At least one record was skipped (authorization) infotype 0000

When i am displaying infotype 0000 i am recieving the message as below
At least one record was skipped (authorization) infotype 0000.
When i did SU53 it is not giving me solution of this problem.
Regards.
Afrasyab

we are using table P_ORGINCON instead of P_ORGIN and we have given Following authorization already Given.
AUthorization level R,M,D,S,W
infotype 0000-0004
personnel area 12*
EE Group E,F,G,H
remaining *
seems no problem here.
Afrasyab

Similar Messages

While doing the hiring, at least one infotype was skipped (authorization)

Hi All,
While doing the personnel actions (Hiring), 0000 and 0001 infotypes are skipping. straight away its going to 0002.
System is displaying the message, at least one infotype was skipped (authorization)
Thanks and Regards,
Revathi.

Hi,
While doing the personnel actions (Hiring), we are able to enter the 0000,0001 and 0002 infotypes. remaining infotypes are skipping.
Thanks and Regards,
Revathi.

Calendar Server Error: At least one sharee was not recognized by the server. New invitations have not been sent.

I deployed a Mountain Lion Server with the calendar service active. Every time a user tries to share a calendar they have created under thier account to an external person using thier email address, the server gives the following error: "At least one sharee was not recognized by the server. New invitations have not been sent."
Invites to share a calendar to OD accounts on the server seem to work fine.
I have a calendar specific email address for external invites set up. The server seems to send individual event invites to external email addresses just fine, so I am thinking the email is working. Email is not served on the Mountain Lion Server. The account is through Google Apps using IMAP and SMTP.
What's even stranger, is that there doesn't seem to be any message in the Calendar error logs.
I've tried creating a new test account and no luck.
I don't know what else to try.
Thanks in advance for any help!

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

At least one sharee was not recognized by the server. New invitations have not been sent.

I'm running 10.8.4, server 2.2.1 with Calendar server turned on.
I keep getting this error when trying to share a calendar from Calendar client: At least one sharee was not recognized by the server. New invitations have not been sent.
Any ideas?
Thanks.

another 3rd party sofwtare that allows you opent he backup and grab info
http://www.processtext.com/abcblackberry.html
trial for 30 days, good program for that 30 days, I hear they arent a pleasant company to purchase from though

Conversion File - Getting one record and skip the rest

Hi Experts,
I have one issue using conversion file. Is it possible to get only the records that we want without using SKIP? Example below:
Product
Partner
Invoice No
P1111
PA1
INV1
P2222
PA2
INV2
P5555
PA3
INV3
P9999
PA1
INV4
Let's say I want to get all the product number for partner - PA1.
Instead of using skip in the conversion file as below, is there another way to do in conversion file?
Internal
External
PA2
*SKIP
PA3
*SKIP
The reason is because I might have partner PA4, PA5 in future and i will need to modify the conversion file to include to SKIP PA4 and PA5.
Is there a way to get the data for partner PA1 only?
Appreciate your advice.
Thank you!
Best regards,
Ng

Hi Bishwajit,
Thank you for the response. I actually tried to use java script previously but I can't get it working. I am not really good at it. I tried several ways using if condition and SKIP but it keeps on fail with error saying "Java scription JS:IF(%EXTERNAL%!=PA1 THEN *SKIP) evaluation error".
Followings are the list of sample I have tried so far:
Internal - *
External - JS:IF(%EXTERNAL%!=PA1 THEN *SKIP) or
               JS:IF(%EXTERNAL%.string!=PA1 THEN *SKIP) or
               JS:IF(%EXTERNAL%!=PA1 THEN SKIP) or
               JS:IF(%EXTERNAL%.string!=PA1 THEN SKIP) or
               JS:IF(%EXTERNAL%.string()!=PA1 THEN *SKIP) and etc.
I am not sure if we can use SKIP in that way. Appreciate if you can advice on this.
Thank you.
Best regards,
Ng

Erro in bursting ZIP file must have at least one entry

Hi All ,
i am using bursting utility for xmlp report ,but getting the following error
--Exception
ZIP file must have at least one entry
java.util.zip.ZipException: ZIP file must have at least one entry
     at java.util.zip.ZipOutputStream.finish(ZipOutputStream.java:304)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:534)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:292)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
i have no clue y this error is coming ,any hint would be very helpful,
Thanks in advance
thanks
Pratap

Hi All
i got resolved this error (Erro in bursting ZIP file must have at least one entry) ,was doing very silly mistake i was using the template name instead of Data Definition code name in location string
location= ' '
so the ZIP file error is removed ,now getting one more error after this ,which i am not able to under stand
--Exception
/tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
java.io.FileNotFoundException: /tmp/011211_023243126/xdo1_164902_2.pdf (No such file or directory)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(FileInputStream.java:106)
     at java.io.FileInputStream.<init>(FileInputStream.java:66)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.zipOutputFiles(JCP4XDOBurstingEngine.java:532)
     at oracle.apps.xdo.oa.cp.JCP4XDOBurstingEngine.runProgram(JCP4XDOBurstingEngine.java:299)
     at oracle.apps.fnd.cp.request.Run.main(Run.java:161)
Please help me on this
Thanks
Pratap

DELETE infotype 0000 using HR_MAINTAIN_MASTERDATA or HR_INFOTYPE_OPERATION

Please kindly help ,
how to delete infotype using HR_MAINTAIN_MASTERDATA or HR_INFOTYPE_OPERATION?
i did try to use HR_INFOTYPE_OPERATION but return code shown as :
"No data stored for 0003 in the selected period"
but when i try using HR_MAINTAIN_MASTERDATA.
Return code was zero, and infotype 0000 still exist.
regards,
Rudy.

Here you go Rudy
Loopt at the your internal table. Lock the user, post or delete the record, unlock the user.
CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
      EXPORTING
        number       = t_file-pernr
      IMPORTING
        return       = t_return
        locking_user = w_uname.
    IF t_return-number IS NOT INITIAL.
      t_return-message_v1 = t_file-pernr.
      APPEND t_return.
      g_fail = g_fail + 1.
      g_flag = 'X'.
    ELSE.
      CLEAR: t_return, personaldatakey.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
          EXPORTING
            infty         = '2006'
            number        = t_file1-pernr
            subtype       = t_file1-subty
            validityend   = t_file1-endda
            validitybegin = t_file1-begda
            record        = p2006
            operation     = 'DEL'
            dialog_mode   = '1'
            nocommit      = ' '
          IMPORTING
            return        = t_return
            key           = personaldatakey.
      IF t_return-number IS NOT INITIAL.
        t_return-message_v1 = t_file-pernr.
        APPEND t_return.
        g_fail = g_fail + 1.
        g_flag = 'X'.
      ELSE.
        MOVE-CORRESPONDING t_file TO t_file1.
        APPEND t_file1.
        g_success = g_success + 1.
      ENDIF.
      "Unlock the employee
      CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
        EXPORTING
          number = t_file-pernr
        IMPORTING
          return = t_return.
Please award points if useful.
Thanks, Raj

Infotype 0000 Creation using HCM Processes and forms in MSS

Hi,
I need to create an Action for Transfer an employee using HCM Processes and Forms. So, my form should update infotype 0000, 0001, 0008 etc.
But when I provide create operation for infotype 0000, system is throwing short dump. When I change the operation to change nothing was creating in infotype 0000 for that respective employee. Is there any way to update infotype 0000 using HCM Processes and forms. Please help me here.
Thanks & Regards,
Nayani.

Hi Chris,
Thanks for your reply mate.
I understand that for IT0000 update we don't have to configure it explicitly.We just assign values to MASSG and MASSN and IT0000 should update. I am doing exactly that.
For the "condition" we do have multiple rules for that and I am familiar about the trickthat the rule fields must be part of the SAP_PA service which is actually making the update. That's all in place and that's working fine.
Now coming to the problem -
The "action" is "Return from Career Break" where the only PA infotype that has to be updated is IT0000. Besides that we are updating Absences,IT2001.
I have tested the process thoroughly and it seems that the system does not allow an IT0000 update without any other PA data change. To test this, I added a PA infotype update in my config and at that time IT0000 got updated beautifully. But when I am trying to update only IT0000, it fails.
To solve the issue, I had a discussion with my team and we have decided to copy IT0001 along with IT0000. So as of now, we have sorted out a workaround but the technical issue is something I would like to look into.
If you figure out anything then please let me know.
Appreciate your help.
Thanks,
Saikat

Fetching last but one record from Infotype

Hello Everyone,
Can you kindly let me know how to fetch the last but one records of IT0171 and IT0000, then compare the endda of both of the records.
Thank you for your help.
Regards,
Vinod

Hi,
First sort your internal table by ENDDA descending.
Then read index 2. This will give you the last but one record.
INFOTYPES: 0171.
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
    pernr           = '506'
    infty           = '0171'
    begda           = '18000101'
    endda           = '99991231'
TABLES
    infty_tab       = p0171
EXCEPTIONS
    infty_not_found = 1
    OTHERS          = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
SORT p0171 BY ENDDA descending.
READ TABLE p0171 INDEX 2. ---> reads the previous record of the last entry.
write:/ 'test'.
ENDIF.
Regards,
Soumya.

At least one required field was empty on export. Please fill in the required fields (highlighted)

"At least one required field was empty on export. Please fill in the required fields (highlighted)"
I'm tearing my hair out with this one. Have checked all the fields to confirm if I had set the Type as User Entered - Required. Can't find any such field. Any help would be appreciated. Is there an email id where I can send the form?

Hi,
In your script when you make an object visible, you also make it mandatory. No problem there!
However the script that hides the object goes through this sequence:
hide the object, THEN
make it optional/not mandatory.
This is where the problem lies.
You FIRST need to make the object optional/not mandatory AND THEN hide the object. It should just be a simple case of work through the various scripts and having the mandatory line before the presence line.
There is an example here: http://assure.ly/hxHupW.
Hope that helps,
Niall

Player Error: "You cannot record without enabling at least one track for recording"

So I'm trying to adjust my audio using the track mixer in premiere pro cc. I assigned 2 clips to a submix. When I tried to record, I got the following error: "You cannot record without enabling at least one track for recording." I disabled other tracks, then re enabled them all, muted them all, but still got the same error when I tried to record.

This is how I have just made a recording:
Select track to record (1), Select record (2) then press play to record.
Use the in-out markers in the program monitor to select the area to record.

At least one detail for every master record

I need at least one detail record for a master, how do I enforce this in the database.

You can use a deferrable foreign key constraint from the master to the detail, like this:
SQL> create table orders
2 ( id number(10) primary key
3 , customer varchar2(30) not null
4 , first_order_line_id number(10) not null
5 )
6 /
Tabel is aangemaakt.
SQL> create table order_lines
2 ( id number(10) primary key
3 , order_id number(10) not null references orders(id)
4 , product varchar2(30) not null
5 , quantity number(5) not null
6 )
7 /
Tabel is aangemaakt.
SQL> alter table orders
2 add constraint orders_ol_fk
3 foreign key (first_order_line_id)
4 references order_lines(id)
5 deferrable initially deferred
6 /
Tabel is gewijzigd.
SQL> insert into orders values (1,'Bill',1)
2 /
1 rij is aangemaakt.
SQL> commit
2 /
commit
FOUT in regel 1:
.ORA-02091: Transactie is teruggedraaid.
ORA-02291: Integriteitsbeperking (RWIJK.ORDERS_OL_FK) is geschonden - bovenliggende sleutel is niet gevonden.
SQL> rollback
2 /
Rollback is voltooid.
SQL> insert into order_lines values (1, 1, 'ballpoint', 10)
2 /
insert into order_lines values (1, 1, 'ballpoint', 10)
FOUT in regel 1:
.ORA-02291: Integriteitsbeperking (RWIJK.SYS_C0013213) is geschonden - bovenliggende sleutel is niet gevonden.
SQL> rollback
2 /
Rollback is voltooid.
SQL> insert into orders values (1,'Bill',1)
2 /
1 rij is aangemaakt.
SQL> insert into order_lines values (1, 1, 'ballpoint', 10)
2 /
1 rij is aangemaakt.
SQL> commit
2 /
Commit is voltooid.So, as Daniel Morgan said, your process should create both in one transaction. Suppose both tables use a sequence for their id, then you would need two nextval's in the creation of the master, and one currval during the creation of the detail.
Regards,
Rob.

Only one column was record on Trigger

Dear Experts,
I've created SQL Trigger, it has five column, but only one column was recorded when Trigger's fired, another filled by NULL value
please your valuable suggestion & helps
thank you
warmest regards

Triggers are fired by INSERT not matter how many rows it will generate and it is perfectly possible to have NULLs if columns allow it..
If you want to prevent from entering NULLs, please examine inserted virtual table to filter out the data which contains NULLs.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Master_detail for more than one record at a time

Hi,
How can i display master_detail records for more than one records at a time, for example, i have two tables A and B , A has username and role and B has username and profile. here i wanted to display 10 users at a time on my 6i form with username, role and profile.
i have created a master-detail relation ship with these tables when i'm executing F8 on blcok A , it displays 10 records on BlockA but, only one at a time on block B, how can i display all corresponding records on block B at a time.
Thanks for your help.Bcj

Thanks Roberts, that was realy informative due to some doubts i would like to confirm my requirements , i have two blocks A and B and each master record has only one detail record. but i wanted to display at least 10 master_detail relationships(records) on the form at a time, i would like to know is it possible to do without creating any table or view for example,
data in table A,
username role
AAA R1
BBB R2
CCC R3
data in table B,
username profile
AAA P1
BBB P2
CCC P3
i wanted to display it on form like below,
username role profile
AAA R1 P1
BBB R2 P2
CCC R3 P3
Also would like to know that how can i select data from dba_users, any restriction is there on forms 6i, i can select it on sqlplus.
Thanks Again, Bcj

XML import only creates one record at a time

Hi All,
I have an XML import map that automatically imports data into main product table. It's working fine when the XML file has only one main record. When it has more than one record, the import manager and import server can only import the last record in the file and skip the rest.
I already checked the record matching tab. It correctly shows that all records will be created and 0 will be skipped. Even the log file indicates all records are created after I execute the map. Yet, when I try to look for them in the data manager, I can only find the last one. If I execute the map with the exact same file again, it will create one more record again and skip the rest.
Someone else posted the same question a while back: Import map issue one record at a time. But it was never answered. Does anyone else have this issue? Is this a MDM bug?
Thanks,
Kenny

Hi Kenny,
Please refer to the note below:
Note 1575981
Regards,
Neethu Joy

At least one record was skipped (authorization) infotype 0000

Similar Messages

Maybe you are looking for