At first launch of a fdf file, Windows installer takes more than 30 min

I updated my Acrobat 9 software. After that, I noticed that at the first launch of a .fdf file, the Windows intaller works for about 30 min (during which time I cannot do anything) before opening the file. After that, evryting seems normal. I have Acrobat 9 on several machines (University License) and this happens for each of them. I have instructed my co-workers to rename the .fdf files as .pdf to avoid this problem, and to only try to open theur first .fdf file when they know they have at least 30 min free... Why is it so ? This problem did not occur with previous versions of Acrobat.

Just for the heck of it, I renamed a FDF file to a PDF file and tried to open it, no go. I was able to import a FDF to the original PDF. The install option is a bit of an issue and I am not sure what to say to that. It may be looking for the PDF file on the hard drive and not actually be trying to install Acrobat. I opened a FDF in the same folder as the PDF and it opened right up. Otherwise, I think the location of the PDF has to be encoded in the FDF file. The form name is typically at the end of the FDF file (OPEN in notepad or such to look at the details of the FDF). You will not that it does not start as %PDF, but %FDF.
As I mentioned, Acrobat is likely looking for the original document listed at the end of the FDF file.

Similar Messages

[Solved] File "Save As" takes more than 20s before dialogue box opens

Whenever I use File "Save As" in any non-kde application (eg firefox, medit, kino), the dialogue box opens immediately but then takes more than 20 seconds to display the contents of the initial directory, after which I can then save the file. Alternative directories can then be selected instantly without problem. Starting File Save As again, causes the same long delay, so its not a caching issue. This occurs in XFCE4, LXDE & KDE.
KDE apps, however, list the contents virtually immediately, indicating that its not a disk or filing system problem.
The XFCE4 theme (under Appearance > Style) is Foresight, and the icon theme is Nuvola. Changing these does not make any apparent difference.
This is on a SATA drive with 84 GB free running Arch 64.
Can anyone suggest how this can be rectified?
Last edited by Cotton (2010-01-01 19:19:12)

Many thanks for that - problem solved.
The file contained 323 lines pointing to a single directory with multiple subdirectories, none of which was a removable device.
Moving the file to another location, resulted in the File Save As operation functioning properly.
Not sure if I actually use gtk-bookmarks as it hadn't been modified in over 6 months.
Anyway, thanks again - its made a big difference.

Using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

using numbers 2.3 how do i split windows to view more than 1 spreadsheet at a time?

Hi seth,
Numbers vocabulary:
Spreadsheets (aka: Document)
contain one or more Sheets
on each of which may be placed one or more Tables
each of which contains one or more cells
each of which may contain either data or a formula.
Spreadsheets open in separate windows. Depending on the contents of each spreadsheet, and the scale at which you want to see it (and the size of your display), you can view more than one spreadsheet in the same manner as you can view more than one of any kind of document—open two documents in separate windows. Resize the windows to allow both to be viewed at the same time. Place and scale the individual documents to permit viewing the desired part of each
Sheets within the same document cannot be displayed simultaneously. You can make and open a copy of the document, then open and view both copies as described above, but this introduces new opportunities to edit the wrong copy. You could Copy a Table from one part of the document, open Preview and go File > New from Clipboard to create a PDF copy of that table (readable, but not editable), and view the spreadsheet and pdf documents as described above.
Tables can be rearranged, or have rows or columns (or both) hidden to permit simultaneous viewing of selected parts of both.
A Table can have Table > Freeze Header Rows and Table > Freeze Header Columns set to keep these rows/columns visible as the rest of the table is scrolled. Or can have a range of rows (or columns) hidden to allow viewing of rows (columns) adjacent to that range visible on the same screen.
Numbers does not support freezing of rows or columns other than Header rows and Header Columns.
Regards,
Barry

How can a file be accessed by more than one app?

Hi,
I am new to iOS4 and the whole iPhone, iPod technology. I am really a windows user.
How can a file be accessed by more than one app. In my case I want to transfer a midi file from my PC to my iPod Touch and be able to open it from a couple of Midi Players which I am evaluating - or does each Midi Player have to import the file seperately for its own use?
Thanks,
Sam

It seems to me that what you want is exactly a session bean will do. The EJB container is responsible to maintain a certain number instances (configurable) of your session bean and serve multiple clients at the same time. Session beans are not necessarily destroyed after serving a client. If you configure your ejb server to have a pool size of 2 to 100, then you will always have at least 2 instances (no more than 100 even there are a lot of client access) of this ejb ready to serve. The only thing not clear to me is that do you want to use only ONE instance of this bean or you don't care as long as multiple clients can access this bean's service? Since you mentioned that there is not a real database access, you can certainly use a Singleton but a 'regular' session bean with static fields should do it also if these fields will not be modified by clients.
PC

HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why?

I used scripting brigde to add a movie that has size bigger than 5GB, exactly after two minutes iTunes return a failed, but the processing of the file is actually added to iTunes Library successfully. The copying take more than 5 minutes to complete. Why the iTunes Scripting Brigde returned failed when it is actually success? It occurred exactly 2 minutes after submit the request to Scripting Brigde. Is this 2 minutes related to the Apple Event time out? if it does, how do I get around this problem? thx

I can tell you that this is some of the absolutely worst customer service I have ever dealt with. I found out from a store employee that when they are really busy with calls, they have third party companies taking overflow calls. One of those companies is Xerox. What can a Xerox call center rep possibly be able to authorize on a Verizon account? I'm Sure there is a ton of misinformation out there due to this. They don't note the accounts properly or so everyone can see them. I have been transferred before and have asked if they work for Verizon or a third party also and was refused an answer so, apparently they aren't required to disclose that information. I spent a long time in the store on my last visit and it's not just customers that get the runaround. It happens to the store employees as well and it's beyond frustrating.

Why does the first Firefox browser takes more than ten seconds to open?

Once my laptop is logged into, Firefox's initial browser takes more than 10 seconds to open. The subsequent windows take less than two seconds. Much more complex programmes like photoshop open in next to no time. Is Firefox a 'heavy' programme to start?
== This happened ==
Every time Firefox opened
== I shifted to Firefox Windows IE two weeks ago. Eversince.

See http://autonome.wordpress.com/2010/ for progress of work being done to improve that.40

I have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?

i have installed windows 7 into mac 10.6 after complete it restart and from than its display is blank and nthing can happen it takes more than 3 hr so now what should i do?

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Opening PDF-files in Outlook 2007 takes more than 30 seconds.

Some of our users get multiple PDF-files as attachments in their Outlook 2007 mailbox. (In Citrix)
They have to read and print multiple PDF-files per day,
It takes them at least 30 seconds before the attachement opens, then another 30 seconds before the printoptions appears, and then another 30 seconds to give the actual printorder.
If yoy have to process 50-100 of those per day it is very annoying.
Does anywhone have a solution for this?
We work with Acrobat 10 and 11

Just for the heck of it, I renamed a FDF file to a PDF file and tried to open it, no go. I was able to import a FDF to the original PDF. The install option is a bit of an issue and I am not sure what to say to that. It may be looking for the PDF file on the hard drive and not actually be trying to install Acrobat. I opened a FDF in the same folder as the PDF and it opened right up. Otherwise, I think the location of the PDF has to be encoded in the FDF file. The form name is typically at the end of the FDF file (OPEN in notepad or such to look at the details of the FDF). You will not that it does not start as %PDF, but %FDF.
As I mentioned, Acrobat is likely looking for the original document listed at the end of the FDF file.

Windows 10 spells more than OS

There's a wee story coming...
I have been a Microsoft Partner and an IT Pro working on computer issues for people for quite a while (will come back to this). Have, also, attended many MS seminars and conferences. We often voiced concerns & complaints regarding that Tech
Support experience, if & when it was needed whilst on-site. Hold that thought...
This is the 4th OS I have beta tested for Microsoft. Beta means unsupported. Hold that thought.
There is an effort to convey the idea that the Windows 10 Platform is more, means more, than
just an OS. Many reckon that relates to technologies, One Core-Many Devices & all that. There, also, has been an effort to say that , ALSO, part of the equation is a "Changing Microsoft". Some examples: '1-Touch upgrades
of beta Builds, free in-place upgrade to GA, updates to the Platform into the future not, new OSs and a different complexion to Support & Customer Relations.
I read all the negative, borderline nasty comments in Tech Forums towards & about MS. And many who don't (or won't) see change in Microsoft...
Now, the wee story:
Even as a MS Partner getting Tech Support, in the past, has often been challenging, frustrating and depending on this or that, may have a fee. I wanted to talk w/ MS Tech Support regarding some queries from people in IT Forums and some questions &
issues of my own. I discussed this w/ a MS colleague @ a recent Cloud seminar. For some reasons we anticipated there might be a fee for the call. He kindly gave me a voucher to cover that possibility.
Anyone who thinks MS has not had a revelation and that a change of behavior & attitude into the future has not, ALSO, come along w/ the Windows 10 Platform is in denial...
I rang the number...
1. Hold times no longer insanity!
2. No jungle of options to wade through (phone buttons to push)
3. People answering w/ whom language is not a problem
4. Phone connections that are not terrible.
5. Did not need to use the voucher because it was a "No Charge" call, anyway.
What? Since when? Not what we expected.
6. Spoke w/ a Windows 10 Support Tech w/ "The Windows 10 Department".
What? Since when? On an 'UNSupported'
BETA OS? Where did I call??? Is this MS Tech Support?? Am I, still, on Earth? Did you just say Windows 10 Help Desk for an
unreleased OS?
7. He's going to take a couple of concerns higher up & PHONE me back about them. This is previously unheard of and it was HIS offer!
Have been trying to express for about 6+ months there is more worthwhile change coming to the future from Microsoft than just an OS. The positive differences from the past that accompany the Windows 10 Platform are huge. It all may touch
different Users in different ways, to differing degrees, some soon, some later. The perks & benefits will be noticed and appreciated, all in good & due time, maybe overdue time but, better now than never.
Cheers,
Drew
Drew MS Partner / MS Beta Tester / Pres. Computer Issues Pres. Computer Issues www.drewsci.com

"Have been trying to express for about 6+ months there is more worthwhile change coming to the future from Microsoft than just an OS. "
Everything of course will be fixed in the next version, it has always been that way. My first beta was win95, been an OEM system builder an Intel IPD since then, and l believe that you are being profoundly naïve.

Netbeans creating wsdl file having message with more than one part...

Hi,
I am using netbeans 6.0.1. I made an xml schema, then I wanted to make an wsdl that uses that schema.
I wanted to put in a message more parts(3), and it would not let me. Then, i made the message with just one part, and added the other parts afterwards.
But now, when I try to make a web service from that wsdl, it says that there is no service in the specified wsdl file.
And if i let that message with just one part, it will make the Web Service.
here is the xml schema and the wsdl file:
XML Schema:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
targetNamespace="http://xml.netbeans.org/schema/Abruf38"
xmlns:tns="http://xml.netbeans.org/schema/Abruf38"
elementFormDefault="qualified">
<xsd:complexType name="FormRequest">
<xsd:sequence>
<xsd:element name="newRequest" type="xsd:boolean"/>
<xsd:element name="requestNumber" type="xsd:int"/>
<xsd:element name="vehicleClass" type="xsd:string"/>
<xsd:element name="vehiclesNumber" type="xsd:int"/>
<xsd:element name="prefferedType" type="xsd:string"/>
<xsd:element name="kombi" type="xsd:boolean"/>
<xsd:element name="usageMission" type="xsd:boolean"/>
<xsd:element name="usageEducation" type="xsd:boolean"/>
<xsd:element name="usageGeneral" type="xsd:boolean"/>
<xsd:element name="usageOthers" type="xsd:string"/>
<xsd:element name="eqVehicle" type="xsd:boolean"/>
<xsd:element name="eqDangerous" type="xsd:boolean"/>
<xsd:element name="eqPlaneSpriegel" type="xsd:boolean"/>
<xsd:element name="eqBegrstll" type="xsd:boolean"/>
<xsd:element name="eqMSitzBTruck" type="xsd:boolean"/>
<xsd:element name="eqVerzurrAusst" type="xsd:boolean"/>
<xsd:element name="eqOthers" type="xsd:string"/>
<xsd:element name="bringService" type="xsd:boolean"/>
<xsd:element name="holService" type="xsd:boolean"/>
<xsd:element name="chauffService" type="xsd:boolean"/>
<xsd:element name="otherService1" type="xsd:string"/>
<xsd:element name="otherService1Chk" type="xsd:boolean"/>
<xsd:element name="otherService2" type="xsd:string"/>
<xsd:element name="otherService2Chk" type="xsd:boolean"/>
<xsd:element name="otherService3" type="xsd:string"/>
<xsd:element name="otherService3Chk" type="xsd:boolean"/>
<xsd:element name="activity" type="xsd:string"/>
<xsd:element name="costPayer" type="xsd:string"/>
<xsd:element name="costCenter" type="xsd:string"/>
<xsd:element name="vehicleCost" type="xsd:float"/>
<xsd:element name="chauffServiceCost" type="xsd:float"/>
<xsd:element name="holBringServiceCost" type="xsd:float"/>
<xsd:element name="totalCost" type="xsd:float"/>
<xsd:element name="tripPurpose" type="xsd:string"/>
<xsd:element name="fixTermin" type="xsd:boolean"/>
<xsd:element name="justificationFix" type="xsd:string"/>
<xsd:element name="requestID" type="xsd:string"/>
<xsd:element name="rentalPeriod" type="tns:RentalPeriod"/>
<xsd:element name="carPool" type="tns:CarPool"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="CarPool">
<xsd:sequence>
<xsd:element name="poolID" type="xsd:string"/>
<xsd:element name="poolName" type="xsd:string"/>
<xsd:element name="orgNumber" type="xsd:string"/>
<xsd:element name="vehicle" maxOccurs="unbounded" type="tns:Vehicle"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="RentalPeriod">
<xsd:sequence>
<xsd:element name="rentalPeriodID" type="xsd:string"/>
<xsd:element name="startDate" type="xsd:date"/>
<xsd:element name="endDate" type="xsd:date"/>
<xsd:element name="startTime" type="xsd:time"/>
<xsd:element name="endTime" type="xsd:time"/>
<xsd:element name="startLocation" type="xsd:string"/>
<xsd:element name="endLocation" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Vehicle">
<xsd:sequence>
<xsd:element name="vehicleID" type="xsd:string"/>
<xsd:element name="vehicleClass" type="xsd:string"/>
<xsd:element name="vehicleRegisterNo" type="xsd:int"/>
<xsd:element name="vehicleType" type="xsd:string"/>
<xsd:element name="seatsNumber" type="xsd:int"/>
<xsd:element name="cost" type="xsd:float"/>
<xsd:element name="available" type="xsd:boolean"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Contact">
<xsd:sequence>
<xsd:element name="contactID" type="xsd:string"/>
<xsd:element name="contactName" type="xsd:string"/>
<xsd:element name="telNumber" type="xsd:int"/>
<xsd:element name="faxNumber" type="xsd:int"/>
<xsd:element name="loNo" type="xsd:string"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Person">
<xsd:sequence>
<xsd:element name="personID"/>
<xsd:element name="department" type="xsd:string"/>
<xsd:element name="serviceNumber" type="xsd:int"/>
<xsd:element name="contact" type="tns:Contact"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="Department">
<xsd:sequence>
<xsd:element name="departmentID" type="xsd:string"/>
<xsd:element name="fundsDepartment" type="xsd:string"/>
<xsd:element name="mvwdst" type="xsd:int"/>
<xsd:element name="distributionNumber" type="xsd:int"/>
<xsd:element name="contact" type="tns:Contact"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="formRequestElement" type="tns:FormRequest"/>
<xsd:element name="personElement" type="tns:Person"/>
<xsd:element name="departmentElement" type="tns:Department"/>
<xsd:element name="vehicle" type="tns:Vehicle"/>
<xsd:element name="loadFormReturn" type="xsd:boolean"/>
<xsd:element name="editFormReturn" type="xsd:boolean"/>
</xsd:schema>
Wsdl File:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="userWS" targetNamespace="http://j2ee.netbeans.org/wsdl/userWS"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:ns="http://xml.netbeans.org/schema/Abruf38" xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype" xmlns:tns="http://j2ee.netbeans.org/wsdl/userWS" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xsd:schema targetNamespace="http://j2ee.netbeans.org/wsdl/userWS">
<xsd:import namespace="http://xml.netbeans.org/schema/Abruf38" schemaLocation="Abruf38.xsd"/>
</xsd:schema>
</types>
<message name="loadFormRequest">
<part name="formRequest" element="ns:formRequestElement"/>
<part name="person" element="ns:personElement"/>
<part name="department" element="ns:departmentElement"/>
</message>
<message name="loadFormReply">
<part name="retVal" element="ns:loadFormReturn"/>
</message>
<portType name="userWSPortType">
<operation name="loadForm">
<input name="input1" message="tns:loadFormRequest"></input>
<output name="output1" message="tns:loadFormReply"/>
</operation>
</portType>
<binding name="userWSBinding" type="tns:userWSPortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="loadForm">
<soap:operation/>
<input name="input1">
<soap:body use="literal"/>
</input>
<output name="output1">
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="userWSService">
<port name="userWSPort" binding="tns:userWSBinding">
<soap:address location="http://localhost:18181/userWSService/userWSPort"/>
</port>
</service>
<plnk:partnerLinkType name="userWS1">

<plnk:role name="userWSPortTypeRole" portType="tns:userWSPortType"/>
</plnk:partnerLinkType>
</definitions>
The message that Netbeans says when trying to put more parts to the message is:
WS-I Basic Profile Rule R2210: If a document-literal binding in a DESCRIPTION does not specify the parts attribute on a soapbind:body element, the corresponding abstract wsdl:message MUST define zero or one wsdl:parts.
Please...I am desperate, cause I am pressed by time!
Can anyone tell me how can I make it work. Cause it is very common to use a Web service operation that has more than ONE parameter.
I am waiting for your replys!

Hi,
Change the <soap:binding style="document"... to <soap:binding style="rpc"... and see if that works.
I'm not sure how to get <soap:binding style="document"... working yet - I'm not that experienced in web services yet.
Hope this helps and is not too late.
Regards,
Greg Nye

Unable to minimize windows or view more than one window

I had a MacBook Pro prior to the MacBook 2015. I never had a problem minimizing windows. I really need to have more than one window open at same time, but I can't seem to do this with MacBook. There usually is a white dot in middle where it was yellow in MacBook Pro to minimize the window. There is an icon with double page symbol I can click in the right corner, but when it shows a thumbnail image of each website on one page instead of minimizing the window when I click on it. Is there something I can click on to minimize the window so more than one window appears at the same time? I do not even see line/arrow appear in corners of window to drag the window to a smaller size.

I do not even see line/arrow appear in corners of window to drag the window to a smaller size.
Just put your cursor on any edge or corner of a window until you see the double arrows then click and hold while you drag to resize. This is no different than it's been for the last 4 years since the introduction of Lion.
There usually is a white dot in middle where it was yellow in MacBook Pro to minimize the window.
The yellow dot will minimize the window to the Dock.
http://www.peachpit.com/articles/article.aspx?p=412362&seqNum=6
In Yosemite, a click on the the Green dot goes to full screen, an Option click is like the prior green dot's performance.

Upload Excel file to itab with more than 255 chars

I want to upload an excel file to internal table with more than 255 characters in one of the field. However it restricts the upload to only 255 characters. Currently I am using the code
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_field_seperator = 'X'
i_line_header = 'X'
     i_tab_raw_data = wa_tab_raw_data
     i_filename = p_file
TABLES
     i_tab_converted_data = <fs_table>
EXCEPTIONS
     conversion_failed = 1
     OTHERS = 2.
where <Fs_table> is a dynamic structure in which one column is defined as string. We cannot use FM ALSM_EXCEL_TO_INTERNAL_TABLE as it has a restriction of only 50 characters and I dont want to create a Zstruture in the system.

It wont work for excel file type.However, with FM Gui_Upload and use a text tab-delimited file we can upload long text.
Here is the code.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = p_files
      filetype                = 'ASC'
      has_field_separator     = 'X'
    TABLES
      data_tab                = <fs_table>
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.

In one sessions.xml file can i include more than one project

Hi Folks,
I got a requirement to create more projects by using the same sessions.xml file if it is possible please let me know.
thanks
Venkatram R. Veerareddy

Hi Venkatram,
It is possible to have more than one session in sessions.xml. Have the sessions.xml like this
<toplink-configuration>
<session>
<name>Session1</name>
</session>
<session>
<name>Session2</name>
</session>
</toplink-configuration>
Use session broker for handling both the sessions simultaneously. For more details see examples in toplink under directory broker.

Download to Ex-Cel file which contains data more than 65533 approximately

I want to download the SAP report which contains more than 180000 data appr. into excel file but ex-cel can accomodate only 65533 in one worksheet ( i.e., tab). Kindly tell me how to download the output into ex-cel file.
Thanks in advance
Renuka

You can't handle more than 65000 line in Excel.
One way, is to donwload the file in a "csv" format and then open it with access...
Hope this helps,
Erwan.

At first launch of a fdf file, Windows installer takes more than 30 min

Similar Messages

Maybe you are looking for