AT&T's New Wireless Card

Does anyone know if the new Sierra Wireless card 875 w/3g will work with the Powerbook? All the specs say is compatable with OS 10.4. Thanx in advance for lifting the veil of ignorance

Just an update - decided on the new Sierra Wireless 875U ; this is a USB card - more conveniant and can be used on any computer. Only need to download wireless watcher at SW support http://www.sierrawireless.com/support/att/mac There is also a device dock that one can purchase from the SW online store. Hope this helps.

Similar Messages

  • Installing new wireless card x120e

    I know about the silly whitelist'ing of devices, and I've read about hacking the bios, but is there a universally acceptable way to just turn off the whole whitelist'ing completely?
    I have a full height Intell 5300 card I want to use, then put a new Broadcomm Crystal HD half height card in the original wireless card positition.
    The Intel card doesn't work at all (whitelisted I assume) and I'm not sure if the Broadcomm card will suffer the same fate (arrives tomorrow).
    So is there a supported work around to this terrible vendor locking whitelist?

    From what I understand, no, there is no easy or sanctioned method of installing your choice of mini pci-e cards.  Part of it apparently has to do with EMI validation, and anything outside of what they've tested can't be validated.  What this means for your Broadcomm Crystal HD half height card I have no clue, but outside of looking for a tool to roll your own update to remove the whitelist (or just add your cards to it, I don't know), you'll have to risk a hacked update to get what you want.

  • New wireless card won't work.

    I have an HP Folio 13-1020us, it was suppose to have a intel card in it but it didn't.  So I took out the broadcom it came with and tried to replace it with a Intel Centrino Advanced-N 6235 
    And it wouldn't boot, it said it couldn't recognize the wireless card. Is there anything I can do to get it to work. I upgraded the ssd and memory but the wireless card is a no go. Or do I need a bios update?
     Thanks for some feedback.

    Hi,
    Page #2 of the following manual shows you supported wireless cards:
      http://h10032.www1.hp.com/ctg/Manual/c03177433.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Do I need a new Wireless Card?

    Please bare with me while I tell the whole story...
    Ever since I installed Leopard, my MacBook has been having a big problem. 25% of the time, when you closed the lid, it would crash instead of going to sleep. It seemed to even be getting worse. So last night, when I was leaving an appointment, I closed my MacBook and put it in my bag. I talked to my customer for a few more minutes then I headed home. It was rush hour so it took a while. I stopped at the post office to check my PO BOX, and I had mail yay. When I got home, I looked through the regular mail to see if I had anything. I brought my bag upstairs, checked my email and IM's on my Mac Pro. Finally, about an hour and a half after putting it in the bag, i opened my bag to take out the macbook and plug it in. It was on FIRE. Hotter than it's ever been before. The fans were running full speed, and it was hard to hold. So I turned it off and let it sit for a while. When I turned it back on, my airport card was showing as turned off, and I couldn't turn it back on. Clicking 'turn airport on' wouldn't do anything. I had this happen once before and a few minutes later it came back on. But not this time. A day later, and several restarts and shutdowns later, still nothing. I did to an archive & install, which was something I was planning on doing anyway to try to solve the crash on lid close problem. Oddly enough it doesn't seem to be crashing when I close the lid anymore. So did the archive and install fix the crash problem, and did the crash problem cook my airport card? Or did I have a defective airport card all along and was that causing the crash on close problem? I also ran the Hardware Test several times and it found no problems at all. I'm also 3 months out of warranty. I know where to get a replacement card, they are only about $60, but is there a way for me to verify for sure, that is what the problem is?

    So forget the whole thing.
    I got my airport working again. How? By unchecking "Ask to join new networks". Location by location, unchecking this option would instantly turn AirPort back on. Looks like Leopard still has some bugs to be worked out.

  • Installing new wireless card.

    I have an HP dv7 notebook
    Windows 7 64 bit
    8GB RAM, Intel Core i5
    Bios: HP F.29 11/7/11
    My wifi card died (Intel Centrino N-1000). I bought a new one (Intel Centrino N-6300), but I found out that it is whitelisted in my BIos!!!
    How do I fix this problem?
    I don't care about voiding a warranty... I don't have one!

    Hi,
    Could you tell us what dv7 it is, please? I mean which model like dv7-6543xy.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • MacPro Wireless Card NEW MACPRO 2009

    Does anyone have a pictures of the new Wireless Card inside the new Macpro?
    I see it uses 3 pins instead of the old 2. Well for connecting the wireless card to the wires. Where Can i buy it so i can install it myself?
    Thanks
    Message was edited by: ernie599

    You definitely want to check this out.
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/
    And if you need to buy a wireless card,
    http://store.fastmac.com/productinf...roductsid=207
    (I can't guarantee if this website is good to shop. Are there some folks who purchased items successfully from this site? )
    Message was edited by: GoodmorningNightmare
    Message was edited by: GoodmorningNightmare

  • Recommendations for Wireless Card?

    I am thinking of getting a new wireless card for my laptop because my wireless connection is very weak at home. We all use a router, however my sister in the room next to me has flawless connection on her Windows laptop. It was suggested to me to look into getting a networking card that matches my Linksys router for stronger wireless connection, but I was hoping for some more advice. I do not know where to look first or how to start searching.

    Some WiFi issues are known to be fixed simply by upgrading to 10.4.11. To upgrade to 10.4.11, follow my FAQ*:
    http://www.macmaps.com/upgradefaq.html
    Others may be fixed by following my FAQ*:
    http://www.macmaps.com/WIFI1048.html
    - * Links to my pages may give me compensation.

  • How to get working new WLAN card on my Satellite P105-S6024?

    Welcome
    My laptop is:
    Toshiba Satellite (17 inches)
    P105-S6024
    I had a processor
    Processor
    Intel Core Duo Processor T2050
    (2M Cache, 1.60 GHz, 533 MHz FSB
    The following bios from another laptop that has intel T7400 processor
    Intel Core 2 Duo Processor T7400 (4M Cache, 2.16 GHz, 667 MHz FSB)
    I use the following bios with another laptop
    supports Intel T7400
    bios-20090304153829.ZIP
    http://support1.toshiba-tro.de/tedd-files2/0/bios-20090304153829.ZIP
    Currently I have a wifi card
    actual
    Intel Model: WM3945ABG MOW1
    P / N PA3489U-1mpc
    IC: 248H-DPA3489W
    FCC ID: CJ6UPA3489WL
    Toshiba P / N: G86C0001U910
    Toshiba S / N: WC362560621
    I bought a new wireless card
    Advanced Intel Centrino-N 6200
    Half Size PCI Express Mini Card
    Model: 622ANHMW
    D P / N: 02GGYM REV A00
    CN-02GGYM-70223-03K-02SQ-A00
    I put on and turned on the laptop.
    Unfortunately, only the fan and the screen went black
    Nothing on the screen is not displayed
    Windmill walk
    and DVDRW Drive
    I switch off wifi
    This card is less than half orginalna intel 3945 wifi
    But it came, it includes two cables.
    Does anyone here on the forum to advise me how to change the bios?
    To wifi card intel 6200 go?
    Why not remove the white list?
    Why isolate the pins wifi card?
    Maybe adding a new card to the BIOS?
    Please help
    and thank you in advance
    Ps.
    My laptop is P105-S6024 has a different bios from another model laptop, because I have changed the CPU from Intel in 2050 for just such a T7400.Bios +intel T7400 +intel wireless 6200 would have to be modified for a new card intel 6200th
    Message was edited by: krzysiekrk

    You do not need three anten to N
    I also have a Sony VAIO laptop and there is a wifi card intel 5100 N (for 300Megabit / s) and plugged the two antennas.
    3 if the card has the antenna and the laptop
    is needed to 450Megabit / s
    which is probably wifi intel 5300 and intel 6300 wifi
    For this you need a router 450megabit
    This card Advanced Intel Centrino-N 6200
    which would use the Toshiba P105-S6024 also has 2 entrances to the antenna. The laptop has two antennas.
    The problem lies in the bios toshiba laptop.
    Bios adopt certain cards (so-called white list),
    I must have deleted the bios white list, or to teach a new wifi card intel 6200
    How do I do?
    I'm almost 101% sure that the card must match
    You have to modify the bios

  • Yoga 2 Pro - Wireless Card not Detected by Windows 8.1

    Hi, Just got a refurbished Yoga 2 Pro. The first time I started the system up, the wireless showed up and I connected to my local WLAN. However, few minutes later the wireless dropped out. The issue was that Windows stopped detecting the card. Not showing in the device manager. Strange enough the bluetoth was working fine. The card is an Intel 7260NGW. I thought it was the card, so I replaced it with a new Intel AC7260NGW. The same result. I've removed & reinstalled all drivers including the ones from the Intel website. I've formatted and installed a fresh version of windows 8.1 and reinstalled all drivers again. Not to avail. Now running with an USB wireless adapter.  Any clue what's going on? Thanks in advance guys Daniel

    OMG, I was just about to buy a new wireless card because I have the same problem.
    Some weeks ago my wireless adapter disappeared, the card disappeared altogether even from Device manager, after I installed a new bluetooth driver and after I was connecting to my phone 3G via USB cable.
    But then it came back after I left the laptop shut down and unplugged for a whole night. It worked for a few hours and after closing the lid and opening it again wireless adapter was gone again, never to come back.
    I tried changing drivers, holding the power button for 20 sec to hard reset the laptop, fresh install of Windows, load BIOS defaults, and even installing Windows 10 in VHD (dual boot) and see if it will reappear there.Always the same - the wireless adapter doesn't exist any more.
    However, buetooth has been working without problems, which I find strange.
    I read online about similar situations, and all answers point that the wireless card stopped working and needs to be replaced.
    But @Papelinas - you say you even bought and installed a new wireless card and STILL have the same problem???I can't believe that something in motherboard got damaged and that only wifi doesn't work...
    I've had my Y2P for 6 months, and I don't really have time to send the laptop for repair for some time, I'm using it...
    I guess I'll still try to buy a new card, and just hope the wireless adapter will reappear...

  • Wireless card could not connect after mother replacement

    Hi, 
    I just replace my lenovo T430i motherboard, everything working except Wireless card could not connect to wirelesss network. I take to the shop they replace new wireless card, but it still appear the same problem. Is there anyone having the same problem. 
    Best Regards,
    Bunheng Mom

    Hello bunheng,
    If you could please boot into BIOS at start-up.  On the main page this should show you your system-unit serial number, and the system board serial number. Could you check and make sure both of these fields are occupied.
    One step at a time.
    Hope this helps,
    Alex
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
    What we Do in Life will Echo through Eternity. -Maximus Aurelius

  • MacPro Wireless Card Problems

    Hi:
    I installed a new wireless card in an early 2009 MacPro (2x2.26GHz 2 core w/ 8GB of RAM).
    I've done it before (wires 2 & 3 on the terminals) and the wireless does come up and connects to my router.
    Unfortunately, the whole purpose of the exercise was to be able to create a computer-to-computer local network for iPad content development.
    When I go to create a local network, I don't have any channels and the connection attempt fails.
    Any idea why I don't have channels and how I might get them back?
    Thanks.

    You definitely want to check this out.
    http://meanderingpassage.com/2007/07/18/how-to-installing-an-airport-extreme-car d-in-an-intel-mac-pro/
    And if you need to buy a wireless card,
    http://store.fastmac.com/productinf...roductsid=207
    (I can't guarantee if this website is good to shop. Are there some folks who purchased items successfully from this site? )
    Message was edited by: GoodmorningNightmare
    Message was edited by: GoodmorningNightmare

  • Late 2009 iMac Wireless Card Issues

    I own a late 2009 iMac. I have been having issues with my wireless card for several years now and have been able to make do with our router being in the same room with our computer. We moved recently and now my iMac is not in the same room as the wireless router. Can some please help me fix or confirm if I need a new wireless card?
    My computer shows that there is a wireless card, but the card does not see any networks. I have (on occasion) gotten the card to see the other networks available around us (as well as my own) and to even get it to hook up, but it is short lived. Sometimes the computer locks up altogether.
    Can someone help me determine if this is fixable or if I need to replace the card? If I have to replace the card can I purchase one from Apple and do the install myself?
    Thanks!
    Mike

    BDAqua,
    Sorry, did not even realise that I had not updated the list. I am running the latest version on the iMac which is 10.7.5.... And you could copy and paste the link into your browser...
    Cheers for the response bud...

  • Just got new T530 with wrong wireless card. Which model of Intel 6300?

    Hey all, been surfing the google god for a few days but can't seem to find a secure answer that makes me happy. Just got a new T530 model 2359 laptop for my new job. Other then one stuck pixel that refuses to go away im pretty happy with it as I upgraded the CPU to the i5 3320 cpu model with the nvidia NVS 5400m GPU so it can power dual 24" monitors on my new Lenovo dock. 
    What sucks is that my manager got me the wrong wifi card, the standard thinkpad 1x1 b/g/n wireless card so I can't connect to 5ghz and or dual band routers like I have at my home which I really want for reliable and fast wireless cause I will be using it a lot around my work building as I do IT support for users so I wanna be able to use all the antenna's to help my range.
    I took the laptop apart and I do see a third wire not connected to the thinkpad 1x1 mini card so should be able to use 3 antenna's on my T530?  My big question is which 6300 card would the correct one for my T530? I know apparently there are "white label" cards from IBM that don't work in certain machines but considering I'm putting it into a IBM, I would think I would be ok?
    Also, I do have an HD webcam buit in and I've heard that apparently some Thinkpad models you can't use three antenna and have the webcam working? 
    I'm curious if this white label centrino 6300 is the one I need
    http://www.amazon.com/Wireless-Ultimate-n-6300agn-802-11a-572511-001/dp/B008UOQVYC/ref=sr_1_1?s=elec...
    Or is it this one?
    http://www.amazon.com/Intel-6235AN-HMWWB-Centrino-Advanced-N-Bluetooth/dp/B007QXLIWI/ref=sr_1_3?s=el...
    Thanks for any clarrification on this

    @Fr0stTr0n...
    You may wish to try the P/N that Z and Rich referenced here:
    http://www-304.ibm.com/shop/americas/webapp/wcs/stores/servlet/default/PromotionDisplay?promoName=pa...
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • New driver for Broadcom wireless cards

    Finally there's a driver for Broadcom wireless cards, including 4328 which only worked using ndiswrapper.
    http://www.broadcom.com/support/802.11/linux_sta.php
    There are discussions about it on the Ubuntu forums
    http://ubuntuforums.org/showthread.php?t=914697
    on the Debian forums
    http://forums.debian.net/viewtopic.php? … 294ad5d3e9
    and on the Gentoo wiki
    http://gentoo-wiki.com/HARDWARE_Apple_M … Generation
    Last edited by cmlr (2008-09-25 14:10:13)

    Actually, this driver already has a Wiki page, http://wiki.archlinux.org/index.php/Broadcom_BCM4312.  The new information is that it doesn't just work with bcm4312 cards, but all modern 43xx cards.  See the forum links in the previous message.
    The driver is already available in AUR,
    http://aur.archlinux.org/packages.php?ID=19514
    Last edited by cmlr (2008-09-25 14:20:50)

  • T61 7661-HM5 New - Can not dectect wireless card ???

    I have a new laptop T61 7661-HM5 with Product Infomation:
    Based on 7661-CTO: T7300(2GHz), 2GB RAM, 60GB 5400rpm HD, 14.1in 1280x800 LCD, Intel X3100,
    CDRW/DVDRW, Intel 802.11agn wireless(disabled),
    Modem, 1Gb Ethernet, UltraNav, Secure chip, Fingerprint reader, 6c Li-Ion, WinVista Business 32
    Currently I installed driver wireless card at:
    http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67256
    I turned on button SWITCH ON on laptop and enable Wireless Radio ON in BIOS but It can't dectect
    wireless card.
    How can enable Wireless internal card on this laptop ???
    Please help me !

    Remove the driver and install this:
    Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - Thin...
    Did you install the Vista Service Packs? Some Drivers and tools require service packs.
    Also have a look to the requirements
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

Maybe you are looking for

  • HST6.0 Header and footer in reports

    Hi, We have an application generated from designer 1.3.2 using Headstart, and now we need to upgrade that one to designer 6.0, Everyting works ok with the forms but when we try to generate reports we don't get any header and footer. I have looked int

  • Base price Calculation

    Friends, I have got a question regarding pricing. I have 2 Base Price condition types PR00 and QR00 . PR00 has a validity from 03.12.2010 and QR00 has a validity from 06.12.2010 . The price declared fro Material M1 using condition type PR00 is Rs. 12

  • Adobe premiere elements 13 can not open avi on my Mac. What can I do?

    I just bought adobe premiere elements 13. I hoped that it would help to open an avi on my brand new Mac, which iMovie of course did not open. (That's why I spend the money on premiere!) I got the file from a disc, and I don't know what kind of camera

  • Don't have marvel.conf

    We are doing an install of HTML DB on an application/web server with the necessary HTTP Server for forms and reports. I have installed HTML DB on a linked computer that is running v9 - and the install went smoothly (after I figured out I needed to cr

  • Returning pics from external editor?

    I am using elements 12 as an external editor and cannot seem to get the edited pic back in aperature. I have seen it work for others but I must be missing a setting> Help?