At the time of Rebate TDS was not calculate.

Hello Experts,
At time of Rebate (SD) to the customer that time client wants calculate TDS (Sec.194H) i have assign TDS Tax code in Customer master (FD02). After that made the entry of Rebate. when i see the display entry no was TDS calculate.
waiting for reply.
Reliable answer get full points.
Thanks
Jemes

Hello Sir
i have check & tick on When assigning withholding tax code to company code choose subject to withholding tax under customer tab. there are two tab :
This is all ready tick - Subject to withholding tax
I have to tick - Self-withholding agent
And also check Field Status Group : Plz explain in FSG ?
But still at the time of Rebate or Credit memo no TDS is calculate ?
Plz let me know what should i do ? explain in brief
Thanks
Jemes

Similar Messages

My document.numbers can not be opened how can i recover the version from yesterday i was not using time machine and it was not in icloud. is there an app i can buy that might help

my document.numbers can not be opened how can i recover the version from yesterday? i was not using time machine and it was not in icloud. is there an app i can buy that might help

Thanks Andy,
I wish I could have told my sister about this as she could not open my homepage back before my new iWeb site. She now can open my site without the yet in case denial window does appear = I thank you.
I think my iWeb site works as Noone has said otherwise from any platform etc...
Alex L
I do agree that should not have to be a consideration for any users so i agree that it would be great if Apple could allow simplicity to run seemlessly.
I have had this problem since Homepage, and here is
what has worked for me. I send out the link, and
then for PC users I send the link with "<" after the address (without quotation
marks. e.g., <http://site.com>).
I also put a note that if that doesn't work, to just
copy and paste the link into a browser. With that I
have only had 1 person say they still can't open.
Everyone else gets it to work.
It's a lot to do and seems like a hassle, but you get
used to it.
Hope this helps!
Andy Martini
PS - APPLE! When are you going to fix this??! It
seems like such a small thing yet you guys have been
stumped for YEARS on this!

My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on.

My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
Best regards,
Rob.

PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751

When i send an imessage to another person with imessage, my husband also receives the message, even though it was not sent to him. We have always been on the same itunes account and not had this problem, however, when i added the ipad, this started.

When I send an imessage on my ipad to someone, my husband also gets the message, even though he was not selected as a receipient. This just started when I got my ipad and sent a message for the first time. As a side note, my daughter received an itouch and both my husband and i were getting all messages she sent, no matter which one of us they were sent to. I turned her imessage off. We have all of our devices under the same itunes account so that we can share all music and apps. How can we get around this? I do not want him receiving all imessages that I send, this will get very annoying to him.

You can have a separate AppleID only for iMessage and keep using the other one for iTunes.
Just change the AppleID used for iMessage in Settings > Messages > Receive At

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

The time on my iphone is not being updated automatically, although it is set that way, why is the time 10 minutes slow

The time on my iphone is not being updated automatically, althought it is set that way. Why does it not update the time and why is it 10 minutes slow?

Thank you for your reply. I realy have nothing else to sync - no music. Emails do work so its just my contacts I am concerned about. I'm kinda new at this but have a working understanding of the system.
I have an icloud account but the Geek Squad went there and tried but could not export contacts. I truly am not that good re icloud. They worked exclusively with my itunes, re-downloading, etc - all of the stuff in their book.
I have not tried a complete restore because I am not sure I am that good with the equipment but could. I did all of the stuff on the help page - sync reset, forced one-way sync etc but the phone just does not seem to recognize the sync. I have not gone to an Apple store to have them have a look - that may be my next step to hook up to another itunes computer. It seems simple to me - it was working fine until maybe 3 months ago - probably when there was an update. Its telling to me that the phone does not tell me there is a sync in process while itunes is saying there is - its just not biting between the 2.
I appreciate any hep - and I said, I not stupidi about these things but have kind of reached as far as I am comfortable with fear of doing something really wrong.

In the advanced tab of languages and Region the time and date formats will not change

For a certian Application I am using I need to change the format of the Time and Date. I had no problems in Mountain Lion. In the advanced tab of languages and Region the time and date formats will not change. I need the date format to read as 01/01/14 and time format to read 13:00. As I said this was easily done in Mountain Lion and all previous Apple OS. I suspect it's an issue with in the OS.

You're right, it has been that way for a long time. I've never bothered reporting it as a bug since it's simple enough to deal with, but reporting it would be a reasonable thing to do.

The deployment package file (*.zip) was not found

Hi,
I was using my Visual Studio Online account and was pushing it to azure. The deployment failed and this was the result:
Exception Message: The deployment package file (*.zip) was not found. Ensure that PackageAsSingleFile msbuild property is not set to False. (type FileNotFoundException)
Exception Stack Trace: at Microsoft.TeamFoundation.Deployment.Workflow.Activities.FindPackageAndParametersFile.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Does anyone have a possible solution?
I've contacted support and they suggested to turn the website off while deploying but that did not seem to resolve the issue.

photon, you've had quite a few threads now in which you lead those willing to help you down all kinds of useless rabit trails. Most of the problems have been "solved" with you giving a statement much like this last one that "I forgot to <do some basic step clearly outlined in the instructions>".
We all make silly mistakes from time to time - but if you show a consistent pattern of failing to follow simple instructions, then I doubt arch is for you, and I doubt you will continue to get much leeway from this community.

HT1657 I had downloaded a rental but it disappeared from my iPad and isn't on my laptop. The time to watch it has not expired. What am I to do?

I originally put the rental on my ipad. While on vacation I decided to view it on my laptop (with a bigger screen). At the time, I had no internet access. When I attached my ipad to my laptop (wired) I clicked to view on computer and a sign poped up and said I could not connect to the itune store so it could not be transfered. It was then my movie disappeared! I'm back home and have internet connection but there is no record of my rental anywhere I can find. What can I do to retrieve my movie? THe time to view it has not expired yet.

Everything should be on your computer. Sync it back.
You should ahve been syncing contacts and calendars to your computer all along.
Did you fail to make sure that everything was on your computer before updating?

Error message - The HP Deskjet 1510 Series was not found

I bought the Deskjet 1514 on 19/07/15 and installed it on my relatively new laptop. It worked ok, then I did the Windows 10 upgrade on 01/08/15. I installed the updated drivers from HP for this device. What ever I do, (have uninstalled software, reinstalled at least 4 times, used the scan doctor, swapped USB cables and ports, cleaned the disk...) I just get the message The HP Deskjet 1510 series was not found, yet when aligning the ink cartridges the scanner will work but I cannot do the test scan in the scan doctor or scan anything using the HP software (which you have to do as there is no proper control panel on the actual device). As bought the device primarily as a scanner, I am not happy and just want the thing to work but haven't a clue how to proceed except to take the thing back to Tesco and get a refund and buy a Canon instead... Please can anyone help as the HP support is useless? The printer part is working fine, which makes it ridiculous.

Hey , Welcome to the HP Support Forums!
I understand that your HP Deskjet 1514 All-in-One Printer is not being detected via the USB Cable connection on your Windows 10 computer. I would like to assist you today with resolving this installation and product detection issue. Thank you for including all of the troubleshooting steps that you have attempted prior to reaching out for support. At this time I am going to have you complete some additional troubleshooting steps. We will be repeating the uninstall process for troubleshooting today as it is crucial that we have a nice clean slate to work with. Please complete all of the steps below. Please disconnect the USB Cable from your printer and computer before proceeding. Step 1: Remove Driver: 1. Click on your Start button 2. Type Programs and Features in the 'Ask me Anything' box to the right of the Start button. If you just start typing when the Start screen is open it should automatically start typing in the 'Ask me Anything' section. 3. When Programs and Features opens scroll down the list of populated programs and look for your HP Deskjet. If you see your HP Deskjet listed please click on it and choose Uninstall. Follow the onscreen prompts to complete the uninstall. 4. Next, click on the Start button and type Devices in the 'Ask me Anything' box 5. Click Devices and Printers 6. Under the Devices and Printers window look for your HP Deskjet. If the HP Deskjet is listed, please right click on it and select 'Remvoe Device' or 'Delete' 7. Next, under the Printers section in the Devices and Printers window, click on any printer that shows once just to highlight it. Click on Print Server Properties at the top of the window. 8. Under Print Server Properties, click on the Drivers tab. 9. If you see your HP Deskjet listed under Drivers, click on it and choose Remove at the bottom. 10. Click Remove Driver Only 11. Select OK 12. Select Apply and OK under the Print Server Properties window 13. Close Devices and Printers. Please proceed to the next step. Step 2: Clear Temp Files: 1. Click on your Start button 2. Type Run. Click Run to launch the Run dialogue box. 3. In the Run box type %temp% and click OK 4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight. 5. Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item. 6. Close the Temp folder once it is emptied 7. Right click the Recycling Bin on your desktop and select Empty Recycling Bin. Please proceed to the last step. Step 3: Install Device: Please click here to download and run the HP Printer Install WizardOnce the download has completed please follow the steps under the PIW to install your devicePlug in the USB Cable only when prompted by the installerOnce the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal. Please respond to this post with the result of your troubleshooting. Good luck!

The requested URL /tracks.php was not found on this server.

The requested URL /tracks.php was not found on this server.
Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny9 with Suhosin-Patch Server at pt-fb-0.frontier.zynga.com Port 80. I get this message every time I try to play the zynga game pioneer trail on facebook, I was able to play the game on aug 29 2011 for about an hour then after closing firefox and returning a few hours later I got the message again this all started about 3 weeks ago after firefox did an update

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

The requested URL /discoverer/viewer was not found on this server

hi
In e-business suite 12.1.1 , In projects super user responsibility when I want to open JSP forms like :
Team Role Details Workbook and Overcommitted Resource Hours Workbook and Scheduled Resource Hours Workbook This error take place :
Not Found
The requested URL /discoverer/viewer was not found on this server.
i think this is not related to Oracle Projects, i think it should solve by It.
can any body tell me what should i do???

M.Khayatan wrote:
hi
In e-business suite 12.1.1 , In projects super user responsibility when I want to open JSP forms like :
Team Role Details Workbook and Overcommitted Resource Hours Workbook and Scheduled Resource Hours Workbook This error take place :
Not Found
The requested URL /discoverer/viewer was not found on this server.
i think this is not related to Oracle Projects, i think it should solve by It.
can any body tell me what should i do???Do you get this error with this specific page only?
Please see these docs.
11i: "NOT FOUND The requested URL /discoverer/viewer was not found on this server" Error When Attempting To Open Workbook From Apps Menu [ID 1327364.1]
How to Create a Link to a Discoverer Workbook in Apps R12 [ID 471303.1]
Using Discoverer 11.1.1 with Oracle E-Business Suite Release 12 [ID 1074326.1]
Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12 [ID 373634.1]
Thanks,
Hussein

The requested URL /apex/listenerConfigure was not found on this server

please help me..
after run in command prompt (java -jar c:\apex.war) to install apex listener,
i have error when i call link http://localhost:8080/apex/listenerConfigure.
In browser show :
Not found
The requested URL /apex/listenerConfigure was not found on this server
how i can fix this error?
thx :) :) :)

Hi Beny,
let's see what I can do to help you fix your installation.
java -Dapex.port=1521 -jar c:\apex\apex_listener\apex.warThat way you would try to start the APEX Listener on a port that is usually used by the database listener. This could work if you don't have a database installed on that machine or you configured the database listener to use a different port, but I wouldn't recommend to use that port anyway, as anybody will associate it with at database listener... In your case, it sounds like you have a database installed on the same machine you start your APEX Listener on and the database is using that port already. That's why you get "nothing" when you try to access the APEX Listener - the APAEX Listener can't bind to a port that's already used by another process.
java -Dapex.port=8081 -jar c:\apex\apex_listener\apex.war That port sounds better. The fact that you get an internal error indicates that the APEX Listener is actually working on that port, so we could try to debug.
My first guess is, that you've already configured the APEX Listener before. Since you had it running before, I assume you didn't remove the old configuration, so the APEX Listener will reuse it. You'll find the corresponding information in the console output of your APEX Listener.
If that's the case, the error will most likely not be in the previously working APEX Listener configuration, but in your APEX installation. Did you perform the installation steps concerning the APEX_PUBLIC_USER documented for the installation of APEX using APEX Listener? See the corresponding section of the [url http://download.oracle.com/docs/cd/E17556_01/doc/install.40/e15513/otn_install.htm#BABDEEIH]APEX Installation Guide for details.
-Udo

At the time of Rebate TDS was not calculate.

Similar Messages

Maybe you are looking for