/ASU/UPGRADE after the ECC6.0 EHP4 upgrade Finalization step

Hello all,
Needed some information on the ASU step in Postprocessing phase of the upgrade. We are upgrading form 4.7 to ECC 6 EHP4 and we are in the Postprocessing phase. The current step is to perform the /ASU/UPGRADE, and I wanted to know if I need to stop te upgrade to perform this step or I can proceed with the rest of the Post processing and Finalization phase and still do the /ASU/UPGRADE step. Please advice ASAP.
Thanks
Deepak

Hello,
we are in upgrade to ECC 6.0 EHP4 too and now at phase ASU/UPGRADE.
Note 1000009 advices to make adjusments in client 000, but we are working in client 100. And the procuced task list is client-dependent. So things like budget period or wage types are usually in working client.
Which is the correct client to use?
Regards,
Julia

Similar Messages

  • Runtime Errors SYNTAX_ERROR in SAPLS_CODE_INSPECTOR after the ECC6.0 upgrad

    we recently upgraded our development test sandbox from 46C to ECC6.0 using downtime minimized strategy for practice purposes.After a sucessful completion of the upgrade we applied all the support packages successfully upto the latest available. Upon testing we found that everything else works fine except code inspector. Everytime we go to transaction sci we get syntax error
    Runtime Errors         SYNTAX_ERROR
    Date and Time          08/20/2008 08:26:29
    Short text
         Syntax error in program "SAPLS_CODE_INSPECTOR ".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "????????????????????????????????????????" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program "SAPLS_CODE_INSPECTOR " in
          include "LS_CODE_INSPECTORTOP " in
         line 11:
         ""SCI_DYNP" must be a flat structure. You cannot use internal tables, s"
         "trings, references, or structures as components. ."
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "CRENSHAWDP "
         Error in the ABAP Application Program
         The current ABAP program "????????????????????????????????????????" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Please eliminate the error by performing a syntax check
         (or an extended program check) on the program "SAPLS_CODE_INSPECTOR ".
         You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    r analysis
    The following syntax error was found in the program SAPLS_CODE_INSPECTO
    ""SCI_DYNP" must be a flat structure. You cannot use internal tables, s
    "trings, references, or structures as components. ."
    to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    2. Corresponding system log
        Display the system log by calling transaction SM21.
        Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
        In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    tem environment
    SAP-Release 700
    Application server... "kiel"
    Network address...... "138.254.140.161"
    Operating system..... "AIX"
    Release.............. "5.3"
    Hardware type........ "000B7B2ED600"
    Character length.... 8 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "kiel"
    Database type..... "ORACLE"
    Database name..... "UPD"
    Database user ID.. "SAPR3"
    Terminal................. "D800204486"
    Char.set.... "en_US.ISO8859-1"
    SAP kernel....... 700
    created (date)... "Jun 22 2008 20:58:25"
    create on........ "AIX 2 5 005DD9CD4C00"
    Database version. "OCI_102 (10.2.0.2.0) "
    Patch level. 166
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
    Memory consumption
    Roll.... 16128
    EM...... 8379840
    Heap.... 0
    Page.... 40960
    MM Used. 705904
    MM Free. 3481488
    r and Transaction
    Client.............. 070
    User................ "CRENSHAWDP"
    Language key........ "E"
    Transaction......... "SCI "
    Transactions ID..... "48AB59A7D7E00112E10080008AFE8CA1"
    Program............. "????????????????????????????????????????"
    Screen.............. " "
    Screen line......... 0
    Information on where terminated
    Contents of system fields
    Name     Val.
    SY-SUBRC 0
    SY-INDEX 0
    SY-TABIX 0
    SY-DBCNT 0
    SY-FDPOS 0
    SY-LSIND 0
    SY-PAGNO 0
    SY-LINNO 1
    SY-COLNO 1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    SY-MSGTY
    SY-MSGID
    SY-MSGNO 000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO 0
    SY-DATUM 20080820
    SY-UZEIT 082629
    SY-XPROG
    SY-XFORM
    Internal notes
        The termination was triggered in function "ab_genprog"
        of the SAP kernel, in line 1551 of the module
         "//bas/700_REL/src/krn/runt/abgen.c#10".
        The internal operation just processed is " ".
        Internal mode was started at 20080820082629.
        Program name.........: "SAPLS_CODE_INSPECTOR ".
        Error message........: ""SCI_DYNP" must be a flat structure. You cannot use
         internal tables, s".
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    => 64 bit R/3 Kernel
    => 64 bit AIX Kernel
    => Heap limit      = 2684354560
    => Stack limit     = unlimited
    => Core limit      = unlimited
    => File size limit = unlimited
    => Heap address  = 0x11716f260
    => Stack address = 0xfffffffffff2a20
    => Stack low     =  0xfffffffffff2a20
    => Stack high    =  0xffffffffffff710
    => Stack Trace:
    #AixStack() at 0x1000a2474
    #CTrcStack2() at 0x1000a256c
    #rabax_CStackSave__Fv() at 0x1000d0e04
    #ab_rabax() at 0x1000cd7e4
    #ab_genprog() at 0x100b3d5f8
    #newload__FPCcP13TmpSubpoolDirUiPUi() at 0x1002194ac
    #ab_LoadProgOrTrfo__FPCcUiPUi() at 0x10021905c
    #ab_load() at 0x100218e2c
    #ab_LoadMainProg() at 0x100820d6c
    #dystartx() at 0x100ade944
    #dy_cdiag() at 0x100833174
    #ab_ctransaction__Fv() at 0x100ae1ef0
    #ab_retdynp__Fi() at 0x100821c98
    #ab_dstep() at 0x100821924
    #dynpmcal() at 0x100e932e0
    #dynppai0() at 0x100e905ec
    #dynprctl() at 0x100e99d48
    #dynpen00() at 0x100e8cc18
    #Thdynpen00() at 0x1000f9ed4
    #TskhLoop() at 0x1000fec7c
    #ThStart() at 0x100115890
    #DpMain() at 0x1017f4b14
    #nlsui_main() at 0x1018e2b6c
    We contacted SAP OSS about this problem and they suggested that we check our LS_CODE_INSPECTORTOP include in program SAPLS_CODE_INSPECTOR and revert it to the original version. We did that and still are getting this error. Any suggestions how to fix this issue. All advices are welcome.
    Thanks.
    Kamran

    Nope... this is SAP standard code so I will reply to the OSS and wait for them to come back to you.
    Regards
    Juan

  • My photos are out of chronological order after the os 5 upgrade.   How can I get them back in order?

    My photos are out of chronological order after the os 5 upgrade.   How can I get them back in order?
    If its not possible, how do I go back to the old  os?

    I had tried that several times with no luck.  Late last night I was finally able to get through  to the Verizon technical support who then called in Apple technical support.  It took 1 1/2 hours for them to figure it out and guide me through a fix.  So here's the deal .......... I use Yahoo mail and had left the "contacts" button in the on position.  Apparently Yahoo likes to go into your contacts and gather information and can leave it in shambles.  My advice is, go to settings, then mail, contacts, calendars.  Select any and all of your email accounts and go in and turn off their access to your information.  Leave it on for Icloud but none of the others.

  • Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.

    Anyone else have the issue where, after the 8,3 upgrade, you cannot access more than 1 exchange account on your iPhone? This is annoying to me as I need to access 4 daily and cannot due to this error.
    The first one, my private home email, works fine. With the other 3, I get the message "Cannot get mail: The connection to the server failed"
    All were working fine before the 8.3 upgrade. I did try the old trick of making one minor change on the account and resaving, but that did not change anything. I even deleted my work account and re-entered it from scratch, but again, sadly, no luck. For the time being, I am successfully getting the email via IMAP, but this ***** compared to exchange. Anyone have any idea what is happening or if a fix is in the works?

    Well, the one set up on exchange 2k3 is now working fine, although no changes were made on either the iPhone or the exchange side, so that's fun, but it still is throwing errors when connecting to the other 2 exchange accounts. The common elements are that both non-functioning exchange accounts are google apps for business accounts. So is one of the ones that's working, by the way. The settings on both accounts are the same as the one that's working, and both worked fine before the 8.3 upgrade. I have no issue accessing both of these accounts on my ipad which is currently on 8.2.x. If it's not the iphone OS at fault, I'm at a loss as to what it could be.

  • I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred".  It was happening before and after the last OS upgrade.  I've done a hard reboot with no effect.  Any suggestions???

    I'm unable to update my apps or download new apps to my Iphone. When I try I get a message "An unknown error has occurred".  It was happening before and after the last OS upgrade.  I've done a hard reboot with no effect.  Any suggestions???

    Have either of you had any luck with this issue.  It began happening to me today when I was trying to purchase music on iTunes.  I have purchased music and games in the past and have had no problem.  Any help would be appreciated.

  • Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade

    Am I correct in assuming that the NIKON D810 can still not be tethered in Lightroom even after the 5.6 upgrade ?

    ...And google says:
    Tethered camera support in Lightroom

  • HT1414 My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    My iPhone4 (iOS 6) does not sync with iTunes. The message displayed suggests to return the iPhone to factory settings (which I cannot do). This happened after the iPhone was upgraded to iOS6 and performed one sync. Any ideas?

    Lilasil wrote:
    The message displayed suggests to return the iPhone to factory settings (which I cannot do).
    Why not?

  • Internet Don't work after the last IOS Upgrade. What can I do?

    Internet Don't work after the last IOS Upgrade. What can I do?

    Can you give us more details?
    Is Wi-Fi working, i.e. not greyed out in Settings/Wi-Fi?
    Can you go online by using the Mobile Network?
    Any error messages given?
    Problem with your router?
    See these articles for help with Wi-Fi issues:
    Issues with Wi-Fi networks and connection
    Wi-Fi or Bluetooth settings grayed our or dim
    If you see No Service in the status bar of your iPhone or iPad - Apple Support
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • After the 5.0 upgrade, why is it every time I start Firefox I get the welcome to 5.0 web page? Plus My home page opens. Its annoying.

    After the 5.0 upgrade I cannot get rid of the welcome to firefox 5.0 home page on the browser start up. It has happened in the past with other upgrades but goes away after the first initial run. Any help on this?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • Authorization issue after the Support packs upgrade

    We're having problem on authorization issue after the SP upgrade.
    One issue if "You are not authorized to call up line item display" using FCH1 and FS10N tcodes.
    And the SU53 showing problem on S_TCODE FAGLL03.
    How are we going to solve this issue? We dont want to add this missing auth object on all our finance roles.
    Thank you in advance.

    How can i send you the trace file? What is your email address?
    If I were you, I won't do that. Did you not ever sign some confidentiality agreement? I wonder.
    Anyhoo... (copy right @ David)
    What are the objects been caught in category RC=4, RC=12?
    Relate them with functional aspect of the transaction (error screen)
    Edited : You can paste RC=4, RC=12 objects here without customer specific value if you want to.
    Regards,
    Arpan Paik
    Edited by: P Arpan on Aug 23, 2011 2:36 PM

  • How can I get my email and message notifications back on the lock screen after the 5.01 upgrade?

    After the 5.01 Lollipop upgrade I lost my email, text and voice mail notifications on the lock screen on my LG G3.  How do I get them back?

    Still didnt work...i dont know whats wrong.. i want them to look like this...

  • Custom application is not working after the support package upgrade.

    Hi SDN Folks,
    I have upgraded the portal from SP09 to SP25 successfully. But after the upgrade our custom application is not behaving as before. When we submit anything in the custom page its returning to home page. No error in the log files also.
    Custom application is a devoloped in webdynpro java.
    Kindly suggest.
    regards,
    Mahesh.N.R

    Hi Sita,
    Currently I canot take help form the developers, please let me know where i ca checkwhether the custom URLs are set to home page.
    regards,
    Mahesh.N.R

  • Drastic slowdown on Macbook Pro quad core after the mighty Yosemite upgrade.

    Is anyone @ Apple recognizing this issue after the Yosemite upgrade.. my laptop went from blazing fast webpage and software use to a slow turtle.. my pentium celeron is running faster than my current Apple laptop.. There should be a warning saying your PC will turn back 20 years by choosing this upgrade .  everything is slow.. it take close to 30 seconds or more to boot up.. come on now I have a SSD.. did not have a problem with Maverick.. Youtube will buffer with 16gb memory.. the wife cuts of random..  all these issues after Yosemite.. what the deal Apple is there a fix or I need to go buy Maverick from the Apple store and re-install?  I done have a back up.. I'll re-install and loose my data , no big deal.. but I refuse to run Yosemite with the power less than celeron laptop..
    Here are my specs:
    EtreCheck version: 2.0.6 (91)
    Report generated October 23, 2014 at 10:34:29 PM EDT
    Hardware Information: ℹ️
      MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
      MacBook Pro - model: MacBookPro11,3
      1 2.6 GHz Intel Core i7 CPU: 4-core
      16 GB RAM Not upgradeable
      BANK 0/DIMM0
      8 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      8 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel Iris Pro -
      NVIDIA GeForce GT 750M - VRAM: 2048 MB
      Color LCD spdisplays_2880x1800Retina
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:14:56
    Disk Information: ℹ️
      APPLE SSD SM0512F disk0 : (500.28 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 499.06 GB (462.74 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.42 GB Online
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Launch Agents: ℹ️
      [loaded] com.citrix.AuthManager_Mac.plist Support
      [loaded] com.citrix.ReceiverHelper.plist Support
      [running] com.citrix.ServiceRecords.plist Support
      [loaded] com.google.keystone.agent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.google.keystone.daemon.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      iSkysoft iTube Studio Application (/Volumes/iSkysoft iTube Studio/iSkysoft iTube Studio.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
      Default Browser: Version: 600 - SDK 10.10
      o1dbrowserplugin: Version: 5.4.2.18903 Support
      CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 Support
      googletalkbrowserplugin: Version: 5.4.2.18903 Support
      SlingPlayer: Version: (null) - SDK 10.8 Support
    Safari Extensions: ℹ️
      iTube Studio
      My eBay Manager
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          4% com.apple.WebKit.WebContent
          3% ADManager
          2% WindowServer
          1% hidd
          1% Safari
    Top Processes by Memory: ℹ️
      241 MB Finder
      206 MB com.apple.WebKit.WebContent
      172 MB WindowServer
      86 MB Safari
      69 MB Dock
    Virtual Memory Information: ℹ️
      12.96 GB Free RAM
      2.65 GB Active RAM
      445 MB Inactive RAM
      1.12 GB Wired RAM
      902 MB Page-ins
      0 B Page-outs

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • SAP R/3 4.6B to ECC6 EHP4 Upgrade

    Hello,
    We are on SAP R/3 4.6B and are in the process/plan of Upgrading to ECC 6...
    Is it possible to directly go to EHP4 in a single downtime..?
    I am trying to finf the Source/DVD's from the market place but unable to locate one...
    Is it possible or should we go to EHP3 only?
    If someone has link/path for the software download , kindly help...
    Thanks,
    RaHuL...

    [http://service.sap.com/swdc|http://service.sap.com/swdc]
    - download
    - Installations and upgrades
    - installations and upgrades - Entry by Application Group
    - SAP Application Components
    - SAP ERP
    - SAP ERP Enhance Package
    - EHP4 for SAP ERP 6.0 / NW 7.01
    Here you should read the info page carefully.
    Download the Master Guide and read it to find out about how to perform the upgrade.
    - Installation and Upgrade
    - <Database Platform>
    There is your media. Please note that it is both Installation and upgrade media
    and also both ERP and SRM media
    In order to get the kernel etc you have to select (instead of "Installation and Upgrade --> Database Platform")
    - SAP EHP1  FOR SAP NETWEAVER 7.0
    - Installation and Upgrade
    - <Operating System>
    - <Database Platform>
    There is your media together with installation and upgrade for the Netweaver platform (used when upgrading BI etc).
    Please note that you also need the Maintenance Optimizer configured in Solution Manager in order to download
    (actually you approve them for download) support packages etc from the Service Marketplace.

  • ITunes store wont open on my iPhone 5 after the iOS 7 upgrade

    I was able to use it for a few days after the upgrade, but now it keeps crashing every time I try and open it. I have tried the date/time/auto thing and I have tried it when I am connected to wireless.

    Some folks that have had the problem you are having had to backup their iPhone on iTunes and then Restore their iPhone as a new in-the-box Factory Settings iPhone.  After this they brought their iPhone up as their new phone, iMessages worked, then they went back to iTunes and restored with their Backup which contained all their data, photos, music, etc. 

Maybe you are looking for

  • How to create one-to-many form

    I have a database that has one-to-many relations. Could someone give me a good exmaple of how to create a WEB FORM (using php) that would allow me to for example enter the Name, and then below ADD as many names of children of this person (each as a s

  • IPod Nano with 1.1.1 software update and iPod Radio Remote

    I currently have iPod Nano with 1.1.1 software update and iPod Radio Remote, but even after the update I do't get the radio option to appear in the main menu or music menu, with the option in settings turn ON. Why isn't this thing working?

  • How to implement 2-way SSL in OSB web services

    Hi , I need to implement secured SSL communication in my OSB web services . For this I have used the self signed certificates in weblogic console and configured them . I also enabled the https parameter in my proxy service but now when I am trying to

  • JTextPane Problem on MacOs 10.2+

    Hi everyone, I have a problem using JtextPane on MacOsX with JVM 1.4x installed. All worked good on MacOs X with ONLY jvm 1.3.x installed. If also jvm 1.4.x is installed then the problem I'm reporting appears, whether runs on 1.3.x or 1.4.x (using th

  • CS6 Timeline issue

    Portions of my CS6 timeline will not remain rendered, even after they are saved. I "Control S"  the render line turns green and it shows saved, but later reverts back to red (unrendered). Any ideas?