At the moment i'm trying to uninstall and reinstall firefox because when i open it all i get is a white page. But when I go to uninstall it it says that firefox is still running yet it isn't. Iwould just like some help on this please

I've checked everything that might be running firefox and it isn't running

Hello Wyodor,
thanks for your reply on my question.
You are wright the index file is 308 KB.
And offcourse that I delete my files and documents is not an Iweb problem, but because my English is not that good, that I thougt I try to tell the whole story, and hope people can read trough the lines.
Why I didn't use Iweb to upload to the server is because the server company recommanded to use file zilla. And I am a nobody with this kind of things, so I did exactly what they tell me to do.
No, i did not make a backup of Iweb and the domain file, but reading other messages on this forum showed me that I can maybe try to make empty the cashfile (?)
and otherwise I have bad luck and have to make my website again. Offcourse I have a lot of examples from all the pages (copied from the local map to my USB stick) and my website is aprox. 15 Mb, (not so big) so it will cost me a few nigths.
But I'm still hoping on a miracle :-)
greetings Lasource

Similar Messages

None of my "paid" books will open in iBooks. They show they are there, but when I open them all I get is a blank page. I have checked all the newbie mistakes. Mavericks will not let me uninstall and reinstall iBooks.

All the books I paid money for will not open in iBooks on my MAC. Mavericks will not let me uninstall iBooks, so I cannot uninstall and reinstall it on my Pro. I have deleted and re-loaded the books and they show in my library (as they always did), but when I open them, all I get is a blank page with three dots at the bottom, flashing in sequence. This does not affect the free books from the book store nor does it affect the PDF I have loaded myself. (I had this problem on my iPad when the latest big software came out about a year or two ago, but I was able to re-initalize the complete iPad from my Pro Book.) I have tried just about everything I can think of, but all to no avail. To save time, I have reset my iTunes password and performed all the other "Apple Tips" in the support section, but after 5 hours I am giving up. Surely someone else must be having the same issue??

Yup, same issue since installing Mavericks. iBooks works fine on my wife's Macbook Pro, but on my Mac Pro none of my purchased (protected) books will open - only the free/unprotected ones.
I'm asked for my AppleID password, but nothing happens when I try to open a purchased and downloaded book. I deauthorized, reauthorized, etc ... nothing. Each purchased book that I double-click gives me a dialog asking for my Apple ID password. Nothing else.
I was already buying more books via Kindle than iTunes and this just seals the deal for me. At least I can read my already-purchased iBooks books on my iPad still...

I can't open mail, all I get is a white page with the 5 icons at the top right, the flag, folder etc. then the white pages disappears. I have rebooted, reset my iPad, doesn't help. HELP anyone....tnx

I can't open mail, all I get is a white page with the 5 icons at the top right, the flag, folder etc. then the white pages disappears. I have rebooted, reset my iPad, still can't get mail to open. HELP anyone....tnx

Hello tomzmem,
Welcome to the Apple Support Communities!
This situation does sound very frustrating. I know that you have tried some great troubleshooting steps already and the issue remains unresolved. Have you forced the Mail application to close and then opened it back fresh? If not, this is the next troubleshooting step I would suggest. Please let me know if the issue remains unresolved.
Force an app to close in iOS - Apple Support
Have a great day,
Joe

After I close Firefox and then return to open it my computer says that it is still running and needs to be closed or the system restarted. How do I resolve this?

Question
After I close Firefox and then return to open it my computer says that it is still running and needs to be closed or the system restarted. How do I resolve this? edit

See this - [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]

I uninstalled itunes for windows 7 and tried to install itunes 10.5 and it won't work. I deleted all existing apple programs from my computer but when I try to install again it says so long error involved with microsoft?I uninstalled itunes for windows 7

help ,me

Did you try anything suggested in the last thread you posted?
Views
Replies
Last Post
I uninstalled itunes for windows 7 and tried to install itunes 10.5 and it won't work. I deleted all existing apple programs from my computer but when I try to install again it says so long error involved with microsoft?I uninstalled itunes for windows 7

I have the latest version of free Quicktime, Itunes and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

i have the latest version of free Quicktime, Itunes and unable to view video on my PC all i get is a pink screen the audio is OK i have uninstalled and installed several times same problem, i have a Iphone 4 and unable to view the content.

Open your QuickTime control panel (either via the Control panels, or by going "Edit > Preferences > QuickTime Preferences" in the Quicktime Player). In the Advanced tab, uncheck Enable Direct3D video acceleration:
... and click OK. Quit and restart the QuickTime Player prior to checking to see if the settings change has had any effect.

Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
http://www.apple.com/support/systemstatus/

Hi, I have a brand new imac which i got today and when I open Iphoto all i get is the error message "Your photo library is either in use by another application or has become unreadable" any ideas? thanks

Hi, I have a brand new imac which i got today and when I open Iphoto all i get is the error message "Your photo library is either in use by another application or has become unreadable" any ideas? thanks

Are there photos in the Library? If not then just trash it and launch iphoto. It will make a new one.
If there are pics in it then Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I'd still like some help on this: Accessing menus is very slow unless I'm in safe mode. And I've tried everything I've found on the help pages.

If I go in using safe mode the menus work fine. If I don't the time it takes to get the sub-menu is several minutes. I've tried "disabling the add-ons" and "resetting the controls" but that doesn't affect it. It is still slow if I'm out of safe mode. I've also tried uninstalling and reinstalling it. And I've tried deleting the "Program Files" directory it occupies in-between uninstalls and installs, too. I've also tried getting rid of Firefox and the Mozilla Maintenance Service at the same time, too, just in case. Nothing works.
I get the following error if I look at "the console": mutating the Prototype of an object will cause your code to run very slowly; instead create the object with the correct initial Prototype value using Object.create
resource://gre/components/steelApplication.js Line 783
And I've tried looking at all the other forum posts complaining about this "mutating the prototype of an object" error.
Any suggestions would be appreciated.

I had this problem for about a year or so. I can't remember how long I had it. I just began using safe mode all the time, so I could still use Thunderbird. I had already tried what Christ1 had recommended, too ("You can try to disable all extensions and then enable one at a time until Thunderbird starts getting slow again.").
Then one day fairly recently the problem just disappeared. I didn't do anything. I'd been upgrading Thunderbird regularly, all during the time I had the problem, too. And I'd already tried all the various solutions that had been offered on the web. It just magically disappeared one day. Oddly, I was kind of expecting that would happen. I'd just wanted it to work a lot sooner.

My bonjour service is disabled, it says to uninstall and reinstall my itunes, won't I loose all my music?

Hi, I want to share music from my ipod touch to my ipod classic but it says my bonjour service is disabled. When I go to help it says to uninstall and reinstall my itunes. Won't I loose all my information and music?

No. Removing and re-installing iTunes has NO affect on the content that is stored in your iTunes library. Use the steps in this article to help you remove and re-install iTunes.
http://support.apple.com/kb/ht1925
B-rock

About 5 days ago my mozilla stopped working. It starts to open but all I get is a white page. I have tried uninstalling and reinstalling and still nothing.

Firefox opens a window but the page stays white. It will not load.
== This happened ==
Every time Firefox opened
== about 5 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3; .NET4.0C)

Same problem here - I solved it by un-installing and re-installing.
If you open the error console (Ctrk-Shift-J) it will bring up three error messages - I should have copied them - these might be useful to the development staff.

When I open Nightly all I get is a small black window that says close firefox

I have Nightly installed on a laptop using Windows 7. I have been using it for nearly a year. This afternoon, when I tried to open Nightly, all I got was a small black window saying "close firefox." I used Chrome to get on the web, downloaded the most recent version of Nightly and tried to open it. Same thing happened. How do I get Nightly back?

Any particular reason that you use the ''(sometimes unstable)'' Nightly version, rather than a stable Release version of Firefox?
Nightly isn't intended to be "used", but rather for users to help the Mozilla developers by "testing" each new build and then reporting any Bugs or 'glitches' they may find. Nightly is between 12 and 18 weeks from the release of a new version of Firefox - the Alpha 1 stage which is 6 weeks in duration.

My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

When trying to access itunes store all I get is a white page with word itunes store and never access the store. Is my computer blocking access?

When trying to access itunes store all I get is white with word itunes. This is recent issue. Is my computer blocking access?

With those symptoms, I'd check the following document:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store

HP Support Assistant - Uninstalled and Reinstalled - Now it won't Work at all!

My HP Support Assistant was sticking on Creating Restore Point. Well, I followed your instructions for this that was posted in numerous other threads and uninstalled HP Support Assistant and re-installed it, and now it won't do anything. It opens up and the NEXT button is not highlighted so if I click on it nothing happens...it's totally worthless now. What can I do to make it work again??? HELP!! (see image below - all I can do is minimize, enlarge or close that screen. NEXT button does nothing!)
My computer is only 1 year old and I run Windows 8 - 64 bit. Never had a problem with it before, but tried the Tune up and it was stuck on the restore point, so I followed your instructions, re-booted after un-installing and uninstalling, now it won't do anything. I also tried restoring HP Support Assistant from the Recovery Manager and it's still doing the same thing - nothing. How am I supposed to get my updates now???
I have an HP Pavilion p6 2310. I haven't installed Windows 8.1, it's just Windows 8. Thank you.
This question was solved.
View Solution.

Never mind...I fixed it myself. I did a System Restore from the point before I un-installed and re-installed HP Support Assistant yesterday and now it's working again!!

At the moment i'm trying to uninstall and reinstall firefox because when i open it all i get is a white page. But when I go to uninstall it it says that firefox is still running yet it isn't. Iwould just like some help on this please

Similar Messages

Maybe you are looking for