At what point is a new Air2 considered defective?

My new Air2 is less than a month old and has gone to a black screen 3-4 times requiring me to hold the home button and top button to reboot it, and it has also rebooted itself on its own several times while using it. Are these common problems with this version of the iPad or are these iOS issues?
Thanks.

Procyon256 wrote:
YYou missed the 14 day limit apple has for a refund. Am I correct to presume that you spent that time in good faith trying to get it to work properly? So often I see where folks do and just end up out of luck. Check your store and see what it's return policy is. You may still be able to exchange it but either way the longer you wait the more out of luck you may be. Like Meg pointed out, it's what Apple thinks that matters, not you.
If Apple deems it defective, they will replace it within a year, not 14 days. The 14 days is only for a return/exchange.

Similar Messages

  • At what point is "other" in storage considered excessive?

    Right now my other category is taking up 2.67gb of my 13.37gb of available storage. I still have plenty of room left at 4.92 gb free, but was just wondering if this calls for a restore as I am not sure how much of the data in this category would become free after? - Thanks

    Thank you both paulcb and Ralph Landry1 for your swift response and valuable input.
    -cheers

  • IPad Gen 3 had classic iOS8 glitch, 24hrs later of little to no usage its Died Apple Tech said a fault code came up but wouldn't elaborate - just the up sell to either a new Air2 or a refurbished Gen 3 @ $360AUD !! Anyone else??

    ipad Gen 3 dead... Apple tech says major fault.. seems  to have occurred after iOS 8 update and even though its 2 years old its been only lightly used.. Seems very sus with the new Air2 out and a perfectly good iPad just all of a sudden dead- Help !!

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • What are the major issues to consider in code review? Or performance analys

    What are the major issues to consider in code review? Or performance analysis?

    I would not recommend you to try to optimize performance by checking the coding.
    There is the code inspector which can do all which makes sense automatically.
    The above mentioned points are not the real issues.
    Instead of code review you should execute test cases and measure the exection time.
    1. With STAD if you want to get good time measurement
    2. With SE30 and ST05, if you want to have data for further anaylsis.
    Check total time (SE30), check whether DB part is large, then go to SQL trace. Do the check mentioned here
    /people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
    to find the SQL bottlenecks.
    The major point about SQL problems is index support, if there is no proper index support then the performance will be poor. Be aware, that problems are only visible, if you tables are filled.
    In a test system where you have very little data, you will never encounter performance problems.
    Check also the Top10 of the SQ30 hit list.
    Be aware that a proper performance analysis is not a 5 minutes job.
    Siegfried

  • What exactly does a new poster have to do to get permission to post images?

    Recently there was a forum update that disabled new posters to add images
    (AND links?) Supposedly this was to reduce spam. So far so good.
    Not surprisingly, immediately after the update we have numerous posts in the Forums Issues forum complaining about this feature and no doubt plenty of users just submitting to this policy in silence.
    This whole feature is a SEVERE (that's right. bold AND in caps) hindrance. I don't have the stats, but I'm sure a considerable percentage of
    (non spam) original posts are from new users with no previous forum activity. Pictures are especially important in the Chart Control forum as visualization is what charting is all about.
    (This is the forum I frequent. So yes, I'm biased.)
    Ofcourse, I'm sure the forum developers have weighed the pros and cons and studied the stats and then decided what to do after serious consideration...
    The question is: What exactly does a new poster have to do to get permission to post images? Wait for how long? Reply to a confirmation email? "Participate" more?
    (Say it ain't so.) How much more?
    If there really is a workaround by adding an image tag with the edit html button, I don't want to hear it. It's as silly a way to add images as in the before times, the long long ago.
    (Also, if this is possible, this whole restriction feature is actually worse than useless. Spammers will exploit this sooner than later. (A very good point made by our dear friend Quincy in a post that has since been deleted it
    seems.))

    I believe answering that question defeats the purpose of having the "feature".
    I suspected as much.
    I was hoping to add some explanation to the chart forum FAQ, I guess "Body text cannot contain images or links until we are able to verify your account."
    (if this really is the only message new posters get) will have to do.
    I still feel this is more of a hindrance to the quality of the forums than not. As confirmed it seems by Naomi, spammers already have a workaround.
    Sipla, it sounds like we should add this FAQ to this article:
    http://social.technet.microsoft.com/wiki/contents/articles/7359.forums-help-faq-en-us.aspx
    What do you suggest?
    What does the message say to the user who cannot post links and images yet? We should map to that language.
    Thanks!
    Ed Price (a.k.a User Ed), SQL Server Customer Program Manager (Blog,
    Twitter,
    Wiki)
    It says "Body text cannot contain images or links until we are able to verify your account."
    If this means you will get a verify email, then you should get a verify email.  The message infers that either action will be taken by the forum mods that will be apparent to the user or that the user needs to take some sort of action. 
    If this is not the case, the wording needs to be changed; it should not mislead you.  This is an incredibly vague status message.
    I do not have any record of a verify email in my inbox history.  All I have is an email this morning from MSDN Site Support (I also posted a request yesterday in MSDN Site Feedback) asking me which account I needed verified.  I only have one account. 
    Almost immediately after I replied, I was able to post links and photos.  Honestly I do not know which came first though, the "verification" or my reply to the email or someone noticing the thread about compaining about it a month after signing up.

  • Whats point of iphone 5 ,4" screen and lots apps didnt optimized for it ,what will apple do about this ??? THANKS

    Whats point of iphone 5 ,4" screen and lots apps didnt optimized for it ,what will apple do about this ??? THANKS

    JGSwabo wrote:
    I only wait stupid answers from stupid ios users ,and now go on this link and read what Apple order to all developers and thay nead to fix it to May.1 and thay didnt LOL
    http://m.imore.com/apple-advises-developers-app-submissions-need-stop-accessing- udids-star-supporting-retina-and-16x9
    So, we're the "stupid ios users" yet you are the one posting a link to something that simply says what we all said here?
    "Starting May 1, new apps and app updates submitted to the App Store must be built for iOS devices with Retina display and iPhone apps must also support the 4-inch display on iPhone 5. Learn about preparing your apps by reviewing the iOS"
    What part of that statement in your link do you not get?  App developers will or will not make those changes, not Apple.  It is entirely possible some apps will never get updated for retina, as their developers will drop those products and move on to new ones.  Yes, Apple may set certain minimum standards and requirements for inclusion of anyone's app in their storefront (as I already said), but it is entirely up to the developers to actually implement those changes.  Complaining on an Apple forum that a particular developer chose not to is pointless and a waste of everyone's time.

  • Validation At What Point?

    Hi all,
    I have been validating my XML files using XSD's using the following code:
    try {
                parser.setFeature("http://apache.org/xml/features/validation/schema", validate);
                parser.setFeature("http://apache.org/xml/features/validation/schema-full-checking", validate);
                parser.setProperty("http://apache.org/xml/properties/schema/external-noNamespaceSchemaLocation", schemaUrl);
                //schemaUrl is specified as a variable
                //CustomerErrorHandler extends SAX ErrorHandler
                CustomErrorHandler handler = new CustomErrorHandler();
                //Install/Enable the parser to handle parsing errors
                parser.setErrorHandler(handler);
                validXML = true;
            }At what point is the validation actually occuring, is this enough code or do I actually need to parse the file as in: parser.parse(args[0])So please could someone point out at what point the actually validation against an XSD occurs? Is it before or after the file is parsed?
    Thanks,

    xml document gets validated when the document is parsed.
    parser.parse(args[0]);

  • At what point should the storage pool be connected to a replacement DPM server?

    I have backed up the DPMDB and  SQL DB from our "old" DPM server, removed it from the domain, and installed the same version, DPM 2007, SP1, on a new server with the same FQDN.  At what point do I connect the storage pool to the new server? 
    Before restoring the db, or after restoring the db but before doing a dpmsync?  Nowhere in the sea of documentation on migrating and upgrading have I found that little detail mentioned.  Please help!

    Mike, I'm doing another DPM rebuild and upgrade, and I connected the storage pool too soon.  Can I save the situation, or do I need to detach the disks, uninstall DPM, delete the db, reinstall, restore the db from the previous backup, and then attach
    the disks and sync?  Thank you! 

  • Music on portable and what to transfer to new desktop

    I have used my portable for couple of years with my IPod Shuffle. Santa brought new desktop because portable hard drive fading. How do I transfer all my music (besides Apple bought) so that I can use Shuffle on desktop? It appears that I can only import from shuffle Apple bought music. Am I missing something here?
    Thanks in advance.
    Doug

    Probably the most straightforward way to get iTunes onto your second computer is to network it with the first one and copy your iTunes folder across. Start by consolidating your library. When you consolidate, any songs in the iTunes Library that are not in the iTunes Music Folder are copied to the Music Folder and the Library is updated to point to those new files. Files already in the iTunes Music Folder have no changes made to them: Consolidating your library - Windows
    Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
    When you copy the iTunes folder make sure you put it into the default location on the new computer. On a PC this is \Documents and Settings\Username\My Documents\My Music\ (or C:\Username\Music\ in Vista). You should also use the same version of iTunes on both computers.
    You can also use this method with an external hard drive, you drag the folder from the first computer to the external drive and then from the drive to the second computer.
    Some iPods can be used as an external drive and you can use them to move your iTunes (this option isn't available with the iPod Touch): How to use your iPod to move your music to a new computer
    Once you have copied everything over hold down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. Navigate to where you placed the copy of the library file and open it up: How to open an alternate iTunes Library file
    If you have any iTunes purchases in your library don't forget that you'll need to authorise your new computer to play them. Also if you are disposing of the old one remember to deauthorise it so you don't use up one of your allowances: About iTunes Music Store Authorisation and Deauthorisation

  • What configuration of the new macbook pro do I need to run FCS 3 without choppy playback.

    Yep, just wondering what configuration of the new macbook pro do I need to run FCS 3 without choppy playback or lagging.  I'm thinking about the 7200rpm, 2.2ghz, antiglare, 4gb ram, with 1gb GPU graphics card configuration

    Nothing wrong with the computer. Playback is dependent on the media and the drives.

  • It's been two years since Windows 7 64 bit computers came out. At what point is Firefox thinking of providing a browser that is compatible with this. I haven't used Firefox for 2 years as a results. And what exactly is Waterfox?

    If you do a search on the web, you will discover that I am far from the only one who finds that she cannot use Firefox because it is incompatible with Windows 7 64 bit. I'm pretty sure there must be hundreds of thousands of users out there that can not use Firefox for the same reason. At what point are you thinking of updating your browser?
    Also are you connected to Waterfox and is it safe?

    In device manager tick Show hidden devices, under view on the toolbar.
    If DM cannot see it you cannot install a driver, not sure why that hardware will not get detected.

  • "File Browse" type item: at what point the fields mime_type, file_name, last_update_date get their values?

    Hi there,
    I have an issue with "File Browse" type item, my question is: at what point the fields mime_type, file_name, last_update_date get their values? I want to add them to the collection but if I try to do it in Process "On Submit - After Computations and Validations" the values in those fields are still null (that's for the insert, and for the update they have old values). Also I don't seem to be able to add blob to the collection ("File Browse" type item (which has the source as blob database column) can't be assigned as parameter p_blob001 of APEX_COLLECTION.ADD_MEMBER, error is: PLS-00306: wrong number or types of arguments in call to 'ADD_MEMBER').
    What I am trying to do is this: I have parent table (TABLE1), and child table (TABLE2).  In TABLE2 I store documents. I have a main page that is form on TABLE1, and on it I have button "Add documents" that opens popup window with form on TABLE2. On submit of popup page I want to avoid inserting document into TABLE2, instead I want to send data to the main page (using collection) and insert in only once the main page is submitted.
    I would appreciate any advice on this...
    Thanks,
    Tanya

    Hello Tanya,
    Can you post your PL/SQL code which you are trying?
    Regards,
    Hari

  • HT4597 what will be the new alternatives for iWeb publishing,  Idisk & photo gallery ?

    what will be the new alternatives for iWeb publishing,  Idisk & photo gallery ?

    Thanks for the reply that there will be 3rd party support.
    One of the main reasons why I went from PC to Mac was because of all these cool features.
    Am dissapointed to see them leave.  ( Iweb, Photogallery, Idisk... )

  • New URL, how do I get iTunes to point to my new feed

    We are in the process of redesigning our webpage. We purchased a new domain name and changed our webhost. Our new website is www.calvarybible.com. I am wondering how to get iTunes to point to my new feed. It is all the same content just at a new URL. I have sent a few messages via "report a concern", but have not seen any response.
    Any ideas would be greatly appreciated.
    Thanks,
    Mike
    Dell PC   Windows XP  

    Geek,
    Thanks, I set up the <itunes:new-feed-url> tag. When I updated my podcast in iTunes it found the new feed. I should have read the specifications better.
    We will be sending the old domain name to the new URL soon, so I am glad I got this done as it says to keep the old feed for at least 48 hours. Thanks for pointing me in the right direction.
    Thanks,
    Mike

  • SOA 10.1.3.5  - cloning and pointing to a new database

    We plan to move a web application to a new server and here is the information:
    The front-end is SOA suite 10.1.3.5; application was built with Jdeveloper and ADF; BPEL process Manager is not used; Enterprise Service Bus is not used.
    the backend is a Oracle database.
    Old server: Windows server 2003, currently hosting SOA and the database;
    New server: Windows server 2008.
    We need to move both front-end and back-end to the new server. I know how to move the database.
    I would like to know if either of the following is possible:
    1. Clone SOA suite to the new server, and let it point to the new database on the server;
    2. Install SOA 10.1.3.1 on the new server, and upgrade it to 10.1.3.5. Then move the deployed instance from the old server to the new one, and point it to the new database.
    I have read chapter 9 of SOA administrator guide, but not sure if the cloned instance can point to the new database. Please help. Thank you!
    Hailie

    Hello
    Maybe this Metalink note would be helpful for you 757381.1

Maybe you are looking for