At reboot Delicious plugin doesn't retain logon with box checked and also resyncs bookmarks which takes a long time.
FF appears not to be saving settings. Bookmarking can take 5 minjtes or longer. I don't really want it to sync the bookmarks but can't find anyplace to turn that off.
hello, palemoon's support forums are here: http://forum.palemoon.org/
Similar Messages
-
[Solved] Shutdown/Reboot takes a long time
I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
[ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
[ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
[ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
[ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
[ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
[ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
[ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
[ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
[ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
[ 0.000000] On node 0 totalpages: 2089813
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12143 pages used for memmap
[ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
[ 0.000000] Normal zone: 20448 pages used for memmap
[ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3299.649 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
[ 0.000022] pid_max: default: 32768 minimum: 301
[ 0.000025] ACPI: Core revision 20141107
[ 0.002006] ACPI: All ACPI Tables successfully acquired
[ 0.229873] Security Framework initialized
[ 0.229877] Yama: becoming mindful.
[ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.231738] Initializing cgroup subsys memory
[ 0.231741] Initializing cgroup subsys devices
[ 0.231743] Initializing cgroup subsys freezer
[ 0.231744] Initializing cgroup subsys net_cls
[ 0.231745] Initializing cgroup subsys blkio
[ 0.231759] CPU: Physical Processor ID: 0
[ 0.231759] CPU: Processor Core ID: 0
[ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.231764] mce: CPU supports 9 MCE banks
[ 0.231772] CPU0: Thermal monitoring enabled (TM1)
[ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.232422] ftrace: allocating 21171 entries in 83 pages
[ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
[ 0.271688] TSC deadline timer enabled
[ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.271712] ... version: 3
[ 0.271712] ... bit width: 48
[ 0.271713] ... generic registers: 8
[ 0.271714] ... value mask: 0000ffffffffffff
[ 0.271714] ... max period: 0000ffffffffffff
[ 0.271715] ... fixed-purpose events: 3
[ 0.271715] ... event mask: 00000007000000ff
[ 0.291699] x86: Booting SMP configuration:
[ 0.291700] .... node #0, CPUs: #1
[ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.305029] #2 #3
[ 0.334799] x86: Booted up 1 node, 4 CPUs
[ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
[ 0.336656] devtmpfs: initialized
[ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
[ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
[ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
[ 0.338196] pinctrl core: initialized pinctrl subsystem
[ 0.338227] RTC time: 18:49:17, date: 04/22/15
[ 0.338286] NET: Registered protocol family 16
[ 0.349856] cpuidle: using governor ladder
[ 0.363177] cpuidle: using governor menu
[ 0.363192] ACPI: bus type PCI registered
[ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.363234] PCI: not using MMCONFIG
[ 0.363235] PCI: Using configuration type 1 for base access
[ 0.376685] ACPI: Added _OSI(Module Device)
[ 0.376686] ACPI: Added _OSI(Processor Device)
[ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.378832] ACPI: Dynamic OEM Table Load:
[ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.379146] ACPI: Interpreter enabled
[ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
[ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.379157] ACPI: Using IOAPIC for interrupt routing
[ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[ 0.381932] PCI host bridge to bus 0000:00
[ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
[ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
[ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
[ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
[ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
[ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
[ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
[ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
[ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
[ 0.383621] pci 0000:01:00.0: supports D1 D2
[ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
[ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
[ 0.383708] pci 0000:01:00.1: supports D1 D2
[ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
[ 0.390139] pci 0000:03:00.0: supports D1 D2
[ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
[ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
[ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.403403] pci 0000:06:00.0: supports D1 D2
[ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.410302] vgaarb: loaded
[ 0.410303] vgaarb: bridge control possible 0000:01:00.0
[ 0.410339] PCI: Using ACPI for IRQ routing
[ 0.415815] PCI: pci_cache_line_size set to 64 bytes
[ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
[ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
[ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
[ 0.415918] NetLabel: Initializing
[ 0.415919] NetLabel: domain hash size = 128
[ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.415927] NetLabel: unlabeled traffic allowed by default
[ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.417956] Switched to clocksource hpet
[ 0.420722] pnp: PnP ACPI init
[ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
[ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.420993] pnp 00:02: [dma 0 disabled]
[ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
[ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
[ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.421295] pnp: PnP ACPI: found 7 devices
[ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
[ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
[ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
[ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.427107] NET: Registered protocol family 2
[ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.427422] TCP: reno registered
[ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.427479] NET: Registered protocol family 1
[ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.427703] PCI: CLS 64 bytes, default 64
[ 0.427731] Unpacking initramfs...
[ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
[ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
[ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
[ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.458503] Scanning for low memory corruption every 60 seconds
[ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.458653] Initialise system trusted keyring
[ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.459596] zpool: loaded
[ 0.459598] zbud: loaded
[ 0.459684] VFS: Disk quotas dquot_6.5.2
[ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.459788] Key type big_key registered
[ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.459910] io scheduler noop registered
[ 0.459911] io scheduler deadline registered
[ 0.459926] io scheduler cfq registered (default)
[ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[ 0.460245] vesafb: scrolling: redraw
[ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
[ 0.507010] Console: switching to colour frame buffer device 175x65
[ 0.553487] fb0: VESA VGA frame buffer device
[ 0.553501] intel_idle: MWAIT substates: 0x1120
[ 0.553502] intel_idle: v0.4 model 0x2A
[ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.553594] GHES: HEST is not enabled!
[ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.574369] Linux agpgart interface v0.103
[ 0.574402] rtc_cmos 00:03: RTC can wake from S4
[ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.574537] Intel P-state driver initializing.
[ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.575069] TCP: cubic registered
[ 0.575206] NET: Registered protocol family 10
[ 0.575527] NET: Registered protocol family 17
[ 0.576245] Loading compiled-in X.509 certificates
[ 0.576267] registered taskstats version 1
[ 0.577040] Magic number: 11:338:848
[ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
[ 0.577255] PM: Hibernation image not present or could not be loaded.
[ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
[ 0.577674] Write protecting the kernel read-only data: 8192k
[ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
[ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
[ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.596674] ACPI: bus type USB registered
[ 0.596690] usbcore: registered new interface driver usbfs
[ 0.596697] usbcore: registered new interface driver hub
[ 0.596714] usbcore: registered new device driver usb
[ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.597010] ehci-pci: EHCI PCI platform driver
[ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
[ 0.598329] SCSI subsystem initialized
[ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
[ 0.601141] libata version 3.00 loaded.
[ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.607929] hub 1-0:1.0: USB hub found
[ 0.607934] hub 1-0:1.0: 2 ports detected
[ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
[ 0.608319] hub 2-0:1.0: USB hub found
[ 0.608327] hub 2-0:1.0: 2 ports detected
[ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
[ 0.611688] hub 3-0:1.0: USB hub found
[ 0.611696] hub 3-0:1.0: 2 ports detected
[ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
[ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.621236] hub 4-0:1.0: USB hub found
[ 0.621248] hub 4-0:1.0: 2 ports detected
[ 0.621321] ahci 0000:00:1f.2: version 3.0
[ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.668448] scsi host0: ahci
[ 0.668750] scsi host1: ahci
[ 0.669100] scsi host2: ahci
[ 0.669412] scsi host3: ahci
[ 0.669697] scsi host4: ahci
[ 0.669967] scsi host5: ahci
[ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
[ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
[ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
[ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
[ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
[ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
[ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
[ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
[ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
[ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
[ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 0.988746] ata1.00: configured for UDMA/133
[ 0.988881] ata3.00: configured for UDMA/100
[ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
[ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.990752] ata2.00: disabling queued TRIM support
[ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
[ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.992466] ata4.00: configured for UDMA/133
[ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
[ 0.997177] ata2.00: disabling queued TRIM support
[ 1.000401] ata2.00: configured for UDMA/133
[ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
[ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
[ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
[ 1.015296] ata1.00: Enabling discard_zeroes_data
[ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
[ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
[ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.015524] ata1.00: Enabling discard_zeroes_data
[ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015779] sda: sda1 sda2
[ 1.016099] ata1.00: Enabling discard_zeroes_data
[ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.016225] sdb: sdb1
[ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.022237] sdc: sdc1 sdc2
[ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.038098] hub 1-1:1.0: USB hub found
[ 1.038285] hub 1-1:1.0: 6 ports detected
[ 1.051455] hub 4-1:1.0: USB hub found
[ 1.051648] hub 4-1:1.0: 8 ports detected
[ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.443537] systemd[1]: Detected architecture 'x86-64'.
[ 1.443740] systemd[1]: Set hostname to <arch>.
[ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
[ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
[ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
[ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 1.537662] systemd[1]: Reached target Remote File Systems.
[ 1.537672] systemd[1]: Starting Remote File Systems.
[ 1.537692] systemd[1]: Reached target Encrypted Volumes.
[ 1.537701] systemd[1]: Starting Encrypted Volumes.
[ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 1.538002] systemd[1]: Created slice Root Slice.
[ 1.538014] systemd[1]: Starting Root Slice.
[ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 1.538120] systemd[1]: Listening on Journal Socket.
[ 1.538134] systemd[1]: Starting Journal Socket.
[ 1.538265] systemd[1]: Created slice User and Session Slice.
[ 1.538276] systemd[1]: Starting User and Session Slice.
[ 1.545589] systemd[1]: Listening on Journal Audit Socket.
[ 1.545747] systemd[1]: Created slice System Slice.
[ 1.545765] systemd[1]: Starting System Slice.
[ 1.546248] systemd[1]: Mounting Huge Pages File System...
[ 1.546789] systemd[1]: Mounting Debug File System...
[ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
[ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
[ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.548678] systemd[1]: Starting Setup Virtual Console...
[ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
[ 1.550613] systemd[1]: Starting Load Kernel Modules...
[ 1.550645] systemd[1]: Started File System Check on Root Device.
[ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.551836] systemd[1]: Created slice system-getty.slice.
[ 1.551850] systemd[1]: Starting system-getty.slice.
[ 1.551870] systemd[1]: Reached target Slices.
[ 1.551883] systemd[1]: Starting Slices.
[ 1.551931] systemd[1]: Listening on udev Kernel Socket.
[ 1.551941] systemd[1]: Starting udev Kernel Socket.
[ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
[ 1.552492] systemd[1]: Starting Journal Service...
[ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 1.552600] systemd[1]: Listening on udev Control Socket.
[ 1.552611] systemd[1]: Starting udev Control Socket.
[ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
[ 1.552689] systemd[1]: Reached target Login Prompts.
[ 1.552701] systemd[1]: Starting Login Prompts.
[ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
[ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
[ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
[ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
[ 1.555736] systemd[1]: Mounting Temporary Directory...
[ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.556363] systemd[1]: Mounted Huge Pages File System.
[ 1.556388] systemd[1]: Mounted Debug File System.
[ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.557030] systemd[1]: Started Setup Virtual Console.
[ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
[ 1.557431] systemd[1]: Mounted Temporary Directory.
[ 1.558591] hub 1-1.5:1.0: USB hub found
[ 1.558901] hub 1-1.5:1.0: 4 ports detected
[ 1.560366] vboxdrv: Found 4 processor cores.
[ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
[ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
[ 1.561712] systemd[1]: Started Load Kernel Modules.
[ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.569830] systemd[1]: Started udev Coldplug all Devices.
[ 1.575918] systemd[1]: Mounted FUSE Control File System.
[ 1.576374] systemd[1]: Mounting Configuration File System...
[ 1.576805] systemd[1]: Starting Apply Kernel Variables...
[ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 1.582712] systemd[1]: Started Rebuild Hardware Database.
[ 1.582739] systemd[1]: Started First Boot Wizard.
[ 1.582757] systemd[1]: Started Create System Users.
[ 1.583212] systemd[1]: Starting Load/Save Random Seed...
[ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.584599] systemd[1]: Mounted Configuration File System.
[ 1.587256] systemd[1]: Started Load/Save Random Seed.
[ 1.589801] systemd[1]: Started Apply Kernel Variables.
[ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
[ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
[ 1.608492] systemd[1]: Starting Local File Systems (Pre).
[ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
[ 1.637443] systemd[1]: Started udev Kernel Device Manager.
[ 1.649393] systemd[1]: Started Journal Service.
[ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
[ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.813310] ACPI: Power Button [PWRB]
[ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.813371] ACPI: Power Button [PWRF]
[ 1.817850] wmi: Mapper loaded
[ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
[ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.907839] [drm] Initialized drm 1.1.0 20060810
[ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 1.913064] fuse init (API version 7.23)
[ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
[ 1.914093] usbcore: registered new interface driver usblp
[ 1.916048] AVX version of gcm_enc/dec engaged.
[ 1.916050] AES CTR mode by8 optimization enabled
[ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 1.925198] usbcore: registered new interface driver usbhid
[ 1.925200] usbhid: USB HID core driver
[ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
[ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
[ 1.926137] sound hdaudioC0D1: inputs:
[ 1.926139] sound hdaudioC0D1: Front Mic=0x19
[ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
[ 1.926142] sound hdaudioC0D1: Line=0x1a
[ 1.934672] iTCO_vendor_support: vendor-support=0
[ 1.934826] [drm] radeon kernel modesetting enabled.
[ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
[ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
[ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
[ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 1.941825] AMD IOMMUv2 functionality not available on this system
[ 1.943447] CRAT table not found
[ 1.943449] Finished initializing topology ret=0
[ 1.943479] kfd kfd: Initialized module
[ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
[ 1.943670] fb: switching to radeondrmfb from VESA VGA
[ 1.943685] Console: switching to colour dummy device 80x25
[ 1.943797] random: nonblocking pool is initialized
[ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
[ 1.943890] [drm] register mmio base: 0xFE620000
[ 1.943891] [drm] register mmio size: 131072
[ 1.943923] ATOM BIOS: CAYMAN
[ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
[ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
[ 1.943977] [drm] RAM width 256bits DDR
[ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
[ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.944039] [TTM] Initializing pool allocator
[ 1.944043] [TTM] Initializing DMA pool allocator
[ 1.944058] [drm] radeon: 2048M of VRAM memory ready
[ 1.944059] [drm] radeon: 1024M of GTT memory ready.
[ 1.944068] [drm] Loading CAYMAN Microcode
[ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 1.951281] [drm] Internal thermal controller with fan control
[ 1.955166] [drm] radeon: dpm initialized
[ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
[ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.957733] intel_rapl: Found RAPL domain package
[ 1.957736] intel_rapl: Found RAPL domain core
[ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[ 1.979020] radeon 0000:01:00.0: WB enabled
[ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
[ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
[ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
[ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
[ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
[ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
[ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.979806] [drm] Driver supports precise vblank timestamp query.
[ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
[ 1.980067] [drm] radeon: irq initialized.
[ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
[ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
[ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
[ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
[ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
[ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
[ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
[ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
[ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
[ 2.118008] mousedev: PS/2 mouse device common for all mice
[ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
[ 2.175917] [drm] UVD initialized successfully.
[ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
[ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
[ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
[ 2.328709] [drm] ib test on ring 5 succeeded
[ 2.329264] [drm] Radeon Display Connectors
[ 2.329265] [drm] Connector 0:
[ 2.329266] [drm] DP-1
[ 2.329267] [drm] HPD5
[ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 2.329268] [drm] Encoders:
[ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
[ 2.329269] [drm] Connector 1:
[ 2.329270] [drm] DP-2
[ 2.329270] [drm] HPD4
[ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[ 2.329271] [drm] Encoders:
[ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
[ 2.329272] [drm] Connector 2:
[ 2.329273] [drm] HDMI-A-1
[ 2.329273] [drm] HPD6
[ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 2.329274] [drm] Encoders:
[ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
[ 2.329275] [drm] Connector 3:
[ 2.329276] [drm] DVI-D-1
[ 2.329276] [drm] HPD1
[ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 2.329277] [drm] Encoders:
[ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
[ 2.329278] [drm] Connector 4:
[ 2.329279] [drm] DVI-I-1
[ 2.329279] [drm] HPD3
[ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[ 2.329280] [drm] Encoders:
[ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
[ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.408814] [drm] fb mappable at 0xC0475000
[ 2.408816] [drm] vram apper at 0xC0000000
[ 2.408816] [drm] size 8294400
[ 2.408817] [drm] fb depth is 24
[ 2.408818] [drm] pitch is 7680
[ 2.408899] fbcon: radeondrmfb (fb0) is primary device
[ 2.435470] Console: switching to colour frame buffer device 240x67
[ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.438498] radeon 0000:01:00.0: registered panic notifier
[ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
[ 2.459456] Switched to clocksource tsc
[ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
[ 2.687833] r8169 0000:06:00.0 enp6s0: link down
[ 2.687846] r8169 0000:06:00.0 enp6s0: link down
[ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
[ 20.764979] r8169 0000:06:00.0 enp6s0: link up
[ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[ 256.173829] device-mapper: uevent: version 1.0.3
[ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
[ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
[ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
[ 256.800019] raid6: sse2x1 7801 MB/s
[ 256.856622] raid6: sse2x2 11630 MB/s
[ 256.913233] raid6: sse2x4 15648 MB/s
[ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
[ 256.913235] raid6: using ssse3x2 recovery algorithm
[ 256.913829] xor: automatically using best checksumming function:
[ 256.946535] avx : 32756.400 MB/sec
[ 256.954986] Btrfs loaded
[ 603.210136] watchdog watchdog0: watchdog did not stop!
[ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
[ 603.325462] systemd-shutdown[1]: Unmounting file systems.
[ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
[ 603.402438] systemd-shutdown[1]: Deactivating swaps.
[ 603.402507] systemd-shutdown[1]: All swaps deactivated.
[ 603.402511] systemd-shutdown[1]: Detaching loop devices.
[ 603.403097] systemd-shutdown[1]: All loop devices detached.
[ 603.403101] systemd-shutdown[1]: Detaching DM devices.
[ 603.403156] systemd-shutdown[1]: All DM devices detached.
[ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
Would appreciate some input regarding this. Thanks!
EDIT: This is on gnome 3.16. Not sure if that matters.
Last edited by devrepublic (2015-05-13 03:24:19)ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
From my own experience, I can say that:
1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
6. What we committed here is a massive thread hijacking.
Last edited by Lockheed (2015-04-24 05:27:51) -
my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help
OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan -
Unfortunately any enhancements that you've made with FF5 don't outweigh the loss of my bookmarks in the Google Toolbar. How do I go back to FF4?
Install the following Add-on until Google releases a new version of their toolbar that is compatible with Firefox 5. Most Add-ons that worked with Firefox 4 should still work with Firefox 5, but the developers need to update a line in their Add-on's code to indicate with which versions of Firefox the Add-on is compatible. The following Add-on adds a "Compatibility" button in your Add-ons > Extensions that you may need to click after installing it and restarting Firefox.
*Add-on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/15003
<br />
<br />
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again. -
When trying to play embedded WMA absolutely NOTHING happens. An error message saying there's a problem with the quicktime plugin appears, when encountering embedded quicktime, but it dissapears before I can press "more".
As for realmedia I have to reload page 2-3 times before it works.
And all plugins are up todateCycle count is on the high side, but condition is normal.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own". -
Shutdown/reboot occasionally takes a long time - log attached
Shutting down or rebooting occasionally takes around a minute to finish. It always hangs when rebooting from gnome, but shuts down normally when gdm is disabled. Hoping somebody can help me figure out the issue. The log was generated from following the instructions here (as according to the wiki).
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.4-1-ARCH (builduser@tobias) (gcc version 4.9.2 (GCC) ) #1 SMP PREEMPT Fri Nov 21 21:14:42 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cffbcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffbd000-0x00000000cffc3fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffc4000-0x00000000d09a4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d09a5000-0x00000000d0e7dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0e7e000-0x00000000d7db3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d7db4000-0x00000000d7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8000000-0x00000000d8758fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8759000-0x00000000d87fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d8800000-0x00000000d8f95fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8f96000-0x00000000d8ffffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9000000-0x00000000da71bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da71c000-0x00000000da7fffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000da800000-0x00000000dbcf4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbcf5000-0x00000000dbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. Latitude E7440/ , BIOS A10 06/26/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 021EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdbcf5 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd980-0x000fd98f] mapped at [ffff8800000fd980]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff88000008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2c000, 0x01b2cfff] PGTABLE
[ 0.000000] BRK [0x01b2d000, 0x01b2dfff] PGTABLE
[ 0.000000] BRK [0x01b2e000, 0x01b2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ec00000-0x21edfffff]
[ 0.000000] [mem 0x21ec00000-0x21edfffff] page 2M
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21ebfffff]
[ 0.000000] [mem 0x21c000000-0x21ebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcffbcfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcffbcfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcffc4000-0xd09a4fff]
[ 0.000000] [mem 0xcffc4000-0xcfffffff] page 4k
[ 0.000000] [mem 0xd0000000-0xd07fffff] page 2M
[ 0.000000] [mem 0xd0800000-0xd09a4fff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd0e7e000-0xd7db3fff]
[ 0.000000] [mem 0xd0e7e000-0xd0ffffff] page 4k
[ 0.000000] [mem 0xd1000000-0xd7bfffff] page 2M
[ 0.000000] [mem 0xd7c00000-0xd7db3fff] page 4k
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xd8000000-0xd8758fff]
[ 0.000000] [mem 0xd8000000-0xd85fffff] page 2M
[ 0.000000] [mem 0xd8600000-0xd8758fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd8800000-0xd8f95fff]
[ 0.000000] [mem 0xd8800000-0xd8dfffff] page 2M
[ 0.000000] [mem 0xd8e00000-0xd8f95fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xd9000000-0xda71bfff]
[ 0.000000] [mem 0xd9000000-0xda5fffff] page 2M
[ 0.000000] [mem 0xda600000-0xda71bfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xda800000-0xdbcf4fff]
[ 0.000000] [mem 0xda800000-0xdbbfffff] page 2M
[ 0.000000] [mem 0xdbc00000-0xdbcf4fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3793e000-0x37c96fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000EEE40 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000D8FEB088 00008C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8FFCA40 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8FEB1A0 01189F (v02 DELL CBX3 00000014 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000DA7FE080 000040
[ 0.000000] ACPI: APIC 0x00000000D8FFCB50 000072 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D8FFCBC8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000D8FFCC10 000176 (v03 DELL CBX3 01072009 MSFT 00010013)
[ 0.000000] ACPI: LPIT 0x00000000D8FFCD88 00005C (v01 DELL CBX3 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8FFCDE8 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D8FFD010 00051F (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000D8FFD530 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: HPET 0x00000000D8FFE008 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8FFE040 000455 (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000D8FFE498 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: ASF! 0x00000000D8FFE4D8 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 0x00000000D8FFE580 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21edfffff]
[ 0.000000] NODE_DATA [mem 0x21edf5000-0x21edf8fff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216400000-ffff88021e3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00090fff]
[ 0.000000] node 0: [mem 0x00100000-0xcffbcfff]
[ 0.000000] node 0: [mem 0xcffc4000-0xd09a4fff]
[ 0.000000] node 0: [mem 0xd0e7e000-0xd7db3fff]
[ 0.000000] node 0: [mem 0xd8000000-0xd8758fff]
[ 0.000000] node 0: [mem 0xd8800000-0xd8f95fff]
[ 0.000000] node 0: [mem 0xd9000000-0xda71bfff]
[ 0.000000] node 0: [mem 0xda800000-0xdbcf4fff]
[ 0.000000] node 0: [mem 0x100000000-0x21edfffff]
[ 0.000000] On node 0 totalpages: 2072932
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13968 pages used for memmap
[ 0.000000] DMA32 zone: 893908 pages, LIFO batch:31
[ 0.000000] Normal zone: 18360 pages used for memmap
[ 0.000000] Normal zone: 1175040 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdd200000-0xdf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffbd000-0xcffc3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd09a5000-0xd0e7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd7db4000-0xd7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8759000-0xd87fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8f96000-0xd8ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda71c000-0xda7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbcf5000-0xdbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88021ea00000 s86848 r8192 d23744 u524288
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2040519
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8078868K/8291728K available (5386K kernel code, 896K rwdata, 1712K rodata, 1140K init, 1176K bss, 212860K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:728 0
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.901 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5389.29 BogoMIPS (lpj=8979670)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20140724
[ 0.010739] ACPI: All ACPI Tables successfully acquired
[ 0.011418] Security Framework initialized
[ 0.011422] Yama: becoming mindful.
[ 0.011795] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.012985] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013489] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013496] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013648] Initializing cgroup subsys memory
[ 0.013652] Initializing cgroup subsys devices
[ 0.013654] Initializing cgroup subsys freezer
[ 0.013656] Initializing cgroup subsys net_cls
[ 0.013657] Initializing cgroup subsys blkio
[ 0.013673] CPU: Physical Processor ID: 0
[ 0.013674] CPU: Processor Core ID: 0
[ 0.013677] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.014508] mce: CPU supports 7 MCE banks
[ 0.014517] CPU0: Thermal monitoring enabled (TM1)
[ 0.014526] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.014605] Freeing SMP alternatives memory: 20K (ffffffff819ff000 - ffffffff81a04000)
[ 0.015196] ftrace: allocating 20686 entries in 81 pages
[ 0.021855] dmar: Host address width 39
[ 0.021856] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.021864] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.021865] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.021868] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.021869] dmar: RMRR base: 0x000000d7f18000 end: 0x000000d7f26fff
[ 0.021870] dmar: RMRR base: 0x000000dd000000 end: 0x000000df1fffff
[ 0.021999] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.021999] HPET id 0 under DRHD base 0xfed91000
[ 0.022000] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.022120] Enabled IRQ remapping in x2apic mode
[ 0.022121] Enabling x2apic
[ 0.022121] Enabled x2apic
[ 0.022127] Switched APIC routing to cluster x2apic.
[ 0.022688] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055682] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (fam: 06, model: 45, stepping: 01)
[ 0.055688] TSC deadline timer enabled
[ 0.055706] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.055721] ... version: 3
[ 0.055722] ... bit width: 48
[ 0.055722] ... generic registers: 4
[ 0.055723] ... value mask: 0000ffffffffffff
[ 0.055724] ... max period: 0000ffffffffffff
[ 0.055724] ... fixed-purpose events: 3
[ 0.055725] ... event mask: 000000070000000f
[ 0.079128] x86: Booting SMP configuration:
[ 0.079130] .... node #0, CPUs: #1
[ 0.093091] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.099781] #2 #3
[ 0.134365] x86: Booted up 1 node, 4 CPUs
[ 0.134368] smpboot: Total of 4 processors activated (21559.17 BogoMIPS)
[ 0.137752] devtmpfs: initialized
[ 0.139439] PM: Registering ACPI NVS region [mem 0xcffbd000-0xcffc3fff] (28672 bytes)
[ 0.139440] PM: Registering ACPI NVS region [mem 0xda71c000-0xda7fffff] (933888 bytes)
[ 0.140040] pinctrl core: initialized pinctrl subsystem
[ 0.140074] RTC time: 12:39:50, date: 11/28/14
[ 0.140138] NET: Registered protocol family 16
[ 0.140215] cpuidle: using governor ladder
[ 0.140216] cpuidle: using governor menu
[ 0.140235] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.140237] ACPI: bus type PCI registered
[ 0.140238] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.140291] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.140293] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.140352] PCI: Using configuration type 1 for base access
[ 0.140357] dmi type 0xB1 record - unknown flag
[ 0.151341] ACPI: Added _OSI(Module Device)
[ 0.151343] ACPI: Added _OSI(Processor Device)
[ 0.151344] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.151346] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.154871] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.168502] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.439291] ACPI: Dynamic OEM Table Load:
[ 0.439298] ACPI: SSDT 0xFFFF880212E9C800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.452760] ACPI: Dynamic OEM Table Load:
[ 0.452766] ACPI: SSDT 0xFFFF880212EA1800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.465955] ACPI: Dynamic OEM Table Load:
[ 0.465960] ACPI: SSDT 0xFFFF880212E98A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.505925] ACPI: Interpreter enabled
[ 0.505936] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.505944] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.505966] ACPI: (supports S0 S3 S4 S5)
[ 0.505968] ACPI: Using IOAPIC for interrupt routing
[ 0.506003] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.205381] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.205387] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.205596] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 1.205719] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 1.206310] PCI host bridge to bus 0000:00
[ 1.206313] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 1.206314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.206315] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.206316] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.206317] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.206318] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 1.206319] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 1.206321] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff]
[ 1.206326] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 1.206399] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 1.206408] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 1.206412] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 1.206416] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 1.206477] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 1.206483] pci 0000:00:03.0: reg 0x10: [mem 0xf7e34000-0xf7e37fff 64bit]
[ 1.206564] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 1.206578] pci 0000:00:14.0: reg 0x10: [mem 0xf7e20000-0xf7e2ffff 64bit]
[ 1.206625] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 1.206656] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 1.206685] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 1.206702] pci 0000:00:16.0: reg 0x10: [mem 0xf7e3f000-0xf7e3f01f 64bit]
[ 1.206759] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.206817] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[ 1.206831] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 1.206838] pci 0000:00:16.3: reg 0x14: [mem 0xf7e3d000-0xf7e3dfff]
[ 1.206949] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[ 1.206962] pci 0000:00:19.0: reg 0x10: [mem 0xf7e00000-0xf7e1ffff]
[ 1.206968] pci 0000:00:19.0: reg 0x14: [mem 0xf7e3c000-0xf7e3cfff]
[ 1.206974] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 1.207020] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 1.233897] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 1.233944] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 1.233959] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e30000-0xf7e33fff 64bit]
[ 1.234023] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.234070] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.234112] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 1.234186] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.234233] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.234275] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 1.234351] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.234400] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 1.234440] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
[ 1.234515] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 1.234563] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.234604] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 1.234624] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e3b000-0xf7e3b3ff]
[ 1.234709] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.234755] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.234794] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 1.234969] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 1.234983] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 1.234990] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 1.234996] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 1.235003] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 1.235009] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 1.235016] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e3a000-0xf7e3a7ff]
[ 1.235049] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.235117] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 1.235130] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e39000-0xf7e390ff 64bit]
[ 1.235148] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 1.235293] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.235440] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 1.235526] pci 0000:02:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit]
[ 1.235818] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.235853] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 1.240619] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.240624] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.242509] pci 0000:03:00.0: [1217:8520] type 00 class 0x080501
[ 1.242531] pci 0000:03:00.0: reg 0x10: [mem 0xf7c01000-0xf7c01fff]
[ 1.242544] pci 0000:03:00.0: reg 0x14: [mem 0xf7c00000-0xf7c007ff]
[ 1.242675] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 1.242706] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.249034] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 1.249038] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.249112] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 1.327642] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.327687] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.327728] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.327770] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 1.327810] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 1.327851] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 1.327892] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 1.327935] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394531] ACPI: Enabled 2 GPEs in block 00 to 7F
[ 1.394582] ACPI : EC: GPE = 0x27, I/O: command/status = 0x934, data = 0x930
[ 1.394688] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.394690] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.394694] vgaarb: loaded
[ 1.394695] vgaarb: bridge control possible 0000:00:02.0
[ 1.394734] PCI: Using ACPI for IRQ routing
[ 1.395964] PCI: pci_cache_line_size set to 64 bytes
[ 1.396001] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 1.396002] e820: reserve RAM buffer [mem 0xcffbd000-0xcfffffff]
[ 1.396003] e820: reserve RAM buffer [mem 0xd09a5000-0xd3ffffff]
[ 1.396004] e820: reserve RAM buffer [mem 0xd7db4000-0xd7ffffff]
[ 1.396005] e820: reserve RAM buffer [mem 0xd8759000-0xdbffffff]
[ 1.396006] e820: reserve RAM buffer [mem 0xd8f96000-0xdbffffff]
[ 1.396007] e820: reserve RAM buffer [mem 0xda71c000-0xdbffffff]
[ 1.396008] e820: reserve RAM buffer [mem 0xdbcf5000-0xdbffffff]
[ 1.396009] e820: reserve RAM buffer [mem 0x21ee00000-0x21fffffff]
[ 1.396083] NetLabel: Initializing
[ 1.396084] NetLabel: domain hash size = 128
[ 1.396085] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.396093] NetLabel: unlabeled traffic allowed by default
[ 1.396109] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.396113] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.398135] Switched to clocksource hpet
[ 1.401902] pnp: PnP ACPI init
[ 1.401962] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.401964] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.402136] system 00:01: [io 0x0680-0x069f] has been reserved
[ 1.402138] system 00:01: [io 0xffff] has been reserved
[ 1.402139] system 00:01: [io 0xffff] has been reserved
[ 1.402140] system 00:01: [io 0xffff] has been reserved
[ 1.402142] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 1.402143] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 1.402144] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 1.402145] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 1.402146] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 1.402148] system 00:01: [io 0x164e-0x164f] has been reserved
[ 1.402149] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.402171] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.402203] system 00:03: [io 0x1854-0x1857] has been reserved
[ 1.402205] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.402235] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.402236] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.402261] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.402277] pnp 00:06: Plug and Play ACPI device, IDs DLL05cb PNP0f13 (active)
[ 1.558185] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 1.558436] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.558675] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.558677] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.558679] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.558681] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.558683] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.558685] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.558687] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 1.558688] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.558690] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 1.558692] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.558694] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 1.558696] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 1.558698] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.771390] pnp: PnP ACPI: found 10 devices
[ 1.777666] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.777674] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.777678] pci 0000:00:1c.3: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 1.777683] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 1.777686] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 1.777692] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.777693] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.777694] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.777695] pci_bus 0000:00: resource 7 [mem 0x000dc000-0x000dffff]
[ 1.777696] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff]
[ 1.777697] pci_bus 0000:00: resource 9 [mem 0x000e4000-0x000e7fff]
[ 1.777698] pci_bus 0000:00: resource 10 [mem 0xdf200000-0xfeafffff]
[ 1.777700] pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 1.777701] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 1.777719] NET: Registered protocol family 2
[ 1.777860] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.777958] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.778072] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.778085] TCP: reno registered
[ 1.778093] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.778113] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.778156] NET: Registered protocol family 1
[ 1.778166] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.828082] PCI: CLS 64 bytes, default 64
[ 1.828123] Unpacking initramfs...
[ 1.871405] Freeing initrd memory: 3428K (ffff88003793e000 - ffff880037c97000)
[ 1.871424] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.871426] software IO TLB [mem 0xd3db4000-0xd7db4000] (64MB) mapped at [ffff8800d3db4000-ffff8800d7db3fff]
[ 1.871552] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 1.871585] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
[ 1.871591] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
[ 1.871595] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
[ 1.871600] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
[ 1.871631] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 1.871649] Scanning for low memory corruption every 60 seconds
[ 1.871815] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.871825] Initialise system trusted keyring
[ 1.872058] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.872928] zpool: loaded
[ 1.872930] zbud: loaded
[ 1.873057] VFS: Disk quotas dquot_6.5.2
[ 1.873081] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.873166] msgmni has been set to 15785
[ 1.873205] Key type big_key registered
[ 1.873310] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.873339] io scheduler noop registered
[ 1.873341] io scheduler deadline registered
[ 1.873360] io scheduler cfq registered (default)
[ 1.873673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.873684] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.873710] intel_idle: MWAIT substates: 0x11142120
[ 1.873711] intel_idle: v0.4 model 0x45
[ 1.873711] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.873880] GHES: HEST is not enabled!
[ 1.873930] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.894509] 0000:00:16.3: ttyS0 at I/O 0xf0e0 (irq = 19, base_baud = 115200) is a 16550A
[ 1.894671] Linux agpgart interface v0.103
[ 1.894705] rtc_cmos 00:02: RTC can wake from S4
[ 1.894815] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.894841] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.894850] Intel P-state driver initializing.
[ 1.894963] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.895225] TCP: cubic registered
[ 1.895445] NET: Registered protocol family 10
[ 1.895950] NET: Registered protocol family 17
[ 1.896572] Loading compiled-in X.509 certificates
[ 1.896602] registered taskstats version 1
[ 1.897570] Magic number: 6:540:684
[ 1.897594] mem full: hash matches
[ 1.897726] rtc_cmos 00:02: setting system clock to 2014-11-28 12:39:51 UTC (1417178391)
[ 1.897938] PM: Hibernation image not present or could not be loaded.
[ 1.899781] Freeing unused kernel memory: 1140K (ffffffff818e2000 - ffffffff819ff000)
[ 1.899784] Write protecting the kernel read-only data: 8192k
[ 1.904598] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 1.905436] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 1.910882] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 1.921373] ACPI: bus type USB registered
[ 1.921400] usbcore: registered new interface driver usbfs
[ 1.921411] usbcore: registered new interface driver hub
[ 1.921439] usbcore: registered new device driver usb
[ 1.922121] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.922128] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.922197] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.922219] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.922426] hub 1-0:1.0: USB hub found
[ 1.922436] hub 1-0:1.0: 9 ports detected
[ 1.923225] sdhci: Secure Digital Host Controller Interface driver
[ 1.923226] sdhci: Copyright(c) Pierre Ossman
[ 1.924570] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.924575] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.924728] hub 2-0:1.0: USB hub found
[ 1.924735] hub 2-0:1.0: 4 ports detected
[ 1.926216] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.927853] i8042: Warning: Keylock active
[ 1.929889] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.930158] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.930199] ehci-pci: EHCI PCI platform driver
[ 1.930305] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.930310] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.930318] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.930320] ehci-pci 0000:00:1d.0: debug port 2
[ 1.931767] sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 1.931904] mmc0: Unknown controller version (3). You may experience problems.
[ 1.931981] sdhci-pci 0000:03:00.0: No vmmc regulator found
[ 1.931983] sdhci-pci 0000:03:00.0: No vqmmc regulator found
[ 1.932090] mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA
[ 1.932514] SCSI subsystem initialized
[ 1.933310] libata version 3.00 loaded.
[ 1.934212] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.934225] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7e3b000
[ 1.941283] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.941466] hub 3-0:1.0: USB hub found
[ 1.941474] hub 3-0:1.0: 3 ports detected
[ 1.941892] ahci 0000:00:1f.2: version 3.0
[ 1.942016] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.942031] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.942048] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl RAID mode
[ 1.942050] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag led clo only pio slum part sxs deso sadm sds apst
[ 1.942412] scsi host0: ahci
[ 1.942526] scsi host1: ahci
[ 1.942614] scsi host2: ahci
[ 1.942647] ata1: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a100 irq 43
[ 1.942648] ata2: SATA max UDMA/133 abar m2048@0xf7e3a000 port 0xf7e3a180 irq 43
[ 1.942649] ata3: DUMMY
[ 1.943843] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.261227] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.281258] usb 1-1: new low-speed USB device number 2 using xhci_hcd
[ 2.475146] usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.475161] usb 1-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.478305] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.510160] usbcore: registered new interface driver usbhid
[ 2.510165] usbhid: USB HID core driver
[ 2.511015] input: CM Storm Side print as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:2516:0017.0001/input/input2
[ 2.511112] hid-generic 0003:2516:0017.0001: input,hidraw0: USB HID v1.10 Keyboard [CM Storm Side print] on usb-0000:00:14.0-1/input0
[ 2.511272] input: CM Storm Side print as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:2516:0017.0002/input/input3
[ 2.511327] hid-generic 0003:2516:0017.0002: input,hidraw1: USB HID v1.10 Device [CM Storm Side print] on usb-0000:00:14.0-1/input1
[ 2.581125] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.583960] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.583963] ata2.00: ATA-9: SAMSUNG SSD PM841 mSATA 256GB, DXT43D0Q, max UDMA/133
[ 2.583966] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.584417] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.584475] ata2.00: configured for UDMA/133
[ 2.584621] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM84 3D0Q PQ: 0 ANSI: 5
[ 2.587762] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.587854] sd 1:0:0:0: [sda] Write Protect is off
[ 2.587857] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.587892] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.588390] sda: sda1 sda2 sda3 < sda5 > sda4
[ 2.588778] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.634390] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 2.816687] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
[ 2.865339] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.868904] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.2/0003:046D:C52B.0005/0003:046D:C52B.0006/input/input4
[ 2.868997] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-2:1
[ 2.874352] tsc: Refined TSC clocksource calibration: 2693.763 MHz
[ 2.974263] usb 1-4: new high-speed USB device number 4 using xhci_hcd
[ 3.181887] systemd[1]: systemd 217 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN )
[ 3.182035] systemd[1]: Detected architecture 'x86-64'.
[ 3.194133] systemd[1]: Set hostname to <arch>.
[ 3.319189] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.319237] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.319247] systemd[1]: Starting Login Prompts.
[ 3.319555] systemd[1]: Reached target Login Prompts.
[ 3.319564] systemd[1]: Starting Remote File Systems.
[ 3.319842] systemd[1]: Reached target Remote File Systems.
[ 3.319850] systemd[1]: Starting Encrypted Volumes.
[ 3.320124] systemd[1]: Reached target Encrypted Volumes.
[ 3.320135] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.320161] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.320168] systemd[1]: Starting Paths.
[ 3.320442] systemd[1]: Reached target Paths.
[ 3.320458] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 3.320800] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.320807] systemd[1]: Expecting device dev-sda5.device...
[ 3.320988] systemd[1]: Starting Root Slice.
[ 3.323556] systemd[1]: Created slice Root Slice.
[ 3.323563] systemd[1]: Starting User and Session Slice.
[ 3.323908] systemd[1]: Created slice User and Session Slice.
[ 3.323915] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.324219] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.324225] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.324496] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.324502] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.324767] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.324773] systemd[1]: Starting Journal Socket (/dev/log).
[ 3.325039] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.325045] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.325308] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.325315] systemd[1]: Starting udev Kernel Socket.
[ 3.325583] systemd[1]: Listening on udev Kernel Socket.
[ 3.325590] systemd[1]: Starting udev Control Socket.
[ 3.325848] systemd[1]: Listening on udev Control Socket.
[ 3.325854] systemd[1]: Starting Journal Socket.
[ 3.326116] systemd[1]: Listening on Journal Socket.
[ 3.326125] systemd[1]: Starting System Slice.
[ 3.326463] systemd[1]: Created slice System Slice.
[ 3.326470] systemd[1]: Starting system-getty.slice.
[ 3.326811] systemd[1]: Created slice system-getty.slice.
[ 3.326818] systemd[1]: Starting File System Check on Root Device...
[ 3.327219] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.327665] systemd[1]: Mounting Debug File System...
[ 3.329906] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.330515] systemd[1]: Mounting Huge Pages File System...
[ 3.331523] systemd[1]: Started Load Kernel Modules.
[ 3.331542] systemd[1]: Starting Apply Kernel Variables...
[ 3.332076] systemd[1]: Mounting Configuration File System...
[ 3.332535] systemd[1]: Starting udev Coldplug all Devices...
[ 3.333027] systemd[1]: Mounted FUSE Control File System.
[ 3.333050] systemd[1]: Starting Setup Virtual Console...
[ 3.334003] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.334022] systemd[1]: Starting Journal Service...
[ 3.334127] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.334690] systemd[1]: Starting Slices.
[ 3.334989] systemd[1]: Reached target Slices.
[ 3.335017] systemd[1]: Mounting Temporary Directory...
[ 3.336387] systemd[1]: Mounted Configuration File System.
[ 3.336662] systemd[1]: Mounted Huge Pages File System.
[ 3.336952] systemd[1]: Mounted Debug File System.
[ 3.337249] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.337670] systemd[1]: Mounted Temporary Directory.
[ 3.338263] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.347562] systemd[1]: Started udev Coldplug all Devices.
[ 3.349093] systemd[1]: Started Apply Kernel Variables.
[ 3.360430] systemd[1]: Started Setup Virtual Console.
[ 3.361945] systemd[1]: Started Journal Service.
[ 3.372168] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 3.378564] systemd-journald[140]: Received request to flush runtime journal from PID 1
[ 3.390115] systemd-journald[140]: File /var/log/journal/b51a0177d316449caf53fe2b64b1689f/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.393413] Adding 1048572k swap on /swapfile. Priority:-1 extents:34 across:4669436k SSFS
[ 3.457862] hub 3-1:1.0: USB hub found
[ 3.457961] hub 3-1:1.0: 8 ports detected
[ 3.724128] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[ 3.739102] [drm] Initialized drm 1.1.0 20060810
[ 3.741581] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 3.743113] ACPI: Lid Switch [LID0]
[ 3.743160] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 3.743164] ACPI: Power Button [PBTN]
[ 3.743201] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 3.743203] ACPI: Sleep Button [SBTN]
[ 3.743242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 3.743244] ACPI: Power Button [PWRF]
[ 3.755369] [drm] Memory usable by graphics device = 2048M
[ 3.755372] [drm] Replacing VGA console driver
[ 3.755398] Console: switching to colour dummy device 80x25
[ 3.759294] pps_core: LinuxPPS API ver. 1 registered
[ 3.759297] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 3.760878] PTP clock support registered
[ 3.764787] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.764790] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 3.778751] ACPI: AC Adapter [AC] (on-line)
[ 3.787026] parport_pc 00:07: [io 0x0378-0x037b]
[ 3.787038] parport_pc 00:07: [io 0x0278-0x027b]
[ 3.787045] parport_pc 00:07: [io 0x03bc-0x03bf]
[ 3.787053] parport_pc 00:07: [io 0x0378-0x037b]
[ 3.787088] parport_pc 00:07: [irq 7]
[ 3.790976] random: nonblocking pool is initialized
[ 3.800656] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 3.800666] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.800668] [drm] Driver supports precise vblank timestamp query.
[ 3.801337] mousedev: PS/2 mouse device common for all mice
[ 3.802241] media: Linux media interface: v0.10
[ 3.805123] Linux video capture interface: v2.00
[ 3.809744] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_HD (0c45:64d2)
[ 3.814123] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.832699] FAT-fs (sda5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3.837953] [drm] VBT doesn't support DRRS
[ 3.848883] input: Laptop_Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input9
[ 3.848968] usbcore: registered new interface driver uvcvideo
[ 3.848970] USB Video Class driver (1.1.1)
[ 3.854759] input: PC Speaker as /devices/platform/pcspkr/input/input11
[ 3.869915] AVX2 version of gcm_enc/dec engaged.
[ 3.876562] Switched to clocksource tsc
[ 3.882384] fbcon: inteldrmfb (fb0) is primary device
[ 3.882459] Console: switching to colour frame buffer device 240x67
[ 3.882465] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.882466] i915 0000:00:02.0: registered panic notifier
[ 3.887311] usb 3-1.5: new full-speed USB device number 4 using ehci-pci
[ 3.912518] intel_rapl: Found RAPL domain package
[ 3.912522] intel_rapl: Found RAPL domain core
[ 3.912525] intel_rapl: Found RAPL domain uncore
[ 3.912528] intel_rapl: Found RAPL domain dram
[ 3.978405] usb 3-1.5: config 0 has an invalid interface number: 3 but max is 2
[ 3.978408] usb 3-1.5: config 0 has no interface number 2
[ 3.993260] usb 3-1.5: config 0 descriptor??
[ 4.037309] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.064411] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 4.090652] parport_pc 00:07: activated
[ 4.090656] parport_pc 00:07: reported by Plug and Play ACPI
[ 4.130601] thermal LNXTHERM:00: registered as thermal_zone1
[ 4.130604] ACPI: Thermal Zone [THM] (25 C)
[ 4.151928] parport_pc 00:07: disabled
[ 4.157798] ppdev: user-space parallel port driver
[ 4.169350] Bluetooth: Core ver 2.19
[ 4.169361] NET: Registered protocol family 31
[ 4.169362] Bluetooth: HCI device and connection manager initialized
[ 4.169367] Bluetooth: HCI socket layer initialized
[ 4.169368] Bluetooth: L2CAP socket layer initialized
[ 4.169370] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 4.169372] Bluetooth: SCO socket layer initialized
[ 4.169452] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 4.170062] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.170182] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 4.174918] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.174936] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 4.182932] cfg80211: Calling CRDA to update world regulatory domain
[ 4.183119] usbcore: registered new interface driver btusb
[ 4.189926] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 4.189928] Copyright(c) 2003- 2014 Intel Corporation
[ 4.190062] iwlwifi 0000:02:00.0: irq 47 for MSI/MSI-X
[ 4.190411] iTCO_vendor_support: vendor-support=0
[ 4.190433] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7260-10.ucode failed with error -2
[ 4.196550] iwlwifi 0000:02:00.0: loaded firmware version 25.222.9.0 op_mode iwlmvm
[ 4.197715] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4.199063] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4.200857] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.200888] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 4.201317] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.214582] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 4.214636] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.214850] iwlwifi 0000:02:00.0: L1 Disabled - LTR Enabled
[ 4.275919] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[ 4.281456] nfc: nfc_init: NFC Core ver 0.1
[ 4.281470] NET: Registered protocol family 39
[ 4.283456] Probing NFC pn544
[ 4.343007] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 4.343011] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) ec:f4:bb:14:77:65
[ 4.343013] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.343046] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.343328] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 4.343334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.343540] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 4.343587] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 4.343986] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 4.352670] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 4.352737] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 4.352872] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 4.355566] sound hdaudioC1D0: autoconfig: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 4.355569] sound hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 4.355570] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 4.355571] sound hdaudioC1D0: mono: mono_out=0x0
[ 4.355572] sound hdaudioC1D0: inputs:
[ 4.355574] sound hdaudioC1D0: Dock Mic=0x19
[ 4.355575] sound hdaudioC1D0: Headset Mic=0x1a
[ 4.355576] sound hdaudioC1D0: Internal Mic=0x12
[ 4.360866] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input17
[ 4.361019] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 4.361075] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 4.361139] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 4.403743] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4.416656] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 4.430486] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[ 4.543423] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 4.643752] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 4.643829] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 4.689285] ACPI: Battery Slot [BAT0] (battery present)
[ 4.794785] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.795000] wmi: Mapper loaded
[ 4.799246] input: Dell WMI hotkeys as /devices/virtual/input/input21
[ 5.224839] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input13
[ 5.237027] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input10
[ 6.151404] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 6.151408] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 6.151433] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 6.527588] fuse init (API version 7.23)
[ 10.170530] systemd-journald[140]: File /var/log/journal/b51a0177d316449caf53fe2b64b1689f/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 14.976527] chrome[733]: segfault at 1f8 ip 00007ff21fe5890f sp 00007fff86758840 error 4 in i965_dri.so[7ff21fb05000+51c000]
[ 15.169665] chrome[824]: segfault at 1f8 ip 00007fe9538bf90f sp 00007fff0bf57760 error 4 in i965_dri.so[7fe95356c000+51c000]
[ 15.355866] chrome[840]: segfault at 1f8 ip 00007f1f6fe3590f sp 00007fffa6addc80 error 4 in i965_dri.so[7f1f6fae2000+51c000]
[ 376.347724] device-mapper: uevent: version 1.0.3
[ 376.347783] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 376.998227] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 377.002394] JFS: nTxBlock = 8192, nTxLock = 65536
[ 377.008924] ntfs: driver 2.1.30 [Flags: R/W MODULE].
[ 377.074399] raid6: sse2x1 10270 MB/s
[ 377.131047] raid6: sse2x2 13023 MB/s
[ 377.187704] raid6: sse2x4 14859 MB/s
[ 377.244330] raid6: avx2x1 20305 MB/s
[ 377.300974] raid6: avx2x2 23534 MB/s
[ 377.357619] raid6: avx2x4 27195 MB/s
[ 377.357620] raid6: using algorithm avx2x4 (27195 MB/s)
[ 377.357621] raid6: using avx2x2 recovery algorithm
[ 377.360716] xor: automatically using best checksumming function:
[ 377.390937] avx : 32226.000 MB/sec
[ 377.400530] Btrfs loaded
[ 378.240319] EXT4-fs (sda3): unable to read superblock
[ 378.241248] EXT4-fs (sda3): unable to read superblock
[ 378.242031] EXT4-fs (sda3): unable to read superblock
[ 378.242984] FAT-fs (sda3): FAT read failed (blocknr 46)
[ 378.244005] XFS (sda3): Invalid superblock magic number
[ 378.247073] FAT-fs (sda3): FAT read failed (blocknr 46)
[ 378.249584] ntfs: (device sda3): is_boot_sector_ntfs(): Invalid boot sector checksum.
[ 378.249587] ntfs: (device sda3): read_ntfs_boot_sector(): Primary boot sector is invalid.
[ 378.249589] ntfs: (device sda3): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
[ 378.249590] ntfs: (device sda3): ntfs_fill_super(): Not an NTFS volume.
[ 378.250506] MINIX-fs: unable to read superblock
[ 378.251392] attempt to access beyond end of device
[ 378.251395] sda3: rw=16, want=3, limit=2
[ 378.251397] hfsplus: unable to find HFS+ superblock
[ 378.252183] ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep
>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 378.253713] hfs: can't find a HFS filesystem on dev sda3
[ 383.958842] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 474.281808] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 474.283777] systemd-journald[140]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 474.334882] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 474.336853] systemd-shutdown[1]: Hardware watchdog 'INTCAMT', version 0
[ 474.336989] systemd-shutdown[1]: Unmounting file systems.
[ 474.337077] systemd-shutdown[1]: Unmounting /sys/fs/fuse/connections.
[ 474.351428] systemd-shutdown[1]: Unmounting /sys/kernel/config.
[ 474.364595] systemd-shutdown[1]: Unmounting /dev/hugepages.
[ 474.398169] systemd-shutdown[1]: Unmounting /sys/kernel/debug.
[ 474.427977] systemd-shutdown[1]: Unmounting /dev/mqueue.
[ 474.503917] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 474.507364] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 474.507366] EXT4-fs (sda4): re-mounted. Opts: (null)
[ 474.507374] systemd-shutdown[1]: All filesystems unmounted.
[ 474.507376] systemd-shutdown[1]: Deactivating swaps.
[ 474.507416] systemd-shutdown[1]: All swaps deactivated.
[ 474.507418] systemd-shutdown[1]: Detaching loop devices.
[ 474.507974] systemd-shutdown[1]: All loop devices detached.
[ 474.507977] systemd-shutdown[1]: Detaching DM devices.
[ 474.508001] systemd-shutdown[1]: All DM devices detached.
[ 474.515958] EXT4-fs (sda4): re-mounted. Opts: data=orderedgraysky wrote:What about with alternative greeter like lxdm?
It works fine with lxdm, so I guess this is a gdm specific problem. I'd prefer to use gdm though, if only because it supports suspend on lid close. -
Systemd takes a long time to reboot
I read the wiki article here
and followed these instructions, but I couldn't find anything useful in the log information afterwards.
I am just wondering if anyone else has experienced this issue, and has any suggestions?
It seems like it hangs right after shutting down dhcpcd - is there a way to log the output of the actual shutdown (the one that shows when you issue a reboot command) as opposed to logging systemd output?
Thank you,
Last edited by j0tev (2013-02-18 17:08:58)Think I found the problem:
Feb 09 14:31:45 wikiclone sshd[216]: Received signal 15; terminating.
Feb 09 14:31:45 wikiclone systemd[1]: Stopped Apache Web Server.
Feb 09 14:31:45 wikiclone systemd[1]: Stopping Remote File Systems.
Feb 09 14:31:45 wikiclone systemd[1]: Stopped target Remote File Systems.
Feb 09 14:31:45 wikiclone systemd[1]: Stopping Network.
Feb 09 14:31:45 wikiclone systemd[1]: Stopped target Network.
Feb 09 14:31:45 wikiclone systemd[1]: Stopping dhcpcd on eth0...
Feb 09 14:31:45 wikiclone dhcpcd[525]: sending signal 15 to pid 312
Feb 09 14:31:45 wikiclone dhcpcd[525]: waiting for pid 312 to exit
Feb 09 14:31:45 wikiclone dhcpcd[312]: received SIGTERM, stopping
Feb 09 14:31:45 wikiclone dhcpcd[312]: eth0: removing interface
Feb 09 14:31:45 wikiclone dhcpcd[525]: dhcpcd[525]: sending signal 15 to pid 312
Feb 09 14:31:45 wikiclone dhcpcd[525]: dhcpcd[525]: waiting for pid 312 to exit
Feb 09 14:31:45 wikiclone systemd[1]: [email protected]: main process exited, code=exited, status=1/FAILURE
Feb 09 14:31:45 wikiclone systemd[1]: Stopped dhcpcd on eth0.
I am marking this as solved for now - while my issue is yet unresolved at least I now know what is causing the shutdown problem. Hadrons, thank you for your noob-friendly suggestion!
Cheers
Last edited by j0tev (2013-02-15 17:22:29) -
ITunes takes a long time to open, or doesn't open at all.
I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.
.
-
Firefox doesn't work correctly with Office Live and Hotmail.
I have recently installed a Office Live update. When i click on a file to edit I get amessage popup saying "To complete installation of the Office Live Update, close all browser windows and then open your browser again." I have done this several times but it does not make any difference. I have tried to do the same in IE and it works fine, but I really don't want to go back to using IE. What is the problem and how do I fix it? I also have difficulty in Firefox when using the "reply" function in Hotmail. The message body i'm replying to disappears, but this works okay in IE too. Is this Microsoft's way of making people go back to using IE by putting bugs in their systems so microsoft related products/websites won't work in Firefox?
== URL of affected sites ==
http://www.hotmail.com and http://www.officelive.comditto
-
SilverKeeper backup doesn't work correctly with Intel iMac and 10.4.8
I use SilverKeeper 1.1.4 to backup daily to a LaCie drive. But it will no longer do automatic backups (that is, wake computer from sleep at 6am before I start the day) since I migrated from PowerBook G4 to new Intel iMac 24". It only starts the backup when I come and wake computer, not by itself, which it had done before...The SilverKeeper people have been unable to help me.
New Intel iMac 24" Mac OS X (10.4.8)Could very well be that SilverKeeper's scheduling function no longer works with 10.4.8. Let me suggest alternatives that do:
1. Deja Vu
2. Synk (Backup, Standard, or Pro)
3. Synchronize! Pro X
All are universal binaries. You can find them at www.versiontracker.com or www.macupdate.com. -
Using Table.Join formula takes extremly long time to get results.(Why Query Folding doesn't work?)
Hi,
I built a query with 4 tables inside (load from Oracle DB and two of them are quite big, more than millions of rows). After filtering, I tried to build relationships between tables using Table.Join formula. However, the process took extremly long time to
bring out results (I ended the process after 15 mins' processing). There's a status bar kept updating while the query was processing, which is showed as . I suppose
this is because the query folding didn't working, so PQ had to load all the data to local memory first then do the opertion, instead of doing all the work on the source system side. Am I right? If yes, is there any ways to solve this issue?
Thanks.
Regards,
QilongHi Curt,
Here's the query that I'm refering,
let
Source = Oracle.Database("reporting"),
AOLOT_HISTS = Source{[Schema="GEN",Item="MVIEW$_AOLOT_HISTS"]}[Data],
WORK_WEEK = Source{[Schema="GEN",Item="WORK_WEEK"]}[Data],
DEVICES = Source{[Schema="GEN",Item="MVIEW$_DEVICES"]}[Data],
AO_LOTS = Source{[Schema="GEN",Item="MVIEW$_AO_LOTS"]}[Data],
Filter_WorkWeek = Table.SelectRows(WORK_WEEK, each ([WRWK_YEAR] = 2015) and (([WORK_WEEK] = 1) or ([WORK_WEEK] = 2) or ([WORK_WEEK] = 3))),
Filter_AlotHists = Table.SelectRows(AOLOT_HISTS, each ([STEP_NAME] = "BAKE" or [STEP_NAME] = "COLD TEST-IFLEX" or [STEP_NAME] = "COLD TEST-MFLEX") and ([OUT_QUANTITY] <> 0)),
#"Added Custom" = Table.AddColumn(Filter_AlotHists, "Custom", each Table.SelectRows(Filter_WorkWeek, (table2Row) => [PROCESS_END_TIME] >= table2Row[WRWK_START_DATE] and [PROCESS_END_TIME] <= table2Row[WRWK_END_DATE])),
#"Expand Custom" = Table.ExpandTableColumn(#"Added Custom", "Custom", {"WRWK_YEAR", "WORK_WEEK", "WRWK_START_DATE", "WRWK_END_DATE"}, {"WRWK_YEAR", "WORK_WEEK",
"WRWK_START_DATE", "WRWK_END_DATE"}),
Filter_AolotHists_byWeek = Table.SelectRows(#"Expand Custom", each ([WORK_WEEK] <> null)),
SelectColumns_AolotHists = Table.SelectColumns(Filter_AolotHists_byWeek,{"ALOT_NUMBER", "STEP_NAME", "PROCESS_START_TIME", "PROCESS_END_TIME", "START_QUANTITY", "OUT_QUANTITY", "REJECT_QUANTITY",
"WRWK_FISCAL_YEAR", "WRWK_WORK_WEEK_NO"}),
Filter_Devices= Table.SelectRows(DEVICES, each ([DEPARTMENT] = "TEST1")),
SelectColumns_Devices = Table.SelectColumns(Filter_Devices,{"DEVC_NUMBER", "PCKG_CODE"}),
Filter_AoLots = Table.SelectRows(AO_LOTS, each Text.Contains([DEVC_NUMBER], "MC09XS3400AFK") or Text.Contains([DEVC_NUMBER], "MC09XS3400AFKR2") or Text.Contains([DEVC_NUMBER], "MC10XS3412CHFK") or Text.Contains([DEVC_NUMBER],
"MC10XS3412CHFKR2")),
SelectColumns_AoLots = Table.SelectColumns(Filter_AoLots,{"ALOT_NUMBER", "DEVC_NUMBER", "TRACECODE", "WAFERLOTNUMBER"}),
TableJoin = Table.Join(SelectColumns_AolotHists, "ALOT_NUMBER", Table.PrefixColumns(SelectColumns_AoLots, "AoLots"), "AoLots.ALOT_NUMBER"),
TableJoin1 = Table.Join(TableJoin, "AoLots.DEVC_NUMBER", Table.PrefixColumns(SelectColumns_Devices, "Devices"), "Devices.DEVC_NUMBER")
in
TableJoin1
Could you please give me some hints why it needs so long to process?
Thanks. -
I want to do a border-radius with box shadow and it doesn't work, why?
This should be simple but it's not working and I don't know why. I think the problem is in the html.
I simply want to have a div with an image inside that is circular and has an inset shadow and is centered on the page.
/*here is my css*/
#div3 {
-webkit-margin:25px auto;
-webkit-border-radius:50%;
.box-shad{
-webkit-box-shadow: 15px 15px 15px #8 inset;
<!-- here is my html -->
<body>
<div class="gridContainer clearfix">
<div id="div3" class="fluid"><div class="box-shad"><a href="index.html"><img src="images/Big-tree-trans1.png" width="900" height="700" alt=""/></a></div>
</div>
</body>
Here is my website: www.adjacentdimensionsmedia.comI want a different drop shadowed image on each page. Is there a way to do that?
Sure. Copy & paste the following code into a new, blank document.
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Document</title>
<style>
margin: 0;
padding: 0;
-moz-box-sizing: border-box;
-webkit-box-sizing: border-box;
box-sizing: border-box;
img {
max-width: 100%;
vertical-align: baseline
body { background: #069 }
header, footer {
clear: both;
width: 100%;
padding: 0 2%;
background: #CCC;
color: #000;
min-height: 50px
article {
clear: both;
width: 75%;
min-height: 600px;
padding: 0 2%;
background: #FFF;
color: #069;
margin: 0 auto;
.shadow img { box-shadow: 1px 3px 5px #333 }
.radius img {
-moz-border-radius: 10px;
-webkit-border-radius: 10px;
border-radius: 10px;
.border img { border: 20px solid #069 }
.center {
text-align: center;
margin: 0 auto
</style>
</head>
<body>
<header>Header</header>
<article> <h1>Main content area</h1>
<div class="shadow radius border center">
<!--INSERT YOUR UNIQUE IMAGE BELOW-->
<img src="http://placehold.it/500x325.jpg"> </div>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
<p> </p>
<h3>Heading 3</h3>
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Mauris vitae libero lacus, vel hendrerit nisi! Maecenas quis velit nisl, volutpat viverra felis. Vestibulum luctus mauris sed sem dapibus luctus. Pellentesque aliquet aliquet ligula, et sagittis justo auctor varius. Quisque varius scelerisque nunc eget rhoncus. Aenean tristique enim ut ante dignissim. </p>
</article>
<footer>Footer</footer>
</body>
</html>
Nancy O. -
I never had this problem with my 4S — I can't fix the individual mailboxes under Settings > Mail > *My Email* > Advanced anymore like I used to either.
Does anyone have any idea?
Currently set to Fetch across all emails.I think that Hotmail is a POP account so e-mails read on one phone will still look unread on another.
Check you e-mail account settings and see if it says it's an IMAP account.
If so, an e-mail read on one phone will show as read straight away on another.
To test the theory, just send a few e-mails and agree with your wife who will read which ones, then check them to see if the theory is correct -
My Safari 3 Beta (S3b) doesn't retain any settings... homepage, window size, bookmarks, tab settings (anything in the preferences for that matter) when I close and reopen S3b. I posted a bug report, but anyone have any ideas here?
Joe Mac
WinXP SP2fairly experimental advice, since i've only had the puppy installed on belladonna for a few ... hours, it would be still ...
... but let's check to see if this is an issue with damaged preference files.
Quit Safari.
in XP, the Safari preference files live in the following two locations:
C:\Documents and Settings\username\Application Data\Apple Computer\Safari
C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\Safari
You might have to turn on "Show hidden files and folders" to find the preference folders (Application Data and Local Settings are "hidden" folders). Right-click "My Computer", select "Open", go "Tools > Folder Options". Click the "View" tab. The "Show hidden files and folders" radio button is in the center scrolling panel.
("username" here is the name of the user account on the PC that you're getting this problem in. for example, on belladonna "username" = "owner".)
drag those two folders to the desktop, and then try launching Safari again. (that should rebuild your preference folders.)
do changes to your preferences "stick" now, with fresh preference folders in place? -
Mail doesn't send mails with attachments 1Mb
Hi,
I'm using Mail with a ManagedExchange account. Before Snow Leopard I was using Entourage 2008.
Everything seems to work fine. Except sending of larger files fails.
Every time I send a mail which is approx. <1Mb Mail starts transmitting data (see it via Little Snitch 2.2b) and stops after a while doing nothing anymore. The mail stays in the outbox, and the moving circle which indicates that a folder is being synchronized appears endless. No other mails are going out then. After a while I get a message that my email couldn't be sent via my mail server. And the connection failed. And I can choose another mail server if I would have any. Entourage doesn't have that problems. So the connection seems to be fine. Small attachments are no problem.
What's the problem?
Regards,
OberMuftiI'm getting a similar problem. Snow Leopard Mail for me seems to be choking on large attachments - sending them, forwarding them, or even moving them from one IMAP folder to another.
My mails are getting through, but it takes a long time and they are dragging the whole system to a crawl in the process.
Maybe you are looking for
-
Hi, has anyone have the problem that you haven't done anything with you macbook pro but its operating system is running in dos environment?
-
I've been importing mini DVs to iMovie '09 via firewire on my MacBook Pro. The quality is really terrible though it plays back fine through the camera. I'm wondering if anyone has a solution to this. I've read some suggestions to get Final Cut and
-
How can I offer individual password protected pdfs on my site.
I am building a site for a client of mine. His business is a music talent agency. He would like that on the page of the individual artist, there be a link to download a pdf that only that artist can download if he/she enters a correct password. I
-
In other words, the permanent bar across the bottom with Safari, Mail, Pictures and iTunes no longer shows up ... any ideas of how to return it? I've rebooted and still doesn't work. Thanks!
-
Where I can find test application for cluster
Hello, I need a simple test application that can show as loadbalancer and weblogic cluster work together. We I can find it?