At the time of RFQ creation dump error

Dear All,
                    At the time of RFQ creation one Dump error is coiming... please advise to solve this issue...
the error message is :
Runtime errors         SYNTAX_ERROR
       Occurred on     09.09.2009 at   12:10:27
Syntax error in program "SAPLV61A ".
What happened?
The following syntax error occurred in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
Error in ABAP application program.
The current ABAP program "SAPLMEVA" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLV61A ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
The following syntax error was found in the program SAPLV61A :
"Incorrect logical expression: Instead of "X" a field, a function or "("
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "ARCHIVAL"
Network address.......... "172.26.2.145"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 80686"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "ARCHIVAL"
Database type............ "MSSQL"
Database name............ "EDP"
Database owner........... "dbo"
Terminal................. "cheeid92corit"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Mar 9 2009 22:54:07"
Created in............... "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version......... "SQL_Server_9.00 "
Patch level.............. "274"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2,
Windows NT 6.0"
User, transaction...
Client.............. 777
User................ "MMCORE"
Language key........ "E"
Transaction......... "ME47 "
Program............. "SAPLMEVA"
Screen.............. "SAPMM06E 0311"
Screen line......... 54
Information on where terminated
The termination occurred in the ABAP program "SAPLMEVA" in
"ME_LOAD_VARIANTS_PRICING".
The main program was "SAPMM06E ".
The termination occurred in line 55 of the source code of the (Include)
program "LMEVAU08"
of the source code of program "LMEVAU08" (when calling the editor 550).
Source code extract
000250       ENDIF.
000260   *--> Initialisieren
000270   *--> not necessary anymore (Raimond Buchholz)
000280   *   CALL FUNCTION 'CUD0_CONFIGURATION_INITIALIZER'.
000290   *--> Preisteile der Varianten besorgen
000300       CALL FUNCTION 'CEI0_GET_CONDITIONS'
000310            EXPORTING
000320                 INSTANCE    = I_CUOBJ
000330                 APPLICATION = 'MM'
000340            TABLES
000350   *              CONDITIONS = T_VCKEY.                 "del 194053
000360                 CONDITIONS = T_VCKEY                   "ins 194053
000370            exceptions                                   "ins 194053
000380                 error_message = 01                     "ins 194053
000390                 others         = 02.                    "ins 194053
000400   *--> Preisteile der Varianten mit Belegnummer versorgen
000410       LOOP AT T_VCKEY.
000420         T_VCKEY-KAPPL = 'M '.
000430         T_VCKEY-VBELN = I_EBELN.
000440         T_VCKEY-POSNR = I_EBELP.
000450         MODIFY T_VCKEY.
000460       ENDLOOP.
000470     ENDIF.
000480
000490   *--> Preisteile der Varianten an Preisfindung übergeben
000500   *- pricing_load_variant_key muß auch bei Positionen ohne Konfiguration
000510   *- laufen, da die Logik im PRICING zu 4.0 umgestellt wurde
000520     IF I_NO_LOAD IS INITIAL.
000530       DATA: I_POSNR LIKE VBAP-POSNR.
000540       I_POSNR = I_EBELP.
      CALL FUNCTION 'PRICING_LOAD_VARIANT_KEYS'
000560            EXPORTING
000570                 APPLICATION = 'M '
000580                 VBELN       = I_EBELN
000590                 POSNR       = I_POSNR
000600            TABLES
000610                 TVCKEY      = T_VCKEY
000620            EXCEPTIONS
000630                 OTHERS      = 1.
000640     ENDIF.
000650
000660   ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0                             SY-INDEX 0
SY-TABIX 1                             SY-DBCNT 1
SY-FDPOS 1                             SY-LSIND 0
SY-PAGNO 0                             SY-LINNO 1
SY-COLNO 1                             SY-PFKEY GVP
SY-UCOMM
SY-TITLE Maintain Quotation : Item 00001
SY-MSGTY E                             SY-MSGID AIPLOC
SY-MSGNO 002                           SY-MSGV1 303632
SY-MSGV2                               SY-MSGV3
SY-MSGV4
Kind regards
P.Anandhakumar

Hi Anandhakumar,
Debugg the transaction with help of ABAPER.
System will show you the reason for the above error.
Hope this should solve your problem.
Thanks and regards
Gitesh

Similar Messages

Error at the time of PR creation

I am facing a Error at the time of PR creation:-
Status "Material Inactive" of material 30001668 does not allow external procurement
Message no. ME053
how to active the material.

you have a material status in your material master, either at plant level or at general level.
Just remove the status.
Plant level status can be found in almost any plant view,
general level in general data view

IO assigned with Asset,but not coming at the time of PO creation

Hello
IO assigned with Asset,but not coming at the time of PO creation.
I have made following settings:
1     Depreciation - IFRS (INR)              1     0L
15     Income Tax Act                             0
20     Depreciation - Indian GAAP (INR)     3     1L
30     Depreciation - IFRS (USD)              0
31     Depreciation - Indian GAAP (USD)       0
In ACSET-Account assignment:
for dep area-20
CAUFN     Internal Order     *     Generic Trans. Type     02 Depreciation Run
KOSTL     Cost Center     *     Generic Trans. Type     02 Depreciation Run
so currently i am using only dep area-20 only(Indian GAAP)
CAPEX budgeting is through IO. AUC is not doing through IO,its directly from AIAB/AIBU
AS01
KO01
AS02
KO22
KO30
so what is the problem,why i am not getting IO (which is in display mode in PO) when assigned the Asset with category of "A" (asset) in PO.......when i assigned Asset- the GL account come automatically but IO didn't come.
kind regards

Hey Ajay
thanks for your reply.....
now i'm getting new error:
Parallel depreciation area 31 is not posted
     Message no. AA565
Diagnosis
     The asset to be posted does not manage parallel depreciation area 31, or
     transaction type that you are using is limited to certain depreciation
     areas, and does not contain depreciation area 31. This is incorrect.
System Response
     Posting is rejected.
Procedure
     Check the asset and the transaction type.
I have checked some configuration but not able to debug it.
regards

Process Order Batch number generation at the time of order creation

Dear All,
I m facing some issue at the time process order creation:
Current Settings:
1. Batch Number Creation at the time of order create.
Reason for this setting: Release of order is done by releasing operations one by one, therfore batch number will be generated on the final operation release, thats why we set up batch creation at the time of order create.
2. For FG batch number generation there is a program that copy the SFG(in Order BOM) Batch number to FG. ITs a industry requirement.
Problem:
when we create FG order system generate the error message at the time of order creation tht No batch could be determine.
Please suggest the solution
Thanks,

Hi
Hope you have cretaed Batch serch strategy in COB1
U need to maintain it as per your strategy type.

Create warning message at the time of order creation

I am looking for a solution :- "Create warning message at the time of order creation/save if a cc is assigned in the settlement rule that crosses the company code of the order or where the company code of the plant for the order is different from the company code assigned to the cc"

The txn code : IW32 (maintenance order) , this warning message for settlement rule creation using Cost center as a settlement receiver. If the used cost center is belongs to some other company code, said warning message should occure.
I tried user exit, field exit, also used std message control (KO-458). Nothing is working.

How to over write VBBE data when Delivery is created if at the time of SO creation stock blocking is there

Hi,
I want to know how to over write VBBE data after delivery creation if stock blocking is there at the time of SO creation.
That means I want my confirmed delivery quantity to over write the SO quantity in VBBE table after delivery creation. Please help me with your valuable suggestions...
Thanks
Tanmoy

Hi Tanmoy,
This should happen automatically. The VBBE entry should reflect the quantity of the delivery requirement. Is it possible for you to post screenshots illustrating exactly what is happening on your system?

Manual BOM selection at the time of order creation

Dear Experts,
Could you help me to understand if there is any provision to select BOM by user at the time of order creation without the help of production version.Is there any configuration required to make BOM selected manually.
Regards,
Krishna Mohan

Hi karishna,
Please go to T-code OPL8 and in production version use( 1 )Manual selection of production version. Then user can select manually instead of automatic selection.
Regards
Muhammad Umar

How can add partner at the time of PO creation

The requirement is to add an extra partner in the Purchase Order header Partner tab at the time of PO creation itself. The PO is being posted through Idoc. A custom function module has been maintained as inbound processing FM and it calls BAPI_PO_CREATE1 inside.Can anyone help me resolving the requirement?

Using GOS ...

Duplicate material entry at the time of PO creation based order type

How Restrict duplicate material entry at the time of PO creation based on define order type.
Moderator message: please do some research before asking.
Edited by: Thomas Zloch on Mar 11, 2011 1:45 PM

Hi Rahul,
try with This Badi ME_PROCESS_PO , Method Open or Process item,
Implemente it and use a break-point to test it i.e it is triggred or nt , before processing it.
Regards,
Abhisek

WBS budget reduction at the time of PO creation

Hi,
1. When a PO is created against a WBS element, at this point is there any budget check? If so is it against RELEASED budget or TOTAL BUDGET.
2. If at the time of PO creation the budget check is against TOTAL, does the system check at the time of invoice posting against RELEASED?
I have the following scenario in PRODUCTION.
WBS TOTAL budget - 200,000
WBS RELEASED budget - 100,000
System is allowing to post POs and INVOICES fro Rs.180,000 (more than RELEASED). WBS availability check is active.
Any idea why system is allowing to post both PO and INVOICES more than released??
Regards
Prajith

Hi,
The budget is checked against the assigned values.
The assigned value for projects is calculated from:
1. Actual costs on the budget carrying WBS element
2. Statistical actual costs on the budget carrying WBS element
3. Actual costs from lower-level WBS elements, if these do not have any budget
4. Statistical actual costs from lower-level WBS elements, if these do not have any budget
5. Commitments on the budget carrying WBS element
6. Commitments from lower-level WBS elements, if these do not have any budget.
7. Maximum from plan and actual costs + commitments from assigned networks or orders
To know more about the assigned values: Go to CJ30 enter in the budget distribution screen then Extras->Availability control>analysis.
Also check the transaction group in tolerence limit in SPRO
For more details please refer the following note: 178837.
hope its useful.
Reward points if useful.
Thanks..

How to find most cost-effective fwdg agent at the time of shipment creation

Dear Friends,
I have a requirement of realizing the best cost effective transporter(forwarding agent) in the shipment document. Then how to do using the Transportation functionality of the ERP?
There is a scenerio like I want to transport my goods from L to M. In system say i have a route XX for that, which gets automatically determined in the shipment document.
Now on route XX, if i have 5 operative transportors, say A, B, C, D, E.
Transporter A - provides services km-wise, kg-wise, fixed price as well as truck wise
(Say if you opt for km-wise, charges are 15 rs/km, 10 rs/kg, fixed price of 15000 for full truck from A to B)
Transporter B - Similar to Transporter A with different charges
(Say if you opt for km-wise, charges are 18 rs/km, 7 rs/kg, fixed price of 14500 for full truck from A to B)
Similarly other tranporters also have their charges.
and Now at the time of shipment creation, how can i have some standard method, so that the system suggest the most cost effective transportor for my delivery ie. shipment i want to make or probabaly if there is some standard way to get the list of all available transporters on a given route at the time of shipement creation.
Please suggest.
Regards,
Dipti.

Hi Sandeepan,
Thanx for ur reply.
As per my requirement, there might be say 100 routes existing into the system and each route might have say 10 different transportors available. Now they want to know 1) the list of transportors available on the given route - (run time at the time of shipment creation) to be put into the forwarding agent field 2) Of the available (say 10 transportors) who will be the best/cheapest.
As per your suggestion, the functionality helps after we put in the fwdg agent and then estimate his associated cost. But as in this case, since there are so many routes (associated so many transportors) they will not know whom to put in the field.
Hence want to know if there is some standard functionality of SAP which might help us i) identifying the list of transportors on a particular route or a given criteria - run-time ii) How to find the best among available OR i) SAP Directly suggesting the one and best transportor available on a given route.
Please help.
Regards,
Dipti.

Want to change item category at the time of order creation

Hi Gurus,
Client require to implement individual PO scenario.
I was configured the same and working fine.
I am facing problem at the time of item category determination.
User using same material and order type and they are not ready to accept to create new order type.
Now My order type is OR and item category group is NORM and right now system determine item category TAN.
User not want to change manually at the time of order creation.
I have specific condition on which i want to apply this logic.
Now i want to determine TAB item category through some user exits or enhancement.
Can anyone suggest exact in which user exit or enhancement i have to change.
Thanks & Regards,
Chirag

1. Use TCode 0VVW for creating a Z Item Usage, say, ZPO1
2. Do an item Cat determination in VOV4, as
Sales Doc type
Item Cat Group
Usage
Item Category
OR -
NORM -
ZPO1 -
TAB
3. Maintain Customer Materials Info Record by using VD51.
In item screen for Cust-Mat combination maintain Item usage
Regards
JP

Can we set output formats(used in billing) at the time of project creation

hi ,
Can we set output formats(used in billing) at the time of project creation (Project system)
Output formats- like e billing format etc.
Thanks

Hi
No .WE CANT

Default the opportunity currency at the time of opportunity creation

Hello,
How to default the opportunity currency at the time of opportunity creation. At the time lead conversion it is defaulted according to lead currency but when creating a new lead it is not working fine.
Thanks
Subbu

Hi CRMWise,
You can use the JoinField Value function for this.
To default it with the user currency, you can pick the currency from User level.
For new record creation you can put the validation ion the default value and check the post default check box so once you save the record it will be automatically defaulted.
For modified record, you can have a workflow with an update action which can again use the Join Field value function, once you will modify the record this workflow will trigger and update the currency field.
Syntx for JoinFieldValue is
JoinFieldValue('<User>',[<OwnerId>],'<EMailAddr>')
Hope you get the point.
Thanks,
Mayank

Update termination error at the time of order creation and chamge?

Dear gurus,
Facing an error at the time of creation of order.
system is giving update termination error & when we are going in change mode of that order system is giving an error message " SD document XXXX is not in the database or has been achieved"
please treat on priority
regards,
krai

Hi,
Goto ST22 T.Code and analyse the error.The error message why it is terminated will be displayed here.
Or go to SBWP T.Code in the user where you got this error and check the inbox.
It will display why the error is appearing.
Show the same to the ABAPer and ask them to work on it.
I think your server may be slow and it will take some time to update the order created by you.But I am not sure.Check the error message.
Regards,
Krishna.

At the time of RFQ creation dump error

Similar Messages

Maybe you are looking for