At what point must EMCLI clients be upgraded?

Greetings,
I am upgrading to OEM 12c using the 2-System method. The installation of the Repository and OEM is complete, I believe I have completed the necessary setup steps and am attempting to upgrade the agents using the Enterprise Manager 12c Upgrade Console.
I have chosen one agent to upgrade and navigated to the Deploy and Configure Agents page and selected one agent I wish to deploy and configure. This is where things get confusing.
Under agent credentials I have chosen to use Oracle Homre Preferred Credentials and to Override Oracle Home Preferred Credentials choosing the Oracle user.
Under Run Privileges I have chosen None and SUdo trying with either Root or Oracle.
On the next page under Root Credentials I have entered the Root username/password and the Oracle username/password and tried both None and Sudo. When choosing Sudo it seems that root is the only option.
I then submit the job and it fails I have seen errors, either
ERROR: NMO not setuid-root (Unix-only) or
SUDO not present on agent https://<hostname>:3872/emd/main
I have been searching but yet to no avail. I have seen reports indicating that one should “Use credentials, selecting sudo gave error ‘sudo is not present’”. I also found something indicating that it is necessary to use emcli in order to set up sudo but it is not clear to me whether I must do this from the existing OEM or the upgraded OEM and if the emcli clients must be upgraded prior to deploying the agents.
I have found the instructions and download page in the OEM 12c console but am still not clear as to whether this is in fact required. Any suggestions greatly appreciated.
Thank you.
Bill Wagman

pls go through this: http://docs.oracle.com/cd/E24628_01/upgrade.121/e22625/upgrading_10205_111_PS1_agents.htm#CIHHABAD
If you are using option: Use Oracle Home Preferred Credentials then use have to set the oracle home credentails in EM using emcli first. Since in 10g or 11g we neverhad oracle home credentails you cannt use UI do it .
Else use the Override Oracle Home Preferred Credentials and enter one set of credentials that can be used for all Oracle homes. Run Privilege section, by default, None

Similar Messages

Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced.

Can I upgrade to an Intel core 2 Duo processor from my Intel core duo processor ? If so, what all must be replaced. imac
<Edited by Host>

No CPU upgrades possible.
You should not post your serial number or other personal information in this forum.

HT6114 I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS. Since this OS is fairly old, what steps must I follow to get my computer up to date? I seem to recall hearing that it may take several

I have an iMac running OS X 10.5.8, and in order to run newer applications I apparently need to upgrade my OS. Since this OS is fairly old, what steps must I follow to get my computer up to date? I seem to recall hearing that it may take several steps and may require new versions of iWorks and iLife (at least)

The relevant information is:
Model Name:          iMac
Model Identifier:          iMac9,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.93 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          4 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          IM91.008D.B08
Chipset Model:          NVIDIA GeForce GT 120
Type:          Display
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0655
Revision ID:          0x00a1
ROM Revision:          3370
Displays:
iMac:
Resolution:          1920 x 1200
Depth:          32-Bit Color
Core Image:          Hardware Accelerated
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Built-In:          Yes
Display Connector:
Status:          No Display Connected

What are the benifits to Automobile clients by upgrading siebel7.8 to 8.1

what are the benifits to Automobile clients by upgrading siebel7.8 to 8.1
Hi Team,
what are the extra features or functionalities added in Siebel e-auto8.1 when compared to 7.8
please explain functional wise not technical wise like tools
Regards
803178

Right now your only upgrade choices are Yosemite or Lion (if your model cannot be upgraded to Yosemite.)

I'm running Tiger...(yeah, I know). What must I do to upgrade?

I'm running Tiger...(yeah, I know). What must I do to upgrade?

My mini:
Model Name:          Mac mini
Model Identifier:          Macmini1,1
Processor Name:          Intel Core Duo
Processor Speed:          1.83 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache (per processor):          2 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          MM11.0055.B08
SMC Version:          1.3f4

Access points wont accept clients on 2.4 GhZ

Hi
We are having some Issue with some Access Points are dropping clients on 2.4 GhZ radio, the radio is if you SSH to the Access Point "Dot11Radio0 is up, line protocol is up".
Our setup is 2 x Wism2 controller (7.5), a CPI (1.4), and around 750 Access points of various types (1121, 1131, 1142, 2602).
If we reset the Access Point from CPI it comes up and it will again accept clients on 2.4 GhZ for a random time period, sometimes it works for some hours, sometimes for a couple of days, total random.
The once we have seen the problem on is as I know 1142:
Software Version
7.5.102.0
Boot Version
12.4.23.0
AP Model
AIR-LAP1142N-E-K9
IOS Version
15.2(4)JA1$
Hope to get help finding a solution.
Best regards
Jørgen

If you have a high density deployment, you might want to look at your RRM. What is the power set to on the AP's. If the power is set too low, that can cause clients not to see or be able to join an access point. If this is the case, you need to set the min tx power level for the 2.4ghz radio which is under the wireless tab in the 802.11bgn TPC.
If you have an issue with a certain AP model, it might be a bug, but you didn't mention what model AP is was happening to.
Sent from Cisco Technical Support iPhone App

What is the cheapest way to upgrade memory for Macbook Pro

I want to upgrade my memory to 8GB in my MacBook Pro.
Apple are charging $400.
I've seen this for £50. Will it work fine? If not, where can I get the best 8GB memory for a good price?
http://www.google.co.uk/products/catalog?client=safari&rls=en&q=memory+in+macboo k+pro&oe=UTF-8&redir_esc=&um=1&ie=UTF-8&tbm=shop&cid=4523898050101099996&sa=X&ei =I3YhTqz8McHLhAfo55WkAw&ved=0CJ8BEPMCMAg#ps-sellers
Thanks
Steve

ryansmith42 wrote:
It was Kingston memory (KVR1333D3SO/4G; the newer batches are the same part number but are marked by "4GR" following the slash in the number). I did not buy a paired kit as it was not in stock; this may have contributed to the performance drop.
The metric in question was Xbench's Memory Test, specifically the System > Allocate number. Before the upgrade, I routinely benchmarked between 2.5 and 2.9 Malloc/sec (or a score of 750-800). After the Kingston memory upgrade, I never saw figures above 1.6 Malloc/sec (or a score of 420-450); roughly half of what I had seen prior to upgrading.
Since installing my OWC memory (which came in a package of two sticks), the performance is generally identical to the OEM (Hynix) across the board.
Hope that helps/clarifies my observations.
That helps a lot. Thanks very much for clarifying that. Yes, Kingston Value RAM is definitely not the way to go, as it has not been tested for compatibility, nor designed for use in Macs. See my other posts in this thread.
Kington's KTA line, OTOH, is tested for compatibility with Mac systems, comes in matched sets, and is very reliable.
AFA Kingston RAM, bottom line for Mac users:
KVR = bad
KTA = good

It's been two years since Windows 7 64 bit computers came out. At what point is Firefox thinking of providing a browser that is compatible with this. I haven't used Firefox for 2 years as a results. And what exactly is Waterfox?

If you do a search on the web, you will discover that I am far from the only one who finds that she cannot use Firefox because it is incompatible with Windows 7 64 bit. I'm pretty sure there must be hundreds of thousands of users out there that can not use Firefox for the same reason. At what point are you thinking of updating your browser?
Also are you connected to Waterfox and is it safe?

In device manager tick Show hidden devices, under view on the toolbar.
If DM cannot see it you cannot install a driver, not sure why that hardware will not get detected.

In Dreamweaver MySites[New Site] menu option , if I had a hosting JSP/PHP what I must declare the hosting JSP or PHP ?

In Dreamweaver MySites[New Site] menu option , if I had a hosting JSP/PHP what I must declare the hosting JSP or PHP ?

The simplest answer is to choose the language you work best with, and that fits the clients specification the best.
I have mixed server languages on a site before, (would not recommend) when a client has decided they wish to change from their old one to a new(er) /different one, the only thing you must watch if doing this, is that you do not mix languages on the same page (will not work correctly, if at all), and parameter passing.
PZ

'FTP_R3_TO_SERVER' giving sy-subrc = 3 plz help me points must be given

Dear   ,
when i am trying to send data in internal table of type charterter declared below(i.e iresult) to FTP SERVER program giving the DATA ERROR = 3 when 'FTP_R3_TO_SERVER' fuction module is exected and file it not creating in ftp server . plz help me pointS must be given .
the FTP_CONNECT ,FTP_COMMAND function modules are executing properly giving handle 1 and its sy-subrc = 0 .
when 'FTP_R3_TO_SERVER' is executed it is giving SY-SUBRC = 3 ( DATA ERROR ) i.e it is failing to out internal table data in FTP SERVER . PLZ HIDE ME ITS URGENT .
THIS IS CODE I USED .
DATA :     BEGIN OF iresult OCCURS 5,
        rec(450),
       END OF iresult,
DATA :
          dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
          compress TYPE c VALUE 'N',
          host(64) TYPE c.
DATA: hdl TYPE i.
DATA: BEGIN OF result OCCURS 0,
        line(100) TYPE c,
        END OF result.
DATA : key TYPE i VALUE 26101957 ,
         dstlen TYPE i,
         blob_length TYPE i.
host = p_host .
DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
CALL 'AB_RFC_X_SCRAMBLE_STRING'
    ID 'SOURCE'      FIELD p_password    ID 'KEY'         FIELD key
    ID 'SCR'         FIELD 'X'    ID 'DESTINATION' FIELD p_password
    ID 'DSTLEN'      FIELD dstlen.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = p_user
      password        = p_password
      host            = host
      rfc_destination = dest
    IMPORTING
      handle          = hdl
    EXCEPTIONS
      not_connected   = 1
      OTHERS          = 2.
IF sy-subrc = 0.
    CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
    CALL FUNCTION 'FTP_COMMAND'
      EXPORTING
        handle        = hdl
        command       = ftppath
      TABLES
        data          = result
      EXCEPTIONS
        command_error = 1
        tcpip_error   = 2.
    IF sy-subrc = 0 .
      CLEAR result .
      REFRESH result .
      CALL FUNCTION 'FTP_COMMAND'
        EXPORTING
          handle        = hdl
          command       = 'ascii'
        TABLES
          data          = result
        EXCEPTIONS
          command_error = 1
          tcpip_error   = 2.
      IF sy-subrc = 0 .
        DESCRIBE TABLE iresult LINES lines.
        blob_length = lines * width .
        clear : lines.
Delete the existing file
     CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
      CALL FUNCTION 'FTP_COMMAND'
        EXPORTING
          handle        = hdl
          command       = delfile
        TABLES
          data          = result
        EXCEPTIONS
          command_error = 1
          tcpip_error   = 2.
*End of deleting the existing file
        CALL FUNCTION 'FTP_R3_TO_SERVER'
          EXPORTING
            handle        = hdl
            fname         = ftpfile
            blob_length   = blob_length
          TABLES
            blob          = iresult
          EXCEPTIONS
            TCPIP_ERROR   = 1
            COMMAND_ERROR = 2
            DATA_ERROR    = 3
            OTHERS        = 4.
        IF sy-subrc <> 0 .
          WRITE 'Error in writing file to ftp' .
        ELSE.
          WRITE 'File downloaded on the ftp server successfully'.
        ENDIF.
      ENDIF.
    ELSE.
      WRITE : 'Path on ftp not found : ' , ftppath .
    ENDIF.
    CALL FUNCTION 'FTP_DISCONNECT'
      EXPORTING
        handle = hdl.
    CALL FUNCTION 'RFC_CONNECTION_CLOSE'
      EXPORTING
        destination = 'SAPFTP'
      EXCEPTIONS
        OTHERS      = 1.
ELSE.
    WRITE 'Could not connect to ftp' .
ENDIF.
ENDFORM.                    " FTPFINANCEACCESS_DOWNLOAD
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'PASSWORD'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Edited by: manoj kv on Feb 21, 2008 7:51 AM
Edited by: manoj kv on Feb 21, 2008 10:31 AM
Edited by: manoj kv on Feb 23, 2008 5:22 AM
Edited by: manoj kv on Feb 23, 2008 2:59 PM

Dear ,
i exected RSFTP005 program and i got this below output .
SAPFTP check
Check RFC destination SAPFTP...
... OK.
Ping RFC destination SAPFTP...
... OK.
Check RFC destination SAPFTPA...
... OK.
Ping RFC destination SAPFTPA...
... OK.
in our previous discussion u told me that "You will get that file is not in proper format or it might be empty i.e. structure dose not support "
plz tell me how u r telling that file will not get in proper order and which structure does not support .
my client given issue that whole data storing in single line .
plz do the needful help. points must be rewarded .
thanking u .
Edited by: manoj kv on Feb 25, 2008 5:56 AM
Edited by: manoj kv on Feb 26, 2008 9:38 AM
Edited by: manoj kv on Feb 28, 2008 8:04 AM

What else must I do to force data entry other than making the field required in LC 9 Forms Designer?

I am trying to make sure that fields are populated with data prior to moving to the next field, but it seems that simply making the field required is not sufficient. What else must I do to enforce data entry within required fileds?
Thank you,

There are a variety of scripting techniques that can be used based upon the form requirements, UI aesthetics, designer preference,... The script below forces data entry into a text field object called 'tf1' but it is a dangerous practice and should be used carefully. You may find yourself in a infinite loop based upon the tab order. A safer pattern includes global field validation upon submit.
// form1.page1.subform1.tf1::exit - (JavaScript, client)
if (this.isNull) {
xfa.host.messageBox("tf1 is a mandatory field.","Text Field 1 Error",0);
xfa.host.setFocus("form1.page1.subform1.tf1");
Steve

What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?

What file do I need to upgrade SQLServer 2008 R2 on a virtual machine?

Hi Jerry_TKO,
If I understand correctly, you want to update to SQL Server 2008 R2 from earlier version. If in this scenario, we should notice that not all versions and editions are supported to update to SQL Server 2008 R2. For more details about supported versions and
editions in SQL Server 2008 R2, please see:
http://msdn.microsoft.com/en-IN/library/ms143393(v=sql.105).aspx
For local installations, you must run Setup as an administrator. If you install SQL Server from a remote share, you must use a domain account that has read and execute permissions on the remote share. The following document about how to upgrade to SQL Server
2008 R2 is for your reference:
http://msdn.microsoft.com/en-IN/library/ms144267(v=sql.105).aspx
http://www.techrepublic.com/blog/10-things/10-tips-for-upgrading-to-sql-server-2008-r2/
If there are any misunderstanding, please elaborate the issue for further investigation.
Regards,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Buying used GPIB/ENET100 card. What software must have with it. Have LABView 7

Buying used GPIB/ENET100 card. What software must have with it to configure and use. Have LABView 7

Actually, I believe the drivers that are available on the NI website are licened for upgrades only. If the hardware came with an NI-488.2 driver, you can upgrade that to the latest version with the link above.
If your purchase did not include a software license (the hardware is sold separately from the hardware due to single- and multi-user license options), you need to purchase a license of NI-488.2.
http://sine.ni.com/apps/we/nioc.vp?cid=10622〈=US
The part numbers for the single and multi-user license for Windows are 778598-02 and 778598-01. Other operating systems are listed as well.
If you have any confusion, you should contact NI to confirm licensing issues.

Windows 7 upgrade advisor, from Vista, says that Firefox must be uninstalled before upgrading and that I won't be able to reinstall it, is this true?

I am currently running Vista, 32-bit. I am considering upgrading to Windows 7. I ran the Upgrade Advisor Report and it says "Mozilla Firefox 20.0.1 Must be uninstalled before upgrading to Windows 7. You will not be able to reinstall it after upgrading to Windows 7." This appears to be inaccurate info, based on the Firefox website, but I want to verify what I should do before beginning the upgrade. Leave Firefox installed and in place when I upgrade, or uninstall and then re-install after the upgrade?

hello herplaw, you're right, this doesn't sound right - firefox will run fine on windows 7. i'd leave it installed and go ahead with the update. in any case (if you'd have to reinstall it later) you could also back-up the personal information that is stored in your firefox profile before you proceed: [[Back up and restore information in Firefox profiles]]

Need to know at what point does file get copied to table

Hi.
I'm looking at the file browse page item and wanted to find out at what point does the file's data get placed in wwv_flow_files?
Does it do it automatically on page submit/refresh?

Hi Alistair,
there is no name for this process since it is not an APEX process. The mod_plsql or
PL/SQL embedded Gateway code is responsible for this. That's also the reason why
this must be configured in the modplsql's dads.conf file.
The insertion of files into WWV_FLOW_FILES is a process which you cannot
influence in an APEX environment. What you can do is coding an onSubmit process
which SELECTs the file from WWV_FLOW_FILES and inserts it into your own
table ... but the file will always take the path via WWV_FLOW_FILES
Does this help ...?
-Carsten
Oracle 11g Release 2 ist freigegeben!
http://www.oracle.com/global/de/community/index.html
SQL und PL/SQL: Tipps, Tricks & Best Practice
http://sql-plsql-de.blogspot.com

At what point must EMCLI clients be upgraded?

Similar Messages

Maybe you are looking for