At switch on it needs a WPA2 and a WPA password every time

Every time I switch on it is not connected to my WiFi and says it needs a WPA2 password which i enter then when I switch on again later it says I need a WPA password which I enter. It's request alternates every time. Very boring!!

    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204

Similar Messages

  • Why is it that I need to put in my id password every time I want to erase a file on my laptop?

    Why am I requested to put my Id password everytime I want to delete a file on my Macbook pro.I think I must have done a change in the setting somewhere. But it was not like that before. Thanks in advance.

    Back up all data before proceeding.
    This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Start up in Recovery mode. When the OS X Utilities screen appears, select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. In that window, type this:
    resetp
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not going to reset a password.
    Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
               ▹ Restart
    from the menu bar.

  • To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?

    To reinstall Acrobat 8 Upgrade I need to present previous versions e.g. 3 and then 4 and then 5 Upgrade every time. Is there no simpler way to validate my ownership?
    I had two laptops stolen and the reinstall is a real pain. This also applies to reformats and changeovers to Windows 7, etcetera.

    Windows 7? Then don't waste your life minutes fumbling with an Acrobat 8 - Windows 7 combination.
    If you are to be using Win 7 you'll need the current release of Acrobat (XI). "X" will function but it is no longer marketed by Adobe.
    Be well...

  • My macbook pro will not shut down. It tells me that safari has cancelled shut down and to quit safari and try again, but every time I try to quit safari it won't let me. I need help...I don't know what to do.

    My macbook pro will not shut down. It tells me that safari has cancelled shut down and to quit safari and try again, but every time I try to quit safari it won't let me. I need help...I don't know what to do.

    Have you tried holding the power button down for several seconds? I would try the force quit as mentioned earlier first, or go to the Activity Monitor in Applications>Utilities and try force quit there.

  • Need to enter WPA key every time i re-connect?

    I have a small network of one wired PC, one wireless PC and a wireless laptop. I messed something up while trying to add our new itouch to the network and now, the laptop is asking for the WPA key every time it re-connects. As of right now, the wired PC is also the only one getting on the internet. We are using the WRT54G v.4, running windows XP on all three computers and i'm about to throw them all out the window. Please help. By the way, the laptop has a different IP address then the other computers...is this a problem too? Thanks in advance.

    All the computers on your network should have different IP addresses, but they should all be on the same subnet 192.168.1.x .  If your computer fails to connect, it may show a 169.254.xxx.xxx address.  This address simply means you failed to connect.  It comes from Windows, not the router.
    First, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
    Also, in the non-working computers, temporarily turn off the software firewall, including Windows Firewall, and see if that helps you make a connection.
    To fix the recurrent WPA key entry problem:
    In the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys".  Also delete any network that you do not recognize, or that you no longer use.  Delete your current network (this will clear any old settings).  Reboot computer.  Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings".  Reboot computer.  Your computer should connect automatically to your router.  If you still have trouble, make sure your computer's software firewall is off.
    If the above does not fix your problem, download and install the latest driver for your wireless card.
    Also, please note that WPA = "WPA with TKIP", and WPA2 = "WPA with AES".
    If you are using WPA2, then note that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=917021 and it will direct you to the patch.
    Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.
    If you need more help, please state the computer software firewall that you are using.

  • HT1597 How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers po

    How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers podcasts as the last step, and at other times randomly, when trying to just add some MP3's to a playlist, for example.  I can't seem to find any other option to uncheck, and can't find an answer from my so-far internet searching.

    erict, you blew me away with that suggestion! It was something so simple I couldnt believe I hadnt thought of it! But in the end it didn't work, which I was really surprised about. On Windows anytime anything was moved itunes was hoplessly lost, but on this mac it still kept up with everything. I tried renaming folders, moving folders, and even renaming moved folders but it still kept trying to import.
    I even went as far as deleting EVERYTHING i had moved to the Mac, which didnt really work. It still kept trying to import what wasnt there which made it continue to freeze up. However, after doing this it, the freezing was not nearly as bad. It gave me enough of a break to cancel it through the itunes dialog box at the top of the app. So in the end, thats all I really needed to do, only before I had deleted everything the freezing would not allow me to do it.
    So now Im reimporting everything again, only slowly, and only a few Artists at a time.

  • I have a new Mac Book Pro with Retina, and Keynote crash almoset every time i use it?

    I have a new Mac Book Pro with Retina, and Keynote crashes almoset every time i use it? I have the newest update.
    Could you please help me? I have a lot of Keynote shows, and I have to use it now!!
    I have saved a crash report, if you need it.

    Apple will not write back to you. Telephone using the Apple Care phone number appropriate for your country and ask for a refund, if that is what you want to do.
    I use Keynote everday, it does exactly what it says it will do,  that is if your NOT using Mountain LIon.
    There are many applications available
    I have used MS PowerPoint professionally for many years on both Windows and Mac, I can assure you it can do everything that Keynote can do and very much more.
    Which software you choose depends on who you are and who you are presenting to.
    for interactive presentations look at:
    PowerPoint
    Adobe Flash
    Adobe Director
    Camtasia
    Dreamweaver (an HTML application)
    for simple photo slide shows:
    iPhoto
    iMovie
    Picasa
    Photomagico
    Adobe Lightroom

  • Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...

    Does anyone know what "video rendering error: -50" means?   I am trying to back up a movie i made on iMovie and get that message every time, about 30 times...   OSX10.9.2, iMovie 10.0.3, Toshiba externals 2TB etc

    Hi Babowa and Apple:
    Thanks for helping me.   Here is my workflow:
    I store any file that I save onto my external drives so that I don't fill up my main hard drive.....( I label each external hard drive by year + alpha, such as 14a, 14b etc.)  Is that a problem?   Any suggestions?
    I know iMovie works from the main iMac HD and therefore needs to find the file that I want in the external drive, such as when I "import" a file from an external such as 14a into iMovie that has been previously downloaded onto the external 14a (I download all SD cards & tapes to externals)......and it sounds like you're saying that is causing iMovie problems because the file is not so easily accessible for iMovie?
    I assume that iMovie processes the file that I have "imported" into an "iMovie Event" on my iMac HD.  I label that version as say "NLGE 3000E" for my 3000th movie, Event version, "events" that is always rough.
    After I have imported media as an event and have labeled an event, "NLGE 3000E,"  then I go to "new movie" that I assume is a "project".....and I label that version "NLGE 3000P1"...."P" for "project" and "1" for the first edition....also to help me keep track of where my movies go.   I focus on "Projects" then when editing ...and watch which edition I am editing and which edition appears where.
    I learned that I need to "share" all movies from "Projects" to save......and store my final versions on my external drive, 14a (eg) so that I am sure that I have a retrievable copy.   I try to share to YouTube from iMovie and succeeded 1/10 tries.
    Evidently a movie is not saved unless it is in "theater"?
    Please see next "reply" for other comments about retrieval.
    Thanks.

  • TS3694 Error 3014 when trying to load ios6. I have cleared 2.5GB on the phone as it seems you need that ridiculous amount of space. Every time it just gives me 3014 error code within a minute of trying to download? Any help?

    Error 3014 when trying to load ios6. I have cleared 2.5GB on the phone (4s) as it seems you need that ridiculous amount of space. Every time it just gives me 3014 error code within a minute of trying to download? Any help?

    All,
    I thought it may be related to spaces in the path in which the script was called from. I tried having the ODBC command script in another directory but the same thing happens. It will give me the "CONFIGSYSDSN: Unable to create a data source for the 'Oracle in OraClient10g_home1' driver: Could not load the setup or translator library with error code -2147467259". As soon as the script is done running I can manually double click the script and it adds the DSN fine.
    Thanks,
    Clif Bridegum

  • TS1398 I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?

    you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.

  • HT201365 Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

    Now that I have upgraded to iOS 7, how can I make it so that I don't need a password every time I use my iPad?

    In v6 airport utility "Join a wireless network" is not available once the TC is setup.
    You must reset to factory and try again using the selection options.. and it can fail or not come up.. This is an extremely poor way to setup a TC.. and you should NEVER EVER DO IT.. that is why apple removed it. Since you are joining wireless it makes no difference where the TC is located.. since it would become a dumb AP and turn off its ethernet ports.
    Place it right next to your main modem router, plug in by ethernet, and select bridge mode and create a wireless network. Never use Join a wireless network..
    However for completeness here is the method.
    How do I setup my time capsule with wireless internet?
    Never ever do it.
    If you need internet by wireless and backup to the TC.. then simply plug the TC directly into the Mac.
    Run dual network.. Setup explained here.
    Using Time Capsule hardwired to Mac for back-up only.

  • TS1398 My new iPad keeps forgetting my Internet password every time it is switched off or goes on flight mode

    My new iPad keeps forgetting my Internet password every time it is switched off or goes on flight mode. Have tried resetting the network setting as it suggest on the support page. The Internet  works fine with my windows PC and my son's iPad 2. Any advice?

    Have you tried powering off and then back on your router?
    Does it only happen with your router? If so that would tend to indicate a router problem.

  • HT5312 i knew my password ID put i forgot my security question and its ask me every time about it :(

    i knew my password ID put i forgot my security question and its ask me every time about it

    Follow the instructions on the page that you posted from, they should let you reset them i.e. if you have a rescue email address set up on your account then steps 1 to 5 half-way down that page should let you reset them.
    If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

  • I have Adobe Photoshop CS2 and it closes down every time I open it.

    I have Adobe Photoshop CS2 and it closes down every time I open it with the following error: "Photoshop Quit Unexpectedly". Is there anything I can do to troubleshoot this?

    The first question is have you used this version on this computer with the operating system you have now. The issue might be (if you are on a Mac) that CS2 was a Power PC application and you have upgraded to a new computer with an Intel processor. CS2 will not work on an Intel processor with system (I think) OSX.6 or greater.
    If you have used this release on this computer with the same OS, than try deleting the preferences by holding down the Comand/Control-Option-Shift keys when starting the application. You will get a message asking if you want to delete the preferences, say yes.
    Let me know if any of these work.

  • Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

    Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?

    I would say to start by looking on their web site... unfortunately, that appears to be dead.
    Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well.

Maybe you are looking for