Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

I am attempting to connect some creative inspire p5800 speakers to the realtek AC97 audio on my A8N-E. But when I run the connector sensing it senses the jack i have plugged into the lime/green socket as stereo line in. In the speaker configuration the lime/green socket is identified as Front speaker out. The jack at the other end of the lead is plugged into the correct socket on the subwoofer. The rear and center speakers work fine.Any ideas would be greatly appreciatedThanks

well there jason, since you asked, there are some of us who have the P7800 where there are four plugs on the side of the speakers and only three plugs on the computer side with asus mother board needing four. The only way around it is to disconnect the grey plug which is the bass and side speakers and bootleg to the bass which isn't how it is supposed to work.

Similar Messages

Creative Inspire P5800 5.1 Speakers Only the subwoofer and front 2 speakers work HELP!!

Hello,
I have got the "Creative Inspire P5800 5.1 Speakers." I have connected all the speakers to the subwoofer and plugged my Creative Zen Vision : M into the AUX socket on the back of the subwoofer using a jack to jack cable. When i play music only the subwoofer and the front right and left speakers work is there anything i can do to change this? (I have got no Computer involved)
Any help would be appreciated,
Chris.

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

Replacement Wired Remote Creative Inspire P5800

Does anyone know whether you can buy a replacement wired remote from a Creative Inspire P5800? I've spent all morning going in circles on their website. The headphone socket is defective on mine, and I don't really want to buy a whole new system if I can help it.

Hey, I had the same problem some time ago with the same set. My solution was to make the wire straight and don't twist it anywhere. After that it all worked fine. Good Luck

Microphone and creative inspire p580?

is it possible to use a mic with creative inspire p580 speakers pn the k7n2-delta-l?

You need to install the S-bracket, which probably came with your board. If not you will need to buy one seperately. Then, 2 of your speaker jacks go into the S-bracket leaving you with the mic slot free. I have K7N2 Delta ILSR and the same speakers and this method is what i use.

How to connect Asus mother board P5B sound card with Creative Inspire 5.1 5200 speaker system?

Hi, I am not sure how to connect them, as I find that there is no sound from centre speaker, please help me, thanks?

mg,
Have you check through your motherboard manual for the proper setup of your onboard audio with 5.1 speaker system?
Jason

Creative Inspire p5800

Hi,
Ive just bought a set ov these speakers, hooked them up and nothing, i've also tried connecting them to an mp3 player via the 'aux in' port, but still no joy.
Are they knackered?

Hi all do you have any idea to solve my problem?
Currently, I'm using the P5800. My problem is sub can't working. I fix together with SB24Bit External sound card.Previously is working. I'm very proud with the sound,after I decrease the master volume and bass level volume my sub suddenly quit.what happened actually?
-Is that mean I need to change the sub speaker or the coil inside the magnet core is burned?
-or maybe my component circuit like ic,capacitor,diode burned?
If I plug n unplug the power to the sub,I can heard that 'bump'. Is that mean my circuit in good condition or maybe the charge and discharge for capacitor?
Please answer me...
Thank You

H55M-E23 Problems with Onboard Realtek Gigabit NIC

I just finished a new build HTPC using the H55M-E23 and I'm having problems with the onboard Realtek Gigabit LAN controller.
System specs are: OS is Windows 7 - 64 bit. Intel i3-540 @ 3.0 GHz, 4GB RAM, 60GB SSD. NVIDIA GT 430 video card w/ 1MB RAM is only add in card. 300 Watt Power Supply. NVIDIA card is the primary video card and is set up that way in BIOS.
Everything installed fine and seems to work great, except that when I watch HD video, stored on a local NAS on my home network (all gigabit, including cables), about half the time, the Realtek controller will drop to about 10 MBPS, which causes the video to stutter and lockup. The video normally streams across the network at about 23 MBPS max. All other PC's on my network play these videos (home movies) no problem. CPU utilization on the MSI board is only about 5% and the video card's GPU utilization maxes out at only about 65% when the videos are streaming properly. Also, I can copy the video directly to the SSD on this HTPC and the video plays fine. So I think the rest of the hardware on the HTPC is sufficient to do what I'm trying to do. The truly annoying thing is that sometimes it works and sometimes it doesn't work.
All the latest drivers have been installed for the motherboard, video card, and Realtek NIC (trying both from MSI's website and Realtek's with the same result). The Windows installation is very clean. I've wiped the SSD twice and done a fresh Windows install and tried this immediately after the Windows install has competed and all drivers installed and again after Windows has completed all updates and I get the same result each time. I've tried several "slow network connection" solutions from Google and none so far have worked.
For anyone old like me, this acts like an IRQ conflict from back in the early days of Windows. Of course Windows 7 doesn't let you mess with IRQ's anymore, at least that I can find. BTW, Device Manager lists the IRQ for the Realtek NIC as "-2", which is very odd to me, but I'm no expert. I'm at the point now of disabling the onboard Realtek LAN and buying a cheap NIC to see if that works, but wanted to try to see if MSI has any suggestions or should I RMA the board? Any suggestions would be greatly appreciated.
Thanks,
Ben

Yeah, I agree that I'll need to upgrade the PSU anyway. 300W is marginal at best for this setup. I would have probably been ok without the add in video card, but the GT 430 really makes a difference compared to the built-in graphics of the i3 and the card was so inexpensive that it was a no-brainer. I may try to take out the GT 430 just to see if the Realtek NIC behaves better, but I think long term I'll just get a cheap PCI-e NIC and that should fix things.
I would normally suspect the SSD as well, but I get the stuttering when I'm using the network streaming. The videos play fine when running directly off of the SSD. I know the SSD could still cause issues, but everything just seems to point to the Realtek chip. Honestly, I really think it's a driver / setting issue and not a bad piece of hardware, although I could be wrong.
If anyone has any other ideas, please keep 'em coming. In the meantime, I'll try a new NIC, etc and let you know what I find.
Thanks,
Ben

Creative Inspire 5.1 Digital 5700

I want to buy the inspire 5700 but it is off the buy list. I li've in holland. I was watching it because it was not in stock. But after a while it was gone of the list. wenn is it getting back so i can buy it's

kk.. ill buy the decoder DDTS-100 and with 5.1 sound. what would you suggest?
Creative Inspire T5900
Het Creative Inspire P580
De Creative Inspire P5800
De SBS560-
with the decoder:
Creative Decoder DDTS-100
or buy the complete: Het Creative Inspire GD580
its for my dvd player and tv.
another question:
jermey can you give me a link of DTT-100 with the Inspire T-5400 speakers. i cant find them. i live in holland maby its that...
and another question:
i have another question my dvd players supports dolby digital. and now i want to buy one with dolbey digital EX does that work to and another question:
my dvd players supports 5.1 sound if i buy 7.1 sound with a decoder do i get 7.1 sound?
srry i aks so many questions i want to make sure i buy the best:smileyvery-happy:
Message Edited by hanspeter on 03-15-2005 03:19 PM

Ddts-100 and inspire p5800

are the creative inspire p5800 speaker system compatible with the ddts-100 decoder?
Is the decoder connectable to the K|i|s|s dp-1000 DVD Player?

Gr33nC0d3r,
Yes, the speaker is compatible with the DDTS-100 decoder. Also, you should be able to connect to the decoder without problems since the decoder have coaxial/optical input which most DVD player should have. What type of output connector does your DVD player have?
Jason

ASUS A8N-E (bios 1010) doesn't detect Creative X-FI Extreme Mu

Well, there is one more with a not functional sound card...
Just bought a creative x-fi extreme music, Model SB0460, S.N: MASB046054700676Q, came with a passi've cooler.
Have a ASUS A8N-E with BIOS 00, have tried every PCI slot and xp doesn?t detect the card. Onboard sound disabled, and drivers uninstalled, all that solved and done.
This is really annoying adding to the fact that this is a product with a few months and not cheap. Should have spent it in a pair of kingstons.
I expect some feedback
Thank you

Hello! Thanks for the fast answering. Have a sb li've 5. with the same problem, and a 5. 500, work great, have no complaints.
System:
Aerocool Silverline 450W
AMD Athlon 64 3500+
ASUS A8N-E (bios 00)
GB kingston DDR 400 (dual channel)
Sapphire X800 GTO
Seagate IDE 60 GB 7200
I don't know how to see if it is detected in the Bios but in XP it isn't. Nothing shows, it's like it isn't in the slot. It's firmly seated in the slot, that's certain. I don't have other system handy but can test it in the weekend. However, it's highly improbable that the card is broken.
Some advice please
Thanks
I want to buy some new speakers, I would buy creative but I'm dissapointed, let's change that...Message Edited by chefanoe on 02--2006 0:30 AM

CREATIVE Sound Blaster X-Fi Fatal1ty compatible w/ ASUS A8N-SLI (Non-Deluxe

Hi, i was about to order a CREATIVE Sound Blaster X-Fi Fatalty FPS and searching google i find that there is problem with motherboard who use nVidia chipset 4, which are on my ASUS A8N-SLI (Non-Deluxe) , no more new Bios update since end of 2005 for this model and anyway?i won't take the risk to flash a Bios, so how to know if my Bios is compatible or not ?I tried to find version of my Bios pressing Del button on boot of my PC, saw lot of stuff but not my Bios version.. Any help please ?Thank's?

I just find a tool who give me all info about my bios?read below: ?Please tell me if i can buy CREATIVE Sound Blaster X-Fi Fatalty and if will be compatible or not?Program:? eSupport.com BIOS Agent Version 3.6
BIOS Date: /30/04
BIOS Type: Phoenix - Award BIOS v6.00PG
BIOS ID:? /30/2004-NF-CK804-A8NSLI-B
OEM Sign-On: ASUS A8N-SLI ACPI BIOS Revision 00
Chipset:? AMD 00 rev 0
Superio:? ITE 872F rev 7 found at port 2Eh
OS:?? WinXP SP
CPU:? AMD Athlon(tm) 64 Processor 3000+ 800 Mhz MAX: 3700 Mhz
BIOS ROM In Socket: Yes
BIOS ROM Size:?? 52K
Memory Installed:? 2048 MB
Memory Maximum:? 4096 MB
Memory Slot 0:? 024 MB
Memory Slot 02:? 0 MB
Memory Slot 03:? 024 MB
Memory Slot 04:? 0 MB
ACPI Revision:?? .0

Asus A8N-SLI Premium and X-FI Platinum no so

So i know this is a known problem but I haven't found a solution yet and don't want to read through the 00 page post on this topic where everyone gets off topic. I have a Asus A8N-SLI Premium with a X-FI Platinum. I have installed the latest BIOS with Asus' update thing. I cannot get the driver off the internet to work because it crashes when it is decompressing. The X-FI card is installed in the second PCI slot, which I read is the slot that works? I have everything installed (driver that came in box) and I get no warning in device manager, but I still get no sound. Can anyone tell me what to do?Asus wouldn't help me. and I guess I can't call Creative because I have had this card for more than 60 days. It was on my old machine and it worked.

This is what I put on the ASUS site. <span class="content">Hello to all,
So I bought this motherboard because my other one (LanParty) would run my memory in dual channel. I spent alot of time trying to get it to but it just wouldn't. So I caved in and bought an ASUS motherboard because of there good reputation of making quality products.
I have a Creative X-Fi Platinum sound card. It work flawlessly with my LanParty mobo but I have not been able to make it work with this ASUS mobo. I have read alot about it and I know that ASUS and Creative know it is a problem. I however have not been able to find a solution. I know there is a way because going through these forums people have said "well it works with mine" but they never give any specs on what is on, what PCI slot, etc etc. I have tried everything you can possibley imagine. I have tried a full reload of the whole system (about 6 times). I have tried different PCI slots. On board sound is disabled. I tried to do some ACPI setting for the computers device driver but it crashes my system.
Here is what I have now.
Bios version 302.
Sound Card is in PCI slot 2 (2 slots down from where video card goes)
Was there a BIOS fix for this problem? What BIOS was it's
What is the best slot for the card? (I don't have IRQ conflicts)
Can anyone help me? I have nice 5. surround and want good sound to be coming out.
If you have this board and this card can you give me some info on what is configured?
Thanks
Leon

Windows 8 64bit not compatible w/ AMD Athlon 64 processor and/or ASUS A8N-SLI motherboard.

Why should I have to go through a plethora of troubleshooting techniques, then have to settle for using the Windows 8/ 32bit install CD, when I have a 64bit system? I think it's probably something in the Windows
8 /64bit code that causes it to fail install w/ AMD Athlon 64bit processor, and/or my ASUS A8N-SLI motherboard. After a lot of hassle I tried the Windows 8 /32bit CD and that seems to work fine. My real question is, why should I have to settle
for 32bit on a 64bit system?

I had the same experience trying to install Window 8 Pro 64bit (Build 9200) on an old XP SP3 32bit system, but I somehow got it working; the full story.
I had two XP Sp3 32 bit systems I wanted to upgrade to Window 8 Pro 64 bit (with the $40 upgrade deal available now). System#1 is: I7 920/Asus P6T deluxe/EVGA 560Ti/3GB/1 TB SATA 300 drive/1.44 Floppy/ 12X Bluray burner (pulled the old TV tuner card for
upgrade-incompatible). I ran the Windows 8 upgrade advisor - very few issues (TV Tuner card as mentioned and other software) - bought the upgrade. Downloaded the upgrade from my Win7Pro 64bit system to obtain the 64bit ISO (2.69GB) - burned to DVD. Installed
from DVD; no problems, finished in under 20 minutes - working great (really fast boot!).
System#2 is: Opteron 180/Asus A8N-E/EVGA 275GTX/2GB/1 TB SATA 300 drive/ 1.44 Floppy/ 16X DVD RW burner; the Windows 8 upgrade advisor - more incompatible software than system#1, but no incompatible hardware. I had read a number of blogs concerning the issues
others were having with the upgrade failing, so before I purchased, I thought I would run the 64bit install DVD I had (known to work on the other system) to see if it worked. I should note this system was not-in-use and thus I was not worried if the install
failed (I'd just be annoyed!). Ran the install from the DVD; initial splash screen - no spinning dots - waited 15 minutes (by which time no activity on DVD or hard drive) - failure. Rebooted - entered bios (1010) - tried many combinations of settings up to
disabling nearly everything (NVRAID, Legacy USB, Floppy, Audio97- all disabled / moved SATA into every slot (1-4) / tried SATA 150 and SATA 300 (SATA2, slots 3-4) - no change - failure X4 attempts. Now original XP3 installation is corrupted (GRRRR!) - I should
have imaged the drive BEFORE - oh well. Read more about others experience with this seemingly NForce board-related issue. Plan B - I will try install with an IDE (PATA) hard drive (80GB) - failure. Read more - some mention Window 8 installer not "liking" XP
partitions / disks (???); Plan C - Re-partition / format / check 80 GB IDE drive with WDTools - attempted Win8Pro install - failure. Dejected; last attempt before considering Win8Pro 32bit - Plan D - Re-partition / format / check 1 TB SATA 300 drive with SeaTools
(Barracuda 32GB buffer-7200rpm) - run Win8PRO 64bit install from DVD (build 9200) - success! Install took nearly an hour, with 3 reboots to the finish. Specifics (install configuration): 1 TB SATA drive in Slot 4 (SATA2), upgraded memory to 4GB Corsair PC3200
(4 slots filled), Two DVD drives on Primary IDE channel (master and slave), secondary IDE channel - no devices, bios (1010) - NVRAID, Audio97,1394 port,LAN -disabled; USB 2.0, USB Legacy, Floppy - enabled, IDE-Auto), TrendNet USB wireless adapter on USB slot
2 (motherboard), EVGA 275GTX in PCIe slot 1, no other cards. System seems to be performing well (fast boot times, no hangs), but as noted, no sound (I actually forgot to re-enable the Audio97 device in bios; it was 2am). I will see if I can get the Audio97
enabled today; my backup is to add a Turtle Beach Montego DDL PCI card (with the Windows7 64bit driver and run in compatiblity mode). Hope this saga might help some others out - good luck.

Again Asus A8N (nf4 chipset) and XtremeMu

sorry for opening a new topic,but i dont have a view about this many posts.
my mobo: Asus A8N-SLI Premium, Bios 0-005 (nf4 chipset)
soundblaster xtremeMusic bought July 2006
my problem:
for about a month all worked fine, but the last weeks i got blue screens when booting, an the device manager says "unknown multimedia device", and, of course, the card doesnt work.
Already weeks before, when i started the diagnose software it says to me "no device found" but the card worked
first i thought the card was damaged, but i tried it in another pc, whic has noch nf4 chipset, and all worked fine
what should i do now?
ego
PS: sorry for my engish, i am an austrian mountain inhabitant

no new idea or any idea?

Inspire T7900 and realtek AC97 subwoofer problems

Hi everyone,
I am not sure if anyone had the same problem, I recently purchased a set of 7.1 T7900 and I have a Realtek AC97 on board card.
The subwoofer works for some time then stop, then it goes again. I tried all the configuration possible, I updated the drivers. I even tried another computer (unfortunately another realtek for laptop). I swapped cables, I used another cable.
I can't figure out what makes it stop (or working).
Sometimes it works fine other time just refuse to work. All the other speakers are working fine. Just the sub.
I am not quite sure if is the sound board or a faulty subwoofer.
I tried everything but i still cannot link why it does this.
If anyone can help or have a suggestion it'll be appreciate!
thanks
crix

try a computer with a sound blaster or something .. but from what your saying it could be a faulty woofer .. go to the service and let them check it.. it cant hurt

Asus A8N-E onboard Realtek AC97 and Creative Inspire P5800's

Similar Messages

Maybe you are looking for