"at least 10 other projects use this file?"

Sometimes I get a message saying: "Are you sure you want to delete this file, at least 10 other projects use this file?"
But it is a brand new computer with a clean version of Logic, I only have 2 projects??!

I think that's not the exact of the message. Next time, try to make a note of the exact text, and that will help narrow down what's happening.

Similar Messages

Web Service Project using WSDL file

Hi All,
I want to create web service project using WSDL file(I already have a wsdl file), which needs axis2 run time to generate correct project structure, I did this in eclipse but now I want to do it through JDeveloper(11.1.2.0.0), so please suggest me any ways on how can I configure axis2 runtime in Jdeveloper, and is it possible do it in Jdevloper?
Thank You,
Sunny
Edited by: Sunny on May 8, 2012 1:51 AM

Have you installed the 64-bit Access driver on your machine? See
Data Source Names and 64-Bit Operating Systems for the differences in odbcad32. Call %SystemRoot%\system32\odbcad32.exe to check the drivers.
How do you host your service? Stand-alone or IIS or embedded to another application? Keep in mind that IIS7 runs it in its application pool which is defaullt 64bit. Thus the bad image exception, when compiling your service as 32bit.
When you need the Access database for your service to store informtation, then I would switch to SQL Server (Express) or XML files depending on your actual needs.
Also check whether your account under which your service is run has the necessary NTFS file permissions on the access file and the folder. This is getting even more complex when it's a remote folder.

Is it safe to update iOS (4.3.3/ 5.1.1/ any other version) using IPSW file?

Is it safe to update iOS (4.3.3/ 5.1.1/ any other version) using IPSW file?

Follow the directions here:
http://support.apple.com/kb/HT4972

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How can I store a word file in database and other one download this file

My dears:
I want to upload a word file at my form then store in database
and other one user want to download this file
I Use developer 10g R2
Database 1og
thanks more

If you take a look at the WebUtil page, there is a demo which can be downloaded. Look carefully at the option to upload to DB. If you want to manipulate the doc you can use OLE. This is also offered as part of the example.
http://www.oracle.com/technetwork/developer-tools/forms/webutil-090641.html
Be sure to carefully review the included ReadMe file as it includes some minor configuration required to use file upload/download functionality.

How can I share itunes music with others who use this computer??

I want to share my music with my granddaughter and she wants to share hers with me. We use the same computer but log in with different accounts. If the music is in the computer is seems there should be a way to share all the music. Can we do that??

There are sharing abilities built into iTunes. In the iTunes Help menu just type in "share."
I personally don't care for the way iTunes shares music. I have taken a different route. I use file sharing to share my Music folder with my wife.
From the Finder window right or control click on Music.
Select Get Info
At the bottom of Get Info click on the lock icon to unlock changes
Under Sharing click on the + to add access to another user.
Select you daughters id. and add her.
Give her Read Access.
Click on the Gear icon on the bottom and select "Apply to enclosed items."
Have you daughter do the same for you. You will now have access to each others music.
There are several ways you can listen to each others music.
To listen to just one song I just use the Finder method. Open Finder and click in the spotlight search field (upper right). Type in some criteria (i.e. Artist, partial title, album name). Files will appear in the finder window. Select the icon view option. You should see album artwork. Move your mouse over the track you want to listen to and your should see a play button appear. Not sure which OSX versions support this (10.6 does). Click on the play button. If you don't see a play button you can play by selecting Get Info. There is a play button in the preview section. You can also play with Quick View.
To listen to a playlist you will need a multimedia player like VLC (google it if you don't have it).
From iTunes you can export your playlist from File > Library > Export Playlist... (.m3u works well) Give your daughter read write access to the playlist file and from the Open With entry select VLC. (use the get info method)
Copy the playlist file to you daughters drop box in her public folder. Have your daughter use the get info function to make sure her copy still points to VLC and not to iTunes. If you open the playlist file with iTunes it may copy the tune files to her library. (don't want to end up with multiple copies of tunes on your Mac)
Double clicking on the playlist file will open VLC and begin playing. There is a playlist button on VLC to view, sort and select tunes from the list.
Phew! Hope that helped.
Dan
P.S. Haven't tested this with copy protected stuff.

Rebuild PremierePro project using Preview Files?

I'm using PP CS6 on a Mac and I have lost my original video files (long story but they are gone). The timeline still has the audio but instead of the video, I get a red screen missing media message.
However, in the Preview Files folder, I can see the full res previews from the entire project. Is there a way I can ask Premiere to use these preview files to rebuild and export the project?

Unfortunately, no.

Is it best to upload HD movies from a camcorder to iMovie or iPhoto. iMovie gives the option for very large file sizes - presumably it is best to use this file size because the HD movie is then at its best quality?

Is it best to upload hd movie to iPhoto or iMovie? iMovie seems to store the movie in much larger files - presumably this is preferable as a larger file is better quality?

Generally it is if you're comparing identical compressors & resolutions but there's something else happening here. If you're worried about quality degrading; check the original file details on the camera (or card) either with Get Info or by opening in QuickTime and showing info. You should find the iPhoto version (reveal in a Finder) is a straight copy. You can't really increase image quality of a movie (barring a few tricks) by increasing file size but Apple editing products create a more "scrub-able" intermediate file which is quite large.
Good luck and happy editing.

Why can't I use this file?

A friend sent me a song he made in an MPEG4 format. There's no video though, just audio. I've got a regular "old" 40G click-wheel iPod, and iTunes won't let me store the file there, saying it "cannot be played by this iPod." I know my iPod can't play video, I don't care to play video, and I'm wondering why the darn thing won't just play the audio (iTunes itself will, though). Every other media program I have is perfectly fine with the fact that it only has audio. Is there a way around this, or am I just screwed if I want to take a video-less MP4 with me off of my computer?
Sorry... don't have the funds to upgrade to a newer iPod, and I personally prefer more storage over having a fancy screen.

Check the compatible formats.
http://docs.info.apple.com/article.html?artnum=61476
Also, if it's an AAC file, check you have the most recent software version for the iPod.

HT3275 This is the message I get when My Time Capsule tells me why it can't perform the back up. How do I figure out what is using this file, and stop it

The backup disk image “/Volumes/Leslie Iversen's Time Capsu/Iversens' iMac.sparsebundle” is already in use. Thanks.

See Time Machine -- Troubleshooting by forum expert Pondini:
http://pondini.org/TM/Troubleshooting.html
#C12 is the item that you need to try to correct a bug in the Lion and Mountain Lion operating system.

How to access code in other projects?

Hi all,
I ran into an issue in FlexBuilder I'm not sure how to resolve, hopefully someone here can help. I have several projects in my workspace right now I'll call them project A and B. I have one project in particular, call that project C, that needs access to code contained in a couple of other projects, A and B. I don't want to copy all those files from the other projects into this one cause there's a lot of files, it's tedious, and unmaintainable. I don't want to make all those files into a flex library either cause it's not really necessary.
I tried adding the folders in project A and B into the source path of project C but when I tried to import those files it did not work. So does anyone know of a way that I can access code from other projects in the same workspace? If you could provide an example also that would be greatly appreciated.
Thanks in advance.
Additional info: The code complete for the import actually shows me the files in the source path are available. In fact, when I hit F3 it points me to the proper file in the other project. However, FlexBuilder keeps telling me the type was not found or it isn't a compile time constant.

Michael Borbor wrote:
I never said don't use OOP, Flex SDK is all about classes, and abstraction, but last time I check there wasn't polimorphism, so AS3 it's not yet a purely OO.
No polymorphism? You should check again. Just because overloading is not supported that does not mean that polymorphism can't be applied. Polymorphism does not start or end with overloading, please read up on polymorphism ( http://www.adobe.com/devnet/actionscript/articles/oop_as3_05.html or find a more generic definition and see that polymorphic principles can be applied in AS 3.0 too ).
No, ActionScript is not purely OOP, but what is? The only language I know of that is considered "a pure OOP language" is Java. Does that make other languages less good? Definitely not. Just because AS 3.0 does not support overloading it does not mean that OOP principles can't be applied and nor does it mean that it's not a valid OOP language.
Michael Borbor wrote:
Instead of learning this architectural stuff If I were new to Flex, first I'll learn what the heck is the Flex SDK, and obviously AS3, then I can move on to design patter, singletons, decorators, PureMVC, and so on.
Well, sice I don't know ehwhoknows and I have no idea how new he is ( he may be new to Flex but that doesn't mean that he is new to programming ), I took "the risk" to add an additional opinion to his post saying that "sure what ntsiii said is totally cool but in the future, you might want to read up on OOP and design patterns because they offer much more than mixing projects in a barbaric manner".
Obviously, if he is new to programming ( a detail that I don't see being mentioned in his post ) then he should stick to the simple things, but does that mean that we can't point out other solutions that may be more complex and harder to understand for a newbie at the moment. At least, he'll now know that there are other solutions out there too. Everything has it's time, but without telling him that "hey, solution A si ok, but solution B would be much better on the long run" then how do you expect him to find out about solution B? By accident?
I wasn't trying to prove anyone wrong, all that I wanted to point out is that there are other solutions out there too that offer much more on the long run. If he can't handle OOP at the moment, no problem, but at least give him the chance to try it out.
@ ATIF FAROOQ: I totally agree that it would be nice if the guys at Adobe would implement overloading and not only, abstract classes would be nice too ( and I mean "real abstract classes" like in Java, not workarounds ).
@ Muzak: Totally agree, I said to use a Library mainly because that's what I use most ( beside simply pasting classes from a project into another; I do this occasionally and sometimes when I'm lazy ). In either case, the final goal is achieved: reusability.
With best regards,
Barna Biro

HT2479 My camcorder produces m2ts format movies, can I import this file format to my iMac?

I'm looking to take the leap into Mac ownership but hit a problem today - my camcorder movies (m2ts format) look like they aren't supported by Apple. I have about 70 gb worth of movies and I'm concerned with the things I've read concerning the topic, namely that it's not straight forward to use this file format with iMovie. Does anyone have any advice to offer, perhaps being a similar situation? I'm not 100% sure that I'm correct about the incompatibility, I've found it hard to find a straight answer on the web - one confused, hopeful mac owner!........

Actually, AVCHDs load into Premiere Elements EASIER THAN mjpegs because the program is designed to use them (as long as you set up your project with a project preset that matches your AVCHD source specs).
Version 9 will even edit AVCHDs natively. That means that you don't have to render them before you edit them, as you did in earlier versions (including version 9). If you're going to edit AVCHDs, you really should get version 9. It handles them much more effciently.
But regardless, you won't see jitter related to the source files. Not with AVCHDs, if your project is set up properly.
You WILL however, need a powerful computer. At least a quad core or i7 computer. Otherwise the program will work very slowly.
The best advice for creating a DVD is to output your finished AVCHD video first using Share/To Computer/AVI using the DV settings. Then open a new project set up for DV, load the AVI to your timeline and output your DVD from there (using Share/To Disc). This will give you a sharper final video and will save you hours of rendering time.

Question- How to use HDV files in Premiere Pro

Hello everyone, I am new to using Mac's and the Adobe range as I have just started a course in film and television production.
I have recorded footage on a mini DV tape, in PAL HDV mpeg format, and transferred the footage from Tape to Digital Hard Disk at University (where it plays on Adobe Premiere Pro CS 5.5) but it will not respond once I add it to a sequence in Premiere or try to preview on my home laptop. There is no video or sound when I try to open using my laptop (just an empty black bar when I add to a sequence).
I have tried to find the answer or a Codec but with no success and I am trying to avoid working on the project on campus as I live an hour away and just spent a lot on the computer to avoid such trips.
Any help would be greatly appreciated.
Also I should add that the files play perfectly when I open them using Quick Time and the update option in Premiere is greyed out (not available)
thanks for your time

Hey Bill, thanks for the reply.
I am including some screenshots from Premiere.
I have contacted the seller I purchased the package from to check what he says, I cannot delete Premiere at this stage as I don't have a physical copy to reinstall
Also I see nowhere to upgrade or register the program
Also I have completed [projects using this version of Premiere with no issue, only they were not in HDV format.
Thanks for your time

Web Module Project and Javascript file

Hi,
I have developep my Web Module Project. Now i want integrate in the project a javascript file and call it from a html
file or a servlet. How can I do it??? In which folder of the project I have to save the javascript file??? (ex. script.js)....There is a tool in NWDS to manipulate javascript file???
THANKS

Hi,
You can place the js file inside webcontetnt folder itself. If there are lots of files, then create a folder called JS and paste the file inside this folder. Then you can use this file from JSP like this.
< script language="JavaScript" src = 'script.js'>
or
< script language="JavaScript" src = 'JS\script.js'>
Generally, JS files can be opened using notepad or wordpad from NWDS. There is no specific tool for it. Hope that answers your query.
Regards,
Harini S

Using flat file to upload in ABAP. Please help. Urgent

Hi all,
I am using a CSV excel file to upload some data to my ABAP program. Thje file contains material numbers as one of the fields. But if I enter the material number 11910892E80, excel converts it to 1.19E+87. Since I am using this file in the program to extract some fields from MARA, i am getting an error 'Material number does not exist'.
I know that we can avoid this problem by changing the format type of the cell to 'text' in excel. I want to know if there is any other way to rectify this problem. I have to use an excel file for upload. Notepad will not do.
Please help me solve this problem. It is urgent.
Thanks and regards,
Swaminath

Hi
If it is comma delimited file (CSV format) you can directly read the whole file and into a table with one field.
Loop at that table.
Use split a comma into fields of your internal table.
endloop.
Sample code
move pcfile to v_file.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                = v_file
      FILETYPE                = 'ASC'
      HAS_FIELD_SEPARATOR     = 'X'
    TABLES
      DATA_TAB                = in_rec
    EXCEPTIONS
      FILE_OPEN_ERROR         = 1
      FILE_READ_ERROR         = 2
      NO_BATCH                = 3
      GUI_REFUSE_FILETRANSFER = 4
      INVALID_TYPE            = 5
      NO_AUTHORITY            = 6
      UNKNOWN_ERROR           = 7
      BAD_DATA_FORMAT         = 8
      HEADER_NOT_ALLOWED      = 9
      SEPARATOR_NOT_ALLOWED   = 10
      HEADER_TOO_LONG         = 11
      UNKNOWN_DP_ERROR        = 12
      ACCESS_DENIED           = 13
      DP_OUT_OF_MEMORY        = 14
      DISK_FULL               = 15
      DP_TIMEOUT              = 16
      OTHERS                  = 17.
if sy-subrc ne 0.
    write:/5 'Error with PC file'.
endif.
loop at in_rec.
    if in_rec(4) ca number.
      split in_rec at p_del into
        itab-tcode itab-tcodet
        itab-saknr
        itab-waers1 itab-waers2
        itab-amt1   itab-amt2
        itab-gl itab-kostl
        itab-prctr itab-obukrs
        itab-otcode itab-otcodet.
      if itab-amt1 = '0.00' or itab-amt1 = space.      "skip this line
        continue.
      endif.
      move-corresponding itab to fitab.
      append fitab.
      clear: itab, fitab.
     append itab.
    endif.
endloop.

"at least 10 other projects use this file?"

Similar Messages

Maybe you are looking for