At the end of exporting Premiere freezes for a few minutes

Hi,
my computer is a i7 4930K @4,5GHz, 16GB RAM, 250GB SSD, Radeon 6950.
I was editing a 50 minutes long movie (cca 20GB source clips, cca 4,5GB output movie).
The export ran very well finishing after about 25 minutes but then Premiere froze with message "encoding, 0 seconds remaining" displayed and nothing seemed to be happening.
I realized the HDD activity was shining (not even blinking), the Widnows resource monitor reported cca 70-100MB/s transfer on my SSD (even though I think my SSD should be faster) and when I held F5 while looking into the export directory the output file was growing on capacity.
If I concider 70MB/s writing the task shloud be done in cca 1 minute. But it took I would say 5 minutes or even more finishing this task. RAM was not even fully used.
Is this behaviour normal?
How can I improve this? Is my SSD slow?
Thanks

Multiplexing is the process of interleaving the audio and video in a single output file. When you export with multiplexing set to None, you'll end up with the audio and video in separate files. That's probably not what you want.
That said, I suggest doing one export with the multiplexer set to None. If encoding then completes immediately upon hitting 100%, that  confirms that multiplexing is what's adding time at the end.
What I don't know is how long multiplexing should take for a sequence of a given duration.
If you're so inclined, you could submit a bug report that the progress bar doesn't factor in the multiplexing time.

Similar Messages

  • ITunes 5.1 can't find track names - also extremely slow (freezes for a few minutes when inserting new CD

    Since upgrading to iTunes 10.6 for Windows 7, it can't find any track names (or artwork). First, when you insert an audio CD, iTunes freezes ("not responding") for a few minutes, then it queries the Gracenote Media database, and a while later, the track numbers "Track 1", etc. are displayed and a message saying the track names can't be found do I want to continue to import the tracks. I tried reinstalling the previous version which worked fine, but it won't run saying the Library ID was created by a later version of iTunes.... I also can't access the iTunes Store from itunes on my laptop.

    I have the same problem, any answears???

  • After changing the battery in my iphone 4s, the phone will not boot up. I only see the apple and when it sits for a few minutes, a code shows above it. What is going on? Did I damage the phone by replacing the battery?

    My sister gave me her iphone 4s for my son. It needed a new battery so, I bought one and replaced it. after doing so, it will not power up. I can only see the apple on the screen and when left for a few minutes.... 10 lines of numbers and codes show up at the top of the screen. Did I ruin the iphone by replacing the battery? Was a simple switch so I don't understand what is going on. Have never had one of these before.

    iPhones are not user servicable.
    Take the device to a competent repair person or buy a new one.

  • Computer freezes for a few minutes after minimizing/closing Photoshop/InDesign

    Hello,
    So I've had this problem since I got the computer, but it has gotten much worse recently. After I work in photoshop and indesign for a few hours, I minimize both programs and the computer freezes for a good 4 or 5 minutes, even my winamp music player starts skipping. I'm thinking its the RAM that needs time to dump out the data and its doing it very slow.
    I have:
    Q8200 2.33 ghz overclocked at 2.51
    8BG of RAM
    ATI EAH4850 512MB
    I'm thinking it might the overclocking or the Not so high quality of RAM sticks. please let me know of any other suggestions.
    Thank you

    Thank you for the response. I disabled the overclocking and unchecked Export Clipboard. It seems to be a bit faster, but I haven't tried it extensively yet. I'm running XP x64, if that makes any difference.

  • Why does downloaded videos from iTunes freeze for a few minutes and then continues. this happen with my iPod Touch 4G and iPad 2.

    When I try to watch downloaded TV and Movies from iTunes they will pause for a minuite or 2 and then continue. I have an iPod Touch 4G and an iPad 2. Both have the same problem when trying to watch the shows. Plus. When I try to watch the iTunes TV and Movies on my Windows 7 Desktop the audio is never in sync and usually stops playing.

    Im having the same problem with my g4 iPod touch and it is driving me nuts. The freezes happen with downloaded movies ON my ipod, not my computer so these suggestions won't work. I read that the same problem is happening with rentals. I would love to know why this is happening. I would like some answers... and a way to fix it.

  • My computer seems to be running very slow.  It will screen freeze for a few minutes at a time.  Any help or suggestions??!!

    Also a screen keeps appearing asking me to enter my keychain password. But I am unsure what this is.!?

    That certainly looks like a low memory issue, 2 GB ram is barely enough to run Mac OS X versions from Lion through Yosemite.  The high number of Page Outs and killed processes show very high memory pressure.
    Try adding memory, but be sure it is high quality, Mac certified memory such as that from OWC, http://www.macsales.com or Crucial, http://www.crucial.com

  • File selection dialog box freezes for a few seconds

    When I try to open files / select files from within certain applications (e.g. Aperture, Photomatix) the file selection dialog box freezes for a few seconds which becomes irritating because I can't scroll to the actual file that I want very easily .)
    (I notice the problem generally when I am working in photo editing applications. And yes, I do have some 25MB TIFFs in the target folder...)
    I suppose this is because the finder is "loading" a preview of the files.
    Does this happen to everyone (if so, it would be quite a Windows-like irritation untypical of OSX).
    If not, then what could be going wrong here?

    I have answered my own question by a bit more research.
    It seems a lot of people having this trouble for a while. It is down to Logitech software. Specifically the Logitech Control Center.
    See this forum (last entry):
    http://bit.ly/eEomwp
    The simple solution: uninstall Logitech Control Center. The mouse still works without it.

  • Internet dropping. Works for a few minutes, sometimes seconds. Then cuts out completely and hangs.

    Since doing a clean install of Mountain Lion on my 2011 iMac. The internet connects on startup, works for a few minutes, then hangs as if it's getting stuck.
    Everything is up to date and I've tried numberous ideas to fix it (Renewing the DHCP, editing the MTU). Nothing works.
    It's still fully connected to the wifi and says there's an internet connection but nothing will load, not just the browsers but also anything else to do with the internet also doesn't work.
    I've seen others with the same issue also.
    Any assistance would be highly appreciated as my iMac is pretty much rendered useless currently.

    Mort wrote:
    Before you do any settings on your Router, First you can upgrade the firmware of your router. Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
    Follow these steps to upgrade the firmware on the device : -
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now reset your router :
    Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    Click Here to configure your router with DSL ISP. 
    Thanks for the instructions Mort and clong but before I update my firmware, I was able to connect to the internet on my computer with the router at last! But there is still a problem. Whenever I try to connect my PS3 to it, it would stop working for both my PC and the PS3.

  • When I use Firefox and Hotmail at startup, Firefox freezes for about 1 minute, and then I can continue. First I though it was my computer but 2 other girls in my class have the same problem with Hotmail and Firefox. What can I do to change this?

    When I start Firefox, about 15 seconds after I start it, my Firefox freezes for about 1 minute. I found out that it is my Hotmail that makes Firefox freeze.
    First I thought it was my computer, but I have 2 other girls in my class that use Hotmail and Firefox and their computer also freezes for 1 full minute.
    This is very annoying, what can I do to change this?
    xxx ellen
    p.s. I am from the Netherlands, maybe that has something to do with it?

    Try deleting cookies and cache:
    1. Tools| Clear recent history
    2. Time range to clear: Everything
    3. If it isn't already selected, select '''Cookies''' and '''Cache'''
    4. '''Clear now'''
    '''Check cookie exceptions'''
    1. Tools | Options | Privacy Panel
    2. Set '''Firefox will: Use custom settings for history.''' '''Insure Accept cookies for sites and accept third-party cookies''' is selected
    3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
    '''Safe Mode'''
    Add-ons can cause problems with not being able to log into certain websites. To see if this is the case with your issue, run [[Safe mode]]. When you get to the safe mode window, select Continue in Safe Mode. If this resolves your problem, see [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Also see [[Updating Firefox]] and [[Cannot log in to websites]]

  • When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
    Problem signature
    Problem Event Name:          APPCRASH
    Application Name:          iTunes.exe
    Application Version:          10.2.1.1
    Application Timestamp:          4d756476
    Fault Module Name:          MediaToolbox.dll
    Fault Module Version:          1.0.694.3
    Fault Module Timestamp:          4d4d9a00
    Exception Code:          c0000005
    Exception Offset:          0034a672
    OS Version:          6.0.6002.2.2.0.768.3
    Locale ID:          2057
    Additional Information 1:          fd00
    Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:          fd00
    Additional Information 4:          ea6f5fe8924aaa756324d57f87834160

  • My iMac freezes up after the screensaver runs for a few minutes

    My 30inch iMac freezes up after the screensave has been running for a few minutes.  This happens about every other day.  I leave my system running all the time.  nothing will unfreeze things so I have to do a hard button reset.  I am running all the latest system updates etc.

    Reinstall  Safari 5.0.6 for Leopard
    Then restart your Mac, try Safari.
    If it crashes again, third party plugins could still be at fault even though they do not show up in the report.
    Follow the troubleshooting help here >  Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

  • When I try to export with Quicktime, the iMovie (9) runs for a few minutes and I then get this message:The movie could not be exported because an error occurred. (-2125)

    When I try to export an iMovie (9) to quicktime, the iMovie runs for a few minutes and I then get the message: The movie could not be exported because an error occurred. (-2125)  What can I do to correct this?

    Trash your preferences. Trash your project render files. Switch off background rendering. Export without using the computer for anything else.
    Oh, and if you're using 10.9 switch off App Nap.

  • When I have documents open and I walk away for a few minutes, when I come back and try to resume working, my computer seems to freeze up and the little pinwheel starts spinning and I literally have to unplug my computer to get it out of this frozen state.

    When I have documents open and I walk away for a few minutes, when I come back and resume working, my computer freezes up and the little pinwheel starts spinning.  I literally have to unplug it to get out of this frozen state.  This has been getting progressively worse over the past three months.  I recently took it into the Genius Bar and they could not find anything wrong.  They told me to add more memory, which I did.  However, the problem persists. Do you know why my computer would freeze up after the screen has had no activity for just a few minutes?  My screen saver is set for an hour so I know this is not the problem.

    What kind of documents? Office? iWork? Text Edit? What version?
    What settings do you have in regards to power saver and/or screen saver?
    For these kinds of system glitches I always recommend installing and running Onyx 'Automation'. If that does not work you should reinstall the offending software, if possible.
    Onyx - http://www.titanium.free.fr/download.php?sid=d1caebc01e3207556c6d75791305ccf2

  • Long click to select an alternate tool, the flyout freezes for a few seconds

    When I long click to select an alternate tool, the flyout freezes for a few seconds before I can select a tool. How can I fix this? My only work around right now is to know the tool shortcut and then to cycle through it with shift+tool shortcut.
    Thanks,
    Zack

    So I don't know what happened. This has been the case ever since I can remember, but today I got a wacom tablet and now the tablet and the mouse can use the sidebar as normal. All I can assume is that the drivers for the tablet fixed some preference list file error...

  • IPod freezes for a few seconds but the sound continues playing

    Hello!
    I recently transfered a large MP4 onto my iPod, and I found that the playback on the iPod occasionally freezes for a few seconds, and then continues playing, but the sound continues throughout. The same video plays OK on iTunes without any freezing. Could somebody help me please?
    Yours faithfully,
    Norman Tang

    i had the same problem on my 1.1 firmware but when i updated it,there was nothing like this.

Maybe you are looking for

  • I think I'm in big trouble now - CFReport

    Hi all, My client asked for some nicer reports that don't look so "excel-ish", specifically they wanted to see some nice looking 3D charts along with their data in a PDF format. So, I worked on trying to create some nice mockup charts using the CFCha

  • What would be a better choice between a MacBook Pro and a MacBook Air?

    I will be starting college next fall as a neuroscience major and I am torn between purchasing a MacBook Pro vs. a MacBook Air. Which would be a better choice considering I would be using it to take notes, creating documents, presentations etc.? I am

  • How to set classpath and server configuration in eclipse

    i am new to eclipse tool pls anyone tell me to set classpath and serverconfiguration (tomcat) and sample program

  • Auto call timer announcement and cut off

    I have been asked to come up with a comms solution for detention cells, where the detainee has the right to make a 30min call to their legal rep. The system would ideally announce at the start of call "your call is limited to 30 mins", then after 28

  • Output of DMEE format

    Hi all.. I am using DMEE format for ouput file which to be sent to bank in their format. I designed the format and did all configuration settings for the same. Now how to get the file output to my desktop or common server? Kindly guide. Thanks & rega