Asynchrnous Update for the report?
I know there is Asynchrnous Update for the chart in HTMLDB - if you enable it, and if the underlying data has changed, when the next update interval passed, you will see the chart updated with the new data. Does this feature also apply to tabular table report? I cannot find anything like this. If Asynchrnous Update works for the chart, I think it shoud be not difficult to make it work for the report, too. - don't know why oracle htmldb team hasn't provided this feature.
Hello,
If you put a example on htmldb.oracle.com it will be easier for people to help you out, tracking down javascript or html errors is easy if you can see it happen.
A lot of the AJAX (PPR) functionality is not documented as it was intended for use with the Application Builder or Integrated end functionality, this will be standardized/documented future versions, that doesn't mean that you can't piggy back off the functionality because it will be accessible in future versions, trust me I know one of the guys that helps build this stuff.
At the moment the forums/blogs/wiki are the best places to get further information about this, if you look at the example page there are links to the forum posts that asked for the example and insite into that particular feature.
Carl
Similar Messages
-
Data Migration Opening Balances are not updating in the Report F.08
Hi,
We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
Why they are not updating in the report. In which table can i check the Data migration values in the system?
Thansk
KishoreHi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
Why it is showing like that?
Thansk
kishore -
Update for the NVIDIA GeForce GTX 680MX 2048 MB for MacPro3.1 primo 2008?
Has there been an update for the NVIDIA GeForce GTX 680MX 2048 MB for MacPro3.1 primo 2008?
I have had the MacPro restarts due to internal problems and the fault report going to Apple shows it is the N NVIDIA GeForce GTX creates the problems.
I am running Apple products like Aperture 3.5.1 iTunes 11 etc…
Besides the cresting the overall performance is SLOW
My MacPro:
Running OS X 10.9.1. on the MacPro3.1 primo 2008, 2 x 2,8 GHz Quad-Core Intel Xeon
NVIDIA GeForce GTX 680:
Chipset-model: NVIDIA GeForce GTX 680
Type: GPU
Bus: PCIe
Kortplads: Slot-1
Bredde på PCIe-kanal: x16
VRAM (i alt): 2048 MB
Producent: NVIDIA (0x10de)
Enheds-id: 0x1180
Revision-id: 0x00a2
ROM-revision: 3731
Skærme:
CG246:
Opløsning: 1920 x 1200
Pixeldybde: 32 bit farve (ARGB8888)
Dublering: Fra
Online: Ja
Rotation: Understøttet
Cintiq 12WX:
Opløsning: 1280 x 800 @ 60 Hz
Pixeldybde: 32 bit farve (ARGB8888)
Skærms serienummer: 8HC000414
Hovedskærm: Ja
Dublering: Fra
Online: Ja
Rotation: Understøttet
Please advise :-)
/ Kim AndersenDear Ms. Andersen:
Evga handles GeForce GTX 680 MX. Apple has nothing to do with it. However, I can try to help you a little bit
go here for Evga's Mac support: http://www.evga.com/support/download/default.aspx
This is one of those video cards that needs 2 power cables connected to the mother board for it to work propertly. It needs 195 watts of power, which the PCI-E slot will not provide on its own. If you have the power cables connected up okay, then the only advice I can give you is to telephone EVGA and see about a possible replacement. Apple's policy, as I understand it, is to replace same with same, even if you have the money and are willing to pay extra. This is a 3rd party video card and as such, Apple is not responsible for any problems wth it. I don't understand either: based on my knowledge of Norwegian, your screen size is 1280x800 and your bit depth is 32 bit, and you have 2 gigs Vram, so you should have no problem.
maybe you have a bad card
good luck to you
JOhn b -
Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
2. Is there any way or an update for the manipulation of the color
curves like in Gimp or Paintshop?
Dankeschön für jede Antwort die weiter hilft!!Hey Rich,
It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT. One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph. I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other. Most of the properties have been made invisible through the graph properties. You can still see the legends however. One caveat to this is that you will have issues accessing the different graphs. You have to do it from a VBScript. The following line of code worked for me:
Call GraphObjOpen("2DAxis" + Str(NewAxis))
Where NewAxis is a variable that defines which graph I want to look at. You would of course have to loop through the graphs as you add data.
Cheers,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~
Attachments:
12PlotStack.zip 12 KB -
Hi Gurus,
While executing the program S_ALR_87013105 (Detailed Reports
For Sales Order : Plan/Actual Comparison ) system showing the selection log.
"Have no authorization for the report/table 7KU6_001 and 7KU6_002".
But for the user the authorization check through SU53 was successful.
Pl can any one suggest on this issue.
Thanks in advance,
VijayHi,
Contact your basis consultant to provide the missing authorisation. This is one of the authorisation object.
Regards,
Sankar -
just downloaded aperture 3.4 update for the app store and now it wont open please help!!
Just want to echo this complaint.
I have tried re installing Aperture 3 and I've looked for preferences or something to clear, but nothing helps. It continues to crash each time I open it no matter what. -
Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before. -
I got a new mac with lion on it and I transfered all my stuff from the old mac to the new one. When I went to use iwork the programs did not work anylonger (I do own the disc and tried reinstalling but no good). I found the update for Keynote on the apple site and that solved the problem for keynote. Then I saw the update for the whole iwork program and tried to do that as well but it won't let me run it because it says I have a newer version of Keynote already installed. How do I get the update to work or how do I get the same type of update for numbers and pages individually? Thanks!
Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash -
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
my iphone 4 after ios 5.1 update. had error updating.my phones now in recovery mode. usb to itunes when switched on.doesnt recognise. after update done.yes updates itunes.trued different usb ports. etc . for restore .but nothing.says my phones backed up in preferences.on itunes.but can get back up.i recall doing a firware update for the last os 5.0 update..but forgot where the link was .do i have to buy a new phone ?
UPDATE: I attempted to bypass activation using the emergency call 112 to get into the homescreen, but the call failed, in fact, even 911 will not go through and give me a call failed. (before you yell at me for dialing 911, I'm a firemedic )
-
Problem in Getting Count answer for the report in OBIEE 11g..
Hi friends,
I created a report in OBIEE 11g, but i'm not getting the correct answer as i expected...I'm getting answer in presentation services but the answer is wrong..
I'll explain to you with an example report: Suppose in the report "NATIONALITY COUNT IN DEPARTMENT WISE" manner
i dragged the Nationality column from per_all_people_f which is dim table and i dragged the column that i applied aggregation rule "count" for the column "nation count" from per_all_assignments_f which is fact table......If i viewed answers means i'm getting correct answer
(i.e.) nation count per Nationality..........
NATIONALITY<---------------------->NATION COUNT
AUSTRALIA 40
INDIA 20
AFRICA 10
USA 5
The above is the answer I'm getting with out including the department column from hr_all_organization_units...........
But since according to the report i need count in department wise manner, so for that along with nationality and nation count column i dragged department column from hr_all_organization_units which is dim table and also i hide that column as i dont want to view the department column in answers..........
If i clicked answers, means then I'm not getting the nation count for the nationality......... I'm getting the answer 0 for each and every nationality, if i included the hided department column
NATIONALITY<----------------->NATION COUNT
AFRICA 0
AUSTRALIA 0
INDIA 0
USA 0
I'm getting answers like the above if i include the department dimension column which is in hided manner.........................
What is wrong with it........Whether i made any logical mistake for the report.....If so guide me friends..........
Cheers,
Harry...........Hi,
you said about writing query in DB.......whether U meant of trying checking the query in toad..or something else..........
Since im giving only one join from dim to fact in the physical diagram........
But more than one join exist between those dim and fact, but im giving only one join mainly the primary key column of the dimension table to the fact table....Whether i need to give all the joins that exist(even if it has 2 or 3 joins between those fact and dim) tables....
If i give count distinct means it is giving count for every nation as 1....like i mentioned below
NATIONALITY<----------------------------------------------------->NATION COUNT
INDIA---------------------------------------------------------------------1
AUS------------------------------------------------------------------------1
CAN------------------------------------------------------------------------1
Since you said to check about depts of the particular column....i couldn't able to understand about "depts" that you meant????
Whether i made any logical mistake...........
thanks,
Harry...
Edited by: HariPrasad on Oct 10, 2010 9:55 PM -
Display the total number of rows for the report in OBIEE 11g
Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacneCheck this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful -
Last night i was downloading the new update for the Iphone4 on my laptop through Itunes. After the download was done, it was starting to install, and then an error came up and didnt get a chance to check it. Now my Iphone is stuck on the screen with the USB pointing to the Itunes Icon and wont do anything else. Any advice on how to get this fixed, or do i need to go to the Apple store and have them look at it.
slawdog31 wrote:
Is the sleep wake button at bottom center of the Iphone or on top?
Top
iPhone User Guide -
Reporting Services offers limited support for using AlwaysOn Availability Groups with report server databases. The report server databases can be configured in AG to be part of a replica; however Reporting Services will not automatically use a different
replica for the report server databases when a failover occurs. How to overcome this issue? is there any workaround for that..
RahulHi.
With the AlwaysOn listener you should have a single DNS name to connect to regardless of which cluster node is active. Are you using the listener service? If not, please refer to the link below.
http://msdn.microsoft.com/en-us/library/hh213417.aspx#AGlisteners -
I am running Lightroom 6 in conjunction with 64 bit Photoshop CS6. I need to install Camera Raw 9 plus other relevan updates for the Adobe Design and Web Premium CS6 package. Running Adobe Application manager finds the relevant updates but won't download / install them. Clicking the update button results in an error message "Application Manager has stopped working". This is a windows system running 64 bit Windows 7
update manually:
pre cc updates: http://www.adobe.com/downloads/updates/
cc updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
cc 2014 updates: win (http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html) / mac (http://prodesigntools.com/adobe-cc-2014-updates-links-mac.html)
Maybe you are looking for
-
Projects, albums and books have disappeared!
Something has happened to my Aperture Library-- I'm not sure itf it was before or after the 1.1.1 update, but I've lost tons of images, albums and books. The really odd thing is that they don't show up in Aperture-- but they do show up when browsing
-
Cant find converted/saved files
Finally converted pdf to .doc, but cant find converted files. where are they stored and how do i access them?
-
whenever i click on the link i desire to open the new window opens with some advertisement which i do not want
-
Why report is always select statement...
hi guys, when we are dragging the columns from Business Area or in any reporting tool, and when we see the SQL, why it gives always select query. this question is raised by one of my manager having 15+ years of experience in Oracle Apps. Any suggesti
-
OracleJSP: An error occurred. Consult your application/system administrator
hello friends, i installed a soa patchset 4 (7272722) over soa suite 10.1.3.1.0 in a solaris sparc machine.the installation was sucessful.i followed the docs during the installation like running the scripts etc. after finishing the installation the b