At CRS-1,how can i use show command with pipe | ?

HI,ALL
when I use show command with pipe on the CRS-1,the command invalid
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |errors 
                                                                   ^
% Invalid input detected at '^' marker.
========================================================
But Previously on the cisco 7609,I can use the show command
GZ-DM-SR-1.MAN.7609#show int | include line |err
Vlan1 is down, line protocol is down
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 interface resets
Vlan11 is administratively down, line protocol is down
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 interface resets
Vlan99 is down, line protocol is down
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
     0 packets output, 0 bytes, 0 underruns
     0 output errors, 0 interface resets

RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |errors 
                                                                   ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |?    
| 
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | |?
                                                                    ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | ?
  begin    Begin with the line that matches
  exclude  Exclude lines that match
  file     Save the configuration
  include  Include lines that match
  utility  A set of common unix utilities
  <cr>    
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |
% Incomplete command.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |errors
                                                                   ^
% Invalid input detected at '^' marker.
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#                                     
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | ?   
  begin    Begin with the line that matches
  exclude  Exclude lines that match
  file     Save the configuration
  include  Include lines that match
  utility  A set of common unix utilities
  <cr>    
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line |?
| 
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line | include er$
Thu Jan 15 22:36:24.120 GMT
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#
RP/0/RP0/CPU0:JA-DL-CR-1.MAN.CRS-1#show interfaces | include line           
Thu Jan 15 22:37:05.013 GMT
Loopback0 is up, line protocol is up
Loopback1 is up, line protocol is up
Loopback6 is up, line protocol is up
Null0 is up, line protocol is up
POS0/0/0/0 is up, line protocol is up  (APS not Configured )
POS0/0/1/0 is up, line protocol is up  (APS not Configured )
TenGigE0/0/4/0 is up, line protocol is up

Similar Messages

  • How can I use the NI PXI-6508 with Lab View 7? what are the first steps to get started??How can I use the channels with lab view 7????

    I have a 8 slot PXI system with 2 NI PXI 6508 and 1 DMM 4070 in it. I want to get started with programming the digital I/O cards (6508)! How can I use this cards with LabView 7?what is the best way to get started, or where can I get examples showing how to use the several channels?
    Thanks!
    Philipp

    Philipp,
    The best way to get started is to decide if you want to use traditional NI-DAQ or NI-DAQmx. Recently we released NI-DAQ 7.1 which provides NI-DAQmx support for the PXI-6508. In my opinion, NI-DAQmx is more efficient and much easier to use.
    To get started with examples, simply launch LabVIEW and go to Help>>Find Examples. Then expand Hardware Input and Output>>DAQmx and select the appropriate digital group for your application. This should help get you started.
    Please repost if you need addition assistance. Good luck with your application!

  • How can I use Local SPAN with RSPAN ??

    How can I use Local SPAN with RSPAN ??
    I want to mirror traffics from ISP-A and ISP-B to Anomaly-detector module.
    so I had configured like this...
    C6500-A
    vlan 1000
    name RSPAN
    remote-span
    monitor session 10 source interface Gi5/1 - 2 rx
    monitor session 10 destination remote vlan 1000
    monitor session 20 destination anomaly-detector-module 3 data-port 1
    monitor session 20 source remote vlan 1000
    interface GigabitEthernet1/13
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1000
    switchport mode trunk
    no ip address
    C6500-B
    vlan 1000
    name RSPAN
    remote-span
    monitor session 10 source interface Gi5/1 - 2 rx
    monitor session 10 destination remote vlan 1000
    interface GigabitEthernet1/13
    switchport
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1000
    switchport mode trunk
    no ip address
    end
    but it was not working..
    it wasn't any change of input packet hit count when
    I'd enter a command 'show anomaly-detector module 3 data-port 1 traffic'
    was upper configuration wrong..?
    Can I use VACL configuration ?

    try to change "monitor session 10 destination remote vlan 1000 " to "monitor session 10 destination anomaly-detector-module 3 data-port 1 " on C6500-A

  • How can I use an iPad with two itunes accounts?

    How can I use an iPad with two itunes accounts?
    Hi there
    My partner has a works iPad, which has her works Apps on (ones that are specifically made by her company and are NOT available in the App store).
    What I want to be able to do is to ALSO have my itunes account on there so that I can put all the apps I have purchased previously from my iPhone on it.
    This is so I can put on VLC player (thats already in my itunes account) so I can add videos to the iPad.
    How do I do this please?
    I tried it before by connecting it to my mac, but it wiped everything off the iPad completely and also deleted the data settings for using 3G.
    So I want to avoid this happening again the future as it had to be sent back to her head office to be sorted again.
    Any advise please?
    Thanks

    You can't. The iPad is desgined to be a 'one user' device and only really works with one apple ID at a time.
    The only way would be if she, at work and with her work apple id, downloaded your apps (repurchasing them of course).
    It's not meant to be a multiple user/multiple ID device.

  • How can i use text expander with the new Mavericks,

    how can i use text expander with the new Mavericks,

    I regret upgrading to mavericks for the same reason
    ftamez wrote:
    how can i use text expander with the new Mavericks,
    Now I have been searching - and you have to buy an app and it will cost you $34.99 (what a rip off)

  • How can i use "icloud backup" with ios 4.2.1?

    How can i use "icloud backup" with ios 4.2.1? I tried to update my ihpone 3G wih the newest IOs. Seems not to be possible.

    You cannot.
    It requires ios 5.
    Your iphone can only go to 4.2.1

  • How can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?

    Hi!
    I have a OSB cluster. I need to read a view with the DBAdapter. I use SequencingPollingStrategy to implement the adapter.
    Then I import it into OSB and make it work and the service works normally in the single node.
    But if I import it into OSB cluster, the service always read the duplication records from the view.(the Distrbute polling is not worked in SequencingPollingStrategy )
    So how can I use the DBAdapter with SequencingPollingStrategy in OSB Cluster?
    Thank you!

    Nope. Version 5 is a fashion accessory: it looks like software, but it doesn;t actually do anything. Sort of like a sports car with a lawn-mower engine. Looks snzzy. Doesn't really work. (And given how buggy it is, I should further specifiy that the lawn-mower engine comes with a blade: it chews up your old templates, produces files that cannot be sent as email attahcments [yes, really], and—this just in—doesn;t play well with the new SMB facility of Mavericks. In short, as one reviewer put it, "un unmitigated disaster."

  • How can i use MS word with MAVERICK

    how can i use MS word with MAVERICK?  None of the MS Office applications work with new IOS!!!

    What version of Microsoft Office Mac are you running?  You probably just need to update it to the latest release:
    http://www.microsoft.com/mac/downloads?pid=Mactopia_Office2011
    Office 2011 Mac's latest version is 14.3.8 for instance.

  • How can one use Mission Control with two monitors?  Please bring Spaces back

    How can one use Mission Control with two monitors.  With Spaces I could treat each space as a single desktop.
    SyBB

    I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
    Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

  • How can i use jpg extension with forms 10g and webutil

    I have a form with webutil and i want to open imege jpg extension but thier are Bmp but my
    image jpg and image item has no jpg extension .
    How can i use jpg extension with forms 10g and webutil ?

    You can use the JFIF image format for jpg files.

  • How can i use 3D Features with 256 VRAM

    How can i use 3D Features with 256 VRAM

    Well, in theory you *could* install Photoshop CS6 version 13.0 and not update it.
    Is your video card replaceable?  They don't cost that much.
    -Noel

  • How Can i use Html frames with  simple JSP???

    How Can i use Html frames with simple JSP???
    Actually i am creating an application in which i have used Index.html as frame.
    Noew i am trying that if i click on a link of one frame(say menu frame) the \result shoul come to some other frame(say frame named mainwindow).
    Hoe can i do like this???
    Anand Pritam

    Well i am using..
    < Base target="mainwindow">
    But it is no working is there some other way??

  • How can I use srvctl command line for change "Failover type" and "F method"

    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.

    user10674190 wrote:
    Hi all,
    I am using Oracle One Node (11.2.0.3), and I have a service:
    /u01/11.2.0/grid/bin/srvctl config service -d orcl
    Service name: orcldb
    Service is enabled
    Server pool: orcl
    Cardinality: 1
    Disconnect: false
    Service role: PRIMARY
    Management policy: AUTOMATIC
    DTP transaction: false
    AQ HA notifications: false
    Failover type: NONE
    Failover method: NONE
    TAF failover retries: 0
    TAF failover delay: 0
    Connection Load Balancing Goal: LONG
    Runtime Load Balancing Goal: NONE
    TAF policy specification: BASIC
    Edition:
    Preferred instances: orcl_1
    Available instances:
    I would like to change "Failover type" and "Failover method" to:
    Failover type: SELECT
    Failover method: BASIC
    How can I do that? Is there any graphical tool for it? Or, How can I use srvctl command line for change it?
    Thanks in advance.
    Leonardo.srvctl modify service -d database_name -s orcldb -q TRUE -m BASIC -P BASIC -e SELECT -z 180 -w 5 -j LONG
    Also see
    11gR2(11.2) RAC TAF Configuration for Admin and Policy Managed Databases [ID 1312749.1]

  • How can I use the ScrollTablePane with kodo ?

    How can I use the ScrollTablePane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.

    Marco-
    I am not familiar with any "TableScrollPane" classes. Can you clarify
    whether this is some 3rd party custom component, or something you have
    written?
    Note that we do not provide any pre-build graphical data components with
    Kodo, but we do intend to provide some examples in the future.
    In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
    >
    How can I use the TableScrollPane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.--
    Marc Prud'hommeaux
    SolarMetric Inc.

  • How can I use the TableScrollPane with kodo

    How can I use the TableScrollPane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.

    Marco-
    I am not familiar with any "TableScrollPane" classes. Can you clarify
    whether this is some 3rd party custom component, or something you have
    written?
    Note that we do not provide any pre-build graphical data components with
    Kodo, but we do intend to provide some examples in the future.
    In article <cl1hn7$9ep$[email protected]>, Marco Aurelio Bueno wrote:
    >
    How can I use the TableScrollPane with kodo, taking a result Query as
    a Collection and throw it into the ScrollTablePane , if it not possible ,
    Is there a Component which I can do it ?
    Thanks , Marco Aurelio.--
    Marc Prud'hommeaux
    SolarMetric Inc.

Maybe you are looking for

  • Contacts and calendar disappeared?

    All my contacts and calendar events have just disappeared. I only have the iPad mini so I am not connected to any other device. I can't even enter a new event on my current blank calendar. How do I get my info back? Thanks

  • Images in jar file, Please help!!

    Hello, This is my code, I am trying to add images to buttons in ToolBar. The code along with images works if I say "java ABC", but dont work(images dont appear) when I jar the files. I have tried all the possible methods, Please help me.           ne

  • Do i have to register my ipad air

    I just bought a I Pad Air do I have to register it for warranty? if so where do I do that.? Thanks 

  • Macbook Pro 1st gen Unibody Firewire 800 problem

    Recently I notice when I hook up a hard drive to my firewire 800 port and daisy chain another drive my mac pops up an error stating that the drives were ejected incorrectly.  I wasn't trying to eject a drive just daisy chain an additional drive.  Is

  • Itunes won't recognise Ipod touch 5G

    So this is for my friend who has a 5G, but her Itunes won't recognise the ipod touch 5G, but windows can recognise it, Itunes says to reset the Ipod touch, and she has done this before, and now again it won't recognise it, so she has to reset it, and