At End Of Error.
Hello Freinds,
I am using At End Of..End At in my code but I am getting a runtime memory error.
the code is
SORT gi_itab1 BY prctr poper ryear ktext.
gi_itab2[] = gi_itab1[].
CLEAR : gi_itab.
REFRESH : gi_itab.
LOOP AT gi_itab2 INTO gw_itab2.
AT END OF prctr.
SUM.
APPEND gw_itab2 TO gi_itab2.
ENDAT.
ENDLOOP.
I am getting error at the point APPEND gw_itab2 TO gi_itab2.
The data is also just of 2 records.The data is not passing and also I am getting memory error.
Please point out the mistake in code.
Hi Jaydeep,
This error is coming because of the infinite loop.
You are looping at the table gi_itab2.
and inside the loop you are appending the work area to the same table gi_itab2.
so,this loop will not end and going to infinite loop which results in runtime error.
try appending to another internal table gi_itab3.
(APPEND gw_itab2 TO gi_itab3.)
Hope this will help.
Regards,
Swarna Munukoti.
Similar Messages
-
Transport control program tp ended with error code 0212
Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
service: transport service
start : online
Function: TMS_TP_SHOW_BUFFER
message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t : Test. All database changes are rolled back.
-t4 : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory -
XML Publisher Report Bursting Program ends in error
We have a report that generates the XML output (ACH notification)
In the after report we have a call to the Bursting program.
The ACH notification completes with the correct output but the bursting ends in error showing
Set Bursting parameters..
Temp. Directory:/tmp
[101211_072452383][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[101211_072452385][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=28081235, user-variable:cp:language=en, user-variable:cp:responsibility=50274, user-variable.OA_MEDIA=http://xxx/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=28081235, user-variable:cp:locale=en-US, user-variable:cp:user=xxx, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=28081236, user-variable:cp:org_id=83, user-variable:cp:reportdescription=xxx ACH Payment Nofitication}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
--Exception
/tmp/101211_072452427/xdo1_2.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/101211_072452427/xdo1_2.pdf (No such file or directory)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at java.io.FileInputStream.<init>(FileInputStream.java:66)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:523)
at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
The temp directory variable in the XML Publisher is /tmp which has all the permissions.
The control file calls the delivery method (email 123 in the example) and uses the following template
<xapi:document key="" output-type="pdf" delivery="123">
<xapi:template type="rtf"
location="XDO://XBOL.ACHPAYNOTIF.en.US/?getSource=true" filter=""/>
</xapi:document>
This template is defined for English language and Territory United States.
I covered everything I could find here and in metalink and still cannot make it work.
Any ideas?Hi;
Similar issue mention at below notes, Please review:
NPE Error While Bursting Using XDOBURSTREP in EBS R12 [ID 754790.1]
Bursting Engine Ends With Java.Lang.Nullpointerexception[Article ID 559443.1]
XDOBURSTREP - XML Publisher Report Bursting Program Fails with InvalidPropertyValueException[Article ID 603424.1]
If its not help I suggest rise SR
Regard
Helios -
The report l runs very night and gets ended with error
Dear all,
I am facing a problem in solution manger. There is an report (Program/Command RDSMOPSOL_MONIREFRESH ) will runs very night and get ended with error and there is Run-time error "MESSAGE_TYPE_X".
Please suggest how to solve the problem.
Is this report is necessary for the system because it is not mention in the sap stand jobs.
SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
SM:CSA SESSION REFRESH
No. Program/Command Prog. type Spool list Parameter User Lang.
1 RDSMOPSOL_MONIREFRESH ABAP &0000000000876 BASIS EN
Sm21 log
00:00:50 DIA 00 000 SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
00:30:57 BTC 08 200 BASIS R68 Perform rollback
00:30:57 BTC 08 200 BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
00:30:57 BTC 08 200 BASIS AB1 > Short dump "081112 003057 sapsm BASIS " generated
00:30:57 BTC 08 200 BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
00:30:57 BTC 08 200 BASIS R68 Perform rollback
00:30:57 BTC 08 200 BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... T Transaction Problem
Development class... SABP
Further details for this message type
Module name......... abdynpro
Line................ 1133
Error text.......... ab_jmess
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
a.. MESSAGE_TYPE_X
Technical details
File................ 000048
Position............ 0000253620
Entry type.......... l ( Error (Module, Row) )
Message ID.......... AB 0
Variable parts...... ab_jmess abdynpro1133
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.11.08
00:30:57 BTC 08 200 BASIS AB1 > Short dump "081112 003057 sapsm BASIS " generated
etails
ecording at local and central time........................ 12.11.2008 00:30:57
ask................ 05312 . 08 B8 BTC background processor No. 08
ser................ BASIS
lient.............. 200
erminal............
ession............. 1
ransaction code....
rogram name........
roblem class....... K SAP Web AS Problem
evelopment class... SABP
BAP Mini dump
ate................ 20081112
ime................ 003057
ost................ sapsm
ser................ BASIS
ocumentation for system log message AB 1 :
A short dump was generated for the specified program termination.
You can analyze this short dump in the system log evaluation by
selecting this line or evaluating Table SNAP (Transaction ST22).
echnical details
ile................ 000048
osition............ 0000253800
ntry type.......... s ( ABAP Runtime Error )
essage ID.......... AB 1
ariable parts...... 081112003057sapsm BASIS
Time Ty. Nr Cl. User Tcod MNo Text Date : 12.11.08
00:30:57 BTC 08 200 BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081112003057sapsm BASIS 2001 )
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... K SAP Web AS Problem
Development class... SDYN
Module name.........
Location............
T100................ 00 671
Parameters..........
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a
termination message from the application (MESSAGE Axxx) or by an
error detected by the SAP System due to which it makes no sense to
proceed with the transaction. The actual reason for the termination
is indicated by the T100 message and the parameters.
Additional documentation for message 00 671
ABAP/4 processor: &
No documentation exists for message 00671
Parameter
a.. MESSAGE_TYPE_X
00:30:57 BTC 08 200 BASIS R68 Perform rollback
Details
Recording at local and central time........................ 12.11.2008 00:30:57
Task................ 05312 . 08 B8 BTC background processor No. 08
User................ BASIS
Client.............. 200
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... W Warning
Development class... STSK
Further details for this message type
Module name......... thxxhead
Line................ 1240
Error text..........
Caller.............. ThIRoll
Reason/called....... roll ba
Documentation for system log message R6 8 :
An error has causes an SAP rollback. All database updates are reset.
Technical details
File................ 000048
Position............ 0000254520
Entry type.......... m ( Error (Function,Module,Row) )
Message ID.......... R6 8
Variable parts...... ThIRollroll bathxxhead1240
Regards,
ShivaHi karteek,
I have check there is Switch of operation mode but when I have checked the t-code sm63 there is no new mode are in normal mode.
There is one thing I want to ask dose this report (Program/Command RDSMOPSOL_MONIREFRESH ) run in your system or any one server because I have think there is some problem in job shued
and is also not mention in the sap stand jobs.
there is an error in sm21 in job.
BASIS SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:
BASIS SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was specified
Is this SM37 log
Job started
Step 001 started (program RDSMOPSOL_MONIREFRESH, variant &0000000000875, user ID BASIS)
Opening and closing session started. Session SM2000000000065
Opening and closing the session was successful. Session: SM2000000000065
Opening and closing session started. Session SM2000000000005
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Sm21 log
SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
BASIS R68 Perform rollback
BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS AB1 > Short dump "081111 003056 sapsm BASIS " generated
BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111003056sapsm BASIS 2001 )
BASIS R68 Perform rollback
BASIS R49 Communication error, CPIC return code 017, SAP return code 223
BASIS R64 > CPI-C function: CMINIT(SAP)
*BASIS SM36 EFK BP_CHECK_REPORT_VALUES: Invalid program values found. Reason:*
*BASIS SM36 EFC > Program RDSMOPSOL_MONIREFRESH has no variants, but a variant was*
specified
BASIS R68 Perform rollback
BASIS AB0 Run-time error "MESSAGE_TYPE_X" occurred
BASIS AB1 > Short dump "081111 220948 sapsm BASIS " generated
BASIS D01 Transaction Canceled 00 671 ( MESSAGE_TYPE_X 20081111220948sapsm BASIS 2001 )
Details Page 2 Line 6 System Log: Local Analysis of sapsm 1
Time Ty. Nr Cl. User Tcod MNo Text
00:00:51 DIA 00 000 SAPSYS EEA OPERATION MODES: Switch to operation mode Normal triggered
Details
Recording at local and central time........................ 13.11.2008 00:00:51
Task................ 04100 . 00 D0 Dialog work process No. 00
User................ SAPSYS
Client.............. 000
Terminal............
Session............. 1
Transaction code....
Program name........
Problem class....... S Operation Trace
Development class... SBTC
Sm63
Start/end time Name of the active operation mode
00.00 - 01.00 Normal
01.00 - 02.00 Normal
02.00 - 03.00 Normal
03.00 - 04.00 Normal
04.00 - 05.00 Normal
05.00 - 06.00 Normal
06.00 - 07.00 Normal
07.00 - 08.00 Normal
08.00 - 09.00 Normal
09.00 - 10.00 Normal
10.00 - 11.00 Normal
11.00 - 12.00 Normal
12.00 - 13.00 Normal
13.00 - 14.00 Normal
14.00 - 15.00 Normal
15.00 - 16.00 Normal
16.00 - 17.00 Normal
17.00 - 18.00 Normal
18.00 - 19.00 Normal
19.00 - 20.00 Normal
20.00 - 21.00 Normal
21.00 - 22.00 Normal
22.00 - 23.00 Normal
23.00 - 00.00 Normal
Regards, -
Bursting Program Ends in Error with nothing in the Log file
Hi All
I have a RDF which calls a bursting program in After report trigger, the problem i'm facing is that the bursting program is completing successfully for a set of parameters and when again the program is run for the same set of parameters the bursting program is ending in error, i have checked the log file but nothing in the log file
below is my log file
+---------------------------------------------------------------------------+
XML Publisher: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
+---------------------------------------------------------------------------+
Current system time is 30-SEP-2013 15:11:15
+---------------------------------------------------------------------------+
XML/BI Publisher Version : 5.6.3
Request ID: 574533
All Parameters: Dummy for Data Security=N:ReportRequestID=574532:DebugFlag=Y
Report Req ID: 574532
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:T1DEVEBSAPP1
Preparing parameters
null output =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574533.out
inputfilename =/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Data XML File:/u01/oracle/CRP2/inst/apps/CRP2_t1devebsapp1/logs/appl/conc/out/o574532.out
Set Bursting parameters..
Temp. Directory:/tmp
[093013_031118656][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
[093013_031118657][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=574532, user-variable:cp:language=en, user-variable:cp:responsibility=20678, user-variable.OA_MEDIA=http://t1devebsapp1.travelzoo.com:8001/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=574532, user-variable:cp:locale=en-US, user-variable:cp:user=SETUPUSER, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=574533, user-variable:cp:org_id=81, user-variable:cp:reportdescription=Travelzoo Invoice Print Selected Invoices-Child, user-variable:cp:Dummy for Data Security=N}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
602
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 30-SEP-2013 15:11:41
+---------------------------------------------------------------------------+
and the output says..
"Error!! Could not deliver the output for Delivery channel:null "
Wondering What might be the issue, any help on this is greatly appreciated.
-RagulRam,
Is this a custom or standard concurrent program?
Was this working properly before? If yes, what changes have been done recently?
Did you try to relink the concurrent program executable file and see if this helps? Also, you could enable trace/debug and submit the request again and see if more details are collected in the logs -- See (Note: 296559.1 - FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12).
Regards,
Hussein -
Dear all,
i am using bea weblogic 10.0 ant i am downloading the running Inventory.
but the below problem occurc when i run ant task for downloading that is
ant -buildfile propagation_ant.xml downloadSrc the below problem occurs. i am new to bea so how can i debug the problem
VERBOSE: InventoryTreeWalker: visiting node: Application:ContentServices:BEA Repository:ContentNodes:Webmasters:Sports:I won`t step down from presidency Khan.txt
ERROR: The Propagation operation ended in error.
java.lang.reflect.UndeclaredThrowableException
at weblogic.security.providers.xacml.authorization.XACMLAuthorizerMBeanImpl.policyExists(XACMLAuthorizerMBeanImpl.java:245)
at sun.reflect.GeneratedMethodAccessor477.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.p13n.security.internal.SecurityProviderProxy.invoke(SecurityProviderProxy.java:48)
at $Proxy54.policyExists(Unknown Source)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:241)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:239)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.kernelRunAs(SecurityPolicyDelegate.java:433)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.policyExists(SecurityPolicyDelegate.java:246)
at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.getSecurityPolicy(RDBMSSecurityPolicyManager.java:204)
at com.bea.p13n.entitlements.management.SecurityPolicyManager.getSecurityPolicy(SecurityPolicyManager.java:119)
at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicy(SecurityHelper.java:146)
at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicies(SecurityHelper.java:122)
at com.bea.propagation.content.online.hierarchy.ContentNodeHierarchy.discoverChildren(ContentNodeHierarchy.java:113)
at com.bea.propagation.framework.hierarchy.ListNodeHierarchy.getChildrenNodes(ListNodeHierarchy.java:113)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:215)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:158)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:102)
at com.bea.propagation.framework.tool.io.InventoryTreeExport.walkDepthFirst(InventoryTreeExport.java:88)
at com.bea.propagation.framework.tool.io.InventoryFolderExport.walkDepthFirst(InventoryFolderExport.java:110)
at com.bea.propagation.framework.tool.io.InventoryArchiveExport.walkDepthFirst(InventoryArchiveExport.java:103)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:1017)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:991)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation_Remote(InventoryManagementServlet.java:510)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation(InventoryManagementServlet.java:453)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doService(InventoryManagementServlet.java:318)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doPost(InventoryManagementServlet.java:199)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
ERROR: The Propagation operation ended in error.
java.lang.reflect.UndeclaredThrowableException
at weblogic.security.providers.xacml.authorization.XACMLAuthorizerMBeanImpl.policyExists(XACMLAuthorizerMBeanImpl.java:245)
at sun.reflect.GeneratedMethodAccessor477.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.bea.p13n.security.internal.SecurityProviderProxy.invoke(SecurityProviderProxy.java:48)
at $Proxy54.policyExists(Unknown Source)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:241)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate$3.run(SecurityPolicyDelegate.java:239)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.kernelRunAs(SecurityPolicyDelegate.java:433)
at com.bea.p13n.entitlements.management.internal.SecurityPolicyDelegate.policyExists(SecurityPolicyDelegate.java:246)
at com.bea.p13n.entitlements.management.internal.RDBMSSecurityPolicyManager.getSecurityPolicy(RDBMSSecurityPolicyManager.java:204)
at com.bea.p13n.entitlements.management.SecurityPolicyManager.getSecurityPolicy(SecurityPolicyManager.java:119)
at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicy(SecurityHelper.java:146)
at com.bea.propagation.content.online.util.SecurityHelper.getSecurityPolicies(SecurityHelper.java:122)
at com.bea.propagation.content.online.hierarchy.ContentNodeHierarchy.discoverChildren(ContentNodeHierarchy.java:113)
at com.bea.propagation.framework.hierarchy.ListNodeHierarchy.getChildrenNodes(ListNodeHierarchy.java:113)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:215)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst_Recur(InventoryTreeWalker.java:224)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:158)
at com.bea.propagation.framework.InventoryTreeWalker.walkDepthFirst(InventoryTreeWalker.java:102)
at com.bea.propagation.framework.tool.io.InventoryTreeExport.walkDepthFirst(InventoryTreeExport.java:88)
at com.bea.propagation.framework.tool.io.InventoryFolderExport.walkDepthFirst(InventoryFolderExport.java:110)
at com.bea.propagation.framework.tool.io.InventoryArchiveExport.walkDepthFirst(InventoryArchiveExport.java:103)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:1017)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.writeInventoryToLocalFile(InventoryManagementServlet.java:991)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation_Remote(InventoryManagementServlet.java:510)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.downloadOperation(InventoryManagementServlet.java:453)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doService(InventoryManagementServlet.java:318)
at com.bea.propagation.framework.tool.servlet.InventoryManagementServlet.doPost(InventoryManagementServlet.java:199)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)your error seems to indicate that your embeddedLdap isnt in sync with the Database ? Did you either delete files from your file systems or cleanup the portal db or finally used a copy of some existing database for your domain?
-
'import (8) ended with errors' i got this error
Hi experts,
while transporting request no from devlopment to production the following error is displayed in SE09 TCODE.
IMPORT (8) ENDED WITH ERRORS. More details of this error message is
transport request : glpk901850
system :glp
tp path : tp
version and release :372.04.29 700
main import
ended with return code => 8.
how to solve this error.
pls help me in thisduplicate post locked.
Thomas -
Transport control program tp ended with error code 0208
Hello
I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
System NSP Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service Transport Service
User TMSADM Start Online
Date 12.10.2006 Function TMS_TP_SHOW_BUFFER
Time 07:13:13 Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing
unknown,.
Any Idea? Thanks for your help.
Regards, GeorgeHi
You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
Hope that helps. -
Transport control program tp ended with error code 0211
Dear Experts,
I have a problem in doing the import after the client export was successfully done.
I am actaully tring to do a client import/export from the PRD server to DEV server.
On PRD the client is 900 and on the DEV the client is 240.
I have manually copied the transport requests created into the
/usr/sap/trans/cofiles and /usr/sap/trans/data folders to the same on the DEV server.
After coping them,
I have tried to add these transport requests to the DEV server queue, i get the following error message
Transport control program tp ended with error code 0211
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: ADDTOBUFFER RT2KT00014 RT1 pf=/usr/sap/trans/bin/T
Return code: 0211
Error text: no info about transport request found
Request: RT2KT00014
System Response
The function terminates.
Procedure
Correct the error and execute the command again if necessary.
After this I have tried to add the transports to the buffer at the OS level using the command
./tp pf=TPPARAM addtobuffer "RT2KT00014" RT1 U18 by going to the folder
/usr/sap/trans/bin
But it says that the tp is not found.
I have also checked the permissions for the TRANS folder, it has full access i.e 777
This is where i am struck, and the client has to be imported asap as the requirement for the SUPPORT TEAM is very urgent.
We are on AIX, Oracle 10G and ECC6
Thanks and regards
HarryDear Imtiaz,
Thanks for your quick fire reply...
The link helped me but it could not resolve my issue..
Infact i found it my self that the transport requests had to be given full FILE PERMISSIONS at the OS level
I logged in as ROOT
and changed directory to /usr/sap/trans/cofile and gave the command
chmod 777 RT00014.RT2 and
chmod 777 RX00014.RT2
and then went to STMS>SYSTEMS>Import View>Extras>Other requests--> Add ..
Here i added the request nos and then it added up in the queue and then i started the import.
Anyway thank you very for your reply..
Awareded points to you.
Thanks and regards
Harry... -
Transport control program tp ended with error code 0247
Hi,
Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
Can someone advise where the problem is.
Cheers,
KCHi
When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
Do consult Basis team on this issue.
Thanks,
Murali. -
STMS: Transport control program tp ended with error code 0232
Dear ERP Gurus,
I just encountered problem with STMS in my PRD system. The import is just stuck up on "tp connecting to database". It won't continue unitl the system gives me this error message:
Transport control program tp ended with error code 0232
Errors: connect failed
The tp System log says:
ERROR: Connect to PRD failed (20090227135454, probably wrong environment)
I have verified that the suggestion in SAP Note 165708 has already been implemented in our DEV, QAS, and PRD instances.
Any idea why I am having this problem? Imports were running fine yesterday. Please help.
Your prompt response is highly appreciated.
Thanks a lot.
Best Regards,
AlbertHi Albert,
First check import monitor and delete all requests from queue, which are still getting imported.
And go to /usr/sap/trans/tmp and mv all those tmp files to other location.
Then kill all OS jobs which are getting execute with tp.
Check all jobs are runnig fine, related to transportation. If not reschedule the same.
Then start importing.
Before doing this just check whether your stms related RFCs are working fine.
I think One of your RFC is getting struck. just try to change ip or hostname accordingly and try.
Regards
Nick Loy -
Transport control program tp ended with error code 0232
Dear all
I've change password for user SAPSR3 by mistake
the result from brtools is "password changed successfully in table OPS$CAPADM.SAPUSER for user SAPSR3"
after that i can not transport to my production client
with error : TP_REPORTED_ERROR
Transport control program tp ended with error code 0232
Can anybody help me please
thanks & rgds,
DellaI've changed my SAPSR3 password to sap but still error
this is the error log from Check Transport Tool
DB Connect Link to database failed
This is tp version 372.04.70 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to CAP failed (20091217174435, probably wrong environmen
TRACE-INFO: 1: [dev trc ,00000] Thu Dec 17 17:44:35 2009
0.007435
TRACE-INFO: 2: [dev trc ,00000] DlLoadLib() success: dlopen("/usr
0.007448
TRACE-INFO: 3: [dev trc ,00000] Got
LIBPATH=/usr/sap/CAP/DVEBMGS32/exe:/usr/sap/CAP/DVEBMGS32/exe:/usr/lib
lient from environment
TRACE-INFO: 4:
0.008053
TRACE-INFO: 5: [dev trc ,00000] Oracle Client Version: '10.2.0.2.
0.008140
TRACE-INFO: 6: [dev trc ,00000] >oci_initialize(con_hdl=0, char
0.008158
TRACE-INFO: 7: [dev trc ,00000] application info callback registe
0.008173
TRACE-INFO: 8: [dev trc ,00000] OCIEnvCreate(mode=16384=OCI_UTF16
0.010330
TRACE-INFO: 9: [dev trc ,00000] Client character set UTF16 -> UTF
0.010421
TRACE-INFO: 10: [dev trc ,00000] Client NLS setting (OCINlsGetInf -
Transport Controll Program tp ended with error code 0012
we have 3 instances 1 DEV 2 TEST 3 PROD.
in TCODE:STMS by clicking 'system overview' icon
all systems are showing and domain controller is PROD,
and <u>Test System also defined as Transport Domain Cotroller.</u>
earlier STMS scenario: Transport Route is from DEV to PROD system not to the TEST system.
what I have done:
deleted the Transpor Domain Controller of the TEST system and kept as test system.
create routes from DEV to TEST to PROD.
present STMS problem:
when I am sending Request from the DEV to TEST Request going smootly. but at TEST sytem while importing the Request it is giving the ERROR as "<b>Transport control program tp ended with error code 0012</b>"
please help out me....as soon as possible.This is definitely the wrong forum for your post. Please repost properly.
Regards, Klaus -
Transport control program tp ended with error code 0008
Hi !
I trying to realize an export of client like that :
Source Client 400
Target System: ASI
Copy Type Client Export
Profile SAP_RECO
Status Ended with Errors
User ST01051
Start on 17.06.2009 / 17:41:00
Last Entry on 18.06.2009 / 00:20:40
Transport Requests
- Client-Specific ASIKT00028
- Texts ASIKX00028
The export ended with this error :
Transport control program tp ended with error code 0008
Error when exporting request ASIKT00028 00:20:39
Program ended with error or warning, return code: F
What happen ?
If somebody can help me to solve this problem ?
Regards,
Johanhai johan ,
of the return code is 008 then it is error,
what have u transported to target just chekc the log an du might find the error ,
just click the expand button of the error and u will get the detials what errror occured
may be some objects might be inactive just chekc once
m.a -
Transport control program tp ended with error code 0249
Hello guys,
I am facing an when importing transport. After I click import to the transport in STMS, before it runs, a message window is displayed immediately. This was working find until last week, any kind of transport is followed by the same error.
Transport control program tp ended with error code 0249
Message no. XT200
Diagnosis
An error occurred when executing a tp command.
Command: IMPORT BWDK903312 BIW client200 U0 pf=
sapbiw1a\s
Return code: 0249
Error text: connect failed due to DbSL load lib failure
Has anyone faced this error while trying to import a transport? I have not found the same error in sdn (0249)
help will be appreciated.
thanks
DGFYour are right, but which is the Basis forum?
Business Process Expert
Database & OS Platforms ABAP Development
Enterprise SOA Portal
Emerging Technologies
SAP Solutions
Business Intelligence
Scripting Languages
SAP Business One Industries
Community Discussions
SAP NetWeaver Application Server Integration and Certification Center (ICC) -
Transport control program tp ended with error code 0016
Hello colleagues,
We are getting the following error when exporting system HRP to HRI:
Transport program TP started successfully for HRPKX00005 21:25:45
| Transport control program tp ended with error code 0016
| Error exporting request HRPKT00005 00:59:50
| Program ended with error or warning, return code: F
| Runtime (seconds) : 13.876
| End of processing: 00:59:50
Please could you kindly help us to solve the issue?
Thanks in advance.
Best regards
Edited by: Víctor Barahona Cimas on Nov 12, 2009 3:33 PMok thanks
Maybe you are looking for
-
As I said......
-
ITunes Match auto-downloads on my iPhone 4?
I just subscribed to iTunes Match. Awesome. However, when I listen to a song on my iPhone, it automatically downloads that song to my device, instead of just keeping it "in the cloud." How can I turn this off? I signed up so I wouldn't have to use th
-
Hello People, Just a very good problem, to put your brains work. The senario is Idoc to File. Now Suppose the structure of IDoc is in such a way. segment1 - fields A, B, C, D --- >> Single segment2 - fields E,F --->> This segment can come
-
Hey everyone, we need to migrate our Training data from SAP VM to SAP LSO. Does anyone have best paratices about how we whould aproach that? We have new naming conventions and new objects ids (no external IDs, but the numbers objects are given by mig
-
When I created reservations manually using mb21 case 1 : Receive Storage location and Movement type as in automatic reservations RESB is being updated and reservations appearing in CO09 case 2 : Receive storage location is different from automatic r