At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required
At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required
Also the passwords are long and cumbersome to type every time on the apple TV remote, what is the alternative if I cannot store them on the memory of the Apple TV
Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.
Similar Messages
-
i shared an ipod 5th gen with my ex partner and she set it up with her email and password. i have the ipod now but no password and would like to put it on my email and password so that i can wipe it clean and start again, any ideas?
The iPod isn't tied to an Apple ID, but is likely tied to an iTunes library. If you want to set it up as a new iPod (as if you were just pulling it out of the box), restore it to factory settings in iTunes.
Restoring iPod to factory settings
B-rock -
I have a few devices on one apple id and would like to switch out one of my phones so they have there own apple id do I have to restore the phone as new or can i somehow switch it without losing all apps and music in iTunes?
Hello lynnettefromsk,
The article linked below details all of the locations that you may need to change your Apple ID. This process should not affect the state of anything on the device at the time.
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Cheers,
Allen -
I have an iMac(mid2010) running Pages v5.5.1 on OS X 10.10. Why can I not save or share documents. The error message is You can’t save the file “TEST.pages” because the volume is read only.
I get the same message when using Numbers so I presume it is a OS problemSome of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Back up all data before proceeding.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button
Select
▹ Restart
from the menu bar. -
I have purchased the VGA Connectors for both a iMac and Macbook Pro so that i can connect my promethean board projector to the computer and I can not get the image on the screen. Does anyone have any suggestions?
Irelandbound wrote:
thank you, I have the adaptors so glad that would work. I just heard adaptors burn out often. So Just thought for my main iMac computer, a plug would be best. I will get one once I move.
Any other suggestions or things I should know about apple products in Ireland. I know there are no Apple stores there.
An adaptor doesn't burn out. It merely serves as a means to connect the power prongs on your device to the power supply.
I believe you are thinking of a transformer, which you do not need. A transformer converts one voltage to another.
You don't need to do that as the power supply of modern electronics can take almost any worldwide voltage.
Look at the label on the device. It should indicate the input power acceptable of 100-240 VAC, 50-60 Hz.
Additionally, I found the adapters cheaper in the UK than I found them in the US. They were available in most supermarket chains. I wasn't in Ireland, so I can't say one way or the other.
If you have something that doesn't have that input power spec, it would require a transformer.
On other items like electric clocks or things with motors, you can connect them up to a transformer and the voltage will be correct, but the frequency may not. For clocks, that will cause them to not keep time well. For motors, they will burn out. -
My iPad is frozen. Does not turn off or charge just black screen with logo. Tried to reset by pressing the two buttons and nothing.
Then you should try restoring the iOS software next. Read this and pay attention to the last part of the article that describes recovery mode, you may have to restore your iPad that way.
iTunes: Restoring iOS software - Support - Apple -
i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???
capriz wrote:
i have just updated my old 3GS ...
To what... iOS 7 is Not supported on the 3 GS -
I own an iPod Touch 4g. Now i'm planning to buy iPod Touch 5g. Is it possible for me to register the new iPod with existing Apple ID so that i can transfer the apps from my existing account to my new Ipod 5g?
There should definitely be no issue. You can register more than one Apple device with the same Apple ID and get the same apps on both devices without having to pay for the apps again.
Alternatively, if you want all your settings to say the same, do a backup of your old iPod Touch and then whe you receive the new iPod, restore the backup on it and it'll save you the trouble from having to redownload everything.
Cheers. -
What is the name of the small part that comes lose when you are removing the two battery screws on the left side of the battery, the small part is under the top screw when removing the iPhone 4s battery?
It's the part that means you've voided your warranty and the right to get an out-of-warranty replacement from Apple.
-
My wife got a Iphone in Bangladesh. she do not know the password for apple ID, there is no way to collect it, as the email id for that iphone is not her. how she can use application store and itunes? please help me
If it is second hand, try putting it in recovery mode, and restoring it with itunes on a mac or pc.
Recovery mode tutoral:http://www.youtube.com/watch?v=dkVr5CxFiFM -
I have an apple tv, apple keyboard and klipsch bluetooth speakers. I have been trying to pair them on apple tv so that I can watch netflix
thru my speakers. I have tried everything but it wont seem to work. Any suggestions would be helpful.
<Email Edited by Host>The ATV only supports bluetooth for keyboards.
Posting your email in a public, world-wide forum is not smart. -
I just want to know how to save some of the music manuscript i have created under songwriting, in to a format that I can email to a non-apple PC so that they can print it for me. How would I do that?
Thank you,
Peter Michaels.And you just like helping people?
That is just the way this forum works - users get help from other users and learn from others and like to contribute if they see they can help.
My latest challenge was typing in melodies and chords of songs I'd written on the piano. But using the Musical Typing in register C3 I inserted all the notes by playing on the imac keyboard (and written in the treble clef). The only problem is you cant insert the chords at the same time. Now I have an empty bass clef, which requires chords be inserted in register C2 and I dont know yet how to do that.
To fill in the chords: Join a melody track and a bass track, like this:
- Create a new software track and record the chords separately with musical typing.
- Create a new track and copy your melody loops there (just as backup, if something goes wrong)
- Do the same with the track containing the chords.
- Then select all loops in the copies of the melody track and the copy of the chords track and select from the main menu
Edit -> Join.
Now you should have a track that contains the bass as well as the melody and both staffs should be filled in the track editor, so you can print both at the same time.
However, there will be some notes assigned to the wrong staff - very low melody notes will appear in the bass cleff, very high chord notes will appear in the melody cleff - and I don't see how you could fix that in GB.
Good luck
Léonie -
My whole family share and Apple ID so that we can share games, apps, calendars, etc.. Is there a better way to do this, and can we each have our own cloud for each device while sharing an Apple ID?
No. There is no way to transfer purchases between IDs
Allan -
I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?
cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID? -
On iOS 5 for iPad, is there a home button key on the Apple Bluetooth Keyboard that will allow you to go to the home screen or multitask? Perhaps by pressing the escape key or something?
Sorry, but no one who would know can discuss unreleased software such as iOS 5 in these forums. We'll have to wait, probably for the official release, before such details will be known.
Regards.
Maybe you are looking for
-
I downloaded music and the song cuts off in the middle.
-
LocalSessionFactoryBean - Could not instantiate bean class
Hello, I am facing a problem with the instantiation of the LocaSessionFactoryBean in a sample Spring 3.0.4 - Hibernate 3.2.6, WebLogic 10.3.3 and Oracle 10g. I am run an web application using JDeveloper 11.1.1.3.0 with the integrated WebLogic Server
-
Support Pack level for upgrade
Hi All, We are upgrading from R/3 4.7 to ECC 6.0, can anybody provide me Support Pack level for SAP_ABA, SAP_BASIS etc. before starting upgrade. I have gone through lot of OSS notes but not getting exact SP level. Regards, Sachin
-
Hi, Im working with asp application having controls (1 dropdownlist(options--Schedlue,InProcess,On HOld),two textboxes(SSStatusComments,SSGeneralComments)) I want to show output something like below CREATE TABLE [dbo].[EFIWorkStatus1]( [WID] [int]
-
I purchased two songs last night. They both appear on my purchased music file. When I tried to play them today I got a message saying that my computer was not authorised to play the songs. When I click to authorise them it says that it was successful