At the BIOS updating the HP Pavilion zd7000 laptop hanged

At the HP Pavilion zd7000 laptop BIOS updating from a site HP.com (the file sp33465.exe, OC Windows XP) the laptop hanged and to a BIOS it was not established. Now at inclusion all bulbs burn, but the laptop doesn't submit life signs, fans,
NDD don't work. The BIOS.bak file remained, but with USB-Flash it is impossible to establish. At USB-Flash connection it
3 times blink and is disconnected. Prompt how to return BIOS.

Thanks for the answer. On the bottom cover there is a bar code and number - DP080AVR MFQ# 2CB41216S4 Made in Taiwan.
Any error messages on the screen wasn't and isn't present. Updating hanged approximately for 40 % -
6 dark blue segments. After laptop switching off, approximately in 1 hour, it doesn't join any more, and at all doesn't submit
any signs of work. All light-emitting diodes on the top panel only burn.

Similar Messages

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

New NF980-G65 with an AMD X6 1090T and the BIOS Update Utility Crashes?

Last week I received my new NF980-G65 board and with it an AMD Phenom II X6 1090T (Thuban 3.2GHz Socket AM3). After installing the board and starting it up for the first time I noticed that it reports BIOS version 1.1 and CPU unknown. Next I downloaded the BIOS update to version 1.3 from msi, made a boot USB stick and powered up again. System will not boot from USB. I tried now over 20 different sticks from 256MB to 64GB and none of them worked!
Went back to my old system and ripped its floppy drive out to install it in the new computer. Had to go to RadioShack since I have not touched a floppy in over 10 years, but they had some on clearance. Made me a boot disk, put the new BIOS and install utility on it, booted the system with the floppy, started the BIOS update utility and watched it crash. When I start it by itself it gives me three screens of options and commands, but as soon as I try to use one of the commands or update the BIOS it keeps crashing.
What do I have to do to get the BIOS on the NF980-G65 updated so it will run with my AMD X6 1090T processor?
Thank you in advance for ANY help...
Tyler

Quote
I am sorry, but I need to work with this thing since I make a living writing code, I do not play with it! This thing and the support I am getting for it are not worth my time or money!
What thing are you talking about? You are experiencing the a certain symptom for which you do not know the cause. For some strange reason and without any in-depth tests you seem to assume that the board must be the problem (ignoring all other components (for example your factory overclocked memory modules).
Quote
the support I am getting for it are not worth my time or money!
What support have you tried to get that actually has to do anything with money? Please note that this is not MSI Technical Support but a User-to-User forum, run by users (just like you) that do not get paid for donating their private time to try to help others. Whatever your level of frustration is in regards to the money spent for your components, please do not use it to insult anyone here in this forum.
Quote
The result remains the same, the update utility keeps crashing...
Are still using the same floppy drive with the same floppy disk in it?
What is your current BIOS-Version?
Quote
BIOS update utility
What version? What is the exact file name of that utility?
Quote
ade me a boot disk
How/Based on what DOS Version?

Satellite P500 - After BIOS update the number pad isn't working anymore

I just got a Satellite P500 and am running Windows 7. I downloaded all of the latest drivers and updated the system bios to version 1.70 (from Toshiba's support website). Now, my number pad on the keyboard is not working.
The numlock light is on and when I hit the "6" key on the number pad, it turns the light on/off but the behavior of the other keys does not change whether it is on or off. The "-" key enters a "6" but none of the other keys (except "enter" does anything.
I removed the keyboard driver and restarted to re-install the keyboard driver but that had not effect. The keyboard did work for a few days after I flashed the bios but seems to have stopped since I started using a USB mouse. I tried uninstalling the USB mouse driver but that did not do anything either (it was a Logitech driver).
Anyone have any ideas? Thanks in advance

I'm having this exact same issue, Did the BIOS update, which fixed the problem for Vista X64, formatted the machine to windows 7, Number pad keys except 6 and - Register as the Fn Button, Bringing up the function shortcuts display when pressed in windows, recovered from 7 to Vista X64 using Built in recovery partition, Problem still exactly the same. i have reset BIOS to defaults twice now, which has not resolved the issue. the next step will be to reflash the bios with the update again to see if this will fix the issue as it did once before. Laptop Model P500/025 Or Part number PSPE8A-025002
*EDIT: I reflashed the BIOS with 1.70 Again and the number pad is back to normal. Seems like an extreme fix for a silly problem. Every time you format you have to Reflash your bios, risky no?*
Message was edited by: Matrixion

Satellite L300-26K - After BIOS update the touchpad doesn't work anymore

Hi,
like recommended by tempro, I updated BIOS from ver.2.1 to 2.2 (windows-Version). After rebooting, touchpad incl. tips doesnt work anymore. In bios touchpad is enabled, in system it says unit is working properly. FN/F9 makes no effect. Reinstalling synaptics drivers - no effect - still dead.
Satellite L300-26K
Using Vista 32bit home
How can I restore BIOS to 2.1 again? (if i try the windows-bios utility from V2.1 it says it is still installed - so I cannot downgrade by this easy way)
Please help - I need my notebook without external mouse (this works)
yours
Oliver
Message was edited by: enigmo

Hi enigmo,
I cant imagine that this happened due the BIOS update. Have you tried reinstalling Windows by using Toshiba recovery disk?
This BIOS downgrade can only be done from an authorized service provider. The technicians can install every version because they have such special tools to make a downgrade.
On the Toshiba website you can find a list of them. Just give the guys and ask for that. They will help you! :)

E540 After BIOS update the computer wont start

Hi!
After I did an BIOS update from windows the computer wont start. Only the green FN key and the red "i" in the word ThinkPad lights up!
I can't access BIOS.
Tried tho remove the small CMOS battery for an minute

If these long boot symptoms, following the BIOS update occur, multiple customers have reported success in resolving them by disabling Intel AMT and setting the security chip, TPM, as active in the BIOS.
Steps to disable Intel AMT and enable TPM settings as below.
Boot into BIOS
Select Config
Select Intel AMT
Press Enter key on Intel AMT Control and select Disable
Press ESC twice
Select Security
Select Security chip and select Enable
Press F10 and click Yes.

How do I roll back the BIOS update on Satellite U400-157?

I recently updated a Tempro alert for BIOS update for the note book. I now notice that the screen blanks out a few times at PC start up. It was't there before. How do I roll back the BIOS update to an earlier one.
I don't get to see the BIOS update screen else where other that the time that I did the BIOS update.

Hi
To be honest I dont understand exactly what is your problem.
You said: . I now notice that the screen blanks out a few times at PC start up.
What does this mean exactly? Is your display black until Windows has booted up?
To be honest, I dont think that BIOS update would be the reason for that go to BIOS (press F2) and set the BIOS to default settings (F9) and save the changes (F10).
If you want to get back the earlier BIOS version, then you will need to flash the BIOS ROM module using an DOS based BIOS version. On the Toshiba European driver page you can find only the win-based versions

Bios update UEFI for Pavilion dv6-6b13ss

hello guys,
Cant find the Bios update UEFI for my Pavilion dv6-6b13ss, tried everything possible still can't find, any solution please?
The other proplem i have that HP detect my computer model as Pavilion dv6-6b13ss but on the bottom of my device is written Pavilion dv6 6166ee so whats seems to be the proplem here?
PS : when update the bios with file HP presented for Pavilion dv6 6166ee i got the message that this bios update its not for this model.
thanks,

Hi @aliens1983
Welcome to the HP Forums!
It is a terrific place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp you are unsure of the exact model notebook you have as the auto detect states you have the Pavilion dv6-6b13ss but the sticker on the bottom states it is Pavilion dv6 6166ee .
It is most likely the former as that is what the tool detected after scanning your system for information.
Here is a link to How Do I Find My Model Number or Product Number? that may also help to clarify this for you.
Here is a link to the HP Pavilion dv6-6b13ss Entertainment Notebook PC Support And Drivers where it does list the latest recommended bios update as F.1C.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Is is the BIOS or the system board?

Hi. I have a pc manufactued by a deceased company named Quantex. The pc has a MSI MS-6199VA
system board with W6199VAFD v3.3 121799 Bios, an Intel P6C (Coppermine) Pentium III 733Mhz
processor and a VIA Apollo Pro 133 chipset.
I have been having some trouble with the pc over the last month. It has an nVidia GeForce 256 video
card and around the middle of October I updated my install of Norton SystemWorks from NSW 2002 to
NSW 2003 as well as updating the nVidia drivers to the latest version (40.72). Things have not been the
same since. I started getting random system freezes and 0D or 0E Fata Exceptions as Windows 98SE
was starting to initialize and display the desktop and Windows signon. I was always able to restart in
Safe Mode, but not always able to get around the Fatal Exception in normal mode.
Over the course of the next month, the pc never really attained stability. Sometimes it ran fine for a while,
then would just freeze. I started backing up more often and got PowerQuest Drive Image for disaster
recovery purposes. I already had a tape drive, but sometimes the tape backup software would
freeze/stop functioning in the middle of a backup.
I then got a larger hard drive, so that I do Drive Image backups to HDD rather than CD-RW. I got an
ATA-100 80 Gb drive but did not yet install it.
This past week I checked your website to see if I could find any additional information about my BIOS
and if it would support the new hard drive. I saw that I was on v3.3 and that you have v3.5. It also
appeared to me that v3.5 was needed for the new drive. It also seemed to me that my issues could be
hardware (ie, system board) related.
Anyway, I used your v3.5 BIOS update utility to backup my existing BIOS. Double checked my system
board and chipset and then tried the v3.5 update. The flash update did not write completely (out of the
two full rows of white progress boxes around 6 of them were blue). I restored the original bios and
regained some function. However, I can no longer even get through the CMOS setup without the pc
freezing.
I have reseated all cards and the processor as well as trying only one memory chip at a time. Nothing
has changed the behavior. I even reflashed the v3.5 BIOS, this time with a clean update (all white
progress boxes). Still no stability.
I am just looking for some advice. It my system board gone? Was it going or did I destroy it with the bios
update? Since my original equipment manufacter is no longer in business I have nowhere to go for
hardware support. Is it possible to find a replacement system board or better to cut my losses and get a
new pc. I am fairly pc competent but not to the point where I would swap out a system board on my own.
Vic

On Friday I decided to take everything apart; including removing the system board and then put it all back together. Believe it or not, without any repairs since I last replied in this forum, my pc is now somewhat revived. It appears as though my problem might have been that the processor was not completely seated in the slot. Does that make sense? The freezing during CMOS setup or OS startup has completely disappeared.
There are still some stability problems and there also appears to be a BIOS issue.
I think the stability problems are from corrupt OS files (Win98 SE) and I am thinking the only recovery for that is to reinstall. Nothing like a perfect opportunity to move this hardware to Windows 2000.
Now for the BIOS question. This board is an MS-6199VA. The BIOS is W6199VMS v3.5 100200 with BIOS ID of 01/01/2000-692-596-W977-2A6LGM4BC-00. At the tail end of the BIOS startup I get the following..
CMOS Checksum error - Defaults loaded.
Warning! CPU has been changed.
Please re-enter CPU settings in the CMOS setup and remember to save before quit.
Press F1 to continue or DEL to enter CMOS setup
I have gone through all the CMOS setup options, set them, changed some; like disabling a serial port and setting up a power on password, and save them. Yet I still get this message every time.
Other than halting the startup until I press F1 or DEL there seems to be no other negatives. Am I missing something or is there a storm coming?
Vic

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s

I currently have a DROID RAZR M and I'm 1 year into my 2 year contract. Since the Kitkat update, the phone won't stay charged and it's very buggy. I know this is not Verizons fault but it's also not mine. I would like to change my phone to an iPhone 5s and keep my same plan but switch to the Edge program. Is this possible? I don't think I should have to pay an early termination fee or anything like that since my phone has become almost unusable. I know under normal circumstances you have to wait 2 yrs to upgrade but due to the update and the poor service I'm now getting I hope Verizon can make an exception. Thank you.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favor

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favorites icons, URL field and Google search field while in full-screen mode, so it's not really full-screen anymore. How can I correct this?
== This happened ==
Every time Firefox opened
== Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

How can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible

how can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible

It's still not known if and when Google Maps becomes available in the AppStore. This is today's story: http://www.macrumors.com/2012/09/25/google-has-not-yet-submitted-a-google-maps-a pp-to-apple/

HT201412 i was updating my iphone 3gs to the new updates - the system said it couldn't finish the download - three hours later. now the phone is unresponsive. help

i was updating my iphone 3gs to the new updates - the system said it couldn't finish the download - three hours later. now the phone is unresponsive. help

Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?

HT201303 The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

The Itunes store constantly asks me to Improve Apple ID Security by adding three secret questions but won't accept my valid password. I have tried to reset the password, update the billing info and it still won't let me make any purchases.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I've downloaded the Mozilla update several times on my laptop, but it keeps telling me to download it. Is there another step?

I've downloaded the Mozilla update several times on my laptop, but it keeps telling me to download it. Is there another step?

You may have some pending files left in the updates folder.
Remove the files in the updates and updates\0 folder.<br />
You may need to delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

At the BIOS updating the HP Pavilion zd7000 laptop hanged

Similar Messages

Maybe you are looking for