask for ASU/Upgrade step,
But Now once i am trying to upgrade to ehp6 , it is asking for /ASU/Upgrade step, Once i tried n/ASU/Upgrade/ in 000 client it is prompting me to choose task list , How to proceed with ASU step please give some steps.
RK
Dear Munish,
PF the SS as below. It is asking to do the ASU/Upgrade. .......One more thing From where i can see what will be the minimum SP of ECC 6.0 to Upgrade to Ehp6 ..
Regards
RK
Similar Messages
-
ABAP activities during EHP6 Upgrade
Hi All,
During EHP6, upgrade apart from SPDD, SPAU & UCCHECK adjustments, obsolete FMs - WS_UPLOAD, UPLOAD, WS_DOWNLOAD & DOWNLOAD should be replaced with the latest one from Z-programs.
What are the other ABAP activities & obsolete FMs that should be taken care for Z-developments in the system during EHP6 upgarde?Dear Munish,
PF the SS as below. It is asking to do the ASU/Upgrade. .......One more thing From where i can see what will be the minimum SP of ECC 6.0 to Upgrade to Ehp6 ..
Regards
RK -
SAP ERP EHP6 Upgrade cancel with no SUM Directory
hi
At last week on wednesday, we started to upgrade ERP EHP5 to EHP6 case. On Friday evening over 7:00PM we started the preprocessing step.
When phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/XPRAS_SHD_AIMMERGE step has being processing, system VM disk has got fulled, And system stopped responding. We checked all the sources, and but couldnt get windows started.
We had to restore system to another host, with Friday evening 08:00PM SQL backup.
Now this is the case, we have a SUM started database with no SUM directory. System is now usable for end-users but in some txcoedes system seems locked due to system upgrade.
When we run se38- RSUPGRES program, it has the error below.
now, how can i cancel the upgrade status without SUM directory?Hello
TP imports are not possible during that upgrade phase what is why you get the 253 and the error message. There is a dirty trick (playing with table UVERS) that allows to override that security and be able to perform import but I won't recommend using it.
I do not think that RSUPGRES could help without the SUM directory, further more it should not work with SUM (see note 417670).
I'm afraid the only solution is to recover from a backup taken before the upgrade.
I'm a bit afraid about your sentence "system is now usable for end-users", I hope that system is not productive.
Regards
417670 - Addnl information on resetting upgrade as of Release 6.10
you should not use the note for SAPehpi
1972214 - Error in Upgrade : batch job fails with this error "Log writer aborted with RC 1"
Usually the issue with "Log writer aborted with RC 1" and COULD_NOT_OPEN_FILE error, means the directories in DIR_PUT and/or DIR_TRANS cannot be accessed. -
Outbound Queue got deleted during ECC upgrade
Hi,
After ECC EHP6 Upgrade Outbound Queue in SMQ1 got deleted for data source 0F_GL_14 in ECC, but delta queue exists under RSA7.
how to re-generate outbound Queue which got deleted during Upgrade?
SanthoshHi Shantosh,
In this case, please follow the below steps -
1. Delete the delta for your info package, and do init without data transfer.
2. After this first fill your setup tables with SBIW tcode,
3. And run your Info Package with Repair full request the data will come to PSA now, anyway ur DSO will overwrite all the existing records and add only the fresh records.
4. Later enable your delta for the Info Package. This will absolutely go fine.
Thanks..!!
Regards,
Harish. K -
Upgrade fails in the phase STARTSAP_TBUPG during the upgrade of CRM 4 to 5
Hello,
Upgrade failed with the below message in the upgrade phase STARTSAP_TBUPG during the upgrade of CRM 4.0 to CRM 5.0
Error Message:
SYSTEM START failed, code -1
-1: 'startsap.exe' returned an error
See file 'D:\usr\sap\put\log\R3up.ECO' for details.
R3up.ECO:
SAPup> Starting subprocess startsap.exe with id 5844 at 20080402142258
EXECUTING D:\usr\sap\put\exe\startsap.exe name=SID nr=00 SAPDIAHOST=Hostname
Environment: dbms_type=mss
Environment: dbs_mss_schema=cdu
STARTSAP failed
Details are written to D:\usr\sap\put\tmp\startSID.log
Process with ID 6276 terminated with status -1
startSID.log
running D:\usr\sap\put\exe\sapstart.exe name=SID nr=00 SAPDIAHOST=Hostname -wait
SAPSTART finished successfully on Host_SID_00, but at least one process doesn't run correctly:
msg_server.exe, MessageServer, Running, 2008 04 02 14:22:58, 0:03:19
disp+work.exe, Dispatcher, Running, Message Server connection ok, Dialog Queue time: 0.00 sec, 2008 04 02 14:22:58, 0:03:19
igswd.exe, IGS Watchdog, Stopped, 2008 04 02 14:22:58, 0:00:00
D:\usr\sap\put\exe\sapstart.exe=>sapparam(1c): No Profile used.
It is trying to start the shadow instance and failing by ending all the work process
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid SID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 150
intno 20050900
make: multithreaded, ASCII, optimized
pid 5348
Wed Apr 02 17:22:10 2008
kernel runs with dp version 234(ext=109) (@(#) DPLIB-INT-VERSION-234)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 5348) [dpxxdisp.c 1245]
shared lib "dw_xml.dll" version 150 successfully loaded
shared lib "dw_xtc.dll" version 150 successfully loaded
shared lib "dw_stl.dll" version 150 successfully loaded
shared lib "dw_gui.dll" version 150 successfully loaded
shared lib "dw_mdm.dll" version 150 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Wed Apr 02 17:22:22 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0100.qqq.nxst) took 12 seconds
Wed Apr 02 17:22:40 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5373]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >HOSTNAME_SID_01 <
DpShMCreate: sizeof(wp_adm) 22968 (1044)
DpShMCreate: sizeof(tm_adm) 3642120 (18120)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05560040, size: 4281040)
DpShMCreate: allocated sys_adm at 05560040
DpShMCreate: allocated wp_adm at 05561B30
DpShMCreate: allocated tm_adm_list at 055674E8
DpShMCreate: allocated tm_adm at 05567518
DpShMCreate: allocated wp_ca_adm at 058E0820
DpShMCreate: allocated appc_ca_adm at 058E4E70
DpShMCreate: allocated comm_adm at 058E65E0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05967490
DpShMCreate: allocated gw_adm at 059674D0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05967500
DpShMCreate: allocated wall_adm at 05967508
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2039 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12553]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( HOSTNAME) [dpxxdisp.c 11867]
DpStartStopMsg: send start message (myname is >HOSTNAME_SID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 150
Release check o.K.
Wed Apr 02 17:23:20 2008
my types changed after wp death/restart 0x1f --> 0x1e
my types changed after wp death/restart 0x1e --> 0x1c
my types changed after wp death/restart 0x1c --> 0x18
my types changed after wp death/restart 0x18 --> 0x10
my types changed after wp death/restart 0x10 --> 0x0
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:30 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Apr 02 11:53:30 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 6916 Ended no 1 0 0
1 DIA 7724 Ended no 1 0 0
2 DIA 6044 Ended no 1 0 0
3 DIA 4300 Ended no 1 0 0
4 DIA 6992 Ended no 1 0 0
5 DIA 2412 Ended no 1 0 0
6 DIA 432 Ended no 1 0 0
7 DIA 8168 Ended no 1 0 0
8 DIA 5420 Ended no 1 0 0
9 DIA 9712 Ended no 1 0 0
10 UPD 4320 Ended no 1 0 0
11 ENQ 3476 Ended no 1 0 0
12 BTC 2676 Ended no 1 0 0
13 BTC 6816 Ended no 1 0 0
14 BTC 9636 Ended no 1 0 0
15 BTC 8356 Ended no 1 0 0
16 BTC 7004 Ended no 1 0 0
17 BTC 7284 Ended no 1 0 0
18 BTC 10048 Ended no 1 0 0
19 BTC 4560 Ended no 1 0 0
20 BTC 4196 Ended no 1 0 0
21 SPO 4268 Ended no 1 0 0
Dispatcher Queue Statistics Wed Apr 02 11:53:30 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 3, udp 3 (100%), shm 0 ( 0%)
since last update total 3, udp 3 (100%), shm 0 ( 0%)
Dump of tm_adm structure: Wed Apr 02 11:53:30 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Apr 02 11:53:30 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:35 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >HOSTNAME_SID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1860 HANDLE:1448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1477
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 02 17:23:36 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1860 HANDLE:1448)
DpStartStopMsg: send stop message (myname is >HOSTNAME_SID_01 <)
NiIMyHostName: hostname = 'HOSTNAME'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Apr 02 17:23:37 2008
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12213]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 1356 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 1356 (pos=2)
SiSelNRemove: removed sock 1356
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/22
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 9)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 1356
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5348) [dpxxdisp.c 10461]
Good Bye .....
Please help me in resolving this issue
Thanks,
VadiHi Suhas,
Have checked the hostname and it is correct.
I am getting the below output When i run r3trans -x
This is r3trans version 6.14 (release 700 - 04.03.08 - 16:43:00).
r3trans finished (0000).
I could see the below error message in dev_W21
ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'sid_shd' setuser 'sid_shd']
C sloledb.cpp [ExecuteAndFlush,line 6470]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 'cdu_shd' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'cdu_shd' failed -- connect terminated
C failed to establish conn. 0
Thanks,
Vadi -
Error during the upgrade phase "start_shdi_first"
Hello,
We are having issue with upgrading r/3 4.7 enterprise extension set to ECC 6.0
Here the error message goes....
starting system failed rc=0
to analyse the error during start of shadow instance
view files 'Startsfi.log' and 'devtrace.log'
in directory usr\..put
repeat phase until shadow instance is started
and u can logon instance no '01'"
We have changed the DDIC password during upgrade.after that we ran the initphase to update the password.
I think sapup is referring the old password which was entered initially during the upgrade and we dont remember the old password also.
Appreciate your response
Startsfi.log
1 ETQ201XEntering upgrade-phase "START_SHDI_FIRST" ("20080218175653")
2 ETQ366 Connect variables are set for shadow instance access
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Environment variables:
4 ETQ399 dbs_mss_schema=de4
4 ETQ399 auth_shadow_upgrade=1
4 ETQ399 Set environment for shadow connect:
4 ETQ399 ENV: dbs_mss_schema=de4
4 ETQ399 ENV: auth_shadow_upgrade=1
4 ETQ399 Set RFC variables for shadow connect:
4 ETQ399 System-nr = '01', GwService = 'sapgw01'
4 ETQ399 Set tool parameters for shadow connect:
4 ETQ380 computing toolpath for request "TP_SHADOW_CONNECT"
4 ETQ381 request "TP_SHADOW_CONNECT" means "tp needs to connect to shadow system"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
4 ETQ399 default TPPARAM: SHADOW.TPP
4 ETQ380 computing toolpath for request "TP_ALWAYS_NEW"
4 ETQ381 request "TP_ALWAYS_NEW" means "always tp from DIR_PUT/exe, for phase KX_SWITCH"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_NEW"
4 ETQ383 translates to path "exe"
4 ETQ383 translates to path "exe"
2 ETQ399 Starting shadow instance
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2 ETQ353 Starting system
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2 ETQ370 starting test RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "UPG_IS_SHADOW_SYSTEM" by RFC
4 ETQ359 RFC Login to: System="DE4", Nr="01", GwHost="MTW02SDEC01", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2EETQ235 Call of function module "UPG_IS_SHADOW_SYSTEM" by RFC failed (error-status "-3")
4 ETQ239 Logging off from SAP system
2WETQ372 test RFC failed, rc="-3"
2EETQ399 Starting shadow instance failed
2EETQ399 Test RFC failed finally
2EETQ399 Dialogue: ERROR
2EETQ399 Starting system failed, rc=0
DEVTRACE:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid DE4
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, ASCII, optimized
pid 2272
Mon Feb 18 16:08:40 2008
kernel runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2272) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
Mon Feb 18 16:08:52 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0065.qqq.nxst) took 12 seconds
Mon Feb 18 16:09:10 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 18 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >MTW02SDEC01_DE4_01 <
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 065C0040, size: 4241064)
DpShMCreate: allocated sys_adm at 065C0040
DpShMCreate: allocated wp_adm at 065C1B30
DpShMCreate: allocated tm_adm_list at 065C6938
DpShMCreate: allocated tm_adm at 065C6968
DpShMCreate: allocated wp_ca_adm at 06936BF8
DpShMCreate: allocated appc_ca_adm at 0693B248
DpShMCreate: allocated comm_adm at 0693C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 069BD868
DpShMCreate: allocated gw_adm at 069BD8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069BD8D8
DpShMCreate: allocated wall_adm at 069BD8E0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2046 blocks reserved for free list.
ES initialized.
WARNING => System running without ICM - check rdisp/start_icman [dpxxdisp.c 12437]
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( MTW02SDEC01) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >MTW02SDEC01_DE4_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Mon Feb 18 16:09:13 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 4724] Mon Feb 18 16:08:40 2008
[Thr 4724] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 5420
[Thr 4724] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5420) [msxxserv.c 1824]
[Thr 4724] MsInitAclInfo: acl file D:\usr\sap\put\DE4\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 4724] MsGetOwnIpAddr: my host addresses are :
[Thr 4724] 1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
[Thr 4724] 2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
[Thr 4724] MsHttpInit: full qualified hostname = MTW02SDEC01.mindsap.com
[Thr 4724] HTTP logging is switch off
[Thr 4724] MsHttpOwnDomain: own domain[1] = mindsap.com
[Thr 4724] ms/icf_info_server : deleted
[Thr 4724] *** I listen to port sapmsSHDDE4 (3601) ***
[Thr 4724] CUSTOMER KEY: >J1537289841<
trc file: "dev_rd", trc level: 1, release: "700"
Mon Feb 18 16:09:10 2008
***LOG S00=> GwInitReader, gateway started ( 2344) [gwxxrd.c 1694]
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, ASCII, optimized
pid 2344
gateway runs with dp version 229(ext=109) (@(#) DPLIB-INT-VERSION-229)
gw/local_addr : 0.0.0.0
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
Bind service sapgw01 (socket) to port 3301
GwPrintMyHostAddr: my host addresses are :
1 : [172.20.28.159] MTW02SDEC01.mindsap.com (HOSTNAME)
2 : [127.0.0.1] MTW02SDEC01.mindsap.com (LOCALHOST)
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
DpShMCreate: sizeof(wp_adm) 19976 (908)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06110040, size: 4241064)
DpShMCreate: allocated sys_adm at 06110040
DpShMCreate: allocated wp_adm at 06111B30
DpShMCreate: allocated tm_adm_list at 06116938
DpShMCreate: allocated tm_adm at 06116968
DpShMCreate: allocated appc_ca_adm at 0648B248
DpShMCreate: allocated comm_adm at 0648C9B8
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0650D868
DpShMCreate: allocated gw_adm at 0650D8A8
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0650D8D8
MtxInit: -2 0 0
Mon Feb 18 16:09:14 2008
GwDpInit: attached to gw_adm at 0650D8A8
Thanks,
VadiDear All,
The issue has been resolved by changing the DDIC password to what it was when we have started the upgrade.The password was "welcome" when we have started with upgrade after that it has been changed to
"basis05" during upgrade.we changed it back to welcome and it started working fine.
Here it took long time to find out what was the password when we have starte upgrade.Resetting to standard ddic password also ddint help out in our case.
Thanks for all your replies. -
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.
After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
Tried to run firefox.exe -P but receive error message:
XML Parsing error: undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line number 18, Column 1:
<dialog
^
Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
Thank you very much again.
Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition. -
I recently tried to update my iPhone 3 software via my mothers Mac book comp - during the upgrade I lost all my music and calendar dates and now the iTunes on my phone has my mothers iTunes detail - how do I get all my info back on the phone?
Restore it using the computer you normally sync with.
-
SCM5 - SCM7 Upgrade Error during LiveCache upgrade Step C4
We are in the process of upgrading our SCM5 system to SCM7 release level. During livecache upgrade step C4 to load transaction data, we are getting error CONNE_IMPORT_WRONG_COMP_TYPE. The dump says that "when importing the object 'OT_ORDERS", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "/SAPAPO/SAPLOM_UPGR_PARALLEL". The data type is "P" in the dataset, but "C in the program".
Our source livecache version is 7.6.03.12 and target livecache version we are upgrading to is 7.7.04.29. We used BS 7 SR1 liveCache 7.7.04 DVD from service marketplace. We did not use the update DVD since the guide mentioned that customers on SCM5.1 or higher need to run livecache upgrade from update DVD.
All steps in A, B have already been completed.
More details from the ST22 dump -
Error analysis | | An exception occurred that is explained in detail below. | | The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was | | not caught in | | procedure "GET_DB" "(METHOD)", nor was it propagated by a RAISING clause. | | Since the caller of the procedure could not have anticipated that the | | exception would occur, the current program is terminated. | | The reason for the exception is: | | When importing the object "OT_ORDERS", the component no. 5 in the | | dataset has a different type from the corresponding component | | of the target object in the program "/SAPAPO/SAPLOM_UPGR_PARALLEL". | | | | The data type is "P" in the dataset, but "C" in the program. Information on where terminated | | Termination occurred in the ABAP program "/SAPAPO/SAPLOM_UPGR_PARALLEL" - in | | "GET_DB". | | The main program was "SAPMSSY1 ". | | | | In the source code you have the termination point in line 3222 | | of the (Include) program "/SAPAPO/OM_UPG_CLASS_IMPCLUT". | | The termination is caused because exception "CX_SY_IMPORT_MISMATCH_ERROR" | | occurred in | | procedure "GET_DB" "(METHOD)", but it was neither handled locally nor declared | | in the RAISING clause of its signature. | | | | The procedure is in program "/SAPAPO/SAPLOM_UPGR_PARALLEL "; its source code | | begins in line | | 3221 of the (Include program "/SAPAPO/OM_UPG_CLASS_IMPCLUT ".
We are running AIX5.3 and Oracle 10.2.0.2.0.
Any help here will be greatly appreciated.This is exactly the same with OSS 305147 2010. It will be answered in BC-DB-LCA area.
-
EHP6 Upgrade - MAIN_SHDRUN/DDIC_UPG
Hello,
I am performing EHP6 upgrade and I am kinda stuck in pre-processing phase. I am getting the following error message.
Last error code set: RFC login to system SID ashost ip nr 06 gwhost host gwservice sapgw06 failed with code 1 key RFC_COMMUNICATION_FAILURE:
SAPup. log file has the below message
CURRENTPHASE MAIN_SHDRUN/DDIC_UPG
...started at 20140806142416
# INFO: Nothing has been done in this phase.
..timestimes self: 2.080/0.410 usr/sys, children 1.390/0.690 usr/sys.
..finished at 20140806142539 with status SUCCEEDED.
# Error message set: 'RRFC login to system SID ashost ip nr 06 gwhost host gwservice sapgw06 failed with code 1 key RFC_COMMUNICATION_FAILURE:
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '172.17.60.165:3306' not reached
TIME Wed Aug 6 14:25:39 2014
RELEASE 721
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 2895
DETAIL NiPConnect: 172.17.60.165:3306
SYSTEM CALL connect
ERRNO 239
ERRNO TEXT Connection refused
COUNTER 18
...begin dialog at 20140806142541
What amuse me is that, I don't find executable's for starting the shadow instance under . /SUMdirectory/ abap/bin/ directory. startshd and stopshd files are missing.
I used the command sapcontrol -nr 06 -function Start to start my shadow instance and its started, but I am still getting the same error if I continue the phase.
I am doubting if the kernel is having any issue but I am unable to crack it.
Any help would be great.
Regards
HariHello RB,
Thanks a lot.
I was thinking that startshd is just like sapstartsrv..as part of a kernel .
Thanks for your timely help.
Regards
Hari -
Error occurred during automatic upgrade of MDL file
The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Any suggestion is greatly appreciated.I had the same problem
MDL1323: Error occurred during automatic upgrade of MDL file <>.
Detailed Error Message:
Error: MDL1122: Import data file auto_upgrade.src not found
Reason:
I exported mdl from 11.2.0.2 version to 11.2.0.1
Solution:
- Upgrade version DWH from 11.2.0.1 to 11.2.0.2
- Install separate client on the server DWH and run import script from client directory -
Best practice to secure database during patching/upgrade-Vault disabled
I have a highly confidential system and to protect the data in the DB, I intend to use Oracle Vault. In my company, we have centralized services and therefore, the oracle Unix owner and sysdba are owned by this group, not the application dba that "knows" the system (me).
The problem I have is what would be the best way to protect my data from the sysdba user during the window that Vault is disabled?
I thougth maybe I could un-mount and file protect the tablespace from the Unix oracle user during the upgrade process, but the tablespace could be outdated when I remount it after the patch. I am not sure how I might patch it seperatley. I am thinking I might export and drop the schema during the patching, then load it back in when vault is enabled again. This will work for a year or so, but I envision the databases getting too large to do this efficiently.
Does anyone have any thoughts on how I might protect the data in this scenario?
Edited by: user4714217 on Oct 20, 2008 11:06 AM for clarityHi,
I did not understood your question properly, but the thing which I understood is like you do not want any other user to access the database when your security vault is disabled.
At that time you can
1) Start the database in restrict mode (only a sysdba can do it).
2) Change the password/lock the user till the time your patching activity is going (any user with dba role can do it, so might be not so useful)
Regards
Anurag Tibrewal -
I attempted to upgrade my Ipad 2 from ios 7.2 to 7.4.
During the upgrade, the Itunes on my PC was prematurely terminated by a failed IE application.
the end result is that my Ipad is now stuck at the Apple screen, cannot be switched off, will not be recognised by the Itunes application running on the PC and is generally a brick.
Any suggestions? Please.FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
You Cannot select assembly order for deletion error with BAPI_SALESORDER_CAHNGE after EHP6 upgrade
Hi All,
We are using Z transaction to update Wbs element data to sales order line item through BAPI_SALESORDER_CHANGE. After EHP6 upgrade while updating Wbs element data to old sales orders(Created before EHP6 upgrade) we are getting You cannot select assembly order < order number> for deletion (V1 748) error in BAPI return table, For multiple Sales order run.
But if we run the same order individually it is getting processed successfully. W e are passing the same values in individual and multiple case.
We debugged the BAPI and found one more error related to Authorization, But BAPI return table is giving different error (V1 748)message. Please help us in finding the issue.Hi Sujay..
Please check.
http://help.sap.com/saphelp_47x200/helpdata/en/b7/58c4c87e0811d2b66a0000e82d8bd1/frameset.htm -
SOLUTION to iPhoto 6 crashing without warning during library upgrade
THE PROBLEM
The problem which I and some others in this forum were facing was that iPhoto 6 would CRASH WITHOUT WARNING halfway through the process of updating our previous iPhoto 5 library. This is a different problem from the permissions issues which some other users have faced, which iPhoto 6 does warn you about.
THE EXPLANATION
After trial and error, I concluded that there was a corrupted photo in my library that iPhoto was choking on during the upgrading process. Unfortunately, there was no easy way to identify which of my 3000+ photos this was. Hence, the solution was to laboriously test my library year-by-year, to isolate the year in which the problematic photo was hiding. This meant creating individual copies of my iPhoto library, one for each year, and then test-upgrading each individual copy. Each individual year upgraded fine, except for 2004. Thus, I could deduce that the problematic photo was in 2004. I then created a new copy of my iPhoto 5 library, containing all photos except for those in 2004. It upgraded fine. I then manually dragged my photos from 2004 back into iPhoto. Thus, all my comments/ratings/keywords for other years were intact, and I only had to re-do 2004.
THE STEPS
In order to use this solution, you must have a backup of your iPhoto 5 library. It also helps if you can install a fresh copy of Mac OS X 10.4 and iPhoto 6 (SIX) on another partition. The steps are:
1. Reinstall/'downgrade' to iPhoto 5 (this requires deleting the iPhoto 6 application and also all iPhoto receipts in the /Library/Receipts folder, before reinstalling from iLife '05)
2. Create multiple copies of your iPhoto 5 library backup (the entire iPhoto Library folder from your iPhoto 5), and title the backup copies 'Early Photos', '2003', '2004', '2005' and '2006'.
3. By holding down Option while launching iPhoto 5, open each copy of your library, and delete photos from each copy so that only one year of photos remains in each copy, i.e. you should have one library containing only 'Early Photos' (pre-2003), one containing only 2003 photos, etc.
4. Test-upgraded each individual 'annual' library on another installation of iPhoto 6. Those that can be upgraded are fine. The one that crashes obviously contains the corrupted photo.
5. Go back and create a fresh copy of your iPhoto 5 library, and open it in iPhoto 5. Delete only the photos from the problematic year, leaving all the rest behind. Before deleting the photos, drag them into a folder on the desktop, so that you can re-import them later.
6. Now re-install iPhoto 6 (the end is near, trust me) and open the fresh copy of your iPhoto 5 library. Upgrade it. You will now have a upgraded library, minus all the photos from the excluded year.
7. You should now be able to re-import photos from the excluded year, by dragging them into iPhoto 6. However, this may mean reintroducing the corrupted photo into your library. I really can't help you beyond this - re-import at your own risk, and always keep backups.
8. Enjoy (after much frustration).
ALTERNATIVES
It isn't necessary to test your library year-by-year. For example, if you only have photos from one year, then you'd have to find some other way to break your library into logical chunks, and test each chunk using the procedure above. Again, the chunk that crashes during upgrading contains the corrupted photo. It's really up to you how finely you want to sub-divide and test your iPhoto 5 library, to isolate the corrupted photo.
(P.S. Really, this should be addressed by Apple. It is murder and really tedious to do this, and I suspect it would be difficult for anyone not familiar with Mac OS X, and also difficult if you don't have multiple partitions/drives to install separate copies of iPhoto 5 and iPhoto 6.Thanks for your help. It should work with some iPhoto libraries, but unfortunately not with mine.
iPhoto was crashing, so I found the guilty album, deleted it, retried: but it crashes on another album, etc. I think I have more than one corrupted picture/album, so the only solution to make iPhoto complete the update was to remove 90% of my pictures... not a real solution
Maybe you are looking for
-
QuickTime 10.1 Screen Recordings Blurry Once Imported into Premiere Pro CS6
I am doing screen recordings with QuickTime 10.1 that appear to be of good quality until I import into Premiere Pro CS6 and then they display and export very poorly and very blurry to the point that you can't read the text on the page. Any suggestion
-
I purchased app 101books ...horrible and sad...links do not work, lies on description, highway robbery
-
Apeture 3 when I try to open it it says not compatible with is x ?
I Just downloaded apeture 3.0 on to my Mac mini and it says it's not compatible with my operating system and I'm running the latest mavericks
-
When 'new' is necessary and when is not ?
The following codes were extracted from a book : ArrayList<Account> things = new ArrayList<Account>(); things.add(new Account()); Account myAccount = things.get(0);Question: The 3rd line didn't have 'new' keyword, does it mean that myAccount is stor
-
How to open a 2nd WD View in a new window?
Hi, my WD Component has a button which opens a new view. I would like to open this view in a new window. I tried to link two views of two windows with plugs, but it seems like I'm only able to navigate between views of the same window.... Up to now m