At times Mouse Layer shifts down

At times Mouse Layer shifts down, while previewing the file.
Eg: We generally put the mouse layer on top of the caption
while creating, but in few slides after publishing and viewing the
mouse layer is seen below caption box.
When source file is checked this time, the mouse layer is
seen down.
Please let me know the reason and solution for the same.

MacKeeper is highly invasive malware that can de-stablize your operating system. It is also unethically marketed and a rip-off.
Further opinion on it and how to uninstall MacKeeper malware:
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/
This is also worth reading:
http://www.reedcorner.net/news.php/?p=245
It sounds like a faulty power unit. You need to get it professionally checked.

Similar Messages

Any time I try to down download something from torrents an add fro MacKeeper pops up. It then doesn't let me complete the installation. so I have neither MacKeeper nor anything from Torrents. How do I stop the MacKeeper ad from popping up?

Any time I try to down load something from Torrents an ad for MacKeeper pops up. It then doesn't let me down load it to my computer so I have neither MacKeeper nor anything from Torrents. It will not let me access the the client Transmission. How do I stop it from popping up and blocking my access to torrents?
Thank you.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

In fullscreen mode, is there a way to prevent the page from shifting down when displaying the menu and tabs?

In fullscreen mode (F11), when moving the mouse toward the top of the screen to display the tabs & stuff, the page displayed is shifted down. This makes it annoying when returning down with the mouse - you want to reach a certain link, for example, but your target gets shifted up once the tabs & stuff is hidden back.
Is there any way to make the tabs & stuff display 'above' the page content, like on another layer?

Is it the web page display that is changing its own position, or is it something
about the toolbars that is pushing the page down? I have the same issue with
my browser using an add-on to show a multiple line bookmark bar.

How do I detect if the mouse button is down, outside of the applet?

Using
X = MouseInfo.getPointerInfo().getLocation().x;
Y = MouseInfo.getPointerInfo().getLocation().y;I can detect the mouse location anywhere on the entire screen, but after an extensive search on Google I cannot find any way to detect whether a mouse button is being pressed.
The class I am using is threaded, so I want to check each time to see if a mouse button is down (a simple true or false would be perfect).

coopkev2 wrote:
One website says to use the Control.MouseButtons property in Windows, is that possible to do in Java?I would pretty much forget about it, especially if you start to talk about "in OSWhatever it is done like this" - that makes it platform dependent and you can forget about platform specific stuff in the Java language itself - the only way to get something like that done is through a native library that you invoke using Java, using either JNI or JNA.

Div shifting down page in live view

I'm trying to create a website for a project I'm doing.I'm having a problem in live view where I the div with the id "imageholder" keeps shifting down the page. It looks fine in the editor but the browser and live view not so much. I want it to line up with the top div, not the bottom one.
Another problem I'm having is that I can't adjust the footers margin very well. it's not taking into account the div's directly above it. I've included a screenshot of the page as it hasn't been uploaded online yet. Thanks
Here is the code:
HTML:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Home</title>
<link href="CSS/Project.css" rel="stylesheet" type="text/css">
<style type="text/css">
body {
background-color: #E0EEEE;
</style>
</head>
<body>
<div id="container">
<header>
<h1 id="title">Limerick Running Club</h1>
<h2 class="subhead"><strong>L.R.C</strong></h2>
</header>
<br/>
<nav>
<nav id="nav_centre">
<ul>
<li><a href="#">Home</a></li>
<li></li>
<li><a href="#">History</a></li>
<li><a href="#">Events</a></li>
<li><a href="#">Gallery</a></li>
<li><a href="#">Results</a></li>
<li><a href="#">Useful Links</a></li>
<li><a href="#">Contact Us</a></li>
</ul><br/>
</nav>
</nav>
<section>
<h2 >History</h2>
<article></article>
<article class="mainpara">
<p>The limerick running club was founded in 2008. We are a community funded club with the sole aim of helping to make our community fitter and happier. Our main office is based in castletroy and you are welcome to drop in anytime and join up. </p>
<p>Since the LRC was founded we have had a number of members who have shared with us their feeling about joining the club. </p>
<p>You can read more about what their saying below</p>
</article>
<article id="testimonial"><h3>Member Testimonials</h3><h3 class="Name">John Byrne</h3>
<p>Since joining the LRC my health and fitness has improved greatly. I recommended the club to everyone.</p>
<h3 class="Name">Mary Smith</h3>
<p>I'm delighted I joined the LRC. I feel much fitter and healthier since joining and there is a great sense of community surrounding the club.</p>
<h3 class="Name">Tom Ryan</h3>
<p>Really enjoying my runs with the lRC. I'd recommend joining to anyone.</p>
</article>
</section>
<div id="imageholder"><img src="Images/edited.jpg" width="355" height="266" alt=""/></div>
<footer><span id="copyright">©2015 Limerick Running Club</span></footer>
</div>
</body>
</html>
CSS:
@charset "utf-8";
html{
background-color:#E0EEEE;
header{
width:100%;
nav {
width 100%;
height 55px;
#nav_centre {
text-align: center;
width: 1080px;
margin-right: auto;
margin-left: auto;
border-color: #4683ea;
border-style: solid;
border-radius: 12px;
padding-bottom: 15px;
padding-top: 0px;
font-family: Cambria, "Hoefler Text", "Liberation Serif", Times, "Times New Roman", serif;
font-size: small;
background-color:#4683ea;
nav ul{
list-style:none;
nav a{
display:inline;
float:left;
text-decoration:none;
font-weight:bold;
padding-top: 5px;
padding-bottom:5px;
padding-right: 45px;
padding-left: 45px;
height: 20px;
color:#CCC;
header {
text-align: center;
#container {
width: 1080px;
margin-left: auto;
margin-right: auto;
footer {
margin-top: 600px;
text-align: center;
height: 50px;
clear: both;
padding-top: 25px;
#copyright{
color:#a6a6a6;
article {
margin-top: 20px;
width: 650px;
margin-left: 5px;
margin-right: 0px;
#imageholder {
width: 360px;
float: right;
clear: none;
margin-top: 20px;
margin-right: 5px;
padding-right: 5px;
.mainpara {
float: left;
border-color: #4683ea;
border-style: solid;
border-radius: 12px;
padding-left: 5px;
background-color: #F0F0F0;
font-family: Constantia, "Lucida Bright", "DejaVu Serif", Georgia, serif;
width: 600px;
section {
margin-top: 75px;
left: 5px;
h1{
color:#4683ea;
#title{
font-weight: bold;
font-family: Constantia, "Lucida Bright", "DejaVu Serif", Georgia, serif;
color:#FFA500;
.subhead{
font-family: Consolas, "Andale Mono", "Lucida Console", "Lucida Sans Typewriter", Monaco, "Courier New", monospace;
h2{
letter-spacing: 2px;
font-family: Segoe, "Segoe UI", "DejaVu Sans", "Trebuchet MS", Verdana, sans-serif;
#testimonial {
float: left;
border-color: #4683ea;
border-style: solid;
border-radius: 12px;
padding-left: 5px;
background-color: #F0F0F0;
font-family: Constantia, "Lucida Bright", "DejaVu Serif", Georgia, serif;
padding-right: 5px;
width: 600px;
clear: both;
.Name {
color:#FFA500;

Try this -
<article class="mainpara">
<div id="imageholder"><img src="Images/edited.jpg" width="355" height="266" alt=""/></div>
<p>The limerick running club was founded in 2008. We are a community funded club with the sole aim of helping to make our community fitter and happier. Our main office is based in castletroy and you are welcome to drop in anytime and join up. </p>
<p>Since the LRC was founded we have had a number of members who have shared with us their feeling about joining the club. </p>
<p>You can read more about what their saying below</p>
</article>
Move the imageholder div so that it is the first child of the "mainpara" article.
Also, you probably want "...what they're saying below" in that last paragraph above. Finally, why do you have a nested <nav> tag in your code?

IMac too heavy? Shifting down constantly.

I just recently purchased a new 20" iMac and I've noticed that my screen will slowly tilt down from gravity. Without any thumps on the desk or vibration from walking around, just leaving the room and coming back 10 minutes later it will have shifted down. The only remedy to this I've found is tilting the display all the way up, that way it has a harder time slipping down. This computer is only 2 days out of the box. Any ideas what I could do to help this situation?
-Keri

I have the 24" (even heavier) and it stays as I place it. This is a problem with your stand where the arm connects to the display. It should be replaced or repaired.
-mj
[email protected]

How do you get the rest of the form to shift down when a field grows in a subform

I am using ES2, I am trying to get a form to shift down when a field grows in a subform, and nothing I tries works. I am not an expert in this area, but all the help I have tried on-line does not seem to workI would be more than happy to email the form to anyone that could give me some assistance. I have already spent too much time on this project, and if I cant get it to work, I will have to move back to a simple word form without all the fancey bells and whistles, but I hate to move backwards. Any help or guidance would be greatly appreciated.
Thanks in advance,
Kathy

Thank you so much, I tried to duplicate the form from Assure and something is still wrong. The background of the subform is not light green, I am not sure if the color was for display purpose only, but it still did not flow right either. I was unable to find the option in the testfield to "Display all of the content (on exit). I am also getting an warning note: The object may not work properly. Although the object is allowed to break, deselecting the "allow page breaks within content" option of the parent object restricts this object from breaking between pages.    Here is the settings as they are currently set:
Subform:
OBJECT TAB
     Binding:
          Object: subform1
          DataBinding: Usename (subform1)
     Pagination:     Greyed out
     Subform:
          Content: Flowed
          Flow Direction:     Top to Bottom
          Allow Page Breaks withing Content     Checked
          This subform is an insertion point        Unchecked
BORDER TAB - NA
LAYOUT TAB
     x = .25IN                         Y=.25IN
     width = 8in                       height = greyed out
     autofit no checked             autofit = greyed out but checked
ACCESIBILITY TAB
     Role: None
     Rest is greyed out
TEXT FIELD SETTINGS:
OBJECT TAB
     Field:
          Field type: Text Field
          Caption: TextField
          Appearance: Sunken Box
          Allow Multiple Line     Checked
          Limit Length - Not Checked
          Limit Lenfth to visible Area - Not Checked
          Allow Page Breaks within content - Checked
          Keep with Next - Not Checked
   Value
          Type: User Entered Optional
          The rest is blank
     Binding
          Name: TextField1
          Data Binding: Use name (testField1)
BORDER TAB - NA
LAYOUT TAB
     X = Greyed out                    Y = Greyed out
     Width: 2.4409in                    Height: .3543in
     Expand to fit - not checked     Expand to fit = Checked
What am I missing?

Kill the MouseEven.CLICK event when mouse is held down?

I have been studying games on Facebook and am trying to emulate mouse event handling. For example in ChefVille you can click on objects and drag them around. But if you hold the mouse down you pan the entire game environment and when you release the mouse button a click is NOT registered on the object below the mouse. In my tinkering the CLICK event is triggered on the release of the mouse button no matter how long I keep the button depressed. How do I keep the CLICK event from firing if the mouse is held down for some period of time?

I don't know that you can cancel a CLICK event in the middle of it happening (CLICK = MOUSE_DOWN followed by MOUSE_UP), but you can trigger a Timer on the MOUSE_DOWN event and use its event handler to set a boolean variable that your CLICK event handler function can make use of to decide whether or not to process a CLICK event.

After Effects jumps some frames when i use "time reversal layer"

hi!
i'm editing a stop-motion video. i have a big problem that with AEcs5 i never had.
when i use "time reversal layer" with some image sequence layer (but also with a .mov with alpha) AE become crazy:
sometimes he erase (or jump) some frames, sometimes he put frames from other image sequence that i didn' put in the timeline!!
if u see the image there is nothing here, and appears an image that i didn't put there!!
can you help me please?
thanks!

Hi Rick, super thanks,
but i checked and all my comp are 24fps.
for your suggestion of use the time remap to invert one sequence, many thanks, i'll try!
i use the time reverse, because is good with stop motion when i whant to play with go>back>go>back
i show u the problem:
the column have to go up and down:
but when i render the video there are some frames that jump:

HT1222 I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit

I have iphone 4 and the software is ios 7.0.2. I am facing problems with my phone. Since the last software update my phone has started giving problems. like it hangs sometime when i recieve an incoming call. The carrier status bar shifts down a bit and sometimes it vanishes automatically. I,m confused.
Secondly i have an update IOS 7.0.4 waiting in my Software Update menu. I have tried so many times to update my iphone but it always fails to update the IOS 7.0.4. Any body suggest anything regarding this

Wow. Lots of help. Thanks apple

Iphone 6 - Screen shifts down?

I can be at the home screen (with my icons) or looking at my pictures or on a Safari web page- and suddenly it will shift down to a half screen (with one half being black space). Any reason for this?
Example: viewing apple.com on Safari:
Thanks
Katherine

the shifting down I am experiencing is not like the Reachability tool. For the home screen the icons shift down half-way with just the background displaying. If I am in Safari, pictures, settings anything else - the top half is just empty black space. It can go up and down several times before either stopping or me touching it upwards.

My ipad 3 screen seems to be shifting down!!!!! What can I do?

I purchased an ipad (third gen) last year and noticed that my screen has shifted down a little. This happened about a week ago. I should (can) I do?

Step by Step to fix your Mac
Why is my computer slow?
Most commonly used backup methods
If you get pinwheels when off the Internet, it coudl be a failing boot drive or just a few bad sectors as it has a hard time reading from it.
This is a possible cure, it's a lot of work though.
Reducing bad sectors effect on hard drives
How to erase and install Snow Leopard 10.6

PSE13 repeatedly crashing when opening more than one file at a time to layer images. [was: Feeling very frustrated.]

Just bought Photoshop Elements 13. I have a Macbook Pro that meets all the requirements. I have installed and reinstalled the program but it just keeps crashing. The program will load, when I choose the expert tab and try to open more than one file at a time to layer images it just crashes and says "Photoshop Elements has closed unexpectedly" Can anyone help me please?

mikeobe wrote:
OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
You may not even have the problem!
Have you installed the new printer yet?
There are many more people who don't see it happen than those who do.
PS: there is always a default printer.

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

I use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, a

i use to be able to scale down objects highlted in box by clicking any corner holding down mouse and scaling down, that option is gone, is it an error on my settings or has that option been removed I now have to go to menu option click edit, then scale, and then manually have to scale down a percentage.

Copy cat.

At times Mouse Layer shifts down

Similar Messages

Maybe you are looking for