Async interface needed out of Sync wsdl for communicting with idoc(async)

Hi all,
I have a scenario like this
1.the sender is a synchronous webservice(wsdl provided by the client)
2.the reciever is an async Idoc
I need to send the soap request message to the idoc.i dont need any response back,but the problem is its a sync async communication.
please suggest
Abhishek

Dear Bhavesh,
How can I modify the wsdl file as its created by the XI system itself and where to change the qos and how to change the url ?
This is the url of the webservice created in ID:
http://uk-sap-030di:50000/XISOAPAdapter/MessageServlet?channel=:BS_Exten_Wrnty:Send_EWSC_Invoice_Webservice&version=3.0&Sender.Service=BS_Exten_Wrnty&Interface=http%3A%2F%2Fnissanexwrn.com%5EMIOS_Webservice
Please suggest
Abhishek

Similar Messages

Need to download printer driver for 3510 with windows 10

I need to download printer driver for 3510 with Windows 10

Here is the link to the Deskjet 3510 drivers.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

A/V out-of-sync issue for FCP captures

I've read many of the out-of-sync posts on this board, most of which seem to indicate that the problem is usually caused by either dropped frames, bad timecode breaks, edit errors, or disunity between FCP capture and sequence settings, compared with audio sample rates for the underlying files.
My files, shot on my Panasonic AG-DVX100A in 24pa mode, result in perfect (except for the anamorphic screen size - see my next post!) Quicktime movie files, in perfect sync. It's only when I create clips from those files in FCP that the video and audio go out of sync. And the out-of-sync drifts; that is, the further you go in the clip, the more out of sync the sound and the video gets.
My camera is always set to the 24pa mode, which, by default, records only in the non-drop-frame mode, regardless of any other camera settings I may have selected. The audio settings in my camera (and in the resulting underlying QT files that are created when I capture in FCP) are 16-bit integer and 48.000 khz, as they are in both my FCP sequence presets and capture presets, so I don't think it's an issue of conflicting sample rates. My device control presets are for Firewire NTSC NDF (non dropped frame).
Given the above information, does anyone have any idea what else I might be doing wrong? I've already shot hundreds of hours of footage last year that worked fine. I don't know what I changed to cause this out-of-sync problem now, but I'm going bald tearing out my hair trying to figure it out.
Thanks in advance for your help!
- Mick Raton
Dual 2 GHz PowerPC G5 Mac OS X (10.4.7) 5 GB DDR SDRAM; Final Cut Studio 5.0.4; Panasonic AG-DVX100A

The dvd recorder was in the loop when the sync issue showed up. the dvd was in sync but the live stream, next in line, was out of sync. I have returned to using the older machine with xp. (the lap top is running vista) The older machine is a desktop which requires more space on the production table and time to set up.

Anyone noticed Quicktime 7.4.5 causing out of sync issues for online vids?

Since 7.4.5 all Quicktime video clips I view online in Safari have audio out of sync with the video (by perhaps four frames). Anyone else seeing this?

I do not use Safari. However, I have no problems w/out of sync issues using the +latest versions+ of FF, Camino & Netscape.
Have you tried other browsers to rule out Safari as being the culprit rather than QT? Are you using the latest version of Safari?
What troubleshooting methods have you tried to resolve your issue? Need this info to avoid the +"been there done that"+ senareos.

Out of sync audio for Blu-Ray

Okay first
Win 7 i7, 12 gigs of Ram, the right video cards....
I have 2 sequences the first is an awards show 2:24 mins all edited with lower thirds and credits. Native 1920 x 1080 29.97 .MOV. This I output from Premiere using H264 BluRay and down scaled to 720. It work fine in ENCORE CS6.
The 2nd sequence is red carpet and green room interviews 1920x1080 29.97 .MOV files all edited with titles and lower thirds. When I output this the same as the 1st sequence, H264 BluRay and down scaled to 720 and then import the files as a time line into ENCORE CS6 the audio is out of sync. In fact it is about 1 sec faster than the video it starts off in sync and drifts.
If I output this sequence at 1920x 1080 no down scaling to 720 then it is in sync but the whole project is then too large to fit on a single layer Blu-ray disc this is why I have down scaled 720.
I have re-output it 6 different ways and the only way I get sync is at 1080. It makes no sense to me because the 1st sequence down scaled with no sync problems at all.
I even dropped the edited sequence into a new 720 sequence and scaled to frame size then output that and still the audio is out of sync.
Let me say so there is no misunderstanding the audio is in sync on the premiere time line the problem only occurs when output to ether H264 Blu-ray or MPEG2 Blu-ray if I down scale to 720. If output to 1080 no sync problems.
I don't know what to try now but go to a dual layer disc and I really hate to do that and waste 20 gigs of space.
Any ideas?
Thanks
Dennis

If I output this sequence at 1920x 1080 no down scaling to 720 then it is in sync but the whole project is then too large to fit on a single layer Blu-ray disc this is why I have down scaled 720.
The only two factors which affect file size are bitrate and duration, specs like resolution and frame rate have no bearing.
Try using 1080 with a lower bitrate.

The video and audio are out of sync while watching movies with iTunes

Anyone know why iTunes is playing movies out of sync? I try to watch a movie on my pc with iTunes but the audio is faster then the video.
I have searched for an answer everywhere but haven't found one yet, so if someone could please help.
It is updated as of this post with 10.6.1.7

Repair your QuickTime.
Control Panel > Programs n Features > highlight QuickTime, click CHANGE then REPAIR

Adobe needs to develop an api for communicating with HTML Overlays & Indesign Objects

I'm a front-end developer who has been assigned the task of developing one of our client's DPS every month. While I praise Adobe for saving a dying a industry and giving non-developers simple GUI controls, they need to develop an api for communicating from HTML Overlays to Indesign MSOs and other objects.
I've had to do some intense animations/pages; which I in turn simply developed all in HTML5 and did an overlay. The time put into those pages could have been greatly reduced if their was a proper API in place to trigger different MSO and events. Is anybody at Adobe working on this? As DPS matures, and more developers are tasked with making folios it's imperative we have a proper way way to develop.

We had a page for embedded movies in a lightbox; the client said customers were complaining that the folios were too large and took too long to download. So we switched to youtube streaming page, but they wanted a poster and autoplay enabled. If you have ever programmed with mobile video, you'll know devices are extremely difficult to manipulate.
I had to do an html overlay with a bunch of transparent divs for hotspots and buttons. If I could have told Indesign to move different objects layer orders or go to a different MSO it would have saved me hours.
Doesn't DPS support localstorage? Couldn't you guys whip up a little api to trigger events via localstorage?
Off topic, another request:
- enable the safari webkit inspector for debugging connected ipads with folios that have html overlays; you guys don't fully support HTML5 or certain js events and it's extremely annoying and difficult to debug.

Sync errors for iPad2 with iOS5

Updated iPad2 to iOS5.
Now keep getting sync errors, like: cannot finish sync process.
Anyone with same problem and possible answer?

What the covers of the books is solved, you could just remove them and put them back again.
But the shared library, the more chapters or movies I put more chaotic it becomes...

Audio drifts out of sync encoding for DVD

I am using Compressor 3.0.5.
I have a DVCPRO HD file I'm trying to encode for a DVD.
Even if I use the default settings in "DVD: Best Quality 120 minutes," the audio and video are completely off by the end by several frames.
The source file was generated from FCP6.0.6, and that file doesn't have any drift issues. I have even successfully used Compressor to encode an H.264 file with no drift using the exact same file.
Why then are the m2v and the ac3 files so off then? They are even different lengths by several frames.
I've tried re-encoding the audio separately at 48K 24bit, (same as FCP settings) and that generated an ac3 that was 32 frames longer than the video, which was exported with the exact same in and out point.
I've even tried breaking it up into 5 separate reels to encode each one individually and then join them in DVDSP, but then each of the 5 separate reels are each off as well, anywhere between 5 to 8 frames by the end.
I spoke to Apple tech support, and they don't know why this is happening. Yet I see many people who have this experience and I can't find the solution. Please help!
I read one post that mentioned it might be using a cluster and multiple cores, so I'll try using a single next, but if anyone has a solution please let me know.
Thank you!

I've had the same issue. It seems to only occur when outputting a 23.98 sequence to Compressor using the cluster.
Another related question: Do the sync issues occur whether you use a reference Quicktime or self-contained?

A way to change sync computer for Iphone with out loosing everything?

Need to switch my main computer. Will I loose everything if I do so? Any way to avoid this?

Only iTunes content on your iPhone will or should be erased but won't be erased on your iPhone if you transfer your iTunes library from your existing computer to the new or different computer per the instructions included with this link along with authorizing the new or different computer with your iTunes account with iTunes.
http://support.apple.com/kb/HT1751
Photos transferred from the existing computer will be erased from your iPhone only if you select Sync Photos under the Photos tab for your iPhone sync preferences with iTunes on the new or different computer.
Photos and/or videos in the Camera Roll are not included or touched turning the iTunes sync process but a good idea to import this data with the computer before syncing as with any other digital camera.
No other data on your iPhone should be touched such as contacts especially if you don't have sync contacts with a supported address book application on your computer which is selected under the Info tab for your iPhone sync preferences.

Sync numbers for ipad with mac

Hey I just got an ipad 2 and the numbers app. I need to keep my databases in sync..ie updates on ipad should sync with mac and visa versa, please give me some advice on how this can best be achieved?
Chris

The only way I have found so far is:
Syncing from the Mac to iPad - you need to ADD the file to the iTunes file list, under File Sharing, for the appropriate App. This applies every time the file is changed on the Mac. If the file already exists on iTunes you will need to accept the overwrite option for the updated file. Next remove the file from the iPad and import the file again over WiFi from the Mac.
Syncing from the iPad to the Mac - highlight the file to be in sync [ for Pages and Numbers the file in the centre of the screen under My Documents ] and select the Transfer icon. Then select the option Transfer to iTunes. In iTunes you then need to select the file and click on the Save To button and then select where the updated file is to be saved.
The problem with transferring documents to the iPad etc. is that it needs to be attached to the Mac in order that the list of Apps and Documents that allow File Sharing can be seen. Strangely the only way to transfer files back and forth is via WiFi - not USB. Stupid really. Apple needs to sort this out as the current arrangement is rather amateurish.
Dezzar

Need AV or IS Software for Mac with Windows apps?

I would like to know if it is advisable to install anti-virus or Internet security software on a Mac if you run both Mac and Windows applications. I ask this question because I understand that those programs may not as necessary for Mac applications only but I wonder if the Windows applications that I installed under Parallels Desktop 7 will cause the computer to be vulnerable. I also wonder whether in installation of the AV or IS software will protect both the Mac and Windows virtual machines. Thanks

Antivirus software for OS X is not necessary. However if you run MS Windows in any fashion meaning via Boot Camp or virtualization software such as Parallels or Fusion then you should treat the MS Windows installation as you would ANY MS Windows installation, in other words install antivirus software for MS Windows! The good news is even if your MS Windows becomes totally diseased this will in no way affect the OS X installation.
In your case because you have installed Windows in Parallels then get yourself some antivirus software for MS Windows and install away. You can resist the urge for antivirus software for OS X though for many reasons, first an foremost is there are zero (none, nada, zip) viruses for OS X. While there are some trojans out there for OS X they are few and far between. The primary difference between a Trojan and virus is that Trojans must be downloaded and installed by the user. The lesson to learn here is only download from trusted sites and any site that tells you to download something should be approached with a great deal of caution. In other words if you aren't sure don't do it and come to a these forums and ask. The next reason OS X doesn't need antivirus software is most take up a lot resources on your computer and slow it down, and finally many tend to create more problems than they solve. If you still aren't convinced then download ClamXav, it's free, unobtrusive and kept up-to-date.

How Do i sync office for mac with contacts,calendars for mac

I am trying to integrate the MS office for mac and the standard mac calendar and contacts. i would like them to sync as i use outlook for emails and Calander in mac and appointments don't sync nor can i get the contacts to sync.
Please help

Sim[le answer is that you can't. Unless and until Microsoft add the functions needed to Outlook. Right now if you want to sync Microsoft Outlook you'll need to use Microsoft Exchange

Is there any way to sync Outlook for Mac with iPhone? I have tried everything but not successful. Apple says it is not possible to sync contacts from Outlook for Mac to iPhone 5. Any help will be much appreciated.

Is there any way to Sync contacts from Outlook for Mac to iPhone 5? Apple support says that only iTune can only sync contacts from "Contact" which is the default contact of Mac. If one is running Outllok on a Mac machine then it is not possible to sync the contacts with iPhone. It is strange that Apple distributors are promoting and offering machines with promise that Windows users can now run MS Office on Mac machines without any problem. While this is true, it is so strange that one cannot sync the contacts from MacBook Pro to iPhone5. If someone has found a way to sync contacts from Outlook to iPhone 5 please help as it is very frustrating to not be able to sync the contacts. Thanks, Amit.

SEARCH!!!
http://lmgtfy.com/?q=sync+outlook+mac+to+iphone

Syncing Outlook for Mac with a hotmail pop accountto 'mail' on iphone, ipad and ipod

I'm using Outlook for Mac 2011, with a hotmail account set up as a pop account to my outlook inbox. I also have that same hotmail account set up on my iphone, ipad and ipod. Is there a way to sync my e-mail between Outlook for Mac and the 'mail' on my other devices, so that when I delete an email on my computer, it deletes on all devices?
I'm not so tech savvy and am happy to provide any additional information but am not sure where to start! I would appreciate any help you can give me.
Thank you

First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.
This user tip might help you understand how accounts work with Contacts (Address Book).

Async interface needed out of Sync wsdl for communicting with idoc(async)

Similar Messages

Maybe you are looking for