At least 005 errors found when certificates checked

Hi All,
I am getting the following Error in sm21 from past few days,
But if i go and check in STRUST local PSE is ok and certificate validity is till 2038.
What could be the Reason and how to go above it. As i am getting the same error in my BI and SRM landscape.
Thanks & Regards,
Balaji.S

Hi,
Thanks for the reply,
I have checked the note and according to that i checked the report SSF_ALERT_CERTEXPIRE.
This is the result i got:
SNC SAPCryptolib                                        PROG <SNCS>
    Error during SSF Get: could not open PSE
    Use the Trust Manager (transaction STRUST) for error analysis
SSL Client (Anonymous)                                  SSLC ANONYM
    Error during SSF Get: could not open PSE
    Use the Trust Manager (transaction STRUST) for error analysis
SSL Client (Standard)                                   SSLC DFAULT
    Error during SSF Get: could not open PSE
    Use the Trust Manager (transaction STRUST) for error analysis
WSSE Web Service Security Test                          SSLC WSSE
    Error during SSF Get: could not open PSE
    Use the Trust Manager (transaction STRUST) for error analysis
SSL Server                                              PROG <SSLS>
sthbmpsrcs_BMP_02
Error during SSF Get: could not open PSE
Use the Trust Manager (transaction STRUST) for error analysis
sths6kap05_BMP_00
Error during SSF Get: could not open PSE
Use the Trust Manager (transaction STRUST) for error analysis
And When i checked in STRUST tcode.
My local PSE is ok but i can see following component in red.
SNC SAPcryptolib, SNC server standard, SSL Client SSL client, SSL client WSSE and so on..
( Actually i checked with the Abap team they have activated the HTTS related thing)
Is is because of that?
Thanks & Regards,
Balaji.S

Similar Messages

CMDTUX_CAT:866:ERROR:tmloadcf:severe error found stop sysntax checking

Hi All,
I installed tuxedo8.1 on my pc and i am using win2k as my os.
but when I do a tmloadcf ubbsimple , i get erro like this,
CMDTUX_CAT:866:Error:tmloadcf severe error found stop sysntax checking.
Here is my ubbconfig
# <c) 2003 BEA Systems, Inc. All Rights Reserved.
#ident     "@(#) samples/atmi/simpapp/ubbsimple     $Revision: 1.5 $"
#Skeleton UBBCONFIG file for the TUXEDO Simple Application.
#Replace the <bracketed> items with the appropriate values.
*RESOURCES
IPCKEY 123093
#Example:
#IPCKEY          123456
DOMAINID simpapp
MASTER simple
MAXACCESSERS 10
MAXSERVERS 5
MAXSERVICES 10
MODEL SHM
LDBAL N
*MACHINES
DEFAULT
APPDIR="D:\simpapp"
TUXCONFIG="D:\simpapp\tuxconfig"
TUXDIR="C:\bea\tuxedo8.1"
#Example:
#          APPDIR="/home/me/simpapp"
#          TUXCONFIG="/home/me/simpapp/tuxconfig"
#          TUXDIR="/usr/tuxedo"
pratima-5jknwxk LMID=simple
#Example:
#beatuxLMID=simple
*GROUPS
GROUP1 LMID=simple GRPNO=1
OPENINFO=NONE
*SERVERS
DEFAULT:CLOPT="-A"
simpserv SRVGRP=GROUP1 SRVID=1
*SERVICES
TOUPPER
Can anyone help me?
Thanks in Advance,
Fattan

I think the UBB gets problem. Details of the error code 866
ERROR: command: Severe error found. Stop syntax checking.
Description
While executing tmloadcf, an error occurred in the input UBBCONFIG file such that the TUXCONFIG file cannot be loaded. These errors include missing sections, multiple occurrences of sections, dynamic space allocation errors, etc, such that parsing of the input UBBCONFIG file was terminated before reading the entire file.
Action
Earlier warning or error messages will indicate the nature of the error. Correct these problems and re-execute the command.
fyi. http://mytuxedo.blogspot.com/
Message was edited by harrylee at Sep 13, 2004 2:11 AM

When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green.

When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green. What is the fix?

Hi spillgar,
If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Regards,
- Brenden

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

HT1338 I have a Mac OS X 10.5.8 running verrry slowly. The HD still has 113.3 GB free. Could I need a Safari update or Flash update? No updates found when I check. ??Thanks.

I have a Mac OS X 10.5.8 running verrry slowly. The HD still has 113.3 GB free. Could I need a Safari update or Flash update? No updates found when I check. ??Thanks.

Is it slow with everything you do, or just with Safari?

SSTP VPN fails with Error 0x80092013 when certificate is issued by an Enterprise CA

I have spent several days trying to configure an SSTP VPN in an environment with a 2008R2 Enterprise CA server without much luck. I have been using the example found at http://technet.microsoft.com/en-us/library/cc731352(v=ws.10).aspx which
works very well as long as you configure the CA Extensions tab with an http CRL Distribution point that is included in the CRLs and CDP extension of issued certificates and is available to the client prior to VPN connection.
Basically my lab environment is as follows:
Separate 2008R2 domain controller, Single 2008R2 Enterprise CA / RRAS server with one nic. I know the instructions that I mentioned above use an RRAS server with 2 nics but I don't want my RRAS server serving as a router. I have an external hardware firewall
that port forwards port 443 to my single nic in my RRAS server and this entire configuration works fine as long as I am using a standard CA configuration. The RRAS was configured using the custom option and only VPN was chosen. Since my RRAS server is behind
a NAT router, the dns name my external client uses to connect is different than the internal name of my RRAS server.
In the example above, a Windows 2008R2 CA server is configured as a standalone non-enterprise root CA. As long as I stick with a standard CA, I have no problem and everything works.
My problem is that if I configure my Windows Server 2008R2 Enterprise server as an Enterprise Root CA, My Windows 7 client always gets an "Error 0x80092013 The revocation function was unable to check revocation because the revocation server was offline."
I'm not certain, but I think the problem is with the way that I request the certificate for my RRAS server. When I configure a standalone standard root CA and use the web enrollment page and use an Advanced Certificate Request, I get a page that I can use
to fill out the external dns name that I use to connect to SSTP, choose a Server Authentication Certificate, choose to mark keys as exportable and submit my request. Once I install this key in the Certificates (local computer) / Personal / Certificates
store, everything works and my client can connect as long as I have installed the root CA certificate on my client.
When I install my CA as an Enterprise Root CA server, everything changes. I no longer have the same options to install a custom certificate. Instead of getting the same page as I do with a standard CA, I get my choice of Certificate Templates. Prior to this,
I have duplicated the Computer template in the CA authority and configured the subject name to "supply in request" and configured my CA to issue it. I have tried issuing my RRAS SSTP certificate using the web enrollment and I have also tried using the certificates
plugins in mmc to request custom certificates and tried using an alternative subject name, filling out the DNS option with my external dns name.
When it is all said and done, I end up with an RRAS SSTP certificate that has CRL Distribution Points defined as URL=http://www.mywebsite/CertEnroll/myCA.crl and it is available to my client or anyone. I have compared the certificate issued by an Enterprise
CA vs the Standard CA and I find little difference in the two. I also know that I can reach this RRAS SSTP certificate from my client by going to https://myexternaladdress.mydomain.com/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/and
I can view the padlock in IE and view my internal RRAS certificate. The CRL Distribution point looks no different when I have a standard vs an Enterprise CA but my client always fails with the Error 0x80092013 when I have issued the RRAS SSTP certificate
with the Enterprise CA.
I have probably re-setup this lab about 20 times and am getting very familiar with getting it set up quickly and working with the standard CA but I want to use an Enterprise CA environment.
What am I missing? How can I make this work with an Enterprise CA? How can I troubleshoot this?
Thanks,
Rod
Rod Miller

Thanks for your reply. I did read the article and addressed that issue in the first part of my previous post. I don't think that the website where I am hosting my CRL has directory browsing permissions or that I have the ability to set them but the
point of my question was everything works using that same public website when I use a standard CA to create my certificate but does NOT work when I create the certificate using an Enterprise CA.
Rod
Rod Miller

Errors found when running the example of "Five XSLT 2.0 Features ..."

Does anyone encounter the error "XSL-1015: (Error) Function 'current-group' not found" when running Oraxsl grouping_20.xsl?
Despite I followed exactly what memtioned in the article, it still did not work.
Thank you very much.

Before running the samples, I downloaded the Oracle XDK 10G via http://otn.oracle.com/tech/xml/xdkhome.html
just a week ago.
So, I believe I got the most up-to-dated version of XMLparserv2.jar.
I spent a day or 2, trying to execute some samples in the article, but things did not work out well. Whenever a stylesheet file (*.xsl) contains "current-group()" functions, it raises the above error.

Error found when upgrading from11.5.10.2 to R12.1.1 with the DB R 11.2.0.1

Hi All,
I have following the "Upgrade Advisor: E-Business Suite (EBS) Upgrade from 11.5.10.2 to 12.1.3 [ID 269.1]", and select the option 3 Configure --> Preform Upgrade on Test System --> Upgrade Test Environment 12.1.1 --> Perform Upgrade --> Apply AD 12.1.1 upgrade driver (required) (The steps before apply AD 12.1.1 have been done, the R12 rapid install have been done.)
According to their instructions, I need to merge 3 patches 9477107, 9179588, 7461070, and applied it to R12.1.1, it was successfully. (I have attached the adpatch file to metalink, they also confirmed that the patches have been applied successfully. ** Due to I have some warning messages found in the log, that's the reason I raised a SR to ask Oracle about it.)
After this step, the step 10. Run the American English upgrade patch driver (required) to be executed, but error found.
Accroding to this step, I need to apply 7303029:12.1.0 with preinstall mode and merge its with the American English drive which located in $AU_TOP/patch/115/driver/u6678700.drv.
As the patch readme file instructions, "adpatch options=nocopyportion,nogenerateportion" have been executed. After a while, the autopatch process was failed due to
AutoPatch error:
Missing prerequisite codelevel for entity 'ad'.
This patch requires the following codelevel or higher: 'R12.AD.B.1'.
The current on-site codelevel for the entity 'ad' is : 'R12.AD.A'.
In order to apply this patch you must first apply a patch that introduces
at least the minimum required codelevel.
You may merge this patch with a patch that introduces the required codelevel.
I was so wondering about it, how's come the ad codelevel doesn't match, the patch 7461070 should be the level 'R12.AD.B.1' (can be found in the patch's readme file.), how's come the current on-site code level is 'R12.AD.A'?
I was stuck in this point, can't process further.
Anyone was facing this issue too? If so, could you please let me know how to solve it. Or anythings I can do now? Do I need to re-apply the patch 7461070 again?
Thank you so much.
Amy

Amy,
As this an E-Business migration problem it would be better to ask the question in an E-Business forum.
Try here to begin with -
EBS General Discussion -
General EBS Discussion
and they should be able to help or direct you to the best forum to follow up.
Regards,
Mike

Error found when updating table

Dear all
i got an error message when executing the following update statement, any idea ?
Please help !!
SQL> UPDATE COMPRLMMR SET MMRLNM = MMRID;
UPDATE COMPRLMMR SET MMRLNM = MMRID;
ERROR ¦b¦æ 1:
ORA-01654: unable to extend index LIIL_SA.IDX_PRLMMR_MMRLNM by 128 in tablespace USERS
ORA-27059: skgfrsz: could not reduce file size
OSD-04005: SetFilePointer() failure, unable to read from file
O/S-Error: (OS 112) ºÏºÐªºªÅ¶¡¤£¨¬¡C

Looks like your USERS tablespace is full. You (or the DBA) will probably need to allocate additional space for the tablespace.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Error found when deleteing a leave request

Hi,
I am getting an error when I am deleting a leave request on ESS i.e.
Work item 000000000000 cannot be read
Please help me on the same.
With Regards
Gaurav Mittal

Hi,
No the thing is that I have to make it automatically for all the users, as all of them are facing the same problem. Please give a solution so that It will delete when the user want to delete his leave request from ESS automatically, not by going into R/3.
With Regards,
Gaurav

Errors found when using tar and ACL's

Having difficulties with TAR and ACLs, and wondering if anyone had seen this before.
Here's the scenario: create a few directories and a few files. Tar it up and extract the files. Now assign some ACL's to them (some default for directories), tar it up, and extract the files. Permissions should remain the same. Under most circumstances they are.
Now repeat the procedure, but put a default directory ACL on the parent directory where the TAR is created. What happens is that the group permissions for anything un-tared gets trashed.
Here's a script to test it out.
Create a dummy user (I called mine foobar) -- required for setting ACL's. Run the script with the "-d" option at first. Things appear good. You can compare the permissions on the bottom for each file/directory.
Run the script with the "-s" option setting default ACL's on the parent.
#!/usr/bin/sh
ROOTDIR=/export/home/christian/config
TESTDIR=/export/home/christian
USER_X="oam"
# Run the script once with normal permissions (no ACL's) in the test directory (where tar is located)
# --> ./test.sh -d
# look at the result (ls -l) of .../sub1dir, .../sub1dir_acl, and /sub1dir_orig
# They should be relatively the same:
# --> rwxrwxrwx permissions on directories
# --> rw-rw-rw- on files
# Now run the script but set the parent directory of the script (where the TAR's are located) to have default ACL's
# --> /opt/MMSsyscnf/sub2dir/test/test.sh -s
# Now look at the result (ls -l) of .../sub1dir, .../sub1dir_acl, and /sub1dir_orig
# They are COMPLETELY skewed. Both times we tried to untar the files, ACL's wound up
# all over the place and permissions were not set correctly.
# --> rwxrwxrwx permissions ONLY on original directory (not the product of an UNTAR)
# --> rwxr--rwx permissions on directories created by untar
# --> rw-rw-rw- on files ONLY on original directory (not the product of an UNTAR)
# --> rw-r--rw- on files created by untar
# ****** Why is group affected by this, but "other" is not?! It's gotta be a bug!
# MAIN
ACTION="NOPREP"
while [ -n "$1" ]
do
if [ "ABC$1" = "ABC-d" ]; then
#flag set to try and remove default directory ACL's
setfacl -d u:$USER_X $TESTDIR
setfacl -d d:u:$USER_X $TESTDIR
setfacl -d d:u::,d:g::,d:m:,d:o: $TESTDIR
elif [ "ABC$1" = "ABC-s" ]; then
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $TESTDIR
setfacl -r -m d:u:$USER_X:rw- $TESTDIR
setfacl -r -m u:$USER_X:r-x $TESTDIR
fi
shift;
done
# clean up previous run of the test
rm -r $ROOTDIR
# create files/directories
mkdir $ROOTDIR
mkdir $ROOTDIR/sub1dir
mkdir $ROOTDIR/sub1dir/sub2dir
mkdir $ROOTDIR/sub1dir/sub2dir/sub3dir
#set permissions
chmod 777 $ROOTDIR
chmod 777 $ROOTDIR/sub1dir
chmod 777 $ROOTDIR/sub1dir/sub2dir
chmod 777 $ROOTDIR/sub1dir/sub2dir/sub3dir
# create files
echo "" > $ROOTDIR/sub1dir/sub2dir/file1.txt
echo "" > $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
chmod 666 $ROOTDIR/sub1dir/sub2dir/file1.txt
chmod 666 $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
# tar/zip the files:
/usr/bin/tar -cvf $ROOTDIR/tarBeforeACLs.tar $ROOTDIR/sub1dir
/usr/bin/gzip $ROOTDIR/tarBeforeACLs.tar
# move the directory (so we keep the original as a template of what things should look like)
mv $ROOTDIR/sub1dir $ROOTDIR/sub1dir_orig
# untar/zip the files:
/usr/bin/gunzip $ROOTDIR/tarBeforeACLs.tar
/usr/bin/tar -xvf $ROOTDIR/tarBeforeACLs.tar
ls -lR $ROOTDIR
# Ok. These have been tested to be the exact same.
echo "********************************************************************************"
echo "********************************************************************************"
echo "********************************************************************************"
# Let's try using ACL's now
# --> directories (owned by root) must be acessible to OAM user.
# --> files (owned by root) must be read/writable by user OAM when created in the directories
setfacl -r -m u:$USER_X:r-x $ROOTDIR/sub1dir
setfacl -r -m u:$USER_X:r-x $ROOTDIR/sub1dir/sub2dir
setfacl -r -m u:$USER_X:r-x $ROOTDIR/sub1dir/sub2dir/sub3dir
setfacl -r -m u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir/file1.txt
setfacl -r -m u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $ROOTDIR/sub1dir
setfacl -r -m d:u:$USER_X:rw- $ROOTDIR/sub1dir
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $ROOTDIR/sub1dir/sub2dir
setfacl -r -m d:u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir
setfacl -r -m d:u::rw-,d:g::r--,d:o:---,d:m:rwx $ROOTDIR/sub1dir/sub2dir/sub3dir
setfacl -r -m d:u:$USER_X:rw- $ROOTDIR/sub1dir/sub2dir/sub3dir
# here are things as they stand
ls -lR $ROOTDIR
echo "********************************************************************************"
echo "********************************************************************************"
echo "********************************************************************************"
# tar/zip the files:
/usr/bin/tar -cvfp $ROOTDIR/tarAfterACLs.tar $ROOTDIR/sub1dir
/usr/bin/gzip $ROOTDIR/tarAfterACLs.tar
# move the directory (so we keep the directory that was applied ACL's)
mv $ROOTDIR/sub1dir $ROOTDIR/sub1dir_acl
# untar/zip the files:
/usr/bin/gunzip $ROOTDIR/tarAfterACLs.tar
/usr/bin/tar -xvfp $ROOTDIR/tarAfterACLs.tar
# here are things after we've untared them
ls -lR $ROOTDIR
echo "********************************************************************************"
echo "********************************************************************************"
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig $ROOTDIR/sub1dir_acl $ROOTDIR/sub1dir
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir $ROOTDIR/sub1dir_acl/sub2dir $ROOTDIR/sub1dir/sub2dir
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir/sub3dir $ROOTDIR/sub1dir_acl/sub2dir/sub3dir $ROOTDIR/sub1dir/sub2dir/sub3dir
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir/file1.txt $ROOTDIR/sub1dir_acl/sub2dir/file1.txt $ROOTDIR/sub1dir/sub2dir/file1.txt
echo "********************************************************************************"
getfacl $ROOTDIR/sub1dir_orig/sub2dir/sub3dir/file2.txt $ROOTDIR/sub1dir_acl/sub2dir/sub3dir/file2.txt $ROOTDIR/sub1dir/sub2dir/sub3dir/file2.txt
echo "********************************************************************************"
Any ideas?

UFSDUMP has some limitations, including being on a file system that is read-only. Yes, I could force it on a read-write FS, but I normally stay away from big sticker labels found in man pages when I encounter them. :-(
What I was originally after was a script that makes a backup of application configuration files before I modify them. Thus, I tar/zip the directory.
These config files/directores have ACL's attached to them to allow various roles to access them (group permissions are not fine-grain enough). However, when I ran through a couple of tests, I came across a scenario that overwrote the original permissions. Tested it on Solaris 10 and Solaris 9, and both fail.
So now (very late into the feature design) I'm VERY concerned about using ACL's on Solaris, and wonder what other side-effects there are that I'm not aware of. Can't seem to find a bug report on it, so I thought I'd ask around to see if it was just the behaviour of the TAR/ACL that I'm not quite getting, or if it really is a bug.
/chris

4 disc errors found when running 'verify disc"

Did verify disc.
1. incorrect number of thread records
2. invalid directory item count
3. invalid voume file count
4. invalid voume free bock count
I have no clue what any of this means. I ran OS X install disc and repaired the disc successfully. Can anyone tell me what these errors mean?? Is my hard drive in danger of failing??
Thanks

Sometimes things on the hard drive can get out of sync. Booting from an operating system DVD or original DVD that came with the system allows you to repair the disk to fix the errors. Sometimes Disk Utility can't fix the errors, and that leads you down a different path. Since you're repaired, we don't need to go there.
If you want to look at the health of your hard drive, first look at Disk Utility, and when you've chosen the hard drive, see what the SMART status says. If it says 'verified', you're OK. If it says anything but 'verified' then you're on borrowed time.
If you want to go deeper, download SMART Utility from http://www.volitans-software.com/smart_utility.php . This will show you the actual SMART indicators and give you a better view on the health of your drive. I once had a hard drive with SMART status as shown in Disk Utility = verified. Volitan's SMART Utility showed that there were read/write errors accumulating, with a yellow status (in green=good, yellow=failing, and red=dead) on the drive. It wasn't bad enough to trip the SMART indicators for Disk Utility, however, the drive itself was in the early stages of failing.

Error 502 When downloading (Check For Download)

i have an issue while downloading "Inception" Movie! Iam getting The error 502!
i can download anything else! Apps or music or music video!
im on iTunes Store UK.
Any way to solve this issue ?

I have the same problem with my iPhone 3G.
please let me know if there is a way

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

Error oracle.sql.* and oracle.jdbc.driver.* not found when using oracle as a database

I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama

Hi Anupama,
First of all I would be surprised if you would not like to use the connection pooling feature of weblogic (in which case you might not be needing the import the classes directly), and would like to open direct connections to your database. Anyways for doing that I would recommend you to check out the readme doc that ships
along with the jdbc oracle (classes12.zip etc). I am giving an excerpt over here:
These are a few simple things that you should do in your JDBC program:
1. Import the necessary JDBC classes in your programs that use JDBC.
For example:
import java.sql.*;
import java.math.*;
2. Register the Oracle driver before before calling other JDBC APIs.
(This is not needed if you are using the JDBC Server-side Internal
Driver because registration is done automatically in the server.)
To register the Oracle driver, make sure the following statement
is executed at least once in your Java session:
DriverManager.registerDriver(
new oracle.jdbc.driver.OracleDriver());
3. Open a connection to the database with the getConnection call.
Different connection URLs should be used for different JDBC
drivers. The following examples demonstrate the different URLs.
For the JDBC OCI8 Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:oci8:@<database>",
"scott", "tiger");
where <database> is either an entry in tnsnames.ora or a SQL*net
name-value pair.
For the JDBC Thin Driver, or Server-side Thin Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:thin:@<database>",
"scott", "tiger");
where <database> is either a string of the form
<host>:<port>:<sid> or a SQL*net name-value pair.
For the JDBC Server-side Internal Driver:
Connection conn = DriverManager.getConnection(
"jdbc:oracle:kprb:");
Note that the trailing ':' character is necessary. When you use
the Server-side Internal Driver, you always connect to the
database you are executing in. You can also do this:
Connection conn
= new oracle.jdbc.driver.OracleDriver().defaultConnection();
Hope this helps,
Thanks,
Anupama wrote:
I am using oracle as database and weblogic 4.5. I have copied the classes12.zip file in lib directory of weblogic. I am getting the error that oracle.sql.* and oracle.jdbc.driver.* not found when i am importing these packages in a jsp file. what i need to do to import oracle driver packages?I put it in the classpath also.
Please Advice!
Thanks in advance
AnuPama--
Apurb Kumar

At least 005 errors found when certificates checked

Similar Messages

Maybe you are looking for