At use ipsec useful speed in the channel decreases?

At use ipsec useful speed in the channel decreases? ?
Example:
remoteuser-----internet---server_with_FTP
remoteuser download (over internet) from the FTP with the sped: 15k/sec
If use this:
remoteuser(BM39vpnClient)--------INTERNET---BM39SP1--server_with_ftp
How will be decreases channel speed ?
What will be: 15 K/sec, 10 K/sec, 5 K/s ... ??
Any info, please.
Serg

serg,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

When connecting wired my router straight from my internet provider I get speeds in the 90mps range. Now when connecting wired through my airport extreme I get speeds near 10mps. Also when using wireless for my ipad3 I recieve download speeds of .63mps.

When connecting, wired, to my router from my ISP I get speeds in the 90mbps range. Then when connecting, wired, to my Airport Extreme I get speeds of 10mbps. Wirelessly I get download speeds of 6mbps on my laptops and only 1mbs with my Ipad3. I am making sure only one device is sharing the network to make sure to get accurate results. Why are things so slow?

Hi Ty,
First, check with you ISP to see what speed they've promised. In my case, they indicated that the speed should be greater than 50 Mbps. If they say that it should be significantly higher than what your getting, then try the following if you're using Airport Utility v.6.:
1. Open the Airport Utility (Desktop: Command+Shift+U to open Utility Folder, select Airport Utility)
2. Click on the visual representation of the Airport Extreme and then select "Edit" (bottom right corner)
3. When the window opens (to a tab "Base Station"), click on the "Wireless" tab,
-it should have the following options: Network Mode, Wireless Network Name, Wireless Security, Wireless Password, Verify Password, a checkbox with "Enable Guest Network", and a button "Wireless Options..."]
4. Select "Wireless Options", which should open another window with the following options:
5Ghz network name, Country, a checkbox with "Create hidden Network", Radio Mode, 2.4 GHz Channel, and 5 GHz Channel [both of which can stay on "Automatic"]
5. Clicking on "Radio Mode" will bring up a list in which the las option should read:
802.11n only (5Ghz) - 802.11n only (2.4 GHz)
Once you click "Save", your router will blink amber for a little while and then it should work.
Hope this helps. Let me know if it does/doesn't.
DFLovesBikes
p.s. I apologize if the directions were excessively explicit, but I was thinking about my 73 year-old mother trying to follow them, so I erred on the side of making them more understandable. Good luck.

How do I read multiple channels at one time using labview with the Fluke Hydra Data Bucket 2620a using serial port?

I need to take a reading of 15 channels about once a second. I can read one value at a time using the monitor function on the read values.vi driver, but this takes forever to read all the channels.

I don't have this instrument but I took a look at the instrument driver and it appears that you can only configure one channel at a time to read from. You might want to take a look at the command set for this instrument and see if it allows for configuration of multiple channels. It could be that the instrument driver just doesn't have that built in.
J.R. Allen

How do I speed up the conversion of a PDF to Word using Adobe ExportPDF?

How do I speed up the conversion of a PDF to Word using Adobe ExportPDF?

Believe me, we ALL know what you are going through!
You CAN develop your slideshow directly in iDVD and you can have multiple songs (I just figured this out myself just now! LOL). I will walk you through the process.
Firstly, open a new project in iDVD.
Then press the + button (bottom left hand side) and add slideshow and a heading "My Slideshow" will show up on your iDVD screen. Then, go into your media and press photos, and drop your folder of photos into the "My Slideshow" button (if you havent put your folders into a new album in iPhoto, now is the time to do this).
Now double click on your My Slideshow button and all your photo's should come up. Down the bottom of this page you will see some options. Slide Duration, Transition etc. Again, go into your media and select audio. Go through your playlist and hold down the apple button (next to space bar left hand side) and select the songs you want to play with your slides then drag them across to the audio button (it automatically changes the slideshow to fit to audio). The only problem I can see with this is that there is considerable "dead" time between tracks which means some slides show without music. You can easily solve this by going into Garage Band and trim off the excess "dead" time at the end of each track. If you have problems with this I can talk you through that too if you would like.
Oh and I think i read somewhere that 99 photos is the maximum you can have in iPhoto?? That could be what is causing your problem. You could always break it down in to 2 separate slide shows?

Reg:Whether to use BPM or not when the channels are controlled externally

Dear All,
My scenario is File to File and for this the channels are controlled externally.
This is achieved through the Abap proxies to Http receiver scenario, where udf is being implemented for this.
UDF:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey trig = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamOne");
DynamicConfigurationKey trig1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamTwo");
DynamicConfigurationKey trig2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamThree");
DynamicConfigurationKey trig3 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", "UrlParamFour");
conf.put(trig,action);
conf.put(trig1,party);
conf.put(trig2,service);
conf.put(trig3,channel);
return "";
If the value of the Action is START then the existing communication channel should be stopped and restarted again .
If the value of the Action is STOP then the stop action should be performed.
For this I have implemented two mappings and condition is being given in Interface determination
so as to have the splitting of messages when the start action is performed.
Can anyone suggest me how to implement this by using a single mapping or this could be achieved only through BPM?
Thanks in Advance,
Lavanya .B
Edited by: Lavanya Balanandham on Aug 4, 2010 2:24 PM

Hi ,
My requirement is ,I need to merge two mappings into one mapping without using BPM.
My File to File scenario communication channel is controlled externally by using Proxy-to-Http scenario.
For this I have used two mappings say when the value for the action is START then the File receiver communication channel should be stopped(which is already polling) and again the Action START should passed to the Receiver File Channel to start again using the proxy-http scenario.
Now I need to merge the two mappings into a single mapping so as to perform the above stated flow without using BPM.
lavanya

Does the channel used by Airport Supreme cause problems?

I have problems with my wireless system using the Airport Supreme on my Mac Pro. Streaming movies and internet use on my iPad cut off and often I find that my internet service is down. I need to contact the cable company which resets the modem. The Tech at the cable company tells me the problem is that my Airport Supreme is on a channel where there is interference and the channel needs to be changed. Does this make sense. If so, how does one change the channel, and how do you know what different channel to use?

I answered on your main thread.. where I already answered.
Changing channels is not relevant.. as soon as you reboot the main router or the AE it will auto select channels that are not going to interfere.. you are being kept in the dark and fed bulldust.. (this is called the mushroom syndrome) but please answer the questions in the thread.
Does this make sense.
No
If so, how does one change the channel
Just so you know.. go to wireless options.. and change the channel from auto.. to a number.
how do you know what different channel to use?
Trial and error.. test 2.4ghz on 11, 9, 6, 1
The reason even a wireless survey is useless is because every time a router tests wireless it can change channels.. every time it restarts it picks the channel least used. There is no such thing as a best channel.. for all time.. because all the routers in your area are playing musical channels. Everytime you check it can be different.

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Why can I not use the channel name, which is obtained from the function of DAQmx Task, as the input of the channel name for the function of Get Channel Information of DAQ?

Not a lot of details here, but my guess is this isn't working for you because you are wiring in the task to the Active Channels Property and not the actual Channel Name. I have attatched a screenshot of what I believe you are trying to do. The Task has 2 channels in it, so I need to index off one of the channels and wire it into the active channels input of the Channel Property node. Then I can read information about that channel
Attachments:
channel_name.JPG ‏69 KB

[svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .

Revision: 4290
Author: [email protected]
Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
Log Message:
Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-288
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

I set up time capsule using a wireless 4g modem. it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB). Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

I set up a new time capsule on a wireless 4g modem. I started the initial backup. It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)." Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
Thanks,
David

Bunce wrote:
oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
suggestions before I either get this looked at or scrap the HD on it and move forward.?
Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

When I opened up a new tab, I used to get the Speed Dial page. I like that. However, since I updated my AVG anti-virus program, now when I open a new tab, I get the AVG search page. Can I change it back so that I get the Speed Dial?

In the past, when I opened up a new tab, I used to get the Speed Dial page. I like that. However, since I updated my AVG anti-virus program, now when I open a new tab, I get the AVG search page. Can I change it back so that I get the Speed Dial?

I had that too. On the bottom right of the AVG search page is a link which leads you to where you can switch it off. This restores normal Speed Dial operation.
This hijacking has really cheesed me off. I've just downloaded Avast and am going to put it on in place of AVG.

Hey, I Upgraded from 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

Hey, I Upgraded from LOGIC 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

Hey, I Upgraded from LOGIC 7, to 8. I'm using a Powerbook G4, with Mac OS 10.5.8, MY question is: im unalble to click on the channel strip to add plugins. actually, I cant click on a lot of options, mainly things with scroll down menus ie... busses, aux.. HELP!

How to speed-up the Ram Preview/Rendering using Adobe After Effects Cs 5.5?

Hi guys,
As the the title says, how can I increase the speed or make the ram preview render a lot faster or make the speed to the fullest?
I've done my researched already but I'm not sure if I did the right thing.
I will list down the things that I've done so far trying to make it faster.
1. Using the SECRET option (Pressing SHIFT) from the Preferences and ticked those two boxes - Disable layer Cache and Ignore sequence rendering errors.
2. Settings for the Memory and Multiprocessing. (Im not sure about this part, I mean I dont know if I did the right thing)
3. No other application's running
My Machine's specs are.
I'm using MSI GT70
-i7 CPU @ 2.30ghz
-16gb of RAM
-Nvidia GT675m
-64bit
I'd really appreaciated any help and a best settings for Mutltiprocessing.
Many thanks,

Most of the time I have MP turned off. Most of the plug-ins that I use are not MP aware and I seldom use AE's render Cue for rendering for delivery. I use AME and keep working on projects while I'm rendering.
Basic rules, at least 2GB per processor, at least 1 processor for other apps, Make sure the CPU's actually used matches the CPU's assigned, then test with your most common project. If you are doing something tha bogs down the system just turn it off.

How do I change the speed of the cursor when using the arrow keys?

How do I change the speed of the cursor when using the arrow keys?

Applications folder or Apple icon > System preferences > Keyboard increase key repeat.

Useful list of the Freeview channels as of 1st OCt

A useful list of the Freeview channels as of 1st OCt is at
http://www.freeview.co.uk/wp-content/uploads/2014/10/Freeview-Channel-Guide_1-Oct.pdf
Of course it gets quickly outdated ... eg when ITV Be starts on channel 26 on 8th OCt.
However it does list the various regional and local variants fairly clearly.

Sadly as I am on a Relay transmitter that is more like a wishlist! I get 24 channels and that includes SD/HD duplicates. Luckily I still have my old Sky box for the likes of ITV3&4, 5USA etc. could have sworn when the digital switchover took place I read somewhere that Relays would be upgraded too but no sign of that ever happening.

Why have the channel shortcuts changed in CS4? Cyan used to be "cntrl+1" and now it's "cntrl+3" for

Why have the channel shortcuts changed in CS4? Cyan used to be "cntrl+1" and now it's "cntrl+3" for example. Why?

http://blogs.adobe.com/jnack/2008/10/shortcut_changes_in_pscs4.html
Note there's a link to a plug-in in the article that remaps the keys to the old behavior.

At use ipsec useful speed in the channel decreases?

Similar Messages

Maybe you are looking for