At start up, after the password login, it changes to a different start up and freezes.
I have an HP Pavilion a6712f. When I start it up the screen is black and white. I return on the start Windows in normal mode. Then my password screen comes up. I type in the pass word and it says welcome. Then it says it is setting up a new login. This login, no matter what I try freezes eventually. I ran diagnostics. I found an error code BIOHD-1, but everything is conected properly. I haven't added any hardware recently. The smart short self test fails and the surface scan test fails. I don't think it is the hard drive though. It also tells me I have no previous start up points to recover, which is not possible, I set start up points at least once each week.
Why don't you think it is the hard drive?
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.
Similar Messages
-
Why my home wifi connection ipad2 enter the password after the password has been wrong? Password is the phone able to connect after the connection is ipad2 has been an error?
Hello joe2616,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your Wi-Fi network is dropping, please follow the directions outlined below.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.
If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved. -
I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
ThankyouIf you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support. -
I changed the password to my ipod but it isn't working and I don't want to restore it. Is there a way of getting rid of the pass word or un-disabling my device?????
Connect the iOS device to your computer and try to make a backup.
iOS: How to back up
Then restore via iTunes. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
i need to change my rescue email,but i forgot the password to that email,what will i do?and i have 25 ueros on this apple account so i dont want to make a new one!
Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them. -
After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.
Have you tried to reboot your phone(hold home and lock button simutainiously)?
-
After the upgrade to 10.10.3 Foto doesn't run and call the error of the plugin PhotoFoundation
after the upgrade to 10.10.3 Foto doesn't run and call the error of the plugin PhotoFoundation
Try opening iTunes while holding down the option key. When you get a dialog box with "create a new library" or "choose a library", select the choose option and navigate to the library on your external HD.
BTW: If your external HD is not powered on and mounted before opening itunes, iTunes will create a new blank library. -
After the latest version of Adobe flash player was installed, movies and tv shows will not play, and
After the latest version of Adobe Flash Player was installed, movies and tv shows will not run, and most of the news videos will not play. I've tried uninstalling and reinstalling it but that does not help.
I have windows (crap) seven and internet explorer. When I try to access movies or tv shows, I'm always asked to install the latest version of Adobe Flash Player. When I check the programs list, it indicates that Adobe Flash Player Active X is installed. I have uninstalled adobe and reinstalled it several times. Do you suppose this is a virus, and I need to redo the hard drive completely?
-
My ipad 4 wif is ocked as my daughter locked putting in the password wrong too many times. When I try and do a restore it seems to be doing it until the end and then it say it can't do anything as it's locked, go to itunes to unlock.. It's driving me mental. tried twice now ...
I haven't synced with a password, I don't mind losing all the data I just want to be able to use it again !! I'm not sure what IOS it is, not sure it's the most recent, I have a feeling I'm not on IO7.
Thanks for all your help.Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
I removed the applications of photoshop en lightroom from my computer after the free trial. Now I have a paid contract and I cannot download the apllications. What to do?
Hi, sad isn't it!
Is this a PPC iMac, or an Inel iMac?
If PPC...
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
In fact, it will run on Imtel Macs upto 10.6.8 also. -
I found a remote service running after the 10.10.3 update.
ps -A|grep remote.
And I had remote management turned off in prefs.
I force quit the process with activity monitor.
This looks as if it could be a problem.Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
Its a shame you have to go through what you going through.
Good Luck -
My computer restarts itself to update then when it comes the password has been changed and im locked
my computer restarts itself to update then when it comes the password has been changed and im locked out how do i stop it and fix it
Hi
try to boot in safe mode, and check there if you have any alternate account (administrator ect) where you can gain access to your window and then change password of it.
Hope it helps!
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer**
**Clicking on the Kudos! white star is a nice way to say thank you on any post that helped you or resolved the problem.**
**Selecting "Accept as Solution" for a reply that solves your issue helps others who are searching the web for an answer** -
I just "upgraded" my iPhone with the new software. As a low vision person, your phone was always previously helpful. I now discover that I cannot use the phone easily. The font has been changed to a very narrow typeface and the greyscale has been altered to reduce contrast. The background is now grey as well rather than white. The accessibility options permit only three choices. First, increase type size. With the the low greyscale, thin typeface, increasing type size makes it HARDER to read. There is no option for contrast enhancement. Third, the background switch options suffers from the same deficit as the white background. The third choice is to enhance brightness but without the option to change contrast, this is useless. Am I missing something? Can this be fixed? How? When? Are you planning a similar negative "update"/change to other devices?
I am having the same problem. I have gone through every setting, set the bold font, contrast, larger font....everything I could find in any post to try and help - and between the new color scheme that makes it virtually impossible to use the pictures of my grandchildren as background (the picture colors now become the theme colors - which now match the colors of many of the "flat" icons...) I am finding the phone very difficult to use--espeically things like the calendar which has now become very hard to "see" and use. If I can't revert this thing to iOS6, I may have to get a different phone.
-
My iPhoto starts up and freezes. I have tried rebuilding and using iPhoto Library Manager. I have an iMac running 10.7.3. It was working before recent updates by Apple. How can I troubleshoot?
Thank you. Might be a bit more than 50 but close.
Date/Time: 2012-04-09 12:46:07 -0400
OS Version: 10.7.3 (Build 11D50d)
Architecture: x86_64
Report Version: 9
Command: iPhoto
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Version: 8.1.2 (8.1.2)
Build Version: 8
Project Name: iPhotoProject
Source Version: 4240000
Parent: launchd [142]
PID: 980
Event: hang
Duration: 1.81s
Steps: 19 (100ms sampling interval)
Pageins: 0
Pageouts: 0
Process: iPhoto [980]
Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Architecture: i386
UID: 502
Thread 0x50630
User stack:
19 ??? (in iPhoto) [0x3172]
19 ??? (in iPhoto) [0x124b80]
19 NSApplicationMain + 1054 (in AppKit) [0x9c5eb261]
19 -[NSApplication run] + 911 (in AppKit) [0x9c357675]
19 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113 (in AppKit) [0x9c35b306]
19 _DPSNextEvent + 678 (in AppKit) [0x9c35ba9c]
19 BlockUntilNextEventMatchingListInMode + 88 (in HIToolbox) [0x90129356]
19 ReceiveNextEventCommon + 381 (in HIToolbox) [0x901294e7]
19 RunCurrentEventLoopInMode + 318 (in HIToolbox) [0x9012217f]
19 CFRunLoopRunInMode + 120 (in CoreFoundation) [0x99dce328]
19 CFRunLoopRunSpecific + 332 (in CoreFoundation) [0x99dce47c]
19 __CFRunLoopRun + 1112 (in CoreFoundation) [0x99dcec68]
19 __CFRunLoopDoSources0 + 246 (in CoreFoundation) [0x99da4d96]
19 __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15 (in CoreFoundation) [0x99da53df]
19 __NSThreadPerformPerform + 503 (in Foundation) [0x9ac96e40]
19 -[NSObject performSelector:withObject:] + 65 (in CoreFoundation) [0x99e2dde1]
19 ??? (in iPhoto) [0x50792e]
19 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92 (in Foundation) [0x9ac45012]
19 _CFXNotificationPost + 2776 (in CoreFoundation) [0x99de3a38]
19 ___CFXNotificationPost_block_invoke_1 + 275 (in CoreFoundation) [0x99e18cb3]
19 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49 (in Foundation) [0x9ac59e25]
19 ??? (in iPhoto) [0x5c2a86]
19 -[NSLock lock] + 185 (in Foundation) [0x9ac4c826]
19 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x93b74876]
Kernel stack:
19 hndl_unix_scall + 281 (in mach_kernel) [0xffffff80002d7f39]
19 unix_syscall + 472 (in mach_kernel) [0xffffff80005ca448]
19 psynch_mutexwait + 1403 (in mach_kernel) [0xffffff80005a043b]
19 ksyn_block_thread_locked + 67 (in mach_kernel) [0xffffff800059a7d3]
19 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f39b]
19 thread_continue + 1661 (in mach_kernel) [0xffffff800022f11d]
19 machine_switch_context + 361 (in mach_kernel) [0xffffff80002c0939]
Maybe you are looking for
-
How to de-authorize 1 machine at a time
I know how to de-authorize all 5 machines, but is it possible to only de-authorize one machine at a time?
-
Error while compiling RoboHelp 6
I am recieving an error while I try to compile while using RoboHelp HTML V. 6- this is what I'm doing: Going to Single Source Layouts--> WebHelp (Primary Layout) --> WebHelp General opens, I take default setting, click Next --> take default settings
-
I need some plant maintenance AS-IS document.anybody help me.
i need some plant maintenance AS-IS document.anybody help me.
-
HOW CAN I REMOVE THE MASSAGE ERROR 432110 THAT COMES UP EVERY TIME I DOWNLOAD ITUNES OR IT COMES UP EVERY TIME I OPEN MY ITUNES?
-
USER_EXIT - define actions, when user logs on....
Hello, is there a function module or sth. like this, which is executed, when a user logs on? For example...If a user logs on, a message should appear on his screen, but only on his one. Can I define anywhere what happens, if a user logs on? thx, holg