Asus G1 & kernel 2.6.23 : one step backwards

Hi all,
I've been annoyed for a long time with a high pitch noise problem when laptop not plugged to AC (i.e on battery). To my great relief the problem had gone with kernel 2.6.22 ... And now it's back with kernel 2.6.23 !!!
This is probably due to fan speed handling, I don't know really. Been playing around with kpowersave with no result.
Of course, if you plug the computer back to AC the noise stops immediately.
Please help, this is just driving me mad !!

Might help

Similar Messages

Web-module one step backwards

I am using the web-module for all my assigments, so this module is of great importance to me.
My galleries are created through TTG-templates and has been a breeeze to use. Unfortunately Adobe no longer support certain standards (I don't know the technial meaning of this) thus resultning my prewies are pretty lame in comparison to LR3.
On the other hand Adobe still supports the flash-galleries although flash, as I understanding, is a death path.
Mathhew from TTG pages has a longer discussion of these issues, including the technical buzz of which I understand nada , here: http://theturninggate.net/2012/01/lightroom-4-public-beta-ttg/
Brogaard - brogaard.com

BIG BIG problem with the new web module is that it doesn't offer any HTML5 galleries. By all means continue to offer the Flash galleries, but as we all know that Flash is going the way of the Dodo, we must see some HTML5 galleries so that people who use Apple products can actually see the galleries we create.
This really is important and I am surprised and astonished that Adobe haven't addressed this area.

One step DVD unable to capture video

I have made many movies using one step dvd in the past. For some reason, now I get a message "Nothing Captured" "No video has been captured" when I try to create a new dvd from my video camera. I used the same camera and connection cords on another apple and it worked fine. It worked fine on this computer in the past. Any ideas?
Thanks

Bengt;
Good ideas but I have checked each of those items. My camera is set to play, the tape works and I am using my firewire cable. The strange thing is I did everything exactly the same on a different apple computer and it copied the tape to the DVD with no problem.
Thank you for thinking about my problem.

One Step DVD Capture Video TIme

I've just recently run into a problem with One Step DVD and would like to know if anyone else has had the same issue. I normally don't use One Step DVD but my father uses it because it requires little if any computer skills when it comes to iMovie or iDVD.
He recently came to me with a problem that has cropped up with the One Step option. When he goes to use it the the very first step in the process is capturing the Video from the camera. The camera rewinds the tape as is the norm and then the computer starts to capture the video with no problem. The problem is with the capture time/available time that shows up on the screen. For some reason the available time consistantly shows approximately nine minutes when it is a full hour long tape. I've tried finding if there is some setting that is throwing it off in the preferences and can't seem to find anything related to it. I've also tried dumping the preferences with no result. I've also tried a number of different video tapes with no change. Recently I took it home and tried it on my system where it gave me a available capture time of 17 minutes even though there is an hour of footage. Today I took MY video camera up to my folks house and hooked it up and gave it a shot and of course it gave me an available capture time of 9 minutes. So I'm at a loss here folks. Any help would be appreciated. I personally think it's the prog but I'm open to suggestions. Below are the cameras and systems I have tried this on. Remember I've tried both cameras with each computer with the result of the available capture time not matching the amount of footage on the tape.
My Father's setup
Mac Mini 1.6 Ghz
1.6 Gb Ram
OS 10.4.8
Video Camera: Canon ZR45
My Setup
Dual 2.0 Ghz PowerMac G5
2.5 Gb ram
OS 10.4.8
Video Camera: Sony TRV315

Hi Wayne,
I honestly have no explanation why iDVD / OneStep is showing only 17 mins. left of capture unless you don't have enough available HD space to capture to.
3 suggestions only:
1. Make certain you have plenty of available HD space for this process. I recommend no less than 20GB of available HD space for each hour of video.
2. Before launching iDVD/OneStep, drag and drop the plist for iDVD to the trash. Looks like this:
com.apple.iDVD.plist
3. After trashing the plist for iDVD, connect your mindv camcorder via firewire and relaunch iDVD while the camera is powered on. In most cases, iLife apps will default to the correct settings on its own (provided your mac sees the connection under system profiler).
Good luck & hope this helps
SDMacuser

One Step DVD From VCR Patched Through Mini-DV

I guess the One Step method only works with Device Control inputs?
I've got my VCR patched through my MiniDV camera, and a Firewire cable to the Mac. When I choose One Step DVD, it looks for a tape in my camera. But I can capture in FCP with this same setup.
I guess iDVD 5.0 won't let me capture this way? I don't see any preferences I can change.
Also, is there a maximum length of capture in iDVD 5.0?
Thanks!

I guess the One Step method only works with Device Control inputs?
Yep - OneStep will not work witout timecode.
from http://docs.info.apple.com/article.html?artnum=300735
Note: OneStep DVD will only capture from recorded tape on a DV camcorder or deck. OneStep DVD will not work with analog-to-DV converters. It will also not work if you are using your camcorder or deck as a pass-through device to digitize from an analog souce (such as VHS or Hi-8). In order to function, OneStep DVD reads the timecode from your DV tape and it relies on DV device control to communicate with the camera or deck.
G5dual2GHz, 550TiBook, 9600>G3Upgraded Mac OS X (10.4.3) 1TB+ Storage

One Step Workflow Activation for Shopping cart in SRM 7.0

Dear Experts,
On working to EXtended Classic Scenario, I need to configure one step approval for shopping cart in SRM 7.0.
Currently it is providing me Auto Approval by default and based on it PO is being created. I need one-level manager approval shopping cart.
I am working in Demo System of Extended Classic Scenario, I need only one step approval SC without any condition.
Kindly tell me the configuration steps in SRM and please tell me one more thing is there any need of BADI or other coding for one-step approval?
Thanks in Advance,
Regards
Pawan Keshwani
Edited by: pawankeshwani on May 25, 2011 6:22 PM

Hi Ashutosh,
Thanks for quick reply.
As per your comment when i am tring to activate /SAPSRM/C_SC_600_001_SP04 by t-code SCPR20, But It shows me a information pop up Maintain the client role and then Activation is Cancelled.
Kindly tell me what i am missing or any other prerequisite step to do for this BC Set Activation.
Thanks
Pawan Keshwani

Open file & close folder that it's in - in one step

I want to be able to double click a file to open it and then the folder this file is in closes so that it is no longer open on my desktop. Is there a one step way to do this?

Yes.
Hold down the Option key while double-clicking the file.
This also works when opening sub-folders - the double-clicked folder will open and its enclosing folder will close.

Trouble positioning a stepper motor accurately (to one step)

I'm using a PCI-7344 with an MD7506 motor driver from RS. I'm testing angle sensors whose voltage output is proportional to (you've guessed it...) angle.
I'm stepping the motor round by one step, checking that it's got there by reading the encoder, measuring the sensor voltage and repeating.
My problem is that the motor sometimes 'hunts' around the target position. In closed loop (with an encoder associated with a motor) this results in sometimes not being able to reach the target exactly with the pull-in moves.
Using open-loop and reading the encoder directly I get better results because I can loop more times, but the motor will still 'hunt' around a target point, changing direction a few times as it over
shoots by a step.
As there are a million MAX settings for this I won't list them all here, but I'm checking for a move complete when the InPos flag is set and I have a deadband of 0 steps too. I'm only rotating at 120 step/sec with a 10ms pause between steps.
Do I have to accept that stepper motors are only accurate to +/- 1 step or am I doing something wrong?
Thanks,
Mike
Mike Evans
TRW Conekt
N.I. Alliance Member, UK
http://www.Conekt.net

Mike,
Maybe other people will have better suggestions, but in my case I can advise to either:
1. increase the number of pull-in moves,
2. increase the microstepping of your drive,
2a... together with a higher precision encoder...
Other than that, the accuracy is advertised to +/- 1 step, so maybe you would like to consider a stepper with more steps/rev.
Good luck!, I hope other people will give other suggestions.
Nestor.
Nestor
National Instruments

XMLP print - two steps or one step?

When we were in 11.5.9 + XMLP 4.5 (with XMLP and CM integrated configuration), to print concurrent reports via XMLP always two steps. namely, the first step produces XML file and the second step is running XML Publisher Report to feed the XML file to the template and print pdf output.
After we upgraded EBS from 11.5.9 to 11.5.10.2, the XMLP has also been upgraded to 5.0. Apperas to be (my observation) that SRS enabled reports(such as "Printed Purchase Order(Portait)", "Invoice Print Batch of Invoices", "Invoice Print Preview Report", "Invoice Print Selected Invoices", etc) can been printed in one step (no need to run the second step - run XMLP, OPP takes care of it).
However, for non-SRS programs, such as "Print purchase order", "Print Statement", "Dunning Letter Print", it still need two steps. Oracle support says, it is bug to specific report (she gave Dunning Letter Print as example) and not related to SRS.
Just wonder if any one in this forum has similar circumstances and has got any workaround.
Any help and information appreciated.

You are correct in your assessment. We created a program that submits the desired program then passes the request id, template, etc. to the xml report publisher concurrent program.
Brett

How to upload all songs from iTunes Match to the mac in one step

how to upload all songs from Match to the Mac in one step?

You have to subscribe to iTunes Match to do that. See http://www.apple.com/itunes/itunes-match/.

HT1473 I have always imported my cds into iTunes using one step called 'joining cd tracks' which is done under the "Advanced" drop down menu. I then went on with the process. Half way through the process today the "join tracks' choice greyed out. Not avai

I have always imported my cds (including books) into iTunes using one step called "join cd tracks" which is under the "Advanced" menu. Never a problem. But today I was importing a 10 disc book and on the 7th disc all of a sudden the choice to join cd tracks was greyed out. I have tried it with other discs. No luck. How can I get to this option again. I was not doing anything different so don't know what took away this choice. Can anyone help me?

Thought it had worked but soon found out it had not.
after further days of trying finally, solved it for me Yesterday.
turned off notifications when locked, and bingo, wow.
i have not turned off iCloud but location services are also off.
best thing to do I found was keep checking your usage, settings, general, usage, and flip down to bottom, if the standby and usage are similar there is a problem, if there is a big difference then all is ok. Just keep turning things off and on until the difference is very apparent.
something on my phone was keeping the phone alive even when turned off, and I think this was the phone repeatedly trying to update continually.
to me this is definitely down to the iOS, my wife has exactly same phone and iOS but hers doesn't have any problem and the battery lasts for days.
the guy at the Genius Bar told me to restore the phone via iTunes, not iCloud. This is because iCloud remembers the exact info from your phone and simply reinstates it when you restore, and this includes the iOS too.
when I get home from holidays that's what I'll do, or wait for iOS 8 in few weeks. But I'm so pleased I finally made it work, I was beginning to think ditch the phone and buy Samsung.
anyway anyone out there please try my final solution and let me know if it works for you?

Using "One Step DVD from Movie" on my IMac 10.8.6 using Verbatim DVD-R ("Life Series") 4.7 GB 16X 120, I get a wide angle version of my two minute story rather than the 3X4 standard aspect ratio that I normally get and want. Help!

While using "One Step DVD from Movie" using DVD-R Verbatim ("Life Series" 4.7 16 X 120 min) on my IMac 10.6.8 I get a wide angle aspect ratio on the DVD not the standard 3X4 aspect ratio. The Quicktime Movie is is standard 3X4 aspect ratio and the video video footage is standard 3X4 aspect ratio? Advice will be greatly appreciated.

Try this basic troubleshooting fix :
1 - delete the IDVD preference file, com.apple.iDVD.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete IDVD'S cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iDVD folder.
Click to view full size
3 - reboot.
4 - launch IDVD and try again.
Personally I would not the the one step method but create the iDVD project from scratch so you can make sure the widescreen option is not selected in the preferences and you can follow this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How to sync deleted app same on iTunes same on device in one step ?

Using XP 32bit with iTunes 11.1.3.8 and ios 7.0.4 on ipad 3, when deleting an app and syncing using the usb cord,
I have to do twice, so once in itunes library the other time in device app tab., this to have "aligned" same pc same ipad.
If I do only one of the two steps the deleted app remains still or on device or on iTunes library.
So how to delete and sync the device only with one step (with iTunes 10.6.3 this was possible) ?
If it is called sync it has to do sync or not ?
Thanks

You can also *Transfer purchases from device* to copy all your purchased content into the new library. If you've got media on the phone that wasn't backed up from the old machine then you should probably take a look at this post from Zevoneer for options on moving your data back to a computer.
http://discussions.apple.com/message.jspa?messageID=11657508#11657508
tt2

How can I convert a large batch of NEFs to JPGs in one step or action?

How can I convert a large batch of NEFs to JPGs in one step or action? I'm very new to Lightroom and know almost nothing about it, so I need to know step-by-step. I've seen online advise about exporting but I don't know what that means - export from where to where? Can anyone help me? Thanks!

I suggest you take a little time to watch some tutorials. If you are that new to Lightroom that you don't understand what export means then it would probably be a good idea for you to get some other information as well. If you don't I think you'll find Lightroom can be very confusing. You haven't indicated what version of Lightroom you are using. The link I'm providing you is a series of getting started videos for Lightroom 5. And just about everything in this series will apply to other versions. You will note that there is one video devoted exclusively to exporting images. But I think you really need to watch the whole series.
Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

Check/uncheck record results on more than one step at a time

I have one hundred plus sequence files and several thousand steps total. Checking and un-checking record results one step at a time takes a long time. I'd like to be able to select several steps at a time then check or un check the "Record Results" option for all those steps at once. How do I do this? I'm using TestStand 2.0

Hi Kevin,
Thanks for contacting National Instruments.
Do you want to disable result recording for ALL sequences on this station? If so, you can turn on this option in the TestStand sequence editor (Configure >> Station Options, turn ON checkbox "Disable result recording for all sequences").
However, if you only want to do this for selected sequence files, then Ray is correct - you would need to write an external routine that will automate this for you. Attached is a zipfile containing a VBScript that will iterate through one sequence file ("c:\test.seq") and change all steps (all sequences, including Main/Setup/Cleanup) to turn off "Record Results". It first saves a backup copy of the sequence file, makes the changes, then save
s the modified sequence file. You can enhance this script to work for more than one sequence file by using Microsoft's FileSystemObject.
The VBScript uses a DLL I created, which exposes the TestStand 2.0 Engine object as an ActiveX DLL. Before you can run the VBScript, you will need to register this DLL:
regsvr32 TSEngine.dll
Then, the VBScript can be executed just by double-clicking it. Hopefully this helps get you started toward creating an automated way of solving this problem!
David Mc.
National Instruments
Attachments:
ts2seqfiles.zip ‏4 KB

Asus G1 & kernel 2.6.23 : one step backwards

Similar Messages

Maybe you are looking for