AT&T after unlocking process and Authorized iPhone Unlock

Before two days 8 April I called AT&T and gave him IMEI then I received email that my phone is unlocked.
and need to Completing my Authorized iPhone Unlock
Thank you for contacting AT&T Customer Care about unlocking your iPhone. We have reviewed your request and confirmed that you are eligible to have the requested iPhone unlocked. To complete the unlock, simply:
1. Open iTunes on your Mac or PC and verify that you have internet connectivity.
2. Connect your iPhone using the dock connector to USB cable that came with your iPhone.
3. Backup and restore your iPhone using iTunes . For information on backup and restore, please visit http://support.apple.com/kb/HT1414
4. After restoring, your iPhone will be unlocked. Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
For questions regarding AT&T’s wireless service and iPhone, please visit the Phone/Device Learning Center. We thank you for your continued business and look forward to providing you with the best customer service.
I did all those steps and restore my IPhone to IOS 5.1 and updated my ITunes since two days after that I get only this message :
Only commpatible SIM cards from a supported Carrier may be used to activate iPhone
Can you help me please and ?!
My IMEI availble upon request to check in Database if has unlocked
Regards,

"Only commpatible SIM cards from a supported Carrier may be used to activate iPhone"
So, which SIM are you using? If you are using an incompatible SIM, how do you know if your iPhone was not unlocked?

Similar Messages

After erase data and setting, iphone 3g wont turn on

after erase data and setting, iphone 3g wont turn on. pls help

1. Have you tried plugging it into your computer?
2. Do you have the most updated version of iTunes?
3. Did you try a 'hard' restore. Press home and sleep button at the same time until the Apple logo comes up.

After iTunes update and the iPhone Synch - No video on my iPhone

My iTunes does not show any catagory for video either. I just saw a lot of "Other" with a different color on my space bar. How do I get my PURCHASED video's - TV shows and movies back?

One thing that might help out.
If the iphone does not recognize the video on the iphone any more, you can try a reset or restore if necessary. However, to get your video back, once you cleared out "other" just sync the video back from itunes.
Here are a couple of articles from the apple support website that might help out.
http://support.apple.com/kb/HT1737
http://support.apple.com/kb/HT1414
http://support.apple.com/kb/TS1275
You might need to reset and or restore the iphone to resolve any software issues.
Hope this helps.

I deauthorized my computer and then authorized it again on iTunes because itunes kept telling me to authorize my computer, even though it was already authorized. Now, after deauthorizing it and authorizing it again, it still constantly says i need to.

Please help me! A lot of my songs that I bought I can't play and it's probably because my computer is being weird. Please give as much feedback as possible; I need to resolve this issue ASAP! Thanks!

I don't understand what these prompts mean such as the first one, what is an adminastratior account?
Authorize your purchases from an administrator account
I don't think it's happening because I'm using the incorrect account name but my friend did authorize my computer with her dad's apple ID and everytime itunes asks me to authorize it, in the apple ID box his apple ID is already there in advance so I have to delete his and put mine in. Authorize using the correct account name
I am not really a computer savy person so I'm not sure if I have either Windows Vista or Windows 7. I think I have some sort of form of Windows. Are the user Account controls you're talking about on your itunes account or are they on your computer, involving Windows?
Turn Off User Account Controls (Windows Vista and Windows 7 Only)
Remove the SC Info folder
What is an SC Info Folder? How do you remove it?

How can I navigate to a new page when after-submit process running proc

I have a long running procedure and would like to provide the users with an animated gif to indicate progress that updates a description line to indicate the current step in the process.
Currently I have a couple pages in this application in which a stored procedure in a package is called which performs a long-running process which updates progress in a table. These processes have a single parameter argument. In these cases I call the procedure via the Job Scheduler as part of my After-Submit process and the page navigation jumps to another page which shows a graphical representation of % complete based on the progress updates in the table and refreshes itself every 5 seconds until the job is complete. This works fine.
I am now running into an issue where I have a more complex set of processes, with a number of parameters. To resolve this I used the same process as above, however, I first check to see if the process exists in the Job Scheduler, if not I create it. I then set all of the parameters and tell the job scheduler to execute the procedure. This should work similar to the process I am running on the other pages, however, in this page where I have multiple parameters and send an execute command rather than an execute immediate on job creation, the system runs the entire job prior to running the page branch, as a result the end user is stuck on a hanging page with no user feedback for two minutes after pressing submit.
I am looking for how to call the procedure and have the branch execute so a progress screen can be viewed. I am not committed to the use of the job scheduler if there is a better way.
Any help is greatly appreciated.

The process involves
(1) a detail table filled with phone usage data, approximately 175,000 records per month.
(2) a table that stores what various combinations of codes in the detail table translate to for types of calls or data transmissions
(3) a summary table for the months calls and billing
(4) the E-Business Suite.
(5) A GTT for temporary crossreference storage
(6) A GTT for reporting data
I have a parameter page where the user selects what data they are looking for and then submits it to generate the report.
The generation of data is a four step process.
(A) Retrieve the Code Combination ID's for the phone usage specified in the parameters from the summary billing table(1) into a GTT(5)
(B) Query the department and Account Code Block Details from E-Business Suite(3) (using dblink) for the CCID's in step one and add to the GTT(5)
(C) Run a query which uses the detail table(1), a function against the crossref table(2), and the crossreference GTT(5) to create the output in the report GTT(6)
(D) An ApEx page process that counts the output and returns to a page without Export to Excel for over 65000 records or with Export for under.
The parameter page is an ApEx page with some text fields, a couple date fields, and some checkboxes. An after submit process calls a packaged procedure which calls separate procedures for (A), (B), and (C), the page then branches to a page that shows an animated gif and current step of the process {this is what is not working right now}. Once the task completes this page branches as per (D) to a page that shows all the contents of the GTT report(6).
The process works successfully with the exception that instead of going to a page to show the process the system simply hangs on the parameter page after the submit is pressed until the processing is done and then goes to the processing page just long enough to branch to the report page.
I am beginning to think that I should alter the design to not use the GTT, but include the username as a field in the output table with a binary index on it for speed so that I can use the job scheduler to run a separate session and hence enable the processing page. The processing page is important as the query can take anywhere from 2 minutes to 2 hours to generate the report depending upon the parameters.

HT201407 Per the "Completing Authorized iPhone Unlock" instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate.

Received an authorized unlock code from apple/AT&T for my off-contract 3GS (8GB). Per the “Completing Authorized iPhone Unlock” instructions, I connected to iTunes to back up and restore so my iPhone can be unlocked! But after the restore my iPhone is stuck at the activation screen, it will not activate saying “Your iPhone cannot be activated because the activation server is temporarily unavailable”. I tried this again and again for countless times, no way! I have my old AT&T simcard and other carrier’s simcard. Both will not help. Please help me to activate and start using my phone.

Hello,
I got like the same problem, last days I get message to restore my iPhone, so I did it yesterday and it work very well. In the afternoon I saw that at top in the left corner show invaild sim card or so (only knew the german version). so I restore it again but now it won`t activate after I enter SIM-PIN and it accept it, it shows "No Service".
Anybody can help? My Carrier is o2 Germany.
Thanks!

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

HT201328 after unlocking from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this . Any ideas?? TKS Sandro

after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro

“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty

Am facing issue on my iphone 5s after updating to ios 7.1.1, every while the phone hang after lock it and cannot unlock and even cannot turn on the screen this is so annoying, kindly advice if i have to go back to the store as device still under warranty, and if its a hardware issue or software ??

Hello HaithamOkeely,
We've an article that provides the following troubleshooting steps that may help stabilize your iPhone.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

How can i avtive my iphone 4s after unlocked by carrier?i got the message my request couldnt be process,try later

how can i avtive my iphone 4s after unlocked by carrier?i got the message when i connect it to itunes:'
Your request couldn’t be processed.
We’re sorry, but there was an error processing your request. Please try again later.
imei number 012937001431948

iOS: Resolving activation messages
try to follow this

There were no results for If i buy locked iphone 5s( verizon) from usa can i use it in india ..and when i buy this ph is this mandatory that i have to choose the carrier plan....and one more qs after unlocking still the warenty is valid..plzz tell me offi

There were no results for If i buy locked iphone 5s( verizon) from usa can i use it in india ..and when i buy this ph is this mandatory that i have to choose the carrier plan....and one more qs after unlocking still the warenty is valid..plzz tell me officialy unlocking procidure in details...thank you..in advance...

Your question has been answered. Jailbreaking cannot be discussed here. If you buy a phone locked to a carrier, it would be down to them to unlock it, and that's very unlikely if you've only just got the phone. Locked phones are "cheap" for a reason - you're signing up for a contract and that subsidises the cost of the phone.

HT201328 I am trying to unlock my old iphone after we got a new iphone 5s yerterday. I sent the request to at&t and I have the unlock instructions but keep getting a message on itunes when I try to do the restore...

I have been trying to unlock my iphone 4s after we bought a new iphone 5s last night. I sent the request to At&T and receieved the instructions on how to unlock the old phone but I keep getting an error message when I try to do the restore.

You might want to state what the error message says....

I reset my iPhone 3gs by erase all data and settings. After the process i was waiting till morning but its still shows the apple logo.its been 8 hours but i don't know what to do? please help me to fix it.

i reset my iPhone 3gs by erase all data and settings. After the process i was waiting till morning but its still shows the apple logo.its been 8 hours but i don't know what to do? please help me to fix it.

Something has gone wrong. Force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808

Can i lock mi iphone by imei and after unlock if i find it

can i lock my iphone by imei end after unlock if i find it

You cannot lock your iphone by imei at all, unless this is something your carrier offers.

After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How

After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one, When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine. How do I correct this. I am using Windows 8.1 . My wife has never had an iTuunes account

Hello Lakesidetom,
It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
How to find your Apple ID - Apple Support
Use these steps if you forgot your Apple ID or aren't sure that you have one.
Apple - My Apple ID
If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

AT&T after unlocking process and Authorized iPhone Unlock

Similar Messages

Maybe you are looking for