At what percent do I start charging my iPad?

Do I start at 10-20% charge remaining and don't let it run under 10% This is all I need an answer to don't show me how to charge it what tempter I should charge it and all of that. Some people just can't answer the question.

When all you see is the red battery icon, and you can't turn it on:
Don't leave it like that for a long time.

Similar Messages

What do I need to charge my iPad when in the UK?

What do I need to charge my iPad when in the UK? I know I need the UK plug adapter, but does the 12W iPad charge adapter convert the power?

If you are using the Apple supplied charger, you will simply need a plug adapter for the local power system.
As per your other post, if you wish to simplify your packing, the iPad charger could be used for the iPhone and the iPad.

What do I need to charge my ipad in europe

I am travelling to Germany this summer and will be bringing an ipad and an iphone. What do I need to charge these electronics- just an adapter??

You just need an adapter to convert the AC plug on the power "block" to the German standard. The power "block" itself is universal.
Regards.

AT WHAT % OF USEAGE DO YOU CHARGE YOUR IPAD BATTERY? 30 % 20% 8%- WHEN, ALOS HO WLONG DO YOU CHARGE FORM THEA/C POWER OUTLET?

What % of use do yo recommend to re charge your battery using a/c outlet?

You can recharge at any %.
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

What do i need to charge my ipad 1 in the ukraine

i am sending an ipad 1 to someone in the ukraine. will the standard US cord and power adapter work?

I do not think so. They'll need a plug adapter to make the US plug fit into Ukrainian outlets.

HT4060 Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It just seems to be exceedingly f

Is it normal for someone to have general diffuculty charging an ipad? I see the "not charging" message even when I am using the charger and cord that came in the original box, plugged into a wall socket directly. It is normal for me to plug it in overnight and to see no charge whatsoever the next day. I have never had so much trouble using a friggin charger in my life. It just seems to be exceedingly finicky. What am I missing?

Charging your iPad should not be problematic. It should be an easy thing to do using the charger provided with your iPad connected to a known good wall outlet.
The charging problem you are experiencing is most like caused by:
1. A faulty charger
2. A faulty cable
3. A bad wall outlet
4. A problem in the iPad.
The first three of these are easiest to eliminate. Try a for ends charger and cable. Make absolutely sure your outlet is good. Try other outlets.
If the charger, cable and outlet a proven to be good then the problem lies in the iPad.
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?

I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no avail

Before doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

Macbook pro quit charging then randomly started charging a day or so later.

Are there any reasons this would happen? If so can I fix without just waiting for the random to happen? It has happened two different times, I even went and bought a new Magsafe charger this time as soon as I plugged it in it started charging! Well, I don't know why but I tried the old one and it is now charging just fine. The two instances happened approximately a year apart.

That is interesting...if you go to the apple, left side of the menu bar, About This Mac, More Info, System Report, Hardware, Power what does it show for battery Condition, Cycle Count, Capacity, charge remaining, and voltage?
Battery condition anything but Normal means could be problems from there.

I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

I have plugged my iphone 5s into windows computer, the computer picks up that its there and starts charging but keeps coming up with error message when i try connect to itunes... HELP!!!

What does the error message say? (Precise text, please.)

What's with the ILD charge?

I have found countless links about this ILD company slipping charges on to Verizon phone bills without people actually asking for this service (whatever it is). Their website makes it look like a merchant type service while the charge on my bill eludes to a "Fone Right Voicemail Mthly Fee". This is a joke! Why would Verizon allow such a thing to take place is beyond me. Apparently, ILD does have legitimate contracts with the telephone companies to allow their services but sticking them on there through tricky backdoor means should never been allowed by Verizon. Of course, maybe they don't care about losing a customer who has to deal with this but I can't imagine them losing customers who pay well over a $1,000 a year in services simply to allow this company to start charging ($14.95) at will for unnecessary, unasked for services.
Please tell me there is hope to have this removed without having to drop my services altogether and switch to a cable provider.
Has anyone out there had this similar issue and any help from Verizon or is it time to switch away from a company that allows this to happen?
UpsetConsumer

PC7812,
I couldn't agree with you more about your sentiments/statements. It's crazy to see this stuff take place when it should be obvious that protective mechanisms should be in place for the consumer. I guess we're witnesses to the shaddy background deals that take place so that the big guy can make an extra buck.
Well, I have some good news to my initial post.
I contacted ILD services (who deny any immediate responsibility for the service being assigned to me) they kindly forwarded my email to Fone Right.
I contacted Fone Right and they have kindly agreed to refund two months of this service but it will take several billing months to do so. I will follow up if this actually occurs. Their reasons for why this charge occurred were erroneous and they could not substantiate who or why the service was assigned to a phone that already had this service. The person they referred to doesn't live in my home and I have never heard of them.
Moreover, I have addressed the real issue for my inconvience. I terminated my service with Verizon and have switched to Comcast triple for ALL of my services. I now have an internet connection speed that approaches 20Mps and have High Def TV to boot and all for less than what I would have paid with Verizon. Comcast has never allowed such "Add on charges" for other services not related to comcast.
Cheerfully, UpsetConsumer (not so upset anymore)
Message Edited by UpsetConsumer on 02-15-2009 03:02 PM

HT1657 what happens if i start the rental and i wont download

What happens if i started the movie rental when it wasnt all the download and it wont download the rest of it

fergisom505 wrote:
what happens if i unplug the charger and i plug it back in is it a problem
Why would it be? The answer is no.

Battery will not start charging

I don't know why I think it software related but my battery will not go into the charging mode. I have been watching it for a few days now and it is now down to 1% charge left and has yet to start charging it's self back up. Anyone have any ideas?

Dpbours,
Try shutting down, removing the battery and AC and press and hold the power button several times, then re-insert the battery and AC and see if it will charge correctly.
You could also try the battery gauge reset function.
Do you have another battery you could try in the system to see if it will charge - it could be the charging circuit is bad, but this seems a rather unlikely condition.
What does the battery information tab on power manager report about the battery in terms of full charge capacity vs design capacity? How many cycles are on it?
Mcmarchitto,
Perhaps you could tell us exactly which system you have, what battery and a few details about your configuration? We are probably limited to general advice otherwise.
If you have a new system T410/510 system, you might check out this tip - we have a new BIOS and battery firmware for download that could resolve this kind of charging issue.
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

What html code will start an EXE (program) with a click on a webpage link?

The code in bold below worked. After I switched my browser from IE 11 to Firefox to get the hover on hotspots to work, the program gave me this error message. I moved the EXE file to my local file folder and tried it as shown below. Still no success. Any suggestions?
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Family Tree Charts</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /><style type="text/css">

</style></head>
<body link=blue vlink=blue>
<table width="100%" height="25" border="0" cellpadding="4" cellspacing="0">
<tr>
 <td width="93%" height="27" bgcolor="#EFEFEF"> <div align="center">
 This Software Allows You To Review Neat Charts of Your Family Tree </div></td>
 <td width="7%" bgcolor="#CCFFFF"> <div align="center"><A href="Mementos_Menu.html">Back</a></div></td>
</tr>
</table> <center>
 
Click the link below to download a special software program for your PC. 
 
<a href="http://jdmcox.com/">Cox Website</a> 
ITEM 1 (AT THIS WEBSITE) IS THE FAMILY TREE CHART PROGRAM. 
It is called Simple Family Tree 
<table width="80%" border="2" cellspacing="2" cellpadding="2">
<tr>
 <td width="49%" align="left" valign="top">Click the link below to use this special software program after you download and install the program. 
 

<a href="C:\Users\Tom and Polly\Documents\Genealogy CD\Simple Family Tree\Simple Family Tree.exe">Family Tree Charts Program</a> 
Click the "run" button for both warning messages. 
Click the "READ THIS!" menu option when the program opens. 
Click "X" in the upper right to close the program. 
You can update the family data in future years with this program too.
 </td>
 <td width="51%" align="left" valign="top">NOTE 1: Be sure your HTML code for this webpage has a proper line to link to the location where the software was installed. You can use NOTEPAD to make HTML code changes. My existing line is: 
 "c:\program files (x86)\simple family tree\simple family tree.exe" 
 The underlined portion will need to agree with where the program was installed. Just change the directory (see underlined sample above). Good luck. If I am still living, call me. 
 NOTE 2: After you download, install, and try to use the program, you may get an error message window that looks like this -"0 FAMS @F191 @ FAM". This means you have an individual record in your GEDCOM file that does not have a parent. Be sure all GEDCOM records have at least one parent even if you must name the parent UNKNOWN.</td>
</tr>
</table>
 </center>
<table width="100%" border="0" cellpadding="2" cellspacing="0" bgcolor="#CCCCCC">
 <tr>
 <td bgcolor="#EFEFEF"> ©2002 Sales and People</td>
 </tr>
</table></body>
</html>

Herbert:
Here is my latest code attempt, but I get messages about the lines in BOLD that I do not understand.
Perhaps you will see what I need to fix. Sure appreciate what you have found and shared with such a neophyte (aka dumbo).
Tom

function RunExe(path) {
try {
var ua = navigator.userAgent.toLowerCase();
if (ua.indexOf("msie") != -1) {
MyObject = new ActiveXObject("WScript.Shell")
MyObject.Run(path);
} else {
netscape.security.PrivilegeManager.enablePrivilege("UniversalXPConnect");
var exe = window.Components.classes['@mozilla.org/file/local;1'].createInstance(Components.interfaces.nsILocalFile);
exe.initWithPath(path);
var run = window.Components.classes['@mozilla.org/process/util;1'].createInstance(Components.inteinterfaces.nsIProcess);
run.init(exe);
var parameters = ["/c start Simple Family Tree.exe"];
run.run(false, parameters, parameters.length);
} catch (ex) {
alert(ex.toString());
This Software Allows You To Review Neat Charts of Your Family Tree
Back
Click the link below to download a special software program for your PC and your GED file.
*Cox Website*
ITEM 1 (AT HIS WEBSITE) IS HIS FAMILY TREE CHART PROGRAM.
It is called Simple Family Tree
Click the link below to look at my GEDCOM file contents. Instructions are provided in the READ THIS menu option at the top of the window.
*Show Yarnall Chart*
*Return to this webpage by clicking on the backarrow after looking at the chart.
You can update the family data in future years with this program too.*
©2002 Sales and People
Date: Thu, 2 Jan 2014 02:09:18 -0800
From: [email protected]
To: [email protected]
Subject: What html code will start an EXE (program) with a click on a webpage link?
 Re: What html code will start an EXE (program) with a click on a webpage link?
 created by Herbert2001 in Dreamweaver support forum - View the full discussion
Perhaps this might be helpful:
https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/
It allows executables in Firefox to be run - it is an extenstion, though, so it must be installed in Firefox before your page will work.
Another option is this solution, but it will still require a manual change in Firefox:
http://forums.mozillazine.org/viewtopic.php?f=19&t=803615
Or this: http://stackoverflow.com/questions/6472435/running-exe-in-firefox-why- do-i-get-an-error
However, you will still have problems with getting it to work cross-browser. Honestly, browsers are not supposed to have access like that to the client side file system, which absolutely makes sense for the web.
That is why you may have to approach the solution from a different angle - perhaps create a server side cloud version of your application(s) which can be easily accessed and run by your family members. I believe you used C to develop the applications? Although I have no experience with this framework, Wt might be a solution to convert your projects to server side applications:
http://www.webtoolkit.eu/wt
Good luck!
 Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5972893#5972893
 Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5972893#5972893
 To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5972893#5972893. In the Actions box on the right, click the Stop Email Notifications link.
 Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

What does this message mean Charging is not supported with this device?

What does this message mean Charging is not supported with this device?

You've gotten 2 good answers already, but there's a key assumption in both that you got the message when connecting the iPhone to some other device. If this is the case you can get an adapter in the Apple online store that will allow charging from older devices.
If, however, this message appears when you are not connected to anything the problem is dirt or moisture in the dock connector at the bottom of the phone. Clean it with a dry toothbrush or air blast.

HT204380 How can I make a face time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?

How can I make a Face Time call from one country to another( supporsing both parties using iphone 4s). What will be the caller charges. If there is no charges as we use wifi, will there be a charge till connecting the call?

FaceTime is free to use. You will not be charged for using FaceTime.

At what percent do I start charging my iPad?

Similar Messages

Maybe you are looking for