AT&T Unite with IP Camera

I have tried port forwarding and can't seem to find any open ports on my Unite for my IP Camera. Are there any?

Hello, lynndiwagon!
Thanks for posting. We can defnitely look into this for you, so please click here to send us a private message.
In your message, please provide your name, phone number, email address, and the best time to reach you. You can expect a reply within two business days, so keep an eye on the little blue envelope icon in the top right corner of your screen.
In the meantime, feel free to message me with any other questions or concerns.
-Mariana

Similar Messages

Compatable GPS units with Aperture 3

In the user manual for Aperture 3, there is a link for a list of compatable devices; http://www.apple.com/aperture/specs
There is no list at this link. Does anyone know where I can get this info? I'm looking to use a GPS for upcoming shoots and would like to know what is compatible with Aperture 3. Any help appreciated

Another AMOD user here - I posted a few times about this last week, but I'll borrow from that thread to talk about my experiences with the AMOD and Places.
Had a 3 week shoot in Argentina and decided to try out Aperture 3's new GPS location tagging. So I bought an AMOD 3080 logger and faithfully used it the entire trip. Here's my story, plus a few issues with Places.
First some notes on using the AMOD 3080 - at times it was hard to get to get it logging in Buenos Aires, I assume due to the building density blocking the satellite receptio. Sometimes took 20 minutes to start "flashing", meaning it had acquired the GPS signal and was logging, though it was much speedier out in rural areas.
Charging the three NiMH batteries every night was a bit of a hassle for my charger, which recharges by pairs (I logged about 12 hours a day, so the batteries were usually out of juice by the end of the day). I had a second set of extra batteries, so I would recharge 2 batteries one night and 4 the next. A couple of times I misplaced which of the three was the uncharged battery from the night before, so that was another stupid thing to have to worry about. But be sure to factor in another $30 for a NiMH charger into your total price for the AMOD (plus the weight of the chargers on the road). It might mean a more expensive unit, with a lighter and integrated built-in charger, could suddenly look better. FYI, after returning I found the following unit that charges each AAA battery independently, which would be a better way to go.
http://www.amazon.com/Crosse-Technology-BC-700-Battery-Charger/dp/B000RSOV50/ref =wlit_dpo?ie=UTF8&coliid=I38WY26GTFAAB0&colid=1JZG5Z0U956FB
But other than remembering to switch it on and off, I'd just throw the AMOD in my camera bag throughout the day. One nice thing is no fussy settings beyond on or off - it just pulls time (UTC) and location from the GPS ttransmissions - only option is to choose a 1 second or 5 second log interval.
I ended up with about 30 log tracks from the trip (everytime you switch on the unit, it adds a new track). This was more data than the 128 MB capacity, but I also was able to back up the AMOD to my NEXTODi Extreme 2700 units - I back up my images onto two different Extreme units every night before wiping my CF cards. Near the end I did a "move" onto the NEXTODi which copied the data over and then erased the AMOD.
Regarding the import of the GPS logs into Aperture, the import for the AMOD files is fast and painless. I did sych the cameras to UTC before I left (within half a second), as I thought there would be some sort of auto import. But after the logs are inside Aperture (you select/load them on a map), you have to choose the images you want to place on that particular log, then drop them onto the track at the corresponding time for the main image you have chosen. Even though I set my camera to Argentina time, when I imported my images into Aperture 3 they defaulted to US PST, my home time zone. So i had to readjust all photos to -5 hours, Argentina time, to match the GPS data. So to implement the correct placement, in this case I had to drag the selected photos around the GPS track on the map until it showed 5 hours 0 minutes time difference, then drop the photos onto the map.
Understanding this now, I suspect the Aperture team did it this way (all photos will be offset by the same time difference show when dropping) in case the camera is not set to the exact time used by satellites (UTC). But it still is a bit frustrating that I can only get a minute synch. Further, if you are in pone place for an extended time, you get a tangle of lines on your GPS track - finding the correct one wold be murder. Combined with the problem getting a signal in BsAs, I had to fuss with placing the images much more than I thought I would have to. I solved this by starting a group selection from an image that had a "cleaner" time to find onthe HPS path. Again, not a deal-breaker but a bit more hassle than i expected. All in all, I'd say I spent 5 or 6 hours getting the 7000 images on the correct tracks, at the correct times. Ths included some time for manually placing images that fell outside of the logs.

What happened with my camera? I can't explain it.

I shoot a lot so I've seen lots of things happen with my camera but this I can't explain. I had my 5D Mark III set up with a 17-40mm f/4L lens on a tripod late one night in my firends basement. I had my camera on RAW and was doing light paiting and shots with a couple 600ex R/T's. I looked at every shot after I took it to adjust lighting and I know when I do and don't take photos becuase I had my intevolometer set up to control camera shake easier and control when I do and don't ake a photo. I went back to look at the photos I took and there was an image I did not take (which is attached). It was a giant green circle that took up the entire center of the image and was perfectly centered. There was no light at all when the camera took the picture because I had lights off to control the lighting as I was showing my friends what you can do with a couplt flash units and radio transmitter as they were not photographers. No light could of reproduced because of the way the light falls off in what almost appears to be banding. The pattern as you can see on the image is extremely weird and interesting the way the pattern falls off. The weirdest part didn't even happen yet. When I loaded the image onto the computer the photo completely changed on me in Lightroom to the weirdest colorful pattern on its own without me touching a thing. I reloaded it and the same thing happened but when I renamed the file and then loaded it into lightroom the image stayed. What happened? Has anybody came accross this before? Let me know, the place is supposedly haunted but I'm sure there is an explainable reason why this happened the way it did.

It is simply a corrupted image. You did shoot it. You just can't tell because of the corrupted file. The last is how LR interpted it. I would replace the CF card. Especially if it happens again. And if it keeps happening have the camera checked out.

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

How do I move photos around that I took with the camera?

Alright I have a bunch of photos in the "Camera Roll" that I took with the camera phone.
It defaults to the Camera Roll folder, but how do I move them to other folders on the phone?
Can I do multiple pictures at once?
Or do they have to be moved one by one?

If you disabled the Camera & Scanner Wizard from launching automatically when a digital camera is connected - when your iPhone includes photos that were captured by your iPhone or when photos are available in your iPhone's Camera Roll, the iPhone is also detected as a digital camera when connected to your computer - you can try this.
http://www.microsoft.com/downloads/details.aspx?familyid=C680A7B6-E8FA-45C4-A171 -1B389CFACDAD&displaylang=en

HT4623 my IPod Touch is a generation 3 with a camera and when i go into my settings and try to do what the instructions on your website say but in general i only have About and then the rest of the bars but i don't have one that says Software Update

my Ipod Touch is a generation 3 with a camera and when i go into the settings to look for the Software Update bar i don't have one

If you have cameras then you have 4G iPod. To update connect to your computer and update via iTunes
iOS 4: Updating your device to iOS 5 or later
- A 4G to 6.1.5 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later

Is there a known problem with some cameras, e.g. the E-410?

I bought an Olympus E-410 yesterday, took a few pictures, and then wanted to load them onto my eMac. But the computer never saw the camera. The screen on the camera said "One moment" forever. I had installed the software that came with the camera, but that said "When iPhoto comes up close it and open [the Olympus software]".
I installed it on my Windows machine, and it saw the camera as an installed device, and the Olympus software worked fine, with the same cable.
I would have expected it to work because it is explicitly mentioned here: http://docs.info.apple.com/article.html?artnum=306297
We regularly add pictures from my wife's Canon Powershot A80, into iPhoto, and it works fine.
Any helpful ideas?
Message was edited by: Logistes

No! I was wrong. My iPod showed the same symptom. The common denominator is that the Maxtor was plugged in at the same time. I had no problem with the new camera today, after removing the Maxtor's USB.
That's a relief, but not perfect. I guess I should have got a Firewire HDD

On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

I can no longer download photos to my ipad with the camera attachment. the message says thats its using too much power. i have a 100% charge and i used it before and it worked fine.

I can no longer upload photos with the camera attachment. I am getting an error saying the device uses too much power. I have used the device before. Is there anything that can be done to fix this problem?

You don't actually say what the problem is, but maybe this can help:
USB and Firewire information:
http://support.apple.com/kb/HT1151?viewlocale=en_US
http://support.apple.com/kb/HT4049?viewlocale=en_US

Terrible customer service, and no help with defective camera

Madams and Sirs,
This camera (see below) was a Christmas present, and we discovered first last week that it had a manufacturing defect. (one of the small tabs holding the case half together got installed in a pinched way.)
Best Buy has always had fantastic customer service, and we have been very happy. We have spend many thousand dollars in your store every year. So we were sure the store would have a solution.
We took it in to your store #1423 on Curtner in San Jose to try to exchange or replace under warranty.
I understand you sometimes you are not able to help a customer, but this email is first about the shock I got when I spoke with Megan in customer service.
As many customers in Silicon Valley, I am an engineering manager, and we have performed destructive testing on many of our own products. The defect on this camera is obviously a manufacturing defect, and not possible to be caused by poor handling. This is very obvious.
Megan told me with other employees as well as my son listening next to me that I was a liar, and that the damage was caused by abuse, and not a defect. I tried to explain that was not possible, and she interrupted me, and again said that i was not telling the truth, and that the assembly error was caused by us.
I then asked if it was possible to have the matter reviewed by the store manager, and she responded she was the store manager.
I left with the camera, and the matter unresolved, and had to explain to my son that I was not a liar, and that Megan must be wrong and "some people just have a bad day sometimes".
I will not be spoken to with insults like that, and I can no longer go to your store with my kids, and if my employees treated any customer the way Megan did, I would make sure she received training to correct this. If the store manager have this attitude to customers, the entire organisation usually follows, and I will not be a customer in a store like that.
1. Please help resolve this issue.Order number: {removed per forum guidelines}

Hello erikev,
Cameras are nice to have, especially with young children, so I can imagine how frustrating it can be to find yourself with a pinched casing. When something goes wrong, it’s never a fun situation, and while it may not be something we can necessarily help with, great customer service should still be provided. It sounds like this didn’t happen the way we hoped, and I’m sorry this was at your expense.
As this situation is definitely concerning, I looked into your account to see how I might be able to assist. However, I have found your concerns have reached Terrance with our executive support team. He is currently looking into your situation and should contact you once more information is available. From here, Terrance will be your first point of contact.
Hopefully he can find a good resolution for you,
Alex|Social Media Specialist | Best Buy® Corporate
Private Message

Do any one know how much it is to get the new ipod touch with the camera if you trade in your old ipod touch?

do any one know how much it is to get the new ipod touch with the camera if you trade in your old ipod touch?

Sounds like you need a new battery. I would make an appointment at the Genius Bar of an Apple store to confirm. Apple will replace the battery for $79. A third-party place like the folloing may be less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
You can also replace it yourself if you are so inclined. For parts and instruction:
iFixit: The free repair manual

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

I had Leopard on may Mac. I upgraded to Mountain Lion using Snow Leopard. I can't use my video with Mountain Lion. Can I load Snow Leopard on an external hard drive so I can use it with my camera?

First, you cannot do this if you have a Boot Camp partition.
Second: Create a new partition.
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Third: Install Snow Leopard.
Boot from your Snow Leopard DVD. Follow instructions for installation being sure that before you actually install Snow Leopard you have selected the new partition as your target destination.
Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo
appears.
5. Wait for installer to finish loading.

If I have an iPad 1 with no camera, and I want to change it for an ipad 3 is true that if I give my ipad I get the cheapest ipad 3

if I have an iPad 1 with no camera, and I want to change it for an ipad 3 is true that if I give my ipad I get the cheapest ipad 3

Apple does not take trade-ins. In a few countries Apple does work with a company who will give you some return on an existing device; for the US, see:
http://www.apple.com/recycling/gift-card/
Similar programs are available in a few other countries, and some dealers may have their own trade-in programs. But you most probably can get more for your device if you sell it yourself, as Eric suggested.
Regards.

Problem with Nokia Camera and Smart Sequence

Hi,
I'm having a problem with Nokia Camera and the Smart Sequence mode.
Basically, if you take a picture using nokia camera, and view it in your camera roll, it usually says, underneath the pic "open in nokia camera".
Well, if I take a pic using the Smart Sequence mode, it just doesn't say "open in nokia camera" so, to use the functions of smart sequence (best shot, motion focus, etc), I have to open nokia camera, go to settings and tap the "Find photos and videos shot with nokia camera" option.
Does anyone has the same problem? Anybody solved it?
I already tried reinstalling nokia camera, but that didn't help.
I'm running Nokia Black on my 925.
Thanks everyone!

Hi,
I had the same problem with my 1020. It did get fixed with the last update to Nokia camera.
However, IIRC, it didn't just happen right away. When browsing the camera roll I'm pretty sure that the "open with Nokia camera" text wasn't there.
Slightly disappointed I opened the (Nokia) camera anyway and was going to test the smart sequence again. I noticed the only precious pic I'd taken using this actually appeared top left of the screen.
I opened it and I had all the smart sequence editing options again - that we're missing previous. Made a new picture and saved it.
Now when in camera roll the text shows below the image and all is good.
This probably doesn't help much except that it didn't seem to fix automatically.
I work @Nokia so I can ask around a bit to see if this is a known / common issue (not that I know any developers)

Hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

hi, i have a macbook air and i've been having problems with the camera when i'm using skype. i know im no the 1st one and i'd like to know when apple or someone 'll do something about this.

Try reinstalling Combo Update.
http://support.apple.com/kb/DL1676
Best.

AT&T Unite with IP Camera

Similar Messages

Maybe you are looking for