At least one of the input binary log files contain fewer than two data samples.

Hi Guys,
I encountered this error, when I stop the my defined collection set and try to see the related report in Performance Monitor. I searched on the Internet says that a fast start/stop man end without enough counter data being collected. However, it seems not
the case in my scenario. I set the sample interval to 15 seconds (default) and run the collection set more than 1.5 days.
By the way, I monitor the Windows Server 2008 SP1 server on a remote Windows 7 SP1, both of them are 64-bits. Only general performance counters are added such as CPU, DISK related. I am looking forward to your help. Thanks in advance.
P.S. I forgot to say, I set up a same data collector on the local computer (Windows 7 box), this does not happen. So, I believe I must has some configuration issues for remote monitor.
Please mark replies as helpful or answers if they are helful, doing so can help others encountering the similar issue.

Hi,
It works locally but  not remotely. I monitor Windows Server 2008 R2 SP1 (Enterprise 64-bit) remotely on Windows 7 SP1 (Ultimate, 64-bit), I start PerfMon using a domain account which is local administrator on both server boxes. I get a .cab files
for each data collection set, size from 1KB to 3KB. The sample internal is default 15 seconds and I believe the data collection set was started for more than 15 seconds or even hours. Here are steps to reproduce this issue:
On Win7 box, open performance monitor (PerfMon)
Connect to the remote WinSrv box
Create a data collection set, and add the following counters using default 15 seconds sample internal
 Processor(*)\% Privileged Time
 Processor(*)\% Processor Time 
Save and Start data collection set
After more than 15 seconds or even hours, I get the above error message.
Thanks in advance.
Please mark replies as helpful or answers if they are helful, doing so can help others encountering the similar issue.

Similar Messages

  • NImax.exe has generated errors. You must restart the program, a log file is being created.

    NImax.exe has generated errors. You must restart the program, a log file is
    being created.
    This error occurs just after bootup, no programs started except windows..
    Running Windows 2000 latest version on a brand new computer.
    (pent 4 3.0 ghz 500MB ram).
    Can anyone help me with this problem? Happened after install Labview 7.0
    express. Installed twice and same problem occured with both installs.
    Labview 7.0 is the only thing installed right now. Also selected "Visual
    Basic Support" install from driver cd's.
    One other thing I just noticed. System info reports 2 processors and I
    think I only have one.
    TIA

    Happy update.
    After ignoring this problem for awhile and installing some NI DAQ boards,
    this problem is not happening anymore.
    Would urge NI to investigate further though. Messed me up for a couple of
    days, and still don't know why it happened.
    Much thanks to those who helped.
    JJ
    "JJF" wrote in message
    news:qB6Hb.48702$VB2.90660@attbi_s51...
    > One other point, I found out this is a message generated by drwtsn32. Can
    > get rid of the error by unchecking "show visual feedback on errors" box,
    but
    > don't like that fix. Still need help.
    >
    > Thanks,
    >
    > JJ
    >
    > "JJF" wrote in message
    > news:%JRGb.138921$8y1.419649@attbi_s52...
    > > Hi Nirmal and all,
    > >
    > > Happy Holidays to you too, and thanks for the reply.
    > >
    > > Making progress. Did all the uninstalling and registry editing as you
    > > suggested. Also, updated Win2K at Microsoft.com as suggested.
    > > Re-installed with default settings of LV express 7.0. Now I only get
    > the
    > > error when I exit NImax.
    > >
    > > Also, my p2p home network is not that hot. Have it set up as a
    workgroup.
    > > Sometimes when I boot up I have file access between the two computers
    and
    > > sometimes windows explorer can't find the workgroup network path
    (between
    > > the two computers). Both computers can always access the internet
    though.
    > > Using a 4 port Linksys cable/dsl router on a cable modem. Using XP
    home
    > > edition on base computer (the one set up for the isp) and Win2K on the
    > other
    > > computer.
    > >
    > > Also, any idea where this log file is going? Thought it was part of the
    > > event viewer but the errors in the event viewer don't seem to correspond
    > to
    > > the NImax.exe logging event now. There is a file in
    > > "winnt\sytem32\config\software.log" that seems to change at about the
    same
    > > time but I can't access the file because it is in use by the system.
    > >
    > > Using NImax ver 3.02.3005. Do you know if I can download "NI
    measurement
    > > and automation explorer" and/or the driver cd's from NI.com? Maybe I
    have
    > a
    > > flaky disk or something. I have a feeling it may also have to do with
    the
    > > "on again/off again" network neighborhood connection problem.
    > >
    > >
    > > Thanks again,
    > >
    > > JJ
    > >
    > >
    > >
    > > "Nirmal Sharma" wrote in message
    > > news:506500000005000000AE470100-1068850981000@exch​ange.ni.com...
    > > > Hi,
    > > > Happy cristmas & new year for you & ur brand new pc...
    > > >
    > > > How are you uninstalling & then installing LV in your pc ?
    > > >
    > > > I suggest to remove complete LV (Remove All option) from your
    > > > computer. Once uninstallation is completed, go to windows registry -
    > > > by windows start -> run -> regedit -> Enter
    > > >
    > > > Goto HKEY_LOCAL_MACHINE-> SOFTWARE -> National Instruments - Delete
    > > > this folder (National Instruments folder)
    > > >
    > > > Remove any other foloder/file related to NI's software. Be very
    > > > cautious while deleting files from windows registry bcoz wrong file
    > > > deletion may hang your whole system.
    > > >
    > > > Restart your computer..hope it should bootup without any errors.
    > > >
    > > > Now as answered by Alexander, update windows.
    > > >
    > > > After updating, bootup your system. If it boots up without any error
    > > > message, install LV with the typical (default installation).
    > > >
    > > > Hope this helps. Your feedbacks are welcome.
    > > >
    > > > Best Regards,
    > > > Nirmal Sharma
    > > > India
    > >
    > >
    >
    >

  • How to correct the corrupted archive log files?

    Friends,
    Our restore method is cloning type.
    today i fired this statement(this is one is usually do for the restore) "recover database until cancel using backup controlfile"
    i have 60 files in the archive folder.
    it executs only 50 files when it comes to 51st file it came out and says could not copy the file.
    is that particular file is corrupted?
    or is there any restriction in copying no of archivelog files? i mean only 60 files like that.....
    suppose if the archive file is corrupted how can i correct it?
    thanks
    sathyguy

    Now, this is the error message....
    ORA-00310: archived log contains sequence 17480; sequence 17481 required
    ORA-00334 archived log; '/archive2/OURDB/archive/ar0000017481.arc'i googled....and find out.....
    ORA-00310 archived log contains sequence string; sequence string required
    Cause: The archived log is out of sequence, probably because it is corrupted or
    the wrong redo log file name was specified during recovery.
    Action: Specify the correct redo log file and then retry the operation.so...from the above error messages.....i think the particular archive file(17481) is corrupted. now can i correct this corrupted archive file.
    According to the above action, it says to specify the correct redo log file. if the file is not corrupted then where should i specify the redo log file's path?
    thanks
    sathyguy

  • Retrive Cookie Information in the Apache Access Log Files

    Hi All,
    Can anyone give me the solution or any link to follow the steps for retriving cookie information and user information in the Apache Access log files using httpd.conf file.
    we are using Oracle Appserver 10.1.2 Version and we have specfied below commands in httpd.conf file.
    LogFormat "%h %l %u %t \"%r\" %>s %b %v \"%{Referer}i\" \"%{User-Agent}i\" \"%{cookie}n\"" combined
    But it failed to retrive cookie and user informations
    Looking forward any one help.....
    Thanks
    Regards
    Sona

    Thanks for your reply
    Can u please check the below link for the cookie flag information
    http://download-west.oracle.com/docs/cd/B31017_01/web.1013/q20201/mod/mod_usertrack.html
    For your information i have logged in already.
    Our Sample O/p is given below
    151.146.191.186 - - [28/Dec/2006:10:13:05 +0530] "GET /Tab_files/lowerbox.gif HT
    TP/1.1" 200 150 - "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows)"
    We are using the below command format
    LogFormat "%h %l %u %t \"%r\" %>s %b %{cookie}n \"%{Referer}i\" \"%{User-Agent}i\"" combined
    But User and Cookie informations is not displaying.
    what steps should i follow.
    Looking for the favourable reply
    Thanks

  • Brarchive help - regrading the arch SID .log file ...

    Hi all,
    Recently, I have a disk filling up fast problem on the archivelog directory, so I have to do the following:
    01 - move some files to a temporary directory
    02 - run brarchive - SUCCESFUL with warnings due to the archivelogs that I moved
    03 - return some of the files that I moved to the original archivelog directory
    04 - make a copy of arch<SID>.log as arch<SID>.log.01
    05 - modify the arch<SID>.log file to start backing up from the files that I returned to its original directory
    06 - run brarchive again - SUCCESSFUL with warnings due to archivelogs that I moved and have not returned to the original directory
    07 - repeat the process from step 03 until all archivelogs has been backed up
    NOTE:
    - For step 04, I rename arch<SID>.log to arch<SID>.log.02 on the second run, arch<SID>.log.03 on its 3rd run and so on and so forth.
    Now after all is said and done, I end up with several files names arch<SID>.log.01, arch<SID>.log.02 .... arch<SID>.log.NN and arch<SID>.log.
    I want to know if anyone knows how I can combine all these files into one new arch<SID>.log file. Reason being is that some of the missing archivelogs that are reported in arch<SID>.log has actually already been backed up but are not recorded in the most recent arch<SID>.log file.
    I just discovered that I need to do this, otherwise brrestore will complain that the file to restore is not found because it is not in the most recent arch<SID>.log file.  Or maybe, is there a way to tell brrestore what arch<SID>.log file to use? That is, can I run brrestore and tell it to use arch<SID.log.01?
    Any feedback will be very much appreciated. Thanks in advance.

    This post has been duplicated, can't see the option to delete a thread so mark it as answered instead.

  • Moving the online redo log files to different location

    We just installed few more drives into our sandbox system and I want to move the online redo log files for better performance.  We've got the SAPARCH directory moved to a different location. 
    Does anyone know how/where I can change the parameters so redo log files are pointed at different drives?  It's not in the <b>init<SID>.ora</b> file...
    Regards,
    Sumit

    Hi Sumit,
    The following link contains information about moving the redo logs:
    http://www.stanford.edu/dept/itss/docs/oracle/9i/server.920/a96521/onlineredo.htm
    Best regards,
    Alwin

  • What determines the location of the shared services log files

    I've just completed an install and configuration of Shared Services 9.2.1. The shared services log files, SharedServices_Security.log, SharedServices_Admin.log, etc., are being written to the C:\WINDOWS\system32\null\logs\SharedServices9 path. These files should be written to the Tomcat application folders in the Shared Services home, CSS_HOME, folder. e.g. d:\hyperion\sharedservices\9.2\appserver\installedapps\tomcat\5.0.28. This is according to the Shared Services installation documentation.
    Is there any way to get these log files written to the d: drive? The following references sharedservices.logdir from the hsslogger.properties file but I don't see where a value is set that I can change.
    log4j.appender.FILE.File=${sharedservices.logdir}${file.separator}SharedServices_Security.log
    Thanks,
    Tom

    Hi there!
    Are you looking for the AOM log file?
    By default it´s located at:
    SIEBEL_ROOT\ENTERPRISE\SIEBEL_SERVER\log
    If you can´t find the AOM log files here, try to check the "Log directory" server parameter value.
    Best regards,
    João Paulo

  • The SiteLog_ appl_name .log  file in  $ORACLE_HOME/j2ee/log is not created

    Hello experts,
    The SiteLog_<appl_name>.log file in the $ORACLE_HOME/j2ee/log directory stopped to be created 2 days ago.
    No errors.
    Which reason can be for that? How to enable creating this file?
    Regards,
    Ram

    Hi,
    Are there any error when login OWA or ECP?
    As Ed mentioned, please post specific information about your question for further troubleshooting.
    Besides, please check to see if there is a SharedWebConfig.Config file in the following directories:
    <install drive>\Program Files\Microsoft\Exchange Server\V15\ClientAccess
    <install drive>\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy
    Also, here’s an thread about miss this file in relevant location. For your reference:
    https://social.technet.microsoft.com/Forums/office/en-US/6699ad92-701d-4966-b202-90c9be6bf735/exchange-2013-cu6-event-id-1003?forum=exchangesvrgeneral
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Allen Wang
    TechNet Community Support

  • How to increase the size and the number of log files

    OS Win2000 BD version Oracle8.0.5
    When i Execute a big Transaction, for example: Insert into a table with 100,000 records,
    Oracle tell me that archive log require,
    but I write log_archive_start =true in init.ora;
    I think Maybe the size of log file too small?
    Any other suggestion?
    Thanks

    Hello Long Guohui,
    If your Database is running in Archive Log mode and if the Automatic Archiving is not enable then obviously Oracle
    will ask that "Archive Log Required".
    But if your Database is running with NoArchive Log mode then Oracle should never ask you that "Archive Log Required".
    If your Database is running with Archive Log Mode then Oracle always recommends that the Tablespace where
    you are going to Insert the 1,00,000 records, make that Tablespace Mode from Logging to Nologging, so that
    Archive will not be generated for those entries because Redo does not Generate for that Tablespace as it is
    Running in Nologging mode. If Redo generates for those 1,00,000 entries then it may affect the other DML
    executing in you Database. So it is always recommended to do like this. But after the Insertion is done
    successfully Oracle recommends immediately takes the Back of that Tablespace where you have just
    Inserted 1,00,000 Data.
    For making a Tablespace Nologging:
    ALTER TABLESPACE <TABLESPACE NAME> NOLOGGING;
    For Making a Database from NoArchive to Archive:
    1)     SHUTDOWN IMMEDIATE
    2)     IN THE init<sid>.ora FILE SET THE FOLLOWING PARAMETER WITH VALUE:
    LOG_ARCHIVE_START = TRUE
    3)     STARTUP MOUNT
    4)     ALTER DATABASE ARCHIVE LOG
    5)     ALTER DATABASE OPEN

  • SCCM 2007 R2 Copying the sms setup log files ( C:\ConfigMgr*.lo*) failed.

    Copying the sms setup log files ( C:\ConfigMgr*.lo*) failed.
    Copying setup logs failed...
    Backup task completed successfully with zero errors but there could be some warnings, AFTERBACKUP.BAT will be started if available in its predefined location

    Just for the record!
    Check the permission of the folders SCCMBkp$ and SCCMBkpArch$, compare with a server that is working. Alfter that restart the services: (SMS_SITE_VSS_WRITER and SQL Server VSS Writer). Then Open the Smsbkup.log and restart the SMS_SITE_BACKUP and check the
    logs to see if works.

  • Looking for the Garbage Collection log files

    Hello,
    I am looking for the Garbage Collection log files which contain the GC events, like this:
    [GC 2095K->1709K(2160K), 0.0017628 secs]
    [Full GC 2161K->1018K(2276K), 0.0576353 secs]
    The server's GC is already configured accordingly:
    –verbose:gc
    I have examined the std_server<x>.out files at the work folder but can't see this info.
    My question is: Where would I find these files on the server?

    I can't find info in the format I know it not at dev_server* or std_server*.
    in std_server I see xml file like this:
    <gc type="scavenger" id="1" totalid="1" intervalms="0.000">
        <flipped objectcount="303111" bytes="24994248" />
        <tenured objectcount="0" bytes="0" />
        <refs_cleared soft="429" weak="4329" phantom="0" />
        <finalization objectsqueued="1711" />
        <scavenger tiltratio="50" />
        <nursery freebytes="497866672" totalbytes="524288000" percent="94" tenureage="10" />
        <tenured freebytes="1094921936" totalbytes="1098907648" percent="99" >
          <soa freebytes="1039977168" totalbytes="1043962880" percent="99" />
          <loa freebytes="54944768" totalbytes="54944768" percent="100" />
        </tenured>
        <time totalms="185.585" />
      </gc>
    I guess this is the info I need but it's not formatted in a way that your tool can read it and having a tool like this reading it is very helpful.
    Any ideas?

  • TS1424 i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?

    i downloaded an album but one of the songs only plays for a few seconds then skips to the next song. how do i fix this?

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that track from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes
    If you aren't in a country where you can re-download music or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • TS3212 I keep getting this error message "The folder path 'Program Files' contains an invalid character.' when upgrading itunes to Itunes 10. I could not uninstall because of the same error message. What needs to done?

    Can not download and install Itunes 10 - Get this message "The folder path 'Program Files' contain an invalid character. I tried to uninstall my old Itune through Control Panel but get the same message. What do I need to do?

    Perhaps try the following user tip with that one:
    "not a valid short file name" and "invalid character" install errors

  • ITunes Update attempt: "The folder path 'Program Files' contains an invalid character"

    How can I install the latest version when I get this message : "The folder path 'Program Files' contains an invalid character"? The message appears when I try to install the update and it appears when I try to uninstall the previous version. The instructions for manual uninstall says to use the Control Panel Uninstall Programs first and then "clean up" -- but I can't use the Control Panel Uninstall. I am running iTunes from an external drive. What to do?

    That's normally produced by a damaged iTunes.msi. The basic treatment for it is given in the following user tip:
    ["not a valid short file name" and "invalid character" install errors|http://discussions.apple.com/thread.jspa?threadID=2368028]
    ... but since Microsoft pulled the Windows Installer CleanUp utility from their Downloads Center, things have grown more difficult. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now start with *step 4* from the user tip, and proceed from there.
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Error Message:The folder path 'Program Files' contains an invalid character

    I have an 80G iPod. I never had a problem with the itunes program until I switched to Vista. When I try to open iTunes I get the following error message:
    *The folder path 'Program Files' contains an invalid character*
    I have itunes installed on both my HP and on an external hard drive that I use as my backup in case something goes wrong. Neither one opens and I get the same error message on both. I have tried to uninstall iTunes and then reinstall and get the same message so I can't uninstall.
    I'm really frustrated, I need to get to my music for a huge presentation in a few days. Can anyone help?
    Thanks in advance,
    Jejo

    Have you tried working through the steps in the General section of this article?
    http://support.apple.com/kb/HT1926

Maybe you are looking for