Asus IPIBL-LB expansion card for usb3.0?

I am trying to upgrade my aging HP a6152n PC once again. I would like to increase USB throughput by upgrading to USB3.0.
I have windows 7 64 pro installed3 hard drives and have recently purchassed a external WD 4 TB mkybook to use as a backup. It works on the USB 2.0 port but it has the capability to run on USB 3.0. I would like to take advantage of the much higher throughput of the USB 3.0 if I can find a card  and driver that will work on my system.I tried a 4 port expansion card from Inateck but could not get it to work.   Windows device manager indicated Code 10 " This Device cannot Start"
Any Suggestiions or advice.   Thanks  wyuhasse

Wyuhasse, welcome to the forum.
Here is a card that says it is compatible with Win 7 32/64-bit.  There is a "Built-in 4-pin power connector for receiving extra power supply from system".  You should be certain to connect it.  Read the Customer Reviews to see what users have to say about it.
I suggest checking your Inateck card to see if it has the extra power connector.  If it does and it is not connected, this could be the reason for it not working properly.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

  • PCI ATA expansion cards for PM G4

    Hi Folks.
    So i bought a PCI ATA expansion card for my G4, but the bloody thing won't work. Despite having a Mac logo on the box, the drivers for the card are only compatable with Windows...
    My question is, are there any PCI ATA cards around these days that are Mac compatible and dont cost an-arm-and-a-leg?

    What brand/model is it?
    Here's an alternate card http://eshop.macsales.com/item/Sonnet%20Technology/THDMW/
     Cheers, Tom

  • USB Port Expansion Card for SDXC Slot?

    Are there any? I've seen plenty of 4-port USB PMCIA expansion cards... they're not compatible though, are they?
    TIA

    Not for the SD card slot. That's really a very limited, single-purpose device, not adaptable to the great variety of devices that PCMCIA or ExpressCard slots can serve.

  • Expansion Card for Palm 5

    Hi someone gave me a palm 5 but I need to know how I can get an expansion card and where. thanks
    Post relates to: Palm V

    The Palm V doesn't have a card slot.. 
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Expansion card for Zire 31+ the file pdb.

    Dear Madam/Sir.
    I own a palm one handheld Zire 31 and I purchase an SD expansion card of 2.0 GB witch should fit, but my handheld does not recognize the card, what should I do? my second question is it necessary to download the file with the pdb suffix in order to add any Software? Thanks and best regards Gidi.
    Post relates to: Zire 31

    Hi, and welcome to the Palm Community Forums.
    A 2GB expansion card will probably not work in the Zire 31.  That model is limited to 1 GB cards.  You might want to review this thread on the subject.
    A .pdb file is a data file, whereas a .prc is an application file.  What exactly are you referring to?
    Post relates to: Centro (AT&T)
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • SD Expansion Card for Tungsten E2

    Hi everyone,
    I naively purchased an 8GB SD card for my Tungsten E2, and when I put the card in the slot, nothing happened.  No indication that the Palm noticed its presence at all.  The card says AData Turbo on it, Class 6.  It has the notch and read-only lock switch mentioned in the Knowledge Forum's article on compatible vs. incompatible SD cards.  But the knowledge base doesn't have any specific compatibility information for the Tungsten E2 model.
    Evidently this card is incompatible, but how can I be sure of getting one that is compatible?  Is there a maximum size limit?
    Thanks,
    Rand 
    Post relates to: Tungsten E2

    ...or you can purchase a driver that will enable your devices to use modern SD HC cards.
    http://www.palmpowerups.com/readarticle.php?article_id=11
    Note: this is from a third-party vendor, and is not officially supported by Palm Inc.
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Need PCIE FW800 Expansion Cards For G5 Dual Core 2.0

    Hi Gang
    Seems like one is always behind the eight ball trying to get ahead.
    With the only available PCIe FW800 Multi Port Cards, they've taken away anything that offers more than 2 Ports. Everything is 2 PORT ONLY. There's nothing that I can find. And the prices for PCIe Multi Port FW800 Cards are a whooping triple of standard PCI Cards.
    The old issue;
    Do Not put a 3rd PCIe card directly above the video card - DO NOT. I've already had overheating which spilled above in regard to my older Single 1.8 Can I trust the better cooling of the Dual Core to put a PCIE card directly above the Video Card?
    If not, that leaves me with 2 PCIe Multi-Port Cards with 4 ports available total. But I need to read #5 External Storage drives total.
    Unibrain repeater was recommended here, but can I read all 5 drives simultaneouly? SATA Card alternative? No Can Do - because #2 of these older external drives DO NOT have SATA control.
    http://www.synchrotech.com/product-1394/firewire-hubs-repeaters07ub-firerepeater-800-pro.html
    OWC is NO HELP here;
    http://eshop.macsales.com/search/PCIE
    Any other ideas?
    Thanx
    Mike

    Hi direwolf
    Hi japamac
    Daisy Chaining (as stated by Steve), is not recommended. In fact, it's dangerous if you're depending on reliability for expensive, extensive Video Media. I would never ever do it again
    I actually did buy two of these from OWC;
    http://eshop.macsales.com/item/Apiotek/IE1007/
    BUT
    Got problems; The cards went in like a breeze, but they're NOT reading any of the external Lacie Drives. The Native 800FW port in the G5 reads just fine, but the PCIe cards are not reading the Lacie's. Yes they are recogized in the system profiler. But I've got a mystery on my hands right now.
    Mike

  • Thoughts on Inateck 4 Ports PCI-E to USB 3.0 Expansion Card for Mac Pro (Early 2008 to 2012 Late Version)

    Anyone adding USB 3 ports to the older Mac Pro desktop towers?
    I looked at HighPoint, Orinico and StarTek but I'm leaning towards Inateck given their recent PCI-E board update specifically for Mac Pro.
    Anyone have any USB 3 recommendations or horror stories?  I've got all 4 internal drive bays taken so I don't think I can easily get power to the board, so I'm hoping the internal PCI-E power will be enough for most USB 3 devices.
    thanks,
    Stephen

    There is one that seems to be popular that works with 10.8.2 and above.
    http://forums.macrumors.com/showthread.php?t=1501482&highlight=usb3+pcie

  • Best slot for new PCIe FW-expansion card

    Hi there,
    I just upgraded my PM Quad with a NVIDIA 7800 GTX 512 card which occupies PCIe slots 1 and 2.
    Now I will have to install a FW 400/800 expansion card for operation of an external audio interface. I know that slot 3 would probably offer the best performance for the next card to be installed (8-lane)- but is likely to obstruct proper air circulation for the fan of my graphics card.
    So slot 4 (4-lane) would be the only alternative. I cannot judge if this would be sufficient for proper audio performance.
    So, any comments from the audience?
    Regards,
    Oliver
    PPC mini, PM Quad 4,5 GB RAM   Mac OS X (10.4.7)  

    Great - glad to hear that.
    Just inserted my card into slot 4 - real plug 'n play - smooth operation - no complaints so far!
    O.

  • N wireless card for Mac Mini 1.66ghz

    What is the best wireless card for me to install to upgrade to N series wireless? Also is it always better to go 300 mbps vs. 150 mbps? (will be installing Snow Leopard OS). Thanks.

    See > Apple Mac Mini 1.66GHz Intel Core Duo (MA607LL/A) Expansion Cards
    For DIY, see > Installing Mac mini Model A1176 AirPort Extreme - iFixit

  • USB and Firewire Card for Mac Pro 3.0

    I am running out of USB and Firewire Ports. Any suggestions on expansion cards for Firewire and USB??
    Thanks
    John

    The Sonnet PCI USB Express cards have this problem too - for the record. Sonnet know about the MacPro not waking with it installed, as do Apple. I am sure Apple willl come up with something, I may even find a workaround, but it has always seemed that expansion cards with all my Macs [ waaaay too many] have produced unpredicatable problems.

  • Asus USB3.0 + E-Sata card for 2.8 8-core?

    I have a MacPro dual quad core 2.8 running 10.5.8. I'd like to add an e-sata card and more USB ports. I came across a dull-purpose ASUS u3s6 pci-e card that has 6G and USB 3.0 capability, but the Mac OSX is not listed in the compatible OS list. Has anyone used this card successfully without issues? Will it fit in my Mac? Thanks.

    NewerTech has SATA III controller.
    As always, MacSales is a good place to see what might be available, whether you like or buy there or not, check their listings.

  • Max Expansion card size for treo palm 700wx

    I can't seem to find the max expansion card size for a treo palm 700wx. I purchased a 4gb Scan Disk which should be compatible with most ever device so expect that the hardware dosen't support up to 4gb. If anyone has futher information on this I would appriciate it.
    Post relates to: Treo 700wx (Verizon)

    that I have used with no problem is a Transcend 150X Secure Digital Card 4GB.  My pictures and tunes along with backups reside on it.  Had it for a year. In use 2200.03MB with 1718.30MB free currently.
    Post relates to: Treo 700wx (Verizon)

  • Expansion slots for a Seritek pci express sata card

    I have a new Mac pro and just recieved a SeriTek/2SE2-E.". I have tried it slots 1.2.3 and none of them will mount or show the card. My new sonnet 4 port usb card shows in the ports. I have contacted OWC and they refered me to firmtek. I have not heard from them yet. I did try all there fixs on there web site but nothing helped.
    May be a bad card but not sure. My computer has the new firmware update but trying all slots nothing.
    Any ideas?
    Thank You
    Dcik

    Update on Firmtek
    I was in contact with firmtek this morning but nothing is resolved yet. They never responded back to me after 4 emails today and 2 phone messages.
    I have done everything the asked and the card will still not mount. I have downloaded the firmware and tried installing and the message is (no card for this utility to update)
    I followed the insructions. The only device connected to the computer was the keyboard and mouse.
    I have tried slot 2,3 and 4 with only the graphic card installed same messsage when trying to do the firmware up date (no card for this utility to update)
    I sent a system profiler to firmtek and that is when they told me to do the update but as you can see nothing resolved yet. The instuctions fro doing the update below.
    Driver and Firmware Install
    1) Run InstallPPC on PowerPC-based machines (G5) or
    InstallX86 on Intel-based machines (MacPro, XServe)
    2) Re-boot the machine
    3) Unmount and remove all drives attached to the controller
    4) Run SeriTek2SE2EFlasherNR
    5) Run FSCApp
    6) Reboot the machine
    #4 is where I am at it won't update.
    My last email to Micael at firmtek:
    Hello Michael
    Below is the communication I had with you Friday 4-11-08. Your last email to
    me was at 9:03 I have responded by email 3 times my last at 12:06 also I
    have made 2 phone calls to your customer service and left messages with
    return calls.
    It appears I won't hear from until Monday now. I am disappointed with
    firmtek not returning my calls and no more email since this morning.
    I am down with out being able to have access to all my external drives.
    I have tried one more thing this evening I removed the sonnet card and
    installed the firmtek in slot 4 and nothing is recognized. When trying to do
    the firmware update the same message: The message is no card for this
    utility to update.
    What is going on here could I have a defective card?
    Please get back to me so this issue can be resolved.
    Thank You
    Dcik
    I have done everything you said: When I try to run the seritek2sesflasherNR
    I get a message: there is no card for this utility. The card is in slot 3.
    My graphics card is in slot 1 and the sonnet 4 port USB card is in slot 4.
    What next??????
    Dcik

  • KT4 Ultra: conflict w/ expansion cards

    This is my first post, so please be gentle. I recently built new PC for photo editing and want to keep this old KT4 Ultra computer for general usage right beside. Both are running Windows XP Home SP3.
    My KT4 computer had HDD crash and after replacement and fresh istallation of XP I initially had following expansion cards inside:
    USB Expansion card (w/ 4 USB ports) on Slot 2 (INT B#)
    Realtek RTL8139 Family PCI Fast Ethernet NIC on Slot 3 (INT D#)
    Terratec EWX 24/96 Sound Card on Slot 6 (INT C#)
    Everything was OK until I wanted a LAN connection for sharing of files (mostly) and Internet (via cable modem) between these two. Instead of a broadband wired router I opted for a Gigabit Ethernet card installing it on slot 5 (INT B#).
    USB Expansion card (w/ 4 USB ports) on Slot 2 (INT B#)
    Realtek RTL8139 Family PCI Fast Ethernet NIC on Slot 3 (INT D#)
    D-Link DGE-528T Gigabit Ethernet Adapter on Slot 5 (INT B#)
    Terratec EWX 24/96 Sound Card on Slot 6 (INT C#)
    Somehow didn't want to have it on slot 1, so close to video card. Unfortunately after this the sound card was dropped by the system, a yellow question mark in Device Manager.
    Further I failed to instal my Bluetooth Dongle which I earlier had used succesfully for communication to my mobile phone. Now my Broadcom USB Bluetooth Device is put under Unknown in Device Manager.
    I did experience problems with the sound card several years ago in this very same PC. That time I knew little about system and BIOS setting and had to use another PC for audio purposes (digitalizing of tapes and vinyl).
    As reference I used the PCI Interrup Request Routing table, found on page 2-32 in KT4's manual. Funny thing is that Sandra XI tells now that my two Ethernet cards having both INT pin A# while by their slots they should be B# and D#. I don't have true understanding what this means though. In BIOS the PNP/PCI Configurations has all slot IRQs on Auto.
    Is this conflict easily cured by re-positioning card(s) on other slot(s) or addressing IRQ settings manually, and if so how and in which order? Or should I remove all the cards and install them in certain order...?
    I'm quite exhausted as I had some component issues with my new PC and now this KT4 once again rejects my sound card. Maybe I'm better off by installing it on my new PC, but then this failure with Bluetooth dongle, (which I put on the USB port of KT4, not on the USB exp. card.) Oh my, why can't sound card and ethernet card live together!?!
    I would appreciate your help very highly.

    Hope you get things like you want them!
    Eh, made this in 2003, but I'm not sure if it isn't more confusing than anything else:
    "The use and sharing of IRQs aren't mentioned in my MSI manual, (due to the APIC function I think), so I had to go to some ASUS manuals. As standards are standards, I believe things can't be to different. If someone has any addings or suggestions please come forward, so I can adjust the table.
    *Please note that this is generally speaking and mainly for ASUS boards a few years old!
    **Please note that you should not have any sharing with the IDE controller or similar!
    ***Please note that it is a good thing to have expansion PCI sound cards in slot 3!
    ****Please note that surprisingly enough it looks like PCI slot 2 would be free for any device, but AGP cards get hot and bigger so it is not a great idea.
    IRQ sharing table
    PCI 1 shares with PCI slot 5
    2 shares with AGP and PCI slot 6, or sometimes with onboard IDE
    3 shares not, or sometimes with onboard audio/modem
    4 shares with onboard LAN
    5 shares PCI slot 1
    6 shares with AGP and PCI slot 5
    AGP slot shares with PCI slots 5 and 6
    USB 1 shares with USB 2, 3 and USB 2.0
    2 shares with USB 1, 3 and USB 2.0
    3 shares with USB 1, 2 and USB 2.0
    USB 2.0 shares with USB 1, 2, and 3
    Onboard audio/modemshares not, or sometimes with slot 3
    Onboard LAN shares with PCI slot 4
    Onboard IDE shares not, or sometimes with PCI slot 2 "
    Normally it is best to let Windows or whatever OS you run do the job. Setting IRQ:s yourself is a (too) big assignment.

Maybe you are looking for