Asynchronous call in OSB

Hi, I was trying to call a business service in an asynchronous way. I used publish action but I can´t get the response of the service. It seems it just work with one-way services like a file adapter. Any help please.

When you say you are making an asynchronous call, then you would not care about the response.
If you are looking for a response from the service then you should use a service callout instead.
Let me know if my understanding is incorrect.
Thanks,
Patrick

Similar Messages

How to handle Asynchronous calls using OSB?

Hi There,
How to handle Asynchronous calls using OSB?
Please help me out??
-Venkat

Hello friend, here is what you need.
Oracle Service Bus, invoke asynchronous webservices | Oracle .. Java .. OpenSource .. SOA

Asynchronous calls in OSB

HI I have a requirement to make a asynchronous proxy service calls. I have gone through some of the articles found in the forum on the workarounds to achieve this requirement.
my question is--
1. Why does OSB not support asynchronous proxy service calls?
2. Are all versions of OSB WS 1.2 compliant?

In case OSB is SystemA, you can invoke a One-way webservice by either publishing or routing.
In Case OSB is SystemB, you can define the interface as One Way. Additionally, if you want you could persist the messages in a queue and consume from another Proxy service.
What is the issue you are facing?
Regards,
Fabio Douek

Problem asynchronous call in osb

I create a publish action but the publish behaves synchronously, I've tried many ways and in any case the call asynchronous. Any idea? Thanks

I create a project for this test:
1. DB procedure with sleep 10 seconds (no xa driver)
2. Jca adapter
3. Business service over jca
4. Proxy service with a publish action to business service
The duration of the service is always 10 seconds, I try calling a proxy service in the publish to

Is there a way to process multiple asynchronous calls individually (instead of all at once)?

Hello,
I have a function that saves a record using a RPC call (asyncToken with a new responder). When I save an individual record (pressing "s" key), it works fine. However, when I attempt to save multiple records simultaneously (bound to "v" key) (I have a for loop running through the selectedItems in the datagrid), it performs strangely.
For anyone who hasn't experienced this, the successive calls seem to get stacked (literally - i.e. using a stack) and processed at the end of all operations in that block of code (I had trace functions before and after the call that were executed before I saw the result confirming this).
What I would like to do is to simulate multiple AsyncToken usages with a single click, but still have them all occur individually since right now, the function saves the last item in the stack 8 times instead of saving each of the 8 items separately.
OR
Is there another means of RPC using something like "interruptToken" as opposed to asyncToken? (In most other areas I've seen, asynchronous calls are performed as interrupts and dealt with immediately, thats why this procedure confused me for a bit)
Thanks in advance,

The second paragraph you posted is definitely worthwhile - still figuring out some of the inner workings of Flex calls (not just RPC stuff) that I use as I am pretty new to flex.
I don't have the code with me at the moment, but I think I have to use separate calls to the save function. My situation is this (and I plan on updating with code on Monday if necessary):
I have a datagrid that is populated using a single RPC (which is loaded into an arrayCollection first then the datagrid). Changes are made to the datagrid through a copy/paste function that I made, but these changes are only reflected on the datagrid (i.e. not in the dataprovider). When the user hits "save", the selected line (selectedItem actually - i.e. not an index but the object itself) is passed to another class which contains a modified version of my "modify data" function (brings up a dialog after choosing a given line allowing editting/validation of certain fields regarding the selectedItem). This changed version of "modify data" is then called and immediately closed effectively saving this record (without allowing the user to alter fields - so they don't have to hit save twice).
With the copy/paste function, I make all of these changes en masse and then have a loop that goes something like
for each (_object:Object in myDatagrid.selectedItems)
callSaveFunction(this, _object);
which ideally loops through the data and saves each item that has been changed. If there is a way to save all of the data in the datagrid simultaneously, I would appreciate a bit of help there (perhaps dealing with the bindings - right now I have the object I save as the destination and the source is myDatagrid.selectedIndex.[field name]).
Good to know about the other stuff, though - my understanding was a little bit lacking before

How can we tell if a VI is already running before calling Start Asynchronous Call?

The new Start Asynchronous Call node is awesome for spawning multiple instances of reentrant VIs. However, I've stumbled a bit in using it for non-reentrant VIs. The old practice of using the "Run VI" method would allow us to check the Execution.State of the VI before invoking the method to run it. That way if the State was Running or Run Top Level, we could skip the invoke node and just use a property node to open its front panel. WIth the Start Asynchronous Call node, it looks like we have to use a strictly typed static VI reference, and when we open the VI reference, the VI gets reserved and its Execution.State = Running. So, how can I tell if it is not just reserved by the thread but actually executing before making a redundant Start call?
By the way, the redundant Start has interesting behavior. It will actually cause the targeted VI to be executed again after it stops. Even if you hit the Abort button on the target VI, it will immediately execute again and again equal to the number of times the Start Asynchronous Call node was run. There's nothing wrong with that, and I suppose the simple answer is to just go back to using the old "Run VI" method. It's just that the ability to wire up those inputs directly to the connector pane is so nice. Perhaps I am missing something obvious. Oh, I am referring to the Call and Forget mode (0x80).
Thanks,
Dan
Solved!
Go to Solution.

Just throwing it out there, I know I'm a year.5 late on this but if it's a psuedo-modal dialog or some other window that you only want a single instance visible at one time, you can check the FP.State property on the strictly typed vi reference. If it's loaded and visible to the user it will be "Standard", if it was closed or not opened prior then the state will be "Closed".
I think the standard behavior of serializing execution on another thread would be great for doing a pre-set number of iterations with a sub vi in a non-blocking sort of way but for sub vi's meant for UI interaction checking FP.State works.
Philip
CLD

Notify an application user that an asynchronous call of a bi publisher report has been completed

Hi experts,
We have an ADF application (11g) from where we call BI Publisher (11g) reports by using bi publisher web services.
I have the following 2 requirements:
Run the reports asynchronously
Notify each user that the report which has been asynchronously called has been completed.
My thought was to use the scheduleReport web service which is asynchronous by default.
My problem is how to notify only the specific user using "http notification" that the report is ready.
http://docs.oracle.com/cd/E28280_01/bi.1111/e22259/reporttriggers.htm#BIPDV008
Can you please help me on this?
Regards,
Dimitris

I've converted the Blob to a Clob but still can't get it to appear in the BI Report. It shows up in the XML file as a bunch of text character, but in the report if I use the fo: instructions it remains blank, and if I don't, it shows the same text data that is in the XML file.
Perhaps BI Reports aren't meant to show database images? Is there another tool I can use instead (data is in APEX 4.0) 11g.?

SOAP Receiver Adapter (Asynchronous Call)

Hi All,
Scenario is Proxy to Webservice asynchronous call.
Scenario configuration is done as follows.
1) Imported the WSDL and using as a asynchronous inbound interface.
2) SOAP receiver channel is configured with the target URL & soapAction as given in the WSDL as (soap address & soap Action).
3) Configured the proxy server details as required.
SOAP channel is successfully sending the message to the application as DLVD.
But the issue is target application not receiving the data. What could be the reason ? I am wondering , i have tried with the external tool like Altova XML Spy & SOAP UI sending data to the webservice & it's working fine.
Please suggest me if anything which can help to resolve this issue.
Thanks
Ashwin

In this case you can do the following:
1. start your tcpmon or TCPGateway, add there a listener e.g. on port 9090
2. configure the target URL in TCPGateway for this listener
3. configure the target URL in your XI SOAP Receiver Adapter to http://<ip of TCPGateway>:9090
4. now execute the scenario again in XI
(make sure XI can reach your TCP Gateway, e.g. check Proxy)
I have used this method successfully for error tracking. In some cases it is necessary to add 2 listeners in TCPGateway and route e.g. 9090 to 9191 and from there to the end (I did not analyse why).
Then you will be able to see what XI is really sending and you will see the full response from the partner side. You can then compare the XI request data with those which are sent via soapUI. This should give a clue about the problem.
CSY

How to move files in background (asynchronous call)?

Hello
I would like to make an an Asynchronous call to the Move.vi for moving files as a background process.
I am having the following problems:
- The static VI Reference as input to the Open VI Reference function asks for a path to the VI to be called, but I can't find it. Where exactly is Move.vi located?
- The Type Specifier VI Refnum node accepts VIs via drag and drop, but only from an explorer window, not from the LabView VI palette. Again, I need to know where to find Move.vi. Or is there another way to specify the connector pattern?
It all works, if I call Move.vi from within a wrapper VI (because I know where to find that), but for the sake of simplicity I would like to avoid that step.
I'd appreciate any suggestions, also alternative approaches for moving files in the background.
Sebastian

Move is not a VI, but a primitive, so you can't call it like that. As you've seen, the wrapper method works.
Try to take over the world!

Unexpected loop behaviour with asynchronous call

I am having trouble with loop behaviour when using an asynchronous call.
I am building an application to record simultaneously temperature (NI USB-TC01 thermocouple), displacement (DC voltage, read from an Agilent 34401a) and resistivity (using a Keithley 2400 sourcemeter).
I am using a voltage sweep function on the Keithley 2400 to alternate current direction in a sample and measure the voltage drop - this is a common technique for eliminating thermal emf from resistance measurements. But what you need to know is that I set the number of current cycles I want and then wait for the instrument to measure and return the meausurements - up to 50 samples, which takes nearly 30 seconds. With the other two measurements, I have to programmatically call a measurement vi for each sample I want.
I have set up my application to asynchronously program the resistivity measurement and then wait for the response, and I want to in parallel measure temperature and position until the resistivity is done. I then want to record the mean and standard deviation for each signal. I used an event structure to interrupt the temperature and position measurements when done.
The problem I am running into is that after the first resistivity measurement is completed and I go to do the second one, the loop that measures temperature and displacement only runs twice, so I only get two samples, regardless of how many resistivity samples I want to collect. For example, if I want 50 resistivity samples at a time, the first iteration will measure rougly 40 samples of temperature and displacement, but any subsequent iterations will only measure twice.
I know this is probably overwhelming to understand the operation, but can anyone help? I have attached my code ('Delatometer') as well as a test vi I built that uses the same structure but has no interactions with instruments ('asynchronousCall').
The
Attachments:
Delatometer.zip ‏221 KB
asynchronousCall.zip ‏29 KB

I forgot to mention...the test vi that I uploaded executes as expected, so I am thinking that maybe its an issue with the instrument calls? I also found that if I run the Delatometer program in 'highligh execution mode' it runs properly, and it is my understanding that in 'highlight execution mode' there is no multi-threading.

Problem about asynchronous call: subVI front panel doesn't pop up when called.

Dear All,
I'm new to LabVIEW, and this is the first time I try to use the asynchronous call.
I'm using LabVIEW 2011.
I want to build a directory for several VIs, and it should allow users to open more than one of the VIs at the same time by pushing the buttons. Before building this directory, I simply tried to use asynchronous call to call a VI form another VI, but found a big problem.
I followed the steps in the help file, created a strictly typed reference, set the option to x80 because I don't need the return. When I run it for the first time, it worked fine: the subVI popped up and run. Then I closed the subVI. But for the sencond time and on, when I run the caller VI, the subVI didn't pop up, instead it seemed to run silently on background because when I manually opened it from the file I found it running. Besides, I didn't find any option like "show front panel when called" of the asynchronous call.
The caller VI and subVI are attached. The address of subVI in caller VI should be changed accordingly.
What should I do to make it work properly? Thanks very much for any idea!
Solved!
Go to Solution.
Attachments:
asynchronous_call.vi ‏8 KB
boolean.vi ‏7 KB

Jeff·Þ·Bohrer wrote:
A better approach is to set the vi properties programaticly like this:
Jeff, you will be happy to know that I used this tactic in full force on a project recently (lots of dialogs in this program). Not sure how many LabVIEW reboots it has saved me from. Reuse VIs made it even easier to do.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can we call a OSB proxy service from a BPEL process?

Hi,
I want to call a OSB proxy service from a BPEL process. Can you please explain me the procedure?

Get the wsdl of the OSB proxy service and create webservice parnerlink in BPEL based on this wsdl to invoke the service
To form the wsdl url, copy the Endpoint URI configured to the proxy service(just click on the proxy service in the console) from the sbconsole - /ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService
Pre append <<protocol://OSB Hostname:OSB Port>> - http://localhost:8000/ and post append with ?WSDL
The final WSDL url look like - http://localhost:8000/ATHGPUM_GlidePathService/ProxyService/ATHGPUM_GlidePathProxyService?WSDL
Regards
Albin I

Asynchronous call to web servie using pl/sql

1) How do I make an aynschronous call uisng pl/sql. I am currently using utl_http.
But it is expecting me to get repsonse using utl_http.get_response.
Is there anyway I can make asynchronous call to web service? Please give me examples if any.

Web services are NOT asynchronous as the HTTP application protocol is not asynchronous. A web service cannot (as an sync callback event) initiate a call to the web browser (client app) - as the web browser does not have a tcp listening endpoint. The web service must respond using the EXISTING tcp session established via a connect() call from the browser.
PL/SQL code executes in a dedicated or shared server process. Execution is serialised. So asynchronous calls are not supported and non-existent. Again, async processing requires some from of notification (callback event, message handler or signal interrupt handler) to inform the main process (while it is executing code), that the async call has completed.
And this does not exist in PL/SQL processing for very good reasons. (Oracle would have been one of the most unstable products on the market if it did support async PL/SQL processing, as 99% of developers would not understand how to use it correctly, and would have severely violated the fundamental concurrency and MVCC principles)
What can be done via PL/SQL (and SQL) is parallel processing - not to be confused with async processing. The API in PL/SQL to use for that is DBMS_PARALLEL_EXECUTE. You can also self roll this using DBMS_JOB or DBMS_SCHEDULER.
No default IPC exists for inter process communication between parallel processes. If IPC is needed, it needs to be manually coded using a standard SQL table (where row locking provides for mutexes and semaphores), or something like DBMS_PIPE.

Error handling / logging with asynchronous calls

Hi,
I want to log every error my app might throw. I thought it would be sufficient to surround either the launch method or the start method with a try...catch. But it doesn't work as excepted.
If an error occurs in an asynchronous call, e.g. in a button click, the exception is never caught.
Do you have an idea, how to solve this?
Example:
import javafx.application.Application;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class TestApp4 extends Application {
    public static void main(String[] args) {
        launch(args);
    public void start(final Stage stage) throws Exception {
        try {
            final VBox root = new VBox();
            Button button = new Button("Click");
            button.setOnAction(new EventHandler<ActionEvent>() {
                @Override
                public void handle(ActionEvent actionEvent) {
                    int i = 0;
                    int a = 5 / i;
            root.getChildren().add(button);
            Scene scene = new Scene(root);
            stage.setScene(scene);
            stage.show();
        } catch (Exception e) {
            // do logging here
            e.printStackTrace();
}

I'm not 100% sure how it works, but what I am pretty sure is that these Exceptions in EventHandlers are caught by JavaFX itself inside the JavaFX thread. They have to, because if they let the exception bubble up to the top, the FX thread would end (and with it, all response in the UI). It is probably caught at the level where Events are triggered somewhere (my guess is inside the QuantumToolKit).
Anyway, these exceptions are printed to System.err -- if you can redirect that stream to a log file or whatever you can have them all in one place. The error stream can be set in your application simply by calling System.setErr().
Note also that exceptions occuring in a Task are stored in the exception property -- sometimes these can be hard to find as they are put there silently -- you'll need to check your Tasks for exceptions and print them.

What is a gateway proxy?? what are synchronous and asynchronous calls?

bapis are rfc enabled. but are there any other rfc's available in sap? what is a gateway proxy?? what are synchronous and asynchronous calls?

Hello:
Lets st art at the beginning.
There are NO documented viruses that affect a Mac running OS X - none (there are instances of Malware).
Gateway GEO-IP/BOTNET Alert
This is a Youtube video that explains what you have (I assume you installed it somehow) on your computer:
http://www.youtube.com/watch?v=JwRi2me2hSk
For openers, I would uninstall any A/V software you have put on your system. It is certainly possible that that junk has put some other stuff on your computer.
I'm also afraid my computer might have been hacked?
Highly unlikely.
Barry

Asynchronous call in OSB

Similar Messages

Maybe you are looking for