At&t messed up with my upgrades and now tells me I can have an Android

At&t messed up with my upgrades, I had one available but now they made it 21 months instead of the 12 months upgrade option I had.
I then discussed this with the office of the President of At&t and they told me I could have a discounted Android phone now or wait till late 2011 for an upgrade to Iphone 4, we have a 3g ( the one we need to upgrade) and a 3gs along with 2 other lines ( 4 in total) We spend over 200 USD a month on service.
I was told we do not spend enough money and that Apple is the reason we cannot upgrade!
So we can switch to Android and ditch Iphone or have crappy service with the old 3g.
Can Apple help us? I do not believe At&t, we have been customers of theirs since 2008.
Apple is the reason we can have a Android but not an Iphone?

This a an Apple USER forum. This is not Apple. I suggest you either visit an AT&T store. Apple cannot help you with your service from AT&T.
I suspect there might be some miscommunication going on between you and AT&T.
If you have an iPhone AT&T account with data service on 2 iPhones it should be obvious to see that there has been some mistake, if true. You might be able to upgrade your iPhone accounts. When did you initiate service on these 2 iPhones? If it is less than 2 years, then you cannot upgrade them. AT&T might consider some sort of a partially upgraded iPhone after 18 months though.
If your iPhone accounts are not eligible for an upgrade AND one of the other two lines were eligible for an upgrade, then AT&T might have offered you an upgrade on these phone lines i.e. to Android. Therefore you might have misunderstood them.
On all your phone lines, you are not allowed a subsidized upgrade until you complete the 24 months of service on the line and phone you are attempting to upgrade. You can "upgrade" one line that is eligible and use the new phone on another line though.

Similar Messages

  • I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7.  I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade.  The installation goes smoothly until I

    I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7.  I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade.  The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen.  I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine.  Any thoughts on how to get this working?  Thanks

    If your goal is to install and activate CS5 there is no need to install anything preceding it.  You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

  • I am running osx version 10.6.8 with safari 5.0.5.  recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in.  how in the world do i combat this issue?  thank you!

    I am running OS X, version 10.6.8 with safari 5.0.5.  recently i ran one of those recommended upgrades and now Safari continually quits citing .WinASOEasyTweakVKey.Gen.tmp plug-in.  how in the world do i combat this issue?  thank you!  I have reset Safari several times.
    Another new problem is Firefox telling me, when the e-mail window is open, that the window must run in 32 bit.  The window is then disabled and then i have to restart Firefox.
    Thank You for any help/hope you can give me with these issues.  deborah

    You’ve been infected with the “Flashback” malware. See this Apple support document:
    About Flashback malware
    Back up all data, if you haven't already done so.
    From the menu bar, select
     ▹ Software Update
    to install the latest Java update, as well as any other available updates. That should clear the infection in most cases. You must update to the latest version of OS X 10.6 or 10.7 before you can install the Java update.
    The removal tool runs automatically in the background and is then deleted. Don’t look for something to click. If the malware is removed, you’ll be notified.
    After you’ve secured your system — not before — change every Internet password you have, starting with banking passwords, and check all financial accounts for unauthorized transactions.

  • I have upgraded my laptop with Adobe X1 and now all PDF's will only open as en ecyrpted word doc, pl

    I have upgraded my laptop with Adobe X1 and now all my existing savedPDF documents will only open as an encryted word document, HELP! Please!

    Hi Juliea,
    I think the file association for PDF is not correct. Instead of double clicking the file to open, Please try below mentioned
    right click on the file and select open with..
    Select Choose Default Program
    Select Adobe Reader from the list(If it is not in the list then navigate C:\Program Files (x86)\Adobe\Reader 10.0\Reader and select AcroRd32.exe)
    Remember to select the check box"Always use the selected program to open this kind of file"
    Click ok
    ~Pranav

  • I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    I messed up badly by trying to restore my brand new macbook pro by doing restart then command R and choose disc utility repair now when I start ,all I get is the white screen with a folder and a question mark,What can I do???help please

    Can you still boot to the Recovery partition using Command and R whilst booting? Or did you wipe the Recovery partition as well?
    If your Recovery partition is still intact, you can simply boot to it and reinstall the OS via the Internet. If you wiped the Recovery partition, you can hold down Command, option and R keys whilst booting and boot into true Internet Recovery mode. You'll be able to reformat the hard drive, erasing all partitions (format it as "Mac OS Extended (Journaled)" with a dingle GUID partition) and then reinstall the OS that shipped with your machine.
    Note that you should use a physical Ethernet connection when restoring over the Internet - it's three times slower if you use wifi.
    Try your Recovery partition first and if that doesn't work, use Internet Recovery.
    Clinton

  • I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    Visit HP's support site to see about downloading an updated driver. Or you can check at support.apple.com/downloads/ for new HP printer drivers package.

  • I was messing around with my iPad and put in a in app purchese and forgot the pass code help!

    I was messing around with my iPad and put in a in app purchese and forgot the pass code help!

    Do you mean you forgot the passcode for your iPad?  If so you need to restore it through the recovery mode described in http://support.apple.com/kb/HT1808

  • Does acrobat pro 9 work with microsoft office 2013? Just upgraded and now Acrobat does not seem to "see" my documents

    does acrobat pro 9 work with microsoft office 2013? Just upgraded and now Acrobat does not seem to "see" my documents

    uninstall.
    run the cleaner, http://labs.adobe.com/downloads/acrobatcleaner.html
    restart your computer.
    right click the setup file and click "run as administrator".

  • HT1338 problems with OS X Lion. I upgraded and now my macbook pro has been crashing...

    I am having problems with OS X Lion. I upgraded and now my macbook pro has been crashing... what's going on? and someone please help !!!!

    If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select  
    View ▹ Show Log List   from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • I have recently installed Mavericks and since then I have been unable to shut down or log out of my mac.  I work with two screens and now I seem to have programmes at the top of both screens which I didn't before.  any advice?

    I have recently installed Mavericks on my desk top and since then I have been unable to switch off my computer without crashing it. I work with two screen and now I seem to have the menu bar on the second screen as well which I did not have before.  Can you please help me?

    Dr Bettina, I had similar problems with Mavericks. I installed it on a Mini and a 13" MacBook Pro. I can't speak to your disdplay issues, but I can confirm the inability to logout, shut down, or restarft without a forced, power button shut down. I can also report frequent System Prefs freezes and finder issues, like folder contents taking half a minuite or more to render, or not appearing at all. And while a few Adobe CC apps actually ran faster, InDesign ran like molasses uphill in Decemner.
    I tried uninstalling or disabling numerous 3rd party apps and pref panes. I unplugged everything but the keyboard, ran DiskWarrier, repaired permissions, did fsck -f, trashed various preference files, reinstalled the OS... You name it, and I tried it — short of a potion using eye of newt.
    After two days of totally hosed productivity, I restored OS 10.8.5 on the Mini so I could actually get some work done. However, I've decided to leave Mavericks on the MBP as a sort of crash dummy, and will install and thoroughly test all updates until stability has been achieved. Then — and only then — will I upgrade the Mini to Mavericks, even if it means waiting 'til a .2 or even .3 update.
    Good luck to you...

  • I tried to upgrade and now can't open it because it may be damaged or incomplete

    I followed a prompt to upgrade and now when I try to open with Firefox I get the following message. You cannot open Firefox because it may be damaged or incomplete. My old Firefox remembers userID's and passwords that I need. How can I retrieve this information?

    * Download a new copy of the Firefox program.
    * Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6: http://www.mozilla.com/en-US/firefox/all-older.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Hello alltogether! I use PSE 7 on my PC with windows XP and now want to change to a new Mac with the

    Hello alltogether! I use PSE 7 on my PC with windows XP and now want to change to a new Mac with the newest version PSE . Is it possible to move all my albums and tags to that new version? Thank you very much for your kind answers! Candyapple111

    1. Install PSE 11 in windows, upgrade your catalog, then make a full backup  to a removable drive, like a usb drive, using the organizer's back up command. If you buy the boxed version you get discs for both platforms.
    2. Install PSE on the mac.
    3. Restore the backup to the mac. Point the restore to the .tly file in the folder, not the enclosing folder.

  • I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

    I just did the recent upgrade and now I keep getting an error message when I try to open a book on my Kindle app, I have deregistered the app and reloaded and the same thing happens, does anyone know how to fix?

    You are seeing the message because the new AirPort Extreme has some specific System Requirements:
    http://www.apple.com/airport-extreme/specs/
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    AirPort Utility 5.6.1 in Snow Leopard may or may not work correctly with the new Extreme for all functions. As long as things are working OK for now, you can probably leave them "as is" and wait for another Mavericks update to fix some issues before you "upgrade".
    If you have an iPhone or iPad, you could use that to administer any settings changes on the new Extreme.

  • Uploaded new itunes upgrade and now some music can not be located. a screen appears and says you need to locate the songs in other folders. Any ideas? New upgrade sinks

    Hello
    just did the the new upgrade and now half of my songs are not playing. A screen appears and says you need to search for your music in folders. What the heck happen with this ? Anybody have any issues too?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • My Ipad was upgraded and now when I open a book in Kindle it will not open the book and just takes me back to the opening screen of my IPAD. This happen after a upgrade to some IOS. Help.

    My IPAD was upgraded and now when I open a book in Kindle it will not open and reverts back to opening screen of the IPAD and this occurred after some upgrade with IOS.Help.
    Thanks

    The app may not be iOS6 compatible. Have you tried to reset it? HOld down the sleep and home keys, past when you see the red slider, and unitl you see the silver apple. Let it reboot and see if that helps. If it doesn't, then I'd contact Kindle and see when they're going to update their app or if they even know there's an issue. Unfortunately, the burden is on app developers to be compatible with the operating system, not on the OS to be compatible with millions of apps. So it's up to them.

Maybe you are looking for