.asx files no longer open

When attempting to watch online streaming videos in a .asx format nothing happens. Previously they would open in quicktime using flip4mac. I've tried reinstalling flip4mac and rebooting and that doesn't do the trick. Repairing permissions did nothing as well. Any suggestions and is anyone else having this issue?

I haven't tried with .asx files, but I had a similar problem with .wmv files. I tried reinstalling flip4mac and it didn't work, but then I remembered to manually select the new QuickTime X as the default app for .wmv files and it started working normally again.
Maybe this will work for .asx files as well?

Similar Messages

  • BO Live Office - Excel files no longer opening

    Hi all,
    I've been running into a problem and only encountered it when installing BO Live Office. On my old computer, I used to be able to click on an Excel file that was on my desktop, for example, and then Excel would automatically open up and open the file. Then when I downloaded Live Office, I was no longer able to do this. Now everytime I click on an Excel file (no matter where it is located), I keep getting an error. Excel opens, but it tells me "There was a problem sending the command to the program."
    At first I thought it was just my computer messing up and or something else was going wrong, but now I'm not so sure. I just recently got a new computer and I tried out opening an Excel file (from my desktop, for example) and it worked. Then I went and installed Live Office with the latest FixPack, etc. Once I installed it, it would no longer let me open an Excel File by clicking on the file. I keep getting the same error - "There was a problem sending the command to the program."
    On my old computer, I had Office 2003 w/Windows XP and now I have Office 2007 w/Windows 7. It doesn't seem to matter if I have the latest software or upgrades/fixpacks. This error still occurs. I've tried turning off/disabling the Live Office Plug-in, but this has not worked either. Has anyone run into this problem before? I'm not sure how to go about fixing it. Any help would be appreciated.
    Thank you,
    Charlette

    Hi,
    I also had the same issue (from couple of months) after we upgraded and it was very very frustating until I saw this post.
    Thanks a lot Tracy.
    I added "%1" at the end in the field labeled u2018Application used to perform action:u2019
    "......\Microsoft Office\Office12\EXCEL.EXE" "%1" /e
    The excel files are now opening. But there is also a message along with it. It says as below.
    >>>
    Windows cannot find '<excel file name goes here>'. Make sure you typed the name correctly, and then try again. To searcg for a file, click the Start button, and then click Search.
    >>>
    It's odd that the file is opening fine even though the above message shows up. This happens to every .XLS and .XLSX file. Atleast the file is opening now, which is great!
    I am not sure how to fix the warning message.
    Any help is appreciated.
    Thanks again.
    Edited by: Prapoorna Kolan on Aug 24, 2011 5:20 PM
    Edited by: Prapoorna Kolan on Aug 24, 2011 5:21 PM

  • Cp4 - project (.cp) files no longer open

    Hello folks,
    Since upgrading to Windows 7 64bit, I can no longer rely on the integrity of Cp4's project files. Again, I have another three .cp files that will no longer open in Captivate 4. When I attempt to open them, absolutely nothing happens... that means no error message, nothing...
    But I know the files are not actually 'bad' because they will all open successfully in Captivate 5.5 beta. Unfortunately, neither 5.0 nor 5.5 offer backwards compatibility in Export or Save As.
    I have also tried opening the .bak file (renamed) and previous backups. It seems to have become corrupted during the last major change.
    I have encountered this problem far too many times. Perhaps it is time to finally upgrade to Cp 5?
    Has anyone else encountered similar difficulties?

    You could try creating a new Captivate 4 file (Keep the same dimensions)
    Then try importing the slides, File / Import / Slides/Objects and select the 'corrupt' file and see if the slides are appearing there to import . I've had issues in the past and this normally gets round it.
    If all else fails feel free to send a copy up to yousendit.com (or another similar site) and PM me the link, i'll take a look at it for you
    On my laptop I cant open a particular Captivate 4 file (Think memory issues) yet it opens fine on my desktop PC.  The file 'opens' but theres no slides or anything, the toolbar says the name of the Captivate 4 file but theres no slides.
    Cheers
    Paul

  • .zip files no longer open

    I just downloaded the automatic update to version 3.6.9 of Firefox but I can no longer open .zip files on a certain page which I access using Firefox. I am using 7-zip. Normally, I would just click to open them, but now the screen flashes black for less than a second, not allowing them to open.
    Any ideas? Thanks.

    I just downloaded the automatic update to version 3.6.9 of Firefox but I can no longer open .zip files on a certain page which I access using Firefox. I am using 7-zip. Normally, I would just click to open them, but now the screen flashes black for less than a second, not allowing them to open.
    Any ideas? Thanks.

  • My music files no longer open...

    The icon next to each music file has changed colour ( black on white to white on blue symbol) & iTunes no longer opens files with the blue & white symbol, Any ideas please??

    I'm having a similar problem, if you could help me out.
    I just barely installed Office 2011 on my Mac (10.5.8) and now I can't access any of my old word documents.
    When I try to open them, it says it is "blocked from opening in this version".
    when I open it from word (file-open), it says that it's locked for editing by another user, and I can only open it read-only. When I click read only, it says
    "word cannot open this document. the document might be in use, the document might not be a valid word document, or the file name might contain invalid characters."
    just an hour ago, when i had the old version of word installed on my computer I could access all of these files, but now I can't open any of them. Any ideas?
    Any help would be appreciated.
    Thank you! Merry Christmas!

  • .nef files no longer open in Photoshop CS3

    Hi
    I have  Nikon D60 and recently started shooting in raw when I discovered that Photoshop allows you to then edit the files to a much greater extent before converting them to .jpg.
    .nef files used to open automatically in Photoshop (in a separate window, seemingly a sort of add-on designed for raw files?). Now when I try, the software tells me that they are 'the wrong kind of document'.
    What's changed / broken? Or have I suddenly forgotten a vital step....?
    I've tried downloading a newer version of camera raw, to no avail...
    Thanks for your help

    The D60 was first supported by Adobe Camera Raw version 4.4.
    Make sure you update your ACR (Adobe Camera Raw) plug-in to the latest (and last) version of that plug-in compatible with CS3, which is version 4.6.

  • Post external hard drive crash, imovie6 files no longer open despite all data being present

    my external hard drive crashed.
    Thanks to ontrack, I recovered most if not all of the data, and this included the iMovies, I was told, but not one iMovie will open.
    The data size is the same as when they were functional. Yet, when clicking on the icon for the movie, it opens and then I see a prompt that says, "A project file is missing..." If I ignore all, the movie never opens. I dont ignore all, the movie does not open.
    My questions:
    (1) can I fix these files myself? If so, how?
    (2) If this is too hard for a novice, is there a company who can look at priceless imovie files and fix themquestion
    (3) is this a lost cause?
    I've lost upwards of 15 imovies (and the countless hours and love put into each). I'm willing to go to some lengths to fix them, including paying someone.
    Thoughts/advice/suggestions?
    Thanks.
    Damon

    I'd like to amend my original post... This should be helpful to anyone out there...
    my external hard drive crashed.
    I DID NOT have documents backed up properly.
    ....I KNOW....
    sigh...
    Thanks to Ontrack, I recovered most if not all of the data, and this included the iMovies, I was told.  Yet, when trying to open each file, none will open.
    I've tried almost everything, including:
    (1) show package contents (and trying to drag and drop "TimelineMovie.mov from cache to new iMovie)(nothing happens when dropping it into the new iMovie--quicktime opens but then nothing)
    (2) show package contents (and clicking on the backup copy with ~ in the file name)(again, nothing happens)
    What I know is the following:
    (1) The data size is the same as when they were functional.
    (2) Yet, when clicking on the icon for the movie, it opens and then I see a prompt that says, "A project file is missing..." If I click "ignore all", the movie never opens... i see it loading, loading, loading, and then it stops about 3/4 in.
    (3) If I dont "ignore all", the process is the same.
    (4) when I go into the media file, i see that all of the data is there
    (5) while my new external hard drive(S)...lol... have plenty of space, my current macbook pro is maxed out and I operate with just under 1gb of available memory
    My questions:
    (1) do I have any hope here?
    (2) If so, how do I fix these priceless files myself? I know, if priceless, why not backed up?  again, sigh...
    (3) If too hard for a novice, is there a company who can look at priceless imovie files and fixes them?
    Again, I've lost MANY imovies (and the countless hours and love put into each). I'm willing to go to some lengths to fix them, including paying someone.
    Thoughts/advice/suggestions?
    Thanks.
    Damon

  • Canon .MXF Files no Longer Opens in AE

    This is for .MXF files shot on a Canon XF300.  Things were working fine, but suddenly I am unable to open those mxf files in AE CS6.  Even projects previously created with AE CS6 now won't open, and give me the 'file damaged or unsupported' error message in AE. The file locations are identical.   I've found workarounds, but they fall a very long way short of the convenience of using Dynamic Link from the Premiere Pro CS6 timeline.  There are lots of hits if you Google, but most go back a version or two, or suggest converting the MXF clips to an AE friendly format.  Like I say... doable, but it used to work fine, and I'd love to fix it so I can get back to using AE direct from Premiere Pro.  Any help would be much appreciated.   [EDIT]  Other file types are working fine.

    Hi Klaus, and thanks for responding.   When I first got the error, I went back to older comps made with MXF files from the same camera, and now they are problematic as well, but not in the same way.  Any new MXF file I try to use in AE, whether from a PP timeline, or open directly from the AE projects panel, gives me the 'file damaged or unsupported' error message.  One of the older projects created with MXF files does in fact open, but is badly broken up when scrubbing the AE timeline.  That seems to be similar to problems I've found with Google.  It used to work fine, and now it doesn't. AE is 11.0.2.12  which I suspect is a new version than when I made the last project.  System is Win7  3039K @ 4.2Ghz, 32Gb RAM, and GTX570.  Project drive is raid0 with two 2nd gen Velociraptors.  One other raid0 drive.  Lots of drives totalling 14Tb.    It won't be the end of the world if I have to transcode a few clips, but it used to work, so I'm thinking it should be fixable.

  • .dmg files no longer open in the finder

    I just did an archive and reinstall (to solve some unrelated problems). Most things seem fine, but now .dmg files show up on the desktop without any icon, and when I double click them they open Disk Utility instead of mounting in the finder.
    It's possible to mount them from within disk utility by selecting the .dmg file and clicking on "open" ... but this is an odd bunch of extra steps, and it seems like something's wrong.
    in get info I tried to change the default app to the Finder, but it wouldn't let me.
    I've repaired permissions, rebuilt the directory with disk warrior, restarted, etc. .. no luck.
    any thoughts?

    The application to choose in "get info" >>"open with" is "DiskImageMounter".
    -mj
    [email protected]

  • Multiple DomainSite files no longer open after Lion upgrade

    I have at least 6 separate Domain.Sites.2 files that use for domains that I maintain using iWeb. Since I upgraded to Lion last week, I've discovered that no matter which DomainSite file I've tried to open, it continues to open the last site that I worked on before my system upgrade.
    Have I lost the ability to use those files?
    I'm in big trouble if there's not a fix for this! Big trouble!!
    Thanks for any help,
    Bob

    Here's another solution to your issue:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Numbers and Pages files no longer open on iPhone

    I'm using version 2.4.2 of both Numbers and Pages on an iPhone 4S in iOS7.1.2.  All of a sudden none of my old files will open.  There is no error message; just nothing happens when I try to open them.  Has anyone else experienced this?  I'm wondering if the new version of Numbers and Pages only work in iOS8.  I'd rather not upgrade yet unless I'm sure that will fix the issue.

    Ok, after syncing with iTunes again everything magically started working again.  Very strange.

  • Old photo files no longer opening in iPhoto

    iPhoto won't open photos from 2002-4 taken on a Canon: they were loaded into my iPhoto Library some years ago and used to open just fine, but recently the files show as empty frames, with an exclamation mark when double-clicked. The actual files are still there, in their same old location in the Finder, and they *do* open in Preview.  These are regular .jpg files, about 1 Mb in size. iPhoto will open about 1 in 20, so it's not that the whole batch is uniformly bad; also there's no problem with the several thousand photos I've taken, and that are in the Library, since 2004. I've tried rebuilding the Library, repairing permissions, starting a new library etc. - but iPhoto just doesn't like them.  Anyone got a diagnosis and remedy?

    Latest iPhoto, v.9.5. New Library: same result. But all files that iPhoto balks at ('sees' them, but warning exclamation point and not opened) open happily in Preview.
    (A thought: maybe I should try Loom. But iPhoto really should be able to handle these files if Preview can.)

  • Project files no longer open

    Hello. All of a sudden, for no apparent reason, all my iMovie 08 project files have become unusable. If I click them, they open iMovie but only to show "My first project" in the upper left pane. The project itself doesn't show up. None of my previous projects show up. Events still do show and seem normal. Any ideas on how to fix this?

    This is not an isolated incident. I contributed to another thread on this topic which curiously had the subject header 'How do I export a selected still from my iMovie?'
    I will copy my comments below with those from the person who initiated the post...
    Miranda watson
    iMovie quit on me several times as I was doing final edits on a movie I'd been working on for 20 hours over the past 3 days... It literally vanished from the list and isn't even in the finder (as if it never existed!) ... Every other film on the Project Library, etc. has stayed in place, even bits of newer stuff I had imported more recently to start work on.... And as I know iMovie self-saves constantly, I would expect slightly earlier versions of it still to be there... but, NO!, it seems to have utterly erased itself! How on earth do I retrieve my evaporated movie?? There must be a ghost trace of it somewhere! Please help! I put my soul into creating this film and feel heartbroken if it is lost for good. Something about the process cannot be repeated. Many thanks.
    Kirsty JB
    Hi Miranda
    I wish I had some offering of help to make but sadly I only have a similar tale of woe. I just got off the phone with Applecare and they said that there was nothing they could do unless I had my timemachine operating - of course I disconnected it to bring in the event media and forgot to plug it back in during my first moment of imovie excitement - doh! I suspect the support guy thought that I was quite insane, so I just wanted to let you know that you were not.
    The strangest thing is that even in the Leopard finder, 'search' 'for today' was completely blank for the project name - it seems truly to have evaporated.
    I will keep my eye on this post - I hope a smart person comes by with something for us both.
    Cheers
    Kirsty

  • PDF files no longer open in browsers.  10.6.8 and 10.7.4

    Some time ago my Safari and Firefox sites stopped opening PDF's in 10.6.8.  I went to a genius who said there were no viruses, but he couldn't figure out what to do.  Today, I upgraded to 10.7.4; but I still have the same problem on my MAcBook Air.   I  would hate to have to erase my drive and reinstallnOS 10.6 and 10.7 and all other programs.......can any one help????

    Maybe this other discussion can be of help to you...
    https://discussions.apple.com/message/18739713#18739713

  • CS5 file will not open directly

    My CS5 .INDD (7.0.4) file no longer opens directly from the Finder or within INDD. When opening, the beachball begins spining and "Force Quit" indicates INDD "Is not responsive". After force quiting and re-opening INDD, the file opens as an unsaved file. I've tried coping and pasting the one-page document, into a new file, but the same thing happens.
    This all began when I attempted to create a "Package" of the document, using "File>Package". The package process would never complete and I was forced to force quit the program. The Package folder appeared to have all the files/fonts, but the resulting INDD file would not open, nor would the original INDD file. Although both will open as "recovered" files when INDD is re-booted.
    How can I repair my file?
    Thanks,
    Ray

    Ther first thing I would do is move EVERYTHING out of the InDesign Recovery folder to a safe location (don't delete it, yet) so that ID is not trying to recover anything on startup. Taht should allow the program to either open cleanly, or confirm that the crash did serious damage to the program and let you know that you need to reinstall.
    Once ID is open, try using File > Open... to open the files from the original locations. They may be damaged, also, and non-recoverable except from backups or the recovery data that you are preserving, if that isn't also corrupt.

Maybe you are looking for