At the races on bt vision?

What's the chance's of bt adding any racing channels to the service?

At the moment there are no plans to have racing programmes such as horse/dog or car/motor added, however ESPN has got DTM racing and FIA GT1 races.
DTM:
A series of 10 races running April to October. Created in Germany, the DTM features German touring cars racing at circuits across Europe and Asia. ESPN will carry the races live where stated.
BRANDS HATCH QUALIFYING ...... SATURDAY 4 SEPTEMBER 19:00 NOT LIVE
BRANDS HATCH ........................ SUNDAY 5 SEPTEMBER 12:45
OSCHERSLEBEN ........................ SUNDAY 19 SEPTEMBER 21:45 NOT LIVE
FIA GT 1
NURBURGRING CHAMPIONSHIP RACE... SUNDAY 29 AUGUST 18:30 NOT LIVE
ALGARVE CHAMPIONSHIP RACE ......... SUNDAY 19 SEPTEMBER 23:45 NOT LIVE
SF (Superleague Formula)
TBC RACE ONE ............................... SUNDAY 5 SEPTEMBER 10:45
TBC RACE TWO & SUPERFINAL ........ SUNDAY 5 SEPTEMBER not live 17:45
ESTORIL RACE ONE.......................... SUNDAY 19 SEPTEMBER not live 13:30
ESTORIL RACE TWO & SUPERFINAL .. SUNDAY 19 SEPTEMBER not live 01:15
MONZA RACE ONE ........................... SUNDAY 3 OCTOBER 10:45
Thanks,
Stephanie
Stephanie
BTCare Community Manager
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Errors in building the RAC

hi all,
I am facing many issues installing the RAC 11g database with openfiler and filesystem ocfs2 and ASM
plz plz help me out from this issue i was struggling with this from couple of days
1)i have succesfully installed EL 5 on 2 nodes and openfiler in a node
and by the way i am using the hunter document as my guide installed the above mentioned as per the doc at http://www.oracle.com/technology/pub/articles/hunter_rac11gr1_iscsi.html
2)i have succesfully done the logical partitions of the openfiler external harddisk which even showed me the partitions as example
Disk /dev/dm-2: 38.8 GB, 38822477824 bytes
255 heads, 63 sectors/track, 4719 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-2 doesn't contain a valid partition table
3) The issue is tht when i want to configure the iscsi volumes from the RAC node prior to that i must issue a command to discover them from my rac node with the command
iscsiadm -m discovery -t sendtargets -p openfiler1-priv(which should show me the volumes but it isnt)
4)And that when i do a service open-iscsi restart from openfiler system i am getting as
[root@openfiler ~]# service open-iscsi restart
Stopping iSCSI initiator service: iscsiadm: can not connect to iSCSI daemon!
iscsiadm: exiting due to configuration error
[ OK ]
iscsiadm: can not connect to iSCSI daemon! [ OK ]
iscsiadm: exiting due to configuration error
[ OK ]
I have clearly explained all the things i have done so plzzzzz help me out from this which i am struggling from couple of days
waiting for an early reply
thnks
david

yeh this is ramu, working with david itself.
the contents of the /etc/ietd.conf as follows
[root@openfiler init.d]# cat /etc/ietd.conf
# PLEASE DO NOT MODIFY THIS CONFIGURATION FILE!
# This configuration file was auto-generated
# by Openfiler. Please do not modify it.
# Generated at: Wed Jun 4 0:33:47 IST 2008
Target iqn.2006-01.com.openfiler:rac1.crs
Lun 0 Path=/dev/rac1/crs,Type=fileio
Target iqn.2006-01.com.openfiler:rac1.asm1
Lun 0 Path=/dev/rac1/asm1,Type=fileio
Target iqn.2006-01.com.openfiler:rac1.asm2
Lun 0 Path=/dev/rac1/asm2,Type=fileio
Target iqn.2006-01.com.openfiler:rac1.asm3
Lun 0 Path=/dev/rac1/asm3,Type=fileio
Target iqn.2006-01.com.openfiler:rac1.asm4
Lun 0 Path=/dev/rac1/asm4,Type=fileio
# End of Openfiler iSCSI configuration
lvscan
pvscan
vgscan are alos working fine
but still we are not able to find the records form the openfiler and racnodes
the msg shown form openfiler
[root@openfiler init.d]# iscsiadm -m node
iscsiadm: can not connect to iSCSI daemon!
iscsiadm: exiting due to configuration error
and the msg from both the rac nodes
[root@linux1 iscsi]# iscsiadm -m node
iscsiadm: no records found!
[root@linux1 iscsi]# service iscsi restart
Stopping iSCSI daemon: /etc/init.d/iscsi: line 33: 5141 Killed /etc/init.d/iscsid stop
iscsid dead but pid file exists [ OK ]
Turning off network shutdown. Starting iSCSI daemon: [ OK ]
[ OK ]
Setting up iSCSI targets: iscsiadm: No records found!
[ OK ]

What hapenned to the MJPEG codec in Vision 2012 SP1?

NOTE: This discussion is about the 64 bit version of the Vision toolkit!
NI has re-vamped its AVI functions in the latest Vision toolkit (2012 SP1). At first glance, the new AVI functions work fine. At least the 64 bit version now has a wider selection of codecs to choose from (see this old bug that caused issues with codecs in prior versions). However, something strange has hapenned to the codecs!!!
Prior to SP1, I used the "MJPEG Compressor" codec. Honestly, I know nothing about this codec except that it provided the best compression. I don't even know if its a Microsoft codec, or is provided by NI. But with that codec, I could get a smaller AVI file without compromising too much on image quality. I typically used Quality=700.
However, with SP1, that codec is gone! It appears to have been replaced with a codec named "Motion JPEG (NI Vision)". And now I can't specify the quality! Apparently, none of the "NI Vision" codecs allow you to specify the quality. Wow, what a pain!
After reviewing all the available codecs, "Motion JPEG (NI Vision)" is still the best option compared to the others. But now I can't change the Quality! This basicaly means that its actually BETTER for me to use older version of the Vision Toolkit.
Can I get a response from NI on this issue? Assuming that is the same old MJPEG codec as before, why was the "Quality" parameter removed for it?

Greetings, Josborne;
While I do not know whether the MJPEG Compressor or the Motion JPEG (NI Vision) codecs are actually the same, it would seem that the 2012 SP1 readme does mention the fact that the compression inputs in Codecs installed by the Vision Development Module will not have that Quality input (under the Known Issues section)
http://download.ni.com/support/softlib//vision/Vision%20Development%20Module/2012SP1/readme.html
I will thus inform myself as to what might be going on there and as to whether that might or not be changing.
Cordially;
Simon P.
National Instruments
Applications Engineer

What was the point of the race to infinity???

Why did BT bother with the race to infinity when exchanges that placed near the top will never see infinity, yet exchanges of a similar size that placed near the bottom are getting upgraded within the next few months. It was just a cheap trick to get peoples hopes up when they had no intention of listening to what people wanted.

angry2011 wrote:
So what about other exchanges that placed in the top 50? My exchange was up there yet I have been told I will never see a fast speed, yet a similar sized exchange that only got 81 votes in the race is due to be upgraded. How does that work?
Are you talking about your exchange or your local cabinet
toekneem
http://www.no2nuisancecalls.net
(EASBF)

Need to shutdown GG process if 1 node of the RAC is shutdown?

if only 1 node of the 2-node RAC cluster is shutdown, Does GG have to come down as well or can it run against the 1 node that is up.
Thanks

Apologize for wrong answer to this post, due to site network issues wrong page was opened, hence wrong answer was posted earlier.
Hi,
If one of the node is down, OGG Extract also breaks down as it is unable to process that particular redo thread. As you are aware, in a RAC environment, the Extract process uses threads, one for each redo thread in the RAC cluster.
Hence the only way to restart the Extract is to exclude the node(redo thread) by using THREADOPTIONS PROCESSTHREADS EXCEPT <thread spec>.
Example: THREADOPTIONS PROCESSTHREADS EXCEPT 2
Extract threads are mapped to redo threads, so while excluding the thread please verify the mapping correctly and exclude the right thread.
SQL> select distinct THREAD# from gv$log;
Caution: Excluding any of the Extract threads from being processed excludes that data from being synchronized with the target tables.
Once the node is back online, you could comment out the above parameter in the Extract parameter file and restart the Extract to process all the redo threads in RAC.
Hope this information helps.
Thanks & Regards
SK
Edited by: Santhosh on Aug 2, 2011 9:51 AM

How can i do the RAC with Oracle 9i ?

How can i do the RAC with Oracle 9i ?
The Oracle 9i has a RAC(Real Application Cluster)module , please who can tell me how can i let it working .
Which hardware the RAC need's
Thank All ,
[email protected]

That is right you need atleast 2 boxes. The two servers will use the same hard disks.
The concept is an extension of OPS(Oracle Parallel Server).
Basically, you install Oracle Server Software on both the boxes, One database will be shared by both the servers. You can access your database through the Server1 or Server2. If Server1 fails then the Server2 will take over all the connections. You can add or remove any servers to and from the cluster any time you want with out impacting your production.
They share load, reliable, scalable....

How to QA the RAC setup

hi ,
EBS R12.1 + RAC
OEL 5.4
We have just outsourced(thru Oracle local support) the installation/migration/conversion of our EBS R12.1 from single node to RAC.
The setup/config is:
apps tier is on node1(apps2), and
the db tier (RAC) in on node2(rdbms1) and node3(rdbms2).
The support followed note 466649.1 in configuring/upgrading/migrating the EBS to RAC.
After that they showed to us that RAC was successfully configured, and also the PCP (parallel concurrent processing). The EBS apps is also running successfully connecting to the RAC db tier. The showed to us the apps "dashboard" that confirms everything set-up. This is the screen shot of the dashboard.
http://rapidshare.com/files/419559694/RAC_setup.JPG
Applications System Status
Host      Platform           Host Status      Admin      Database      Concurrent Processing      Forms      Web
APPS2      Linux x86-64 (64-bit)      check          check     blank          check               check     check
RDBMS1      Linux x86-64 (64-bit)      check          check     check          check               check     check
RDBMS2      Linux x86-64 (64-bit)      check          check     check          check               check     checkWe are left to test and do some maintaining of the systems.
My question is, (since we do not have the capacity to QA the setup or validate, because we do not have experience on RAC).
Is the output of the dashboard correct?
What are the list of things to do or check when you maintain a RAC EBS SYSTEM?
Thanks a lot,
Ms K

Hi user;
Please check below notes
RAC: Frequently Asked Questions [ID 220970.1]
RAC Assurance Support Team: RAC and Oracle Clusterware Starter Kit and Best Practices (Generic) [ID 810394.1
Regard
Helios

How to list the rac databases on unix terminal

Hi guys, I am trying to find out how to list all the rac databases on the unix terminal.
the following command gives the list of all the databases running on a server
*'ps -ef |grep smon | awk '{print $8}' | awk -F"_" '{print $3}''*
of those databases i am trying to find the all the databases which are rac enabled.
I tried srvctl status database -d 'database name'
but with that i could find info on only one database at a time. So I am looking for a single command that lists out all the rac databases at a single go.
can someone please help me figure out that command
Thank You

Try:
srvctl config database

Could not connect to the RAC node

Dear all,
I've setup an Oracle RAC on 2 nodes(Windows Server 2008) with iSCSI as storage. Currently I'm trying to verify the availibility of RAC using the following situation: Reboot the first node and and at the same time connect to the RAC using the VIP of that node. But I get the following error.
"The Network Adapter could not establish the connection"
My assumption is that the connection request'll be redirected to the 2nd node. But that doesnot happen. Could you please explain the situation.
Regards
KRA

Dear Uwe Hesse,
Have you configured connect time failover in your tnsnames.ora?
Else the error is to be expected.
Show us the tnsnames.ora part for the connect descriptor you use for the connect, please!This is the connection descriptor used for testing failover :
jdbc:oracle:thin:@(DESCRIPTION =
(ADDRESS_LIST =
     (failover = on)
     (ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
(CONNECT_DATA =
     (SERVICE_NAME = orcl.domain_name)
     (FAILOVER_MODE = (TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))
And that for evaluating performance of RAC is
jdbc:oracle:thin:@(DESCRIPTION =
(load_balance = on)
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = RAC1-vip)(PORT = 1521))
     (ADDRESS = (PROTOCOL = TCP)(HOST = RAC2-vip)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = orcl.domain_name)
Edited by: KRA on Jul 25, 2011 5:14 PM

How to find which instance in the RAC cluster the application is connected

How to find which instance in the RAC cluster the application is connected to ?
Raees

well if you know the user through which your application is connected to instance, you can easily find out by querying gv$session view.
select inst_id,sid,serial#,program,username from gv$session where username is not null;
Thanks
Gaurav

HT201272 I'm trying to buy some gold and money for one of the race games but they said contact i tune

Imtrying to buy some gold and money for one of the race games but they said I should contact I tune

Welcome to the Apple Community.
Did you follow the instructions in the message and contact Apple, which you can do through iTunes Store Support. If Apple have asked you to contact them, then the issue can only be resolved by them.

The next gen BT Vision HD box - 2012

Hi,
The next generation BT Vision HD/Youview box is planned for release in 2012. Thats good news for everyone.
But there has been some debate on this forum as to the nature of what form this box will take and what services it will offer.
I have debated it will offer Freeview HD viewing and recording facilities (basically a Freeview HD PVR) with additional IPTV streamed live HD TV channels.
Others have debated no, it won't. The HD element/HD TV channels will be purely offered over BTs new up-coming super-duper future CDN multicast internet network. That is, pure IPTV HD, where the new box will NOT include a Freeview HD PVR.
Now, after reading the two articles below, it might be true. Or if not true, possible...
http://www.theregister.co.uk/2011/05/30/bt_to_embrace_iptv_during_broadband_network_upgrade/
“It’s too expensive renting DVB-T multiplex space to deliver Sky Sports to BT Vision customers, so we want to send it multicast.”
"That would mean an almost unlimited number of IPTV TV channels could be launched through BT, all of them with a signal good enough to show on a connected TV screen, indistinguishable from broadcast TV quality, up to HD and beyond".
And if it is, Opps for TopUpTV...
http://gonedigital.net/2011/05/30/bt-goes-multi-cast-%E2%80%93-awkward-for-topuptv/
Internet TV Multicasting -
"That’s much more efficient, which in turn means more channels can potentially be offered that way too. Upgrading their network to multi-cast can save BT money on the broadcasting of Sky Sports, without compromising the quality – it may even increase it, given how squeezed pictures are on Freeview at times. And it also makes it much easier for them to offer extra live channels too, so they can fight harder against Virgin and Sky, which may bring increased competition in pay TV around the UK".
So, a Youview box on the Youview platform, offering a Freeview HD PVR with HD IPTV on any multicast ISP you choose to use, or...
A next gen BT Vision pure IPTV HD TV box that will give you access to all the other Youview services.
If the above is true, that could be a difficult choice...
Thoughts anyone?
Rank - Mostly Harmless.

I think the key to this is this part of my first post -
Internet TV Multicasting -
"That’s much more efficient, which in turn means more channels can potentially be offered that way too.
Upgrading their network to multi-cast can save BT money on the broadcasting of Sky Sports, without compromising the quality – it may even increase it, given how squeezed pictures are on Freeview at times.
And it also makes it much easier for them to offer extra live channels too, so they can fight harder against Virgin and Sky, which may bring increased competition in pay TV around the UK".
So BT will only have to buy the rights to show Sky Sports, without having to pay the millions it costs to rent two Freeview HD channels to show it. That should mean less cost to us, the customer. Thats got to be good news.
Say, Freeview SD Sky Sports 1&2 alongside IPTV HD Sky Sports 1&2. Maybe. Or would they just show it over the net?
As Guv said above, if your BB line were to go down... Oh Err!
EDIT - Oh, another bonus I've just thought of - The millions BT will save could also bring with it improved content. Lets face it, that Film Club line-up really does need improving. And with a few HD films thrown in too.
Rank - Mostly Harmless.

What are the RAC DBA daily tasks?

Hello Experts,
What are the RAC DBA daily(routine) tasks?
Thank you.

Hi Friend,
Good Query..
1. Make sure that all database instances are available.
Log into each instance and run daily
2. Checking CRS status
bash-3.00$ ./crs_stat -t
3. Checking Volumes Informations in each instances.
bash-3.00$ df –h
4. Verify success of database backup:
a. RMAN backup/Data Pump Backup/Cold backup
5. Check the Archive Log file locations in each instance
6. Check the Archive Log file location volume sizes in each instance
7. Check Alert Log files (Any ORA_600, oRA_07445 etc..) in each instance
8. Check the Statspack / AWR Report Peak hour reports
9. Check the ASM INSTANCE status in each instance
10. Check disk groups space and limitation
11. Always use EM and ADDM reports for performance health checks and analysis
12. verify the DR sync (if applicable):
13. If DR site is available :
a. Check to determine if latest archive logs have been applied to the database by looking at the alert
log file for the standby(DR) database.
14. Review contention for CPU, memory, network or disk resources:
a. Work with system administrators to develop methods to review contention for these resources.
15. Maintain Complete Database Details (Data Files locations, Control file locations, Redo Log file Locations etc...)
a. If any changes in production database or DR-Site database update manuals.
16. Check OCR and VD backup locations. (If possible take manually OCR and VD backup)
17. Check CRS logs in each instance
18. Check Listener Logs in each instance
19. If you are using RMAN backup, Use both the instances while taking RMAN backup (Multiple Channel allocations in Instances)
20. Weekly restore the RAC backup in Single Instance Database (If RAC setup is not available)
Hope it helps....
Thanks
LaserSoft

Who has started the RAC db

Hi,
I just have installed a RAC database (Oracle 11g) with two OEL servers using NFS. After the installation, I didn't configure the dbstart.
Reboot the machines. The RAC database is also started !!! Who did it? OCR?

All the database and instance information (including Listeners, ASM) are stored in the OCR. These are started as part by CRS as an application resource.
You can also manuallys start them using crs_start or SRVCTL utility and stop them using CRS_STOP or SRVCTL utility.
Hope this answers your question

Error while saving the added the element in HumanResource Vision Enterprise

Hi All,
In 12.0.4 ,while saving after creating the element in the Human Resource Vision Enterprise it error out with error code APP-PAY-51520.
Thanks&Regards
DBA

Have a look at [Note: 260136.1 - Cannot Create an Element in the Canadian Legislation, Error:APP-PAY-51520|https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260136.1]

At the races on bt vision?

Similar Messages

Maybe you are looking for