At the start-up COMMAND-LINE interface ( :/ root# ) asking someting i don't

*Please Help!!!*
i was on the net at a safe website, then my computer froze couldn't use OptionControlEscape to close the browser or other apps; so restarted the computer by holding the power button, when it came back after a long wait A BLACK SCREEN WITH COMMANDS TO ENTER: later i found out it called COMMAND-LINE INTERFACE appeared asking:
*DARWIN USER LOG IN:*
PASSWORD:
i didn't know what it was, i inadvertently, hit the RETURN key
ever since i try to start the computer the same COMMAND-LINE written:
:/root#
What ever i did, couldn't pass this point, it keeps returning the same:
:/root#
I read and tryed to fix it by fsck by typing
*/sbin/fsck -fy*
but had to type it after the :/root# which i couldn't get rit of it. And when i hit the return ket same :/root# line was returned to me...notjing was fixed.
i can't find my system cd, so from the things i have read at the *apple support site*, i should be able to fix it by starting up in *SINGLE MODE* then using the COMMAND-LINE and typing */sbin/fsck -fy* and hitting the RETURN-KEY should repair the disk...but it can not get rit of the :/roor# line...it keps returning this:
:/root#
I KNOW I AM CLOSE TO FIXING IT, PLEASE HELP ME.
THANK YOU SO MUCH.
Message was edited by: ErikEren

sHyLoCk wrote:Did you change your runlevel to 5 in inittab? Or are you starting kdm as a daemon?
# /etc/inittab
# Runlevels:
# 0 Halt
# 1(S) Single-user
# 2 Not used
# 3 Multi-user
# 4 Not used
# 5 X11
# 6 Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
x:5:respawn:/usr/bin/kdm -nodaemon
#x:5:respawn:/usr/bin/slim >& /dev/null
# End of file
AEMONS=(syslog-ng hal network cpufreq crond alsa fam apcid)

Similar Messages

Can I use the Command Line Interface on Unix?

Hi,
We use 9iAS on Unix. We want to use Discoverer Command Line Interface on unix to export the worksheet query result. Can anyone know how to do this? I couldn't find out the command similar to dis5usr.exe for windows version.
Thanks.
Richard Qiu

Hello Richard
You can use the Discoverer EUL Command Line for Java utility. This was released with Discoverer 10g (9.0.4).
Please refer to the documentation for more information on how to use this command line interface: 'Oracle Discoverer EUL Command Line for Java User's Guide 10g (9.0.4), Part No. B10274_01 (PDF)' The document is available from OTN at http://otn.oracle.com/documentation/discoverer.html
Regards
Discoverer Product Management

To run an application on iAS6sp1 on HP-Unix, while starting the kjs from command line, it gives a GDS error and crashes. Subsequently, after stopping all services and restarting iAS wouldnot come up.

Hi,
Not a problem, please post the KJS error logs for me to hunt the
exact reason for the error.
Thanks & Regards
Raj
Neel John wrote:
To run an application on iAS6sp1 on HP-Unix, while starting the kjs
from command line, it gives a GDS error and crashes. Subsequently,
after stopping all services and restarting iAS wouldnot come up.
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base!

How to get the command line interface for WRT160NL router

hi,
How can I get the command line interface for WRT160NL router. please suggest.

If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

Where is the command line interface in DW CS3 on a Mac?

I have seen other forums where they instruct you to use the command bar or command line interface to set permissions and what not, but I do not see where that might be in Dreamweaver CS3 on a Mac. Can someone assist me in locating this feature?
Thanks in advance,
Todd Temple > T2 Design

There is no command line interface in Dreamweaver. It's a tool for editing web pages.
However, you can use Dreamweaver to set the permissions on web pages on your remote server like this:
In the Files panel, select Remote view from the drop-down menu at the top right.
Select the file(s)/folder(s) for which you want to change the permissions.
Right-click and select Set Permissions from the context menu.
Set the permissions in the dialog box that opens.
As the dialog box warns you, this command does not work on all servers. If your remote server won't allow you to change permissions through Dreamweaver, you need to log into your hosting company's control panel, and change the permissions there. If you don't know how to do it through the control panel, ask your hosting company for help, as the method depends on the control panel used.

Can I create a new folder using the command line interface

Hi.
Is there a way to create a new folder in an existing business area, from the command-line?
We have an application that provides an interface for the user to create a table and load flat file data into the table. After loading the data, the user will verify the loaded data using discoverer. If there is a command line interface to create a new folder, then the script that created the table can also call the discoverer command line to create a new folder for the new table. Is this possible?
Thanks

Hi,
I think I am having a similar question here. I am using Oracle 10g on Windows xp.
I logged in to Oracle from command prompt. I used command create directory myFunDir as 'd:/funDir';. Oracle returns: Directory created. But I couldnt find the directory myFunDir! Where is it?
Thanks.
Newbie.

Newby question about command line interface

Arch is my first linux distro and havnt used others yet.
Just wondering, does Command Line Interface looks and functions all same on other distros?
Because, if u can chose desktop environment like KDE, GNOME and Xfce with other Linux distros as well, then what is difference between others.
Linux is still quite hard for me and just wanted to know if there is "special" stuff that arch can do.
To me, they all looks same with same desktop environment...
thanks

When you mention the "command line interface" (CLI) there are a few things involved: a terminal emulator, a shell, and the programs you have installed. That said, as far as running programs goes
The terminal emulator is the application that hosts/shows your shell. In KDE it's (by default) Konsole, GNOME uses gnome-terminal, others might use xterm, aterm, rxvt, rxvt-unicode or one of many others. Different emulators provide some extra features (e.g. tabs) and they all differ in memory usage, speed, and integration (or not) into a given desktop environment. That said, they all pretty much work the same for launching programs and operating in a shell: you type commands and press enter.
The shell is what runs your commands and also provides some scripting capabilities. Generally, bash seems to be the most used as a default shell. You can change your shell if you wish, as some shells provide extra features like programmable command completion. Other shells are lighter or more POSIX-compliant. For a starting user, you're well enough off just using the default (probably bash) until you find a reason for which you must have a different shell.
Finally, the programs installed will affect what you can run in a terminal. Different distros will have different quantities of programs installed by default. (Arch's base install is very minimal.)
Now, with regards to Linux, at the end of the day all distros are Linux with some desktop environment (DE) and some Linux apps. The DEs and applications are taken from the same source, but some distros provide patches for extra capabilities or configuation. However, if you see something you like in openSUSE, say, you can download the software, patch it, and configure your Arch to work like openSUSE. Each distro, though, has its own focus and philosophy which affects:
* how many and what applications are installed by default
* amount of configuration required after install
* stable vs. bleeding edge
You can read more about this in the wiki reference above.
So having said all that, Arch gives you a simple, minimal base install which you can then easily customize by app installation and configuration. It is reasonably bleeding edge, meaning application updates usually make it to Arch fairly quickly. With time and knowledge you can make Arch do near anything that another distro can do, but that's not really the idea behind Arch in my opinion.
Hope that helps,
j

Is their any command line interface to Oracle App server ?

Hi All,
I am basically from weblogic background and now started using Oracle Server
is their any command line interface to the Oracl application server?
Thanks
Raghavendra

Oracle Application Server is composed of two major parts
A - infrastructure
B - middleTier
each one has diferent components and as consequence different "command line" interfaces (for example, infrastruture as an oracle dabatase bound to it .. )
for each one of these two major parts you have a process that "manages" all other processes/components.
It's "Oracle Process Manager" -> OPMN
you can user OPMN and another command line interfaces to manage oracle application server.
Please Check Documentation, a good start point would be the "application server administrator guide" wich you can find in Application server documentation CD, or online in otn.oracle.com
Best Regards

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

If I understand correctly, you want to do the following:
1. Create one or more tab-delimited files that specify a series of query strings (that LabVIEW will send to your products) and expected reply strings (that LabVIEW will look for in response to each query)
2. Run your LabVIEW program (the test engine) and have it execute one or more test scripts from file using either TCP/IP or serial communication to your units under test
3. Track how many of the queries are met with the expected response, and output an indication of whether each step passed or failed
If this is close to correct, then I've attached a sample test file and LabVIEW VI as an example; I chose the TCP/telnet method because it allowed me to use the ni.com Web site to simulate my tes
t hardware. If you happen to own the LabVIEW Internet Toolkit, there's a VI called "Telnet Play Script" in the Telnet palette that does something fairly similar using TCP. The same general model would also work for Serial communications.
Hope it helps,
John Lum
Attachments:
test_engine.zip ‏24 KB

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a product through telnet or serial interface

Advice on constructing a test engine and formatting a spreadsheet test file to perform command line interface testing on a range of products through telnet or serial interface and output pass/fail results.

Hello j. smith,
TestStand gives you the ability to create "sequence files" which are lists of tests to be run sequentially or in parallel. These tests can be written in any language: LabVIEW VIs, C/C++ DLLs, EXEs, ActiveX objects, .NET Assemblies, etc.
You can run your TestStand sequence files from a command-line prompt using the following syntax:
\bin\SeqEdit.exe" /quit -run
This will launch the TestStand Sequence Editor (and optionally prompt you for TestStand login information if you have this configured), run your sequence file, then exit.
If you're using the TestStand process model, it can output your results to a report file or database if you configure this. To use a TestStand process mo
del to execute your sequence file, use the following syntax:
\bin\SeqEdit.exe" /quit -runEntryPoint
Here's an example:
C:\>"C:\Program Files\National Instruments\TestStand 3.0\bin\SeqEdit.exe" /quit -runEntryPoint "Single Pass" "C:\Program Files\National Instruments\TestStand 3.0\Examples\Demo\C\computer.seq"
Note that multiple sequences and sequence files can be specified on the command line.
TestStand supports remote sequence execution using DCOM (Distributed COM), which is an east way to remotely execute tests. But as for running tests or commands through a telnet or serial interface, you would have need to check Windows documentation on how to execute command-line remotely like this.
David Mc.
NI Applications Engineer

How do I create a "command-line-interface" for a game?

Hey people,
For a game I need to make a DOS-like command-line-interface where the user has at least 3 options to answer with, does anyone know how to go about this?
Hope someone here can help me out!
Kind regards,
Angela

I'm not sure what part of this you are having difficulty with. Imagine for a moment that instead of asking for your end user to type something into a text-entry field and to monitor what they type (perhaps when the ENTER key is pressed), that instead you provide 3 buttons on your stage. Responding to a button press in this scenario is much the same as responding to typed user input - your movie does something based on user interaction. Going back to the user entered text scenario, a text or field sprite can detect the ENTER key being pressed and examine the string the user has entered, something like:
on keyDown me
if _key.keyCode = 36 then
    stopEvent
    sText = sprite(me.spriteNum).member.text
    case sText of
      "hack": -- do whatever you need to here
      "research":
      "wait":
      otherwise:
    end case
else
    pass
end if
end

Oracle VM Manager Command Line Interface

Can anybody suggest any tool for Oracle VM Manager Command Line Interface?
Are they free?
What kind of jobs we can automate using Command line?
If they are not free is it worth spending money to buy them?

Try public-yum.oracle.com
and look at the oracle-addons channel below OEL.
http://public-yum.oracle.com/repo/EnterpriseLinux/EL5/oracle_addons/i386/
Regards
Sebastian

-info XML format for Compressor's command line interface?

Hi Everyone,
I've got a brand new copy of Final Cut Studio HD that I'm using for an encoding project. I'm trying to figure out how to use Compressor's command line interface. I want to give it a MPEG-2 file and a .scc (closed caption) file. I can see how to specify the source file, but I'm having trouble figuring out how to specify the SCC file. As best as I can understand, I'm going to need to use the -info <XML> option, but I haven't found any documentation for this. Can someone point me to the appropriate documentation?
Thanks!
- Kevin

I get an error when I do exactly what you suggested. My problem is not if the XSU is able to locate the xml file because I know it is able to parse it since it picks up an error in it such as if I make the "ROW" element "row" - ie small caps instead of big which is not recognised by XSU. I use the url of the xml file as specified when I open the xml file in internet explorer. The XSU does confirm it inserts the document successfully with my original command but the document simply doesn't get inserted into the table. Specifically, if anyone is to insert the xml file I have shown in Oracle, how would it be approached successfully?
Your help is very much appreciated.

Command Line Interface

Hi all,
I am trying to write a program with a command line interface and I am running into a few problems.
I read the commands issued by the user as :
BufferedReader in = new BufferedReader(
new InputStreamReader(System.in));
String command = in.readLine();Question 1. Is this the right way?
Question 2. I have to read a password from a user. How do I stop the echo of this password (or change the echo to something like *)? Is it possible to do that from a Java program?
Question3. While the user is typing a command, the system wants to output a message. This jumbles up the echo of the command the user was typing. So I need to show the message from the system on a new line, and then again show the command the user was typing .. or something similar which keeps the whole thing neat. How do I do it?
Some of these requirements might not be possible to implement because of the inherent limitation of the command line interface. :-)
Please help me with this.
Thanks,
Binil

I raised this issue also in another thread.
Actually I am pretty p.o. This issue pops up over and over again but the people at Sun systematically deny the problem and simply do nothing about it. I know, it's not as interseting as EE, 3D graphics or Swing, but it is asked for by many peaople over and over again.
I simply don't understand what is so difficult in the method:
System.in.setEcho(boolean) or System.in.setEcho(char)
Your solution will work, but it is not platform-idependent. That os what Java is all about or am I wrong?
hi,
yah thatz the correct way to read things typed
typed in the command prompt. Am not sure whether you
will be able to mask the character typed to show a *
(but i supoose itz not possible). If you are going
to do any CLI have a look at JNICurses library
available at
http://home.att.net/~psantoro/jnicurses/jnicurses.html
hope that was useful.
cheerz
ynkrish

Command line interface to Crystal? Batch job to refresh report data?

Hi All.
I have some users who do certain work and then want to print an updated report. However they only have the report viewer. As they work at night, they can't ask me to refresh the report.
Is there a facility to schedule jobs like this in Crystal?
Is there a way to create a batch job that will automatically refresh the report?
Is there a command line interface to Crystal?
Has anyone got a suggestion for some other means of solving my problem?
Thanks.

are you using crystal enterprise as your portal? that has a scheduler.

At the start-up COMMAND-LINE interface ( :/ root# ) asking someting i don't

Similar Messages

Maybe you are looking for