AT THE TIME OF CRETION OF BP IN CRM HOW GET COUNTRY CODE ATUMATICALY DISPL
hello friend my requirement is at the time creation of bp in crm with instead of manually selection in country code system want pick automatically and display as a display field (not editable to change)
HOW IT IS POSSIBLE and what are things need to do this.
if any one knows please reply
bindhu
Hi Bindhu,
1. You are able to see country field populated by default since for your user the parameter LND has been set to a default value.
To check the same go to transaction SU01, put your username and enter. Select tab Parameters, in column Parameter Id there must be an entry for LND and default value must be assigned to it.
You can also see the same in System-> User Profile --> Own data.
2. The field is in display mode because of field groupings.
In transaction SPRO
SAP Implementation Guide -> Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings
For one of the option here Address: Country must be set to display. e.g Configure Field Attributes per Activity
Here choose Create, for dataset Addresses, field group Address: Country must be set to display. If not check in others.
If the above 2 are not found, even Badis can be responsible for the same.
Wish this helps.
Regards,
Shalini Chauhan
Similar Messages
-
Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?
Itunes writes off $ 1 each time they connect to the internet. Shopping at the time was not. For what? How do I know?
-
Our version of ID saves all files with the time/date of December 31, 1999. How do we fix this?
That's interesting. The file date should match the system date. What's the system date? What version of InDesign? What operating system?
-
I have bought a new computer and backed up off time machine backup now I cannot open photoshop get error code 150 30 help appreciated.?
Have you updated your iTunes on your computer? WIth a device running iOS7, you need iTunes 11.
When you removed iTUnes, did you see something named 'apple mobile device support' or something like it? (The exact name varies from operating system to operating system). If you see that, uninstall it too. That's the drivers for your iPhone and they should self-install when you plug your device in.
If all that is fine, have you checked your cable and USB port? a malfunctioning cable can keep you from syncing. -
When sharing through the export media option as pro res 422 i get error code 108
when sharing through the export media option as pro res 422 i get error code 108 and message saying could not complete because an error occurred when encoding frame 3297 - error 108!!!
what is this frame...is it a jpeg file i have imported...how do i locate it... its a 40 minute movie and it will share to dvd just wont let me create a quicktime .mov file... any suggestions.What frame rate is the project? Divide the 3297 by the frame rate to get an approximate location? What are the specs of the media at that location, video and audio?
-
My mac book was incredibly slow. When I went to Mac store, they asked me to reinstall the OS with CD and not with the time machine. I reinstalled the operating system. But when I opened the applications, all those started as fresh applications as usual. I have the backup of all other data in another hard disc. But unfortunately, I forgot to copy the photos before reinstallation. I have those photos in my time machine back up. But when I opened time machine, it started like a fresh (very new) time machine and it started backing up my present OS (the reinstalled one). I cannot open the previous time machine, which is in the same hard drive. I wish to open the previous time machine to get the photos which are backed up previuosly. When opened the time machine disc (manually by clicking the icon), i can see all the thigs which I had previously in my macbook. But unfortunately, i cannot access those through time machine! Can anybody help me please?
How to redownload purchased apps from the App Store
-
TS2655 imac can no longer find the time capsule to add it...how do i fix this
my imac can no longer find the time capsule....i had to delete the old network and re add the time capsule to create a new one and now the imac keeps searching for the base and cant locate it
If you mean that Time Machine can't find the Time Capsule, I'd try using the Time Machine panel of System Preferences to redeclare your backup disk. If that's not what you mean, please explain.
-
Set the time interval when BPM read e-mail to get offline adobe forms
Hi masters
Do you know where I can set the time interval when the BPM read the e-mail account to get the off-line adobe forms received ? I think it is 10 minutes but I need to change to 1 minute.there is a config attribute
-
ITunes asks me all the time when i Want to restore my iPhone 4s a code to unlock my safety
I did something wrong and When I wanted to restore my iPhone itunes asks me al the time the password to unlock my iPhone's backup and I try I'd password, my iPhone's id etc and it doesn't work and I dont know what to do And now I'm stuck and cannot use my cell at all?
please help meMachiah wrote:
I did something wrong and When I wanted to restore my iPhone itunes asks me al the time the password to unlock my iPhone's backup and I try I'd password, my iPhone's id etc and it doesn't work and I dont know what to do And now I'm stuck and cannot use my cell at all?
please help me
It sounds like the problem is you have forgotten the password for your password-protected backup. See: iOS: Troubleshooting encrypted backups - Apple Support -
I want my fan to run all the time on power adapter, any guru know how?
After buring out one hard drive, and getting tired of hauling a mini-fan and 1/2" foot spacers around with me between motels, I want a way to force the powerbook fan to run at full speed all-the-time when the powerbook is connected to a/the power adapter. Anybody out there know of a "patch" / "script" / "shell add-on" that will do this on 10.2.x?
Trust me, you don't want to do this. That's not how they are designed to run. If your machine is overheating, consider this article:
http://docs.info.apple.com/article.html?artnum=30612
And perhaps a notebook cooler, like this one by Antec. And when get back home, run the hardware test that came with your machine:
http://docs.info.apple.com/article.html?artnum=86178
If your machine is under AppleCare, I would take it in for service if any issues are detected.
Also note if your battery is under the battery exchange program:
http://support.apple.com/batteryprogram/ -
Hi Support team,
I am facing multiple issue while using orkut on mozilla firefox 3.6.13.
I have windows 7 ultimate edition installed on my laptop.
First issue is while i using orkut in firefoz, most of the time chat window will not referesh (as webpage refresh) and all the contact of chat window will get disappear (blank) from there.
second issue is sometimes logout page will get disppear from webpage and that time we are not able to get there while refreshing the page also.
Please suggest...Well, the computer stopped starting up at all. It could never find the operating system. I tried safe mode and virtually every other non-standard start-up option. I then did target disk mode with another MBP and got the message: "The disk you inserted was not readable by this computer." I then tried using disk utility and it couldn't retrieve retrieve the data using restore (writing to an external drive). I suspect that this means the hard drive would need to be replaced. In your expert opinions, is this necessarily true? Could this still be just a software problem, or perhaps some other piece of hardware?
Part of the reason I ask is that this laptop is now nearly five years old. It's needed a new battery for two years. If it's a virtual certainty that the hard drive is toast, I don't want to pay $150 for someone to take it out and try to recover any remaining data from it, only to reveal that the data is indeed irretrievable (since the computer itself is probably only worth $300-400 at this point). The nearest Genius Bar is also more than 2 hours away. Am I going about this the right way by using disk utility, given that the hard drive won't mount to the desktop of the other computer? If the hard drive can't be reat in target disk mode, does that confirm that it is the hard drive?
Thanks
Oh also, it does still make the startup noise, even though I can't run the AHT since I can't get it to start up in safemode. I thought this mean that it passing various hardware tests. Does this not apply to the hard drive?
Message was edited by: Euain_ *add-on* -
Normally you would click on the time and it would toggle between hours and MM:SS format. Now it just stays as hours. Apple is just making it super hard to burn CD's at times just under 80 minutes.
Delete them and then download them from the desired Apple ID.
(98978) -
I uninstalled my iTunes because it would not update and I have not been able to update my phone. I was told my program was infected and to uninstall and then reinstall it. I am now getting error code 2203 when I try to reinstall it. This is the second time trying to reinstall. The first time it was reinstalled with the same problems I orginally had. I am running Windows 7. Any ideas? Thanks for any help.
Or....
For Mac OS X:
Step 1. Go to your “Applications” folder
Step 2. Go to your “Utilities” folder
Step 3. Launch “Terminal”
Step 4. Type “sudo nano /etc/hosts” (without quotes) and hit return
Step 5. Enter your password
Step 6. Use the down arrow key to find the “gs.apple.com” entries. Once the cursor is in front, make sure you comment out the line(s) by entering “#” (no quotes) in front of the text
Step 7. Save the file by pressing CONTROL+O on the keyboard
Step 8. Exit the nano editor by pressing CONTROL+X on the keyboard
Step 9. Restore your iDevice
Try that -
My ipad 3 has suddenly started draining battery in only a few hours. Even if not in use. Might this be because a programme is running in he background? I recently downloaded Dropbox. Might my photos still be downloading after a few days? How do I check? What do I do about it? Or might my battery be faulty? Thanks, Tim.
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A." The symbol between volts and amps is the symbol for DC. Do NOT use an iPhone charger. Do NOT use an iPod charger. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
At the time of Purchase order creation Material specification how to trace
Dear all,
I have an one issue,
when ever i am creating Purchase order for any material to vendor, the particular material quality specification or Ins plan automatically to flow to purchase order.
how to address this issue, wheather it is possible or not
Regards,
s.sakthivelHi,
For your requirement only for viewing the data I suggest you to go for below options
1) In mtrl master itself there is one option Inspection text, here u can maintain the main values so thst during PO
you can refer these values (To find this click on aditional data tab in mtrl master and inspection long text)
2) Prepare one report by fetching all the inspection values from below tables so that u can aslo refer this report
PLKO Inspection plan Header
MAPL Material Assignement
PLPO Operation Details
PLMK Inspection plan characteristics
PLMW MAPL-Dependent Charac. Specifications (Inspection Plan)
Regards
Shiva
Maybe you are looking for
-
I have a hard time understanding why I can't contact support about THEIR problem. I plugged my iPhone into my pc. iTunes came up. It said there was an update available for the phone. I accepted that. Clicked on the "download only" because I didn't ha
-
Hi, I had my new Nano working great and had my music on it no problem. Then I was offered to upgrade to software version 1.0.2 or something to that extent, I also had to upgrade to Itunes 7.4 before it would recognise my nano to begin with. Anyway, t
-
Please reply ASAP-Discoverer and BI Publisher
Hi, Could some one please list the pros and cons from switching from Discoverer to BI Publisher? I know it seems kinda vague but anything you have experienced would be helpful. New to both tools at this moment. Thanks so much!
-
Hey there. When I try to rate iMixes the wrong rating shows up... For example, I give an iMix 5 stars and when it registers in the system it gives it 1 star. I know it's truly taking the lower rating as the total stars from the iMix will suddenly dro
-
I have been using Adobe Premiere for a while and it has been working fine until today, it said it was unable to open my files, after I tried starting my project again it just wouldn't opne at all. What is wrong and how can I fix it? Thanks